Kenmore Elite 796.7162, Elite 796.6162 User Manual

Download

Page 1

Use & Care Guide Manual de Uso y Cuidado

English / Español

Model/Modelo: 796.6162#, 796.7162#

Kenmore Elite®

Dryer

Secadora

# = color number, numero de color

P/N MFL67652507

Sears Brand Management Corporation Hoﬀ man Estates, IL 60179 U.S.A.

www.kenmore.com www.sears.com

Page 2

TABLE OF CONTENTS

PROTECTION AGREEMENTS

IMPORTANT SAFETY INSTRUCTIONS ....................3-6

GROUNDING REQUIREMENTS ................................... 4

FEATURES AND BENEFITS

Key Parts and Components ........................................7

Optional Accessories .................................................. 7

INSTALLATION INSTRUCTIONS

Key Dimensions and Speciﬁ cations ..........................8

Location Requirements ................................................8

Choose the Proper Location ....................................... 8

Clearances ....................................................................8

Gas Dryers .....................................................................9

Gas Requirements .................................................9

Electrical Requirements .........................................9

Connecting the Gas Supply ............................... 10

Electric Dryers .............................................................11

Electrical Requirements ........................................11

Connecting Electric Dryers ................................ 12

Venting the Dryer .................................................13-14

Leveling the Dryer ..................................................... 15

Reversing the Door Swing ........................................ 16

Final Installation Check ............................................ 17

HOW TO USE

Control Panel Features ............................................. 18

Operating the Dryer ................................................. 19

Cycle Guide .........................................................20-21

Sorting Loads .............................................................22

Loading the Dryer .....................................................22

Time and Status Display ..........................................23

Cycle Modiﬁ er Buttons ............................................ 24

Cycle Options and Special Features ......................25

Steam Features ....................................................26-27

USER MAINTENANCE INSTRUCTIONS

Regular Cleaning ..................................................... 28

Cleaning the Exterior ......................................... 28

Cleaning the Interior .......................................... 28

Cleaning Around and Under the Dryer ........... 28

Cleaning the Lint Filter ...................................... 28

Maintaining the Exhaust System ....................... 29

Kenmore Connect® System ................................... 30

TROUBLESHOOTING GUIDE

Before Calling for Service ................................. 31-33

WARRANTY ...................................................................34

SERVICE .......................................................... Back Cover

PRODUCT RECORD

In the space below, record the date of purchase, model, and serial number of your product. You will ﬁ nd the model and serial number printed on an identiﬁ cation plate located inside the dryer door. Have these items of information available whenever you contact Sears concerning your product.

Model No. Date of Purchase Serial No. Save these instructions and your sales receipt for future

reference.

Master Protection Agreements

Congratulations on making a smart purchase. Your new Kenmore

product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when having a Master Protection Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend the life of your new product. Here’s what the Agreement* includes:

• Parts and labor needed to help keep products

operating properly under normal use, not just defects. Our coverage goes well beyond the product warranty. No deductible, no functional failure excluded from coverage – real protection.

• Expert service by a force of more than 10,000

authorized Sears service technicians, which means someone you can trust will be working on your product.

• Unlimited service calls and nationwide service, as often

as you want us, whenever you want us.

• “No-lemon” guarantee – replacement of your

covered product if four or more product failures occur within 12 months.

• Product replacement if your covered product can not

ﬁ xed.

• Annual Preventive Maintenance Check at your request

– no extra charge.

• Fast help by phone – we call it Rapid Resolution.

Phone

support from a Sears representative on all

products. Think of us as a “talking owner’s manual.”

Power surge protection against electrical damage due

•

power ﬂ uctuations.

• $250 food loss protection annually for any food

spoilage that is the result of mechanical failure of any covered refrigerator or freezer.

• Rental reimbursement if repair of your covered

product takes longer than promised.

• 25% discount oﬀ the regular price of any non-covered

repair service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call at any time day or night or schedule a service appointment online.

The Master Protection Agreement is a risk-free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund, or a prorated refund anytime after the product warranty period expires. Purchase your Master Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-827-6655.

*Coverage in Canada varies on some items. For full details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. or Canada call: 1-800-4-MY-HOME

Page 3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words mean:

DANGER:

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

WARNING: CAUTION:

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

For your safety, the information in this manual must be followed to

WARNING:

minimize the risk of ﬁ re or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

• Do not install a clothes dryer with ﬂ exible plastic venting materials. If a ﬂ exible metal (foil type) duct is installed, it must be of a speciﬁ c type identiﬁ ed by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airﬂ ow and increase the risk of ﬁ re.

• Do not store or use gasoline or other ﬂ ammable vapors and liquids in the vicinity of this appliance or any other appliances.

• Installation and service must be performed by a qualiﬁ ed installer, service agency, or the gas supplier.

• Install the clothes dryer according to the manufacturer’s instructions and local codes.

• Save these instructions.

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

WHAT TO DO IF YOU SMELL GAS:

1. Do not try to light a match or cigarette, or turn on any gas or electrical appliance.

2. Do not touch any electrical switches. Do not use any phones in your building.

3. Clear the room, building, or area of all occupants.

4. Immediately call your gas supplier from a neighbor’s phone. Carefully follow the gas supplier’s instructions

5. If you cannot reach your gas supplier, call the ﬁ re department.

SAVE THESE INSTRUCTIONS

Page 4

IMPORTANT SAFETY INSTRUCTIONS

BASIC SAFETY PRECAUTIONS

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance,

WARNING:

follow basic precautions, including the following:

• Read all instructions before using the dryer.

• Before use, the dryer must be properly installed, as described in this manual.

• Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch ﬁ re.

• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances, as they give oﬀ vapors that could ignite or explode.

• Do not reach into the dryer if the drum or any other part is moving.

• Do not repair or replace any part of the dryer or attempt any servicing unless speciﬁ cally recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

• Do not tamper with controls.

• Before the dryer is removed from service or discarded, remove the door to the drying compartment.

• Do not allow children to play on or in the dryer. Close supervision of children is necessary when the dryer is used near children.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

• Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

• Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

• The interior of the dryer and exhaust vent should be cleaned periodically by qualiﬁ ed service personnel.

• Do not install or store the dryer where it will be exposed to the weather.

• Always check the inside of the dryer for foreign objects.

• Clean the lint ﬁ lter before or after each load.

• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT

This act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects, or other reproductive harm and requires businesses to warn customers of potential exposure to such substances. Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance must be equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of

WARNING:

electric shock. Check with a qualiﬁ ed electrician or service person if you are in doubt as to whether the appliance

is properly grounded. Do not modify the plug provided with the appliance. If it will not ﬁ t the outlet, have a proper outlet installed by a qualiﬁ ed electrician. This appliance must be connected to a grounded metal, permanent wiring system or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance. Electrical shock can result if the dryer is not properly grounded.

Page 5

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS FOR INSTALLATION

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance,

WARNING:

follow basic precautions, including the following:

• Properly ground dryer to conform with all governing codes and ordinances. Follow details in the installation

instructions. Electrical shock can result if the dryer is not properly grounded.

• Before use, the dryer must be properly installed as described in this manual. Electrical shock can result if

the dryer is not properly grounded.

• Install and store the dryer where it will not be exposed to temperatures below freezing or exposed to the weather.

• All repairs and servicing must be performed by an authorized service technician unless speciﬁ cally recommended in this Owner’s Guide. Use only authorized factory parts. Failure to follow this warning

can cause serious injury, ﬁ re, electrical shock, or death.

• To reduce the risk of electrical shock, do not install the dryer in humid spaces. Failure to follow this warning

can cause serious injury, ﬁ re, electrical shock, or death.

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper

power circuits can melt, creating risk of electrical shock and/or ﬁ re hazard.

• Remove all packing items and dispose of all shipping materials properly. Failure to do so can result in death,

ﬁ re, explosion, burns, or death.

• Place dryer at least 18 inches above the ﬂ oor for a garage installation. Failure to do so can result in ﬁ re,

explosion, burns, or death.

• Keep all packaging from children. Packaging material can be dangerous for children. There is a risk of suﬀ ocation.

• Do not install near items that produce heat or open

ﬂ ame such as stoves or cooking ovens. Failure to follow this warning can cause product deformation, smoke and ﬁ re.

• Do not place candles or cigarettes on top of the product. Failure to follow this warning can cause

product deformation, smoke and ﬁ re.

• Remove all protective vinyl ﬁ lm from the product. Failure to do so can cause product deformation, smoke and ﬁ re.

Exhaust/Ducting:

• Gas dryers MUST be exhausted to the outside. Failure

to follow these instructions can result in ﬁ re or death.

• The dryer exhaust system must be exhausted to the outside of the dwelling. If the dryer is not exhausted outdoors, some ﬁ ne lint and large amounts of moisture will be expelled into the laundry area. An

accumulation of lint in any area of the home can create a health and ﬁ re hazard.

• Use only rigid metal or ﬂ exible metal 4 inch diameter duct inside the dryer cabinet or for exhausting to the outside. Use of plastic or other combustible ductwork can cause a ﬁ re. Punctured ductwork can cause a ﬁ re

if it collapses or becomes otherwise restricted in use or during installation.

• Ductwork is not provided with the dryer, and you should obtain the necessary ductwork locally. The end cap should have hinged dampers to prevent backdraft when the dryer is not in use. Failure to follow these

instructions can result in ﬁ re or death.

• The exhaust duct must be 4 inches (10.2 cm) in diameter with no obstructions. The exhaust duct should be kept as short as possible. Make sure to clean any old ducts before installing your new dryer.

Failure to follow these instructions can result in ﬁ death.

• Rigid or semi rigid metal ducting is recommended for use between the dryer and the wall. In special installations when it is impossible to make a connection with the above recommendations, a UL listed ﬂ exible metal transition duct may be used between the dryer and wall connection only. The use of this ducting will aﬀ ect drying time. Failure to

follow these instructions can result in ﬁ re or death.

• DO NOT use sheet metal screws or other fasteners which extend into the duct that could catch lint and reduce the eﬃ ciency of the exhaust system. Secure

all joints with duct tape. For complete details, follow the Installation Instructions. Failure to follow these instructions can result in ﬁ re or death.

re or

Page 6

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS FOR STEAM FUNCTIONS

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance,

WARNING:

follow basic precautions, including the following:

• Do not open the dryer door during steam cycles. Failure to follow these instructions can result in a burn hazard.

• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances as they give oﬀ vapors that could ignite or explode. Failure to follow these instructions can result in ﬁ re or death.

• Do not ﬁ ll the steam feeder with gasoline, dry- cleaning solvents, or other ﬂ ammable or explosive substances. Failure to follow these instructions can result in ﬁ re or death.

• Do not touch the steam nozzle in the drum during or after the steam cycle. Failure to follow these instructions can result in a burn hazard.

• Do not ﬁ ll the steam feeder with hot water (over 86°F/30°C). Failure to follow these instructions can result in a burn hazard.

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance,

WARNING:

follow basic precautions, including the following:

• Do not, under any circumstances, cut or remove the ground prong from the power cord. To prevent

personal injury or damage to the dryer, the electrical power cord must be plugged in to a properly grounded outlet.

• For personal safety, this dryer must be properly grounded. Failure to do so can result in electrical

shock or injury.

• Refer to the installation instructions in this manual for speciﬁ c electrical requirements for your model.

Failure to follow these instructions can create an electrical shock hazard and/or a ﬁ re hazard.

• This dryer must be plugged in to a properly grounded outlet. Electrical shock can result if the dryer is not properly grounded. Have the wall outlet and circuit checked by a qualiﬁ ed electrician to make sure the outlet is properly grounded. Failure to follow these

instructions can create an electrical shock hazard and/or a ﬁ re hazard.

• Never unplug your dryer by pulling on the power cord. Always grip the plug ﬁ rmly and pull straight out from the outlet. The power cord can be damaged,

resulting in a risk of ﬁ re and electrical shock.

• Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. The power cord can

melt, creating electrical shock and/or ﬁ re hazard.

• When installing or moving the dryer, be careful not to pinch, crush, or damage the power cord. This will

prevent injury and prevent damage to the dryer from ﬁ re and electrical shock.

• The dryer should always be plugged in to its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best

performance and also prevents overloading house wiring circuits which could cause a ﬁ re hazard from overheated wires.

Page 7

FEATURES AND BENEFITS

KEY PARTS AND COMPONENTS

There are several important components that are referenced in this manual.

EASY-TO-USE CONTROL PANEL

Rotate the cycle selector knob to select the desired dry cycle. Add cycle options or adjust settings with the touch of a button.

TIME AND STATUS DISPLAY

The easy-to-read LED display shows cycle status and estimated time remaining.

CYCLE MODIFIERS

Adjust the cycle defaults such as temperature and dry level with the touch of a button.

NOTE: Not all settings are available for all cycles.

STEAM FEEDER

This lid provides access to the reservoir for the water used by the dryer to create steam for the steam cycles and other steam features.

CHECK VENT

(Duct Blockage Sensing System) The CHECK VENT (Duct blockage sensing system) detects and alerts you to blockages in the exhaust system that reduce airﬂ ow from the dryer. Maintaining clean exhaust system ducts improves operating eﬃ ciency and helps minimize service calls, saving you money.

A E B

Terminal Block Access Panel (Electric Models)

Power Cord Location (Gas Models)

LARGE CAPACITY STEEL DRUM WITH DRUM LIGHT

The ultra-large stainless steel drum oﬀ ers superior durability. The drum light can be turned on during a cycle by using the DRUM LIGHT button on the control panel. The light also comes on when the door is opened, if the control is ON.

EASY-ACCESS REVERSIBLE DOOR

The wide-opening, see-through glass door provides easy access for loading and unloading. Door swing can be reversed to adjust for installation location.

FRONT-MOUNT LINT FILTER

The front-mount lint ﬁ lter allows for easy access and cleaning between loads.

LEVELING FEET

Four leveling feet (two in front, and two in back) adjust to improve dryer stability on uneven ﬂ oors.

OPTIONAL ACCESSORIES

Use the side vent kit for venting directly to either side or to the bottom. Gas dryers can

not be vented to the right. Kit # D26-49670

Gas Connection Location (Gas Models)

Exhaust Duct Outlet

Rear of Dryer

Use the LP conversion kit for changing the dryer gas connections from natural gas (NG) to propane gas

(LP). Part No. 383EEL3002D NOTE: Installation of the LP conversion kit must

be performed by a qualiﬁ ed service technician in accordance with local codes .

Page 8

INSTALLATION INSTRUCTIONS

KEY DIMENSIONS AND SPECIFICATIONS

Description Dryer Dryer (Gas and Electric) Electrical Requirements Refer to the rating label Gas Requirements* NG: 4–10.5 inches WC Gas Requirements* LP: 8–13 inches WC

Dimensions 27 in. (W) X 29.4 in. (D) X 45 in. (H), 50

in. (D with door open)

68.6 cm (W) X 73.4 cm (D) X 114.1 cm (H), 127.5 cm (D with door open)

Net Weight Electric : 133.8 lb. (60.7kg) Gas : 137.3 lb. (62.3kg) Drying Capacity IEC 7.3 cu. ft.

*Gas Models Only

LOCATION REQUIREMENTS

IMPORTANT: Read all installation instructions

completely before installing and operating your dryer. It is important that you review this entire manual before installing and using your dryer. It contains detailed

21 e

 cm)

instructions concerning electrical connections, gas connections and exhaust requirements.

CHOOSE THE PROPER LOCATION

• Store and install the dryer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.

• Choose a location with a solid, level ﬂ oor.

• If the dryer is being installed in a garage, place the dryer at least 18 inches (45.7cm) above the ﬂ oor.

• Properly ground the dryer to conform with all governing codes and ordinances.

• To reduce the risk of electric shock, do not install the dryer in damp or wet locations.

IMPORTANT: If you are installing your dryer in a manufactured or mobile home, please refer to the

Special Electrical Requirements for Mobile or Manufactured Homes section.

CLEARANCES

• Most installations require a minimum 5 ½ inch (14 cm) clearance behind the dryer for the exhaust ducting.

• Allow minimum clearances of at least 1 inch (2.5 cm) on the sides and back to minimize vibration and noise.

• Allowing additional clearance for installation and servicing is recommended.

• Be sure to allow for wall, door, or ﬂ oor moldings that may increase the required clearances.

• Allow at least 21 inches (53.3 cm) in front of the dryer to open the door.



(10 cm)

Additional instructions for closet installations:

The closet door must allow for suﬃ cient airﬂ ow. Refer to the diagram above for minimum vent opening requirements. A louvered door is also acceptable.

28 e  cm)

50 e

(127.5 cm)



(10 cm)

(7.6 cm)

48 in.

(310 cm)

34 in.

(155 cm)

(7.6 cm)

Closet Door Clearance Requirements



(2.5 cm)



 cm)



(2.5 cm)

Page 9

GAS DRYERS

GAS REQUIREMENTS (GAS MODELS ONLY)

WARNING:

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

INSTALLATION INSTRUCTIONS

• Gas supply requirements: As shipped from the factory, this dryer is conﬁ gured for use with natural gas (NG). It can be converted for use with propane (LP) gas. Gas pressure must not exceed 8 inches water column for (NG), or 13 inches water column for (LP).

• A qualiﬁ ed service or gas company technician must connect the dryer to the gas service. Failure to follow

these instructions can result in ﬁ re, explosion, or death.

• Isolate the dryer from the gas supply system by closing its individual manual shutoﬀ valve during any pressure testing of the gas supply. Failure to do so can

result in ﬁ re, explosion, or death.

• Supply line requirements: Your laundry room must have a rigid gas supply line to your dryer. In the United States, an individual manual shutoﬀ valve MUST be installed within at least 6 ft. (1.8 m) of the dryer, in accordance with the National Fuel Gas Code ANSI Z223.1 or Canadian gas installation code CSA B149.1. A ⅛ inch NPT pipe plug must be installed.

Failure to do so can result in ﬁ re, explosion, or death.

• If using a rigid pipe, the rigid pipe should be ½ inch IPS. If acceptable under local codes and ordinances and when acceptable to your gas supplier, ⅜ inch approved tubing may be used where lengths are less than 20 ft. (6.1 m). Larger tubing should be used for lengths in excess of 20 ft. (6.1 m). Failure to do so can

result in ﬁ re, explosion, or death.

• Connect the dryer to the type of gas shown on the nameplate. Failure to do so can result in ﬁ re,

explosion, or death.

• To prevent contamination of the gas valve, purge the gas supply of air and sediment before connecting the gas supply to the dryer. Before tightening the connection between the gas supply and the dryer, purge remaining air until the odor of gas is detected.

Failure to do so can result in ﬁ re, explosion, or death.

• DO NOT use an open ﬂ ame to inspect for gas leaks. Use a noncorrosive leak detection ﬂ uid. Failure to do

so can result in ﬁ re, explosion, or death.

• Use only a new AGA- or CSA-certiﬁ ed gas supply line with ﬂ exible stainless steel connectors. Failure to

do so can result in ﬁ re, explosion, or death.

• Securely tighten all gas connections. Failure to do so can result in ﬁ re, explosion, or death.

• Use Teﬂ on tape or a pipe-joint compound that is insoluble in propane (LP) gas on all pipe threads.

Failure to do so can result in ﬁ re, explosion, or death.

• DO NOT attempt any disassembly of the dryer; disassembly requires the attention and tools of an authorized and qualiﬁ ed service technician or company. Failure to follow this warning can result in ﬁ re,

explosion, or death.

ELECTRICAL REQUIREMENTS FOR GAS MODELS ONLY

• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. Failure

to follow this warning can result in ﬁ re, explosion, or death.

• For personal safety, this dryer must be properly grounded. Failure to follow this warning can result in

ﬁ re, explosion, or death.

• The power cord of this dryer is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Failure to follow this warning can result in

ﬁ re, explosion, or death.

• This dryer must be plugged into a 120-VAC, 60-Hz.

grounded outlet protected by a 15-ampere fuse or circuit breaker. Failure to follow this warning can result

in ﬁ re, explosion, or death.

• Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Failure to follow this warning can result in

ﬁ re, explosion, or death.

3-prong grounding type wall receptacle

Ensure proper ground exists

before use. 3-prong grounding plug

Page 10

INSTALLATION INSTRUCTIONS

GAS DRYERS (continued)

To reduce the risk of ﬁ re,

WARNING:

electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

• Installation and service must be performed by a qualiﬁ ed installer, service agency, or the gas supplier.

Failure to do so can result in ﬁ re, explosion, or death.

• Use only a new stainless steel ﬂ exible connector and a new AGA-certiﬁ ed connector. Failure to do so can

result in ﬁ re, explosion, or death.

• A gas shutoﬀ valve must be installed within 6 ft. (1.8 m) of the dryer. Failure to do so can result in ﬁ re,

explosion, or death.

• The dryer is conﬁ gured for natural gas when shipped from the factory. Make sure that the dryer is equipped with the correct burner nozzle for the type of gas being used (natural gas or propane gas).

Failure to do so can result in ﬁ re, explosion, or death.

CONNECTING THE GAS SUPPLY

NOTE: This dryer is conﬁ gured from the factory set for natural gas (NG). If the dryer is to be used with propane (LP) gas, it must be converted by a qualiﬁ ed service technician.

Make sure that the gas supply to the laundry room is turned OFF and the dryer is unplugged. Conﬁ rm that the type of gas available in your laundry room is appropriate for the dryer.

Remove the shipping cap from the gas ﬁ tting at the back of the dryer. Be careful not to damage the threads of the gas connector when removing the shipping cap.

Connect the dryer to your laundry room’s gas supply using a new ﬂ exible stainless steel connector with a ⅜ inches NPT ﬁ tting.

NOTE: DO NOT use old connectors.

Securely tighten all connections between the dryer and your laundry room’s gas supply.

Turn on your laundry room’s gas supply.

Check all pipe connections (both internal and external) for gas leaks with a noncorrosive leak-detection ﬂ uid.

Proceed to Venting the Dryer (refer to pages 13-14).

• If necessary, the correct nozzle (for the LP nozzle kit, order part number 383EEL3002D) should be installed by a qualiﬁ ed technician and the change should be noted on the dryer. Failure to do so can result in ﬁ re,

explosion, or death.

• All connections must be in accordance with local codes and regulations. Failure to do so can result in

ﬁ re, explosion, or death.

• Gas dryers MUST exhaust to the outdoors. Failure to do so can result in ﬁ re, explosion, or death.

⅜ in. NPT Gas

Connection

AGA/CSA-Certified Stainless Steel Flexible Connector

⅛ in. NPT Pipe Plug

Gas Supply Shutoff Valve

High-Altitude Installations

The BTU rating of this dryer is AGA-certiﬁ ed for elevations below 10,000 feet.

If your gas dryer is being installed at an elevation above 10,000 feet, it must be derated by a qualiﬁ ed technician or gas supplier.

Page 11

ELECTRIC DRYERS

ELECTRICAL REQUIREMENTS

To help prevent ﬁ re,

WARNING:

electrical shock, serious injury, or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations. Please contact a qualiﬁ ed electrician to check your home’s wiring and fuses to ensure that your home has adequate electrical power to operate the dryer.

Special Electrical Requirements for Mobile or Manufactured Homes

INSTALLATION INSTRUCTIONS

Electrical Requirements for Electric Models Only

WARNING:

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

• This dryer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer. Failure to do so can result in ﬁ re,

explosion, or death.

To reduce the risk of ﬁ re,

WARNING:

electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

• Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards Title 24 CFR, Part 32-80 or Standard CAN/CSA0Z240 MH and local codes and ordinances.

• A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996. Failure to follow

this requirement can result in ﬁ re, explosion, or death.

• The dryer has its own terminal block that must be connected to a separate 240 VAC, 60-Hertz, single phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). ELECTRICAL SERVICE FOR THE DRYER SHOULD BE OF THE MAXIMUM RATE VOLTAGE LISTED ON THE NAMEPLATE. DO NOT CONNECT THE DRYER TO A 110-, 115-, OR 120VOLT CIRCUIT. Failure to follow these instructions can

result in ﬁ re, explosion, or death.

• If the branch circuit to the dryer is 15 ft. (4.5 m) or less in length, use UL (Underwriters Laboratories) listed No.-10 AWG wire (copper wire only), or as required by local codes. If over 15 ft. (4.50 m), use UL-listed No.-8 AWG wire (copper wire only), or as required by local codes. Allow suﬃ cient slack in the wiring so the dryer can be moved from its normal location when necessary. Failure to do so can result in

ﬁ re, explosion, or death.

• The power cord (pigtail) connection between the wall receptacle and the dryer terminal block IS NOT supplied with the dryer. The type of pigtail and gauge of wire must conform to local codes and with instructions on the following pages. Failure to follow

these instructions can result in ﬁ re, explosion, or death

• A 4-wire connection is required for all new construction after January 1, 1996. A 4-wire connection must be used where local codes do not permit grounding through the neutral wire. Failure to

do so can result in ﬁ re, explosion, or death.

Page 12

INSTALLATION INSTRUCTIONS

ELECTRIC DRYERS (continued)

CONNECTING ELECTRIC DRYERS

WARNING:

Connect the power cord to the terminal block. Each colored wire should be connected to the same color screw. Wire color indicated on manual is connected to the same color screw in block. Failure to follow these instructions may result in a short or overload.

Grounding through the neutral conductor is prohibited for: (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor.

Four-Wire Power Cord

• A 4-wire connection is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996.

• A UL-listed strain relief is required.

• Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends.

Te r minal Block

UL-Listed Strain Relief

UL-Listed 4-Wire Power Cord

Remove the terminal block access cover on the upper

back of the dryer. Install a UL-listed strain relief into the power cord

through-hole. Thread a 30-amp, 240-volt, 4-wire, UL-listed power

cord with #10 AWG-minimum copper conductor through the strain relief.

Hot

(Black)

Neutral (White)

Hot (Red)

Three-Wire Power Cord

• A 3-wire connection is NOT permitted on new construction after January 1, 1996.

• A UL-listed strain relief is required.

• Use a 30-amp, 240-volt, 3-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends.

Te r minal Block

UL-Listed Strain Relief

UL-Listed 3-Wire Power Cord

Remove the terminal block access cover on the upper

back of the dryer. Install a UL-listed strain relief into the power cord

through-hole.

Thread a 30-amp, 240-volt, 3-wire, UL-listed power cord with #10 AWG-minimum copper conductor through the strain relief.

Hot

(Black)

Neutral (White)

Hot (Red)

Ground Screw

Power Cord Ground Wire

Transfer the dryer’s ground wire from behind the green

White wire moved from ground screw

ground screw to the center screw of the terminal block. Attach the two hot leads of the power cord to the outer

terminal block screws. Attach the white neutral wire to the center screw of

the terminal block. Attach the power cord ground wire to the green

ground screw.

TIGHTEN ALL SCREWS SECURELY.

Reinstall the terminal block access cover.

Ground Screw

White wire from dryer harness

Attach the two hot leads (black and red) of the power cord to the outer terminal block screws.

Attach the neutral (white) wire to the center terminal block screw.

Connect the external ground (if required by local codes) to the green ground screw.

TIGHTEN ALL SCREWS SECURELY. Reinstall the terminal block access cover.

Page 13

VENTING THE DRYER

INSTALLATION INSTRUCTIONS

IMPORTANT!

CHECK YOUR EXHAUST SYSTEM FOR PROBLEMS

The most common cause of dryer problems is poor exhaust venting. Before installing your new dryer, check the

items listed below to make sure you get the best possible performance. This can save you time and money by reducing cycle times and increasing energy eﬃ ciency.

• DIRTY OR DAMAGED EXHAUST DUCTS. Lint builds up in exhaust ducts over time. This decreases the airﬂ ow and

makes the dryer work harder. Visually inspect your ducts from both ends and have them cleaned if they have not been cleaned recently.

• WRONG VENT MATERIAL. Check your vent to make sure it is rigid or semi-rigid metal ducting. If your venting is

plastic or ﬂ exible foil, have it replaced before using the dryer.

• RESTRICTED OR DAMAGED VENT HOOD. Check your vent hood outside. It must be clean and free of lint buildup.

Check the damper and make sure it opens fully and easily.

• EXCESSIVELY LONG VENT. Measure the length of your exhaust system and count the elbows. Use the chart below

to see if your duct is too long. If it is too long, have the duct routed to another location that is within the venting guidelines.

• DO NOT USE PLASTIC OR FOIL VENTING. The transition duct from your dryer to the wall must be rigid or

semi-rigid metal ducting. If your old transition duct is plastic or foil, REPLACE IT with semi-rigid metal ducting.

Using the DUCT LENGTH CHART (below)

Find your vent hood type in the chart below.

Select the row that matches the number of elbows in your dryer duct run. Look to the right of the elbow number for the maximum duct length for your installation. Longer duct length will result

in reduced drying performance, longer dry times and increased energy consumption. Extremely long ducts can even shorten the life of the dryer.

DO NOT exceed the maximum length for the vent hood type and number of elbows used.

DUCT LENGTH CHART

Maximum length of 4" (10.2 cm )

diameter rigid metal duct

65 feet (19.8 m)

55 feet (16.8 m)

47 feet (13.7 m)

36 feet (11.0 m)

28 feet (8.5 m)

55 feet (16.8 m)

47 feet (13.7 m)

41 feet (12.5 m)

Vent Hood Type

Recommended

(10.2 cm )

Only for Short-Run Installations

(10.2 cm )

Number of 90°

Elbows

(2.5)

(6.35 cm )

30 feet (9.1 m)

22 feet (6.7 m)

NOTE: Deduct 6 ft. (1.8 m) for each additional elbow. Using more than four 90° elbows is not recommended.

Page 14

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

VENTING THE DRYER (continued)

Routing and Connecting Ductwork

Follow the guidelines below to maximize dryer performance and reduce lint buildup and condensation in the ductwork.

NOTE: Transition duct and ﬁ ttings are NOT included and must be purchased separately.

• Use 4 inch (102mm) diameter rigid or semi-rigid metal duct.

• The exhaust duct run should be as short as possible.

• Use as few elbow joints as possible.

• The male end of each section of exhaust duct must point away from the dryer.

• Use duct tape on all joints. Never use screws.

• Insulate ducts that run through unheated areas in order to reduce condensation and lint buildup on duct surfaces.

• The total length of semi-rigid metal transition duct should not exceed 8 ft. (2.4 m).

Correct Venting

Incorrect Venting

WARNING:

Failure to follow these guidelines will result in poor performance, product failure, and/or result in ﬁ re or death.

IMPORTANT: Failure to exhaust the dryer, per the guidelines included within these instructions, may result in unsatisfactory dryer performance. All venting and ductwork beyond the exterior of the dryer is the responsibility of the consumer. Product failure, as a result of improper venting, is not covered by the manufacturer’s warranty.

Connecting the Dryer Vent

Verify all ducts and elbows are clean and free from any blockages.

Measure duct length. DO NOT exceed the maximum length listed in the Duct Length Chart.

Connect dryer exhaust to existing duct.

• Only use duct tape or clamps.

• DO NOT use screws to secure ductwork.

• Use rigid or semi-rigid metal ducts.

• DO NOT use plastic or thin metal foil tubing for ductwork.

• The male end of each elbow must always point in the direction of the airﬂ ow.

Male

Ends

NOTE: Be careful when moving the dryer into its ﬁ nal location. Do NOT crush the duct. Make sure the connections do not come loose.

Page 15

LEVELING THE DRYER

INSTALLATION INSTRUCTIONS

WARNING:

• Wear gloves during installation.

• Failure to follow these instructions can result in injury. To ensure that the dryer provides optimal drying

performance, it must be level. To minimize vibration, noise, and unwanted movement, the ﬂ oor must be a level, solid surface.

NOTE: Adjust the leveling feet only as far as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate.

Level

Leveling Feet

Position the dryer in the ﬁ nal location. Place a level across the top of the dryer.

All four leveling feet must rest solidly on the ﬂ oor. Gently push on the top corners of the dryer to make sure that the dryer does not rock from corner to corner.

Use a wrench to turn the leveling feet. Turn the

leveling foot clockwise to raise the dryer; turn the foot counterclockwise to lower the dryer. Using a level to check, adjust the feet until the dryer is level from side to side and front to back. Make sure all four feet are in ﬁ rm contact with the ﬂ oor.

NOTE: If you are installing the dryer on the optional pedestal, the dryer leveling feet should be fully retracted. Use the leveling feet on the pedestal to level the dryer.

Page 16

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

REVERSING THE DOOR

WARNING:

THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow the instructions below can result in damage to

the dryer, property damage or personal injury.

Hinge assembly

Hole cap

Open the door and remove the two plastic hole

caps on the catch side by gently prying up with a ﬂ at blade screwdriver. Save these for step 6.

CAUTION: Be sure to support the weight of the door before removing the hinge screws.

Remove the four screws securing the hinges to the door frame. Remove the two plastic cover caps on the side opposite the hinges. Reinstall the hinges and cover caps on the opposite sides from which they were removed.

Cover cap

Hinge Screw

While supporting the door, remove the four screws, two from each hinge. Set the door aside face down on a protected surface to prevent damage to the door or the work surface.

inner door frame

latch hook

With the door on a protected surface, remove the 16 screws on each side of the door and lift oﬀ the inner door frame using a ﬂ at blade screwdriver. Remove the latch hook and blank and move them to the opposite side.

With the hinges and cover caps in the new

locations, remount the inner door frame onto the outer door frame with the screws removed in step

Reinstall the door with the screws from step 2, and snap the hole caps into the open hinge mounting holes.

Swing Door

Test the swing of the door to make sure the hinges and latch are properly aligned and that the door closes and latches.

Page 17

INSTALLATION INSTRUCTIONS

FINAL INSTALLATION CHECK

INSTALLATION INSTRUCTIONS

Once you have completed the installation of the dryer and it is in its ﬁ nal location, conﬁ rm proper operation with the following steps and tests.

Is gas turned on? (Gas models only)

Is dryer plugged in? Dryer should always be

plugged into the proper outlet.

Gas dryer should use a 120-VAC, 60-Hz. grounded 3-prong outlet.

Electric dryer should use a 4-wire connection which is required for all mobile and manufactured home installations, as well as all new construction after January 1, 1996.

-- OR --

A 3-wire connection. NOTE: A 3-wire connection is NOT permitted on new construction after January 1, 1996.

Testing Dryer Heating

Close the dryer door.

Press the POWER button to turn the dryer on.

Turn the cycle selector knob to Normal drying cycle.

Press the START/PAUSE to start the dryer. Open the dryer door and check that the air inside is warm after three minutes.

NOTE: If all air is not purged from the gas line, the gas igniter may turn oﬀ before the main burner ignites. If this happens, the igniter will reattempt gas ignition until all the air is purged from the gas line.

Checking Venting

The vent duct should be checked for lint buildup and cleaned at least once per year. If any noticeable reduction in drying performance occurs, check the duct for obstructions and blockages.

Is the dryer transition duct connected? Make sure

the transition duct behind the dryer is properly connected and is not crushed or damaged.

Is dryer level? Once the dryer is in its ﬁ nal location, recheck the dryer to be sure it is level. Make sure it is level front to back and side to side, and that all four leveling feet rest ﬁ rmly on the ﬂ oor.

Is the dryer heating normally? Perform the following dryer heating test.

Page 18

HOW TO USE

To reduce the risk of ﬁ re, electric shock, or injury to persons, read this entire

WARNING:

manual, including the Important Safety Instructions, before operating this dryer.

CONTROL PANEL FEATURES

G H

POWER (ON/OFF) BUTTON

Press to turn the dryer ON. Press again to turn the dryer OFF. Pressing the POWER button during a cycle will cancel that cycle and any settings will be lost.

CYCLE SELECTOR KNOB

The cycle selector knob is used to select the desired dry cycle by rotating the knob in either direction until the desired cycle LED is illuminated. Once the desired cycle has been selected, the standard presets for that cycle will show in the display. These settings can be adjusted using the cycle modiﬁ er or option buttons any time before starting the cycle.

START/PAUSE BUTTON

Press this button to start the selected cycle. The dryer will display the estimated time (AUTO DRY) or set time (TIMED DRY) remaining and start tumbling. To pause the cycle at any time, open the dryer door or press START/PAUSE. To resume the cycle where it was stopped, press START/PAUSE again.

NOTE: If the dryer has been stopped for more than four minutes, the dryer will turn oﬀ automatically and all settings will be lost.

OPTION BUTTONS

These buttons allow you to select cycle options. Some of the option buttons have secondary functions. The controls can be locked or unlocked by pressing and holding the CONTROL LOCK button for ﬁ ve seconds.

CYCLE MODIFIER BUTTONS

Use these buttons to adjust the settings for the selected cycle. The settings light up above the buttons to show the current selection. The default temperature setting cannot be changed in AUTO DRY cycles. AUTO DRY cycles are modiﬁ ed using the Dry Level button.

TIME AND STATUS DISPLAY

The display shows the estimated time remaining for auto cycles and actual time for timed cycles. The status of the cycle is also displayed. The CHECK VENT indicator will illuminate if there is a serious restriction in the exhaust system.

MY CYCLE

If you have a special combination of settings that are used frequently, you can save these settings as a MY CYCLE.

CHECK VENT INDICATOR (DUCT BLOCKAGE SENSING SYSTEM)

The CHECK VENT duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust ﬂ ow from the dryer. This light does not indicate any problems with your dryer. If this light blinks, it indicates that your home’s exhaust system has a serious restriction, which is not covered by your dryer’s warranty. There are services available for cleaning/maintaining the external venting. Sears provides this service via Sears Carpet, Upholstery, and Duct Cleaning. Call 1-800-661-6594 to schedule duct cleaning service from Sears (if it is available in your area).

NOTE: To protect your fabrics, not all settings are allowed in all cycles.

Page 19

OPERATING THE DRYER

HOW TO USE

LOAD THE DRYER

Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care.

CLEAN THE LINT FILTER

If the lint ﬁ lter has not already been cleaned, lift out the ﬁ lter and remove the lint from the last load. This will help ensure the fastest and most eﬃ cient drying performance.

TURN ON THE DRYER

Press the POWER button to turn ON the dryer. The cycle LEDs will illuminate and a chime will sound.

SELECT A CYCLE

Turn the cycle selector knob in either direction until the LED for the desired cycle is illuminated. The preset temperature, dry level, and option settings for that cycle will display.

SELECT CYCLE MODIFIERS

Default settings for the selected cycle can now be changed, if desired, using the Temp and Dry Level buttons.

NOTE: Not all options or modiﬁ ers are available on all cycles. Temperature can only be adjusted on Timed Dry cycles; Dry Level is only available on Auto Dry cycles. A diﬀ erent chime will sound and the LED will not illuminate if the selection is not allowed.

SELECT CYCLE OPTIONS

Cycle options can be added using the option buttons. NOTE: Not all options or modiﬁ ers are available on all cycles.

A diﬀ erent chime will sound and the LED will not come on if the selection is not allowed.

BEGIN CYCLE

Press the START/PAUSE button to begin the cycle. The cycle can be paused at any time by opening the door or by pressing the START/PAUSE button. If the cycle is not restarted within four minutes of being paused, the dryer will shut oﬀ and the settings will be lost.

END OF CYCLE

When the cycle is ﬁ nished, the chime will sound. Immediately remove your clothing from the dryer to reduce wrinkling. If WRINKLE GUARD is selected, the dryer will tumble brieﬂ y every few minutes to help prevent wrinkles from setting in the clothes.

Page 20

HOW TO USE

CYCLE GUIDE

The cycle guide below shows the available options and recommended fabric types for AUTO DRY cycles. *NOTE: The default time and actual time will vary depending on the size of the load and moisture content.

Auto Dry Cycles

AUTO DRY cycles utilize a sensor that detects moisture levels in the clothes and adjusts the drying time as needed to ensure superior results. The dryer automatically sets the dry level and temperature at the recommended setting for each cycle. The estimated time remaining will be shown in the display.

= available option

= default setting

Modiﬁ ers Options

Type Cycle Fabric Type Temperature Dry Level

Normal Work clothes, etc.

Bulky/Bedding

Casual

Comforter, pillows,

shirts

Permanent press,

synthetic items

Medium Normal 41

Adjustable

Medium Normal 55

Adjustable

Low Normal 36

Time in

Min.

Time/

Less

Time

Wrinkle

Guard

Damp

Dry

Signal

Static Shield

Heavy Duty

AUTO DRY

Steam Refresh

Workout Wear

Small Load

Delicates

Towels

Sanitize

Jeans, heavyweight

Comforter, bedding,

trousers, etc. Do not

†

cotton/towel fabric

items

Towels, heavy

cottons, denims

children’s clothing,

etc.

1-5 garments.

Comforters, shirts,

use this cycle for

delicate fabrics.

Workout wear

Only normal &

type

(Max 3 lb)

Lingerie, sheets,

blouses

Extra High Normal 54

Adjustable

High Normal 55

Adjustable

Extra High Extra Dry 70

High Oﬀ 20

Adjustable Adjustable

Auto Auto 27

Extra High Normal 30

Adjustable

Low Normal 32

Adjustable

NOTE: To protect your garments, not every dry level, or option is available with every cycle. Temperature settings cannot be changed. A diﬀ erent chime will sound and the LED will not illuminate or the selection will not change if the selection is not allowed.

CERTIFIED BY NSF

NSF International (formerly the National Sanitation Foundation), certiﬁ es that the SANITIZE cycle reduces 99.9% of bacteria on laundry, and none of the bacteria will carry over onto the next laundry load.

• The default settings for the SANITIZE cycle are HIGH temperature and EXTRA DRY. These default settings cannot be changed.

• Do NOT use this cycle with delicate items or fabrics.

† The Workout Wear cycle is designed to help maintain the performance and extend the life of garments created

with special high-performance properties. The temperature and dry level are set automatically and are not adjustable.

Page 21

HOW TO USE

CYCLE GUIDE

The cycle guide below shows the available options and recommended fabric types for TIMED DRY cycles.

Timed Dry Cycles

Use Timed Dry cycles to select a speciﬁ c amount of drying time and the drying temperature. When a TIMED DRY cycle is selected, the display shows the actual time remaining in your cycle.

You can change the actual time for the cycle by pressing MORE TIME or LESS TIME. Press and hold the MORE TIME or LESS TIME buttons to rapidly change the time.

= available option

= default setting

Modiﬁ ers Options

Type Cycle Fabric Type Temperature Dry Level

Express Dry

Touch Up

Air Dry

For small loads with

short drying times

For removing light wrinkles

For items that require heat-free drying such

as plastics or rubber

Extra High Oﬀ 25 Adjustable Max. 99

High Oﬀ 20

Adjustable Max. 99

Air Only Oﬀ 30

Time in

Min.

Max. 99

Time/

Less

Time

Wrinkle

Guard

Damp

Dry

Signal

Static Shield

TIMED DRY

Rack Dry

Wool sweaters, silk,

lingerie

For loads that require

a speciﬁ c dry time.

Oﬀ Oﬀ 50

Air only, low Max 99

High Oﬀ 20/30/40

SANITIZE CYCLE

The SANITIZE cycle is designed to reduce certain bacteria in your clothing. When this cycle is selected, the temperature is set to HIGH and the dry level is set to EXTRA DRY. These default settings cannot be changed.

NOTE: Do NOT use this cycle with delicate items or fabrics.

Page 22

HOW TO USE

To reduce the risk of ﬁ re, electric shock, or injury to persons, read this entire manual,

WARNING:

including the Important Safety Instructions, before operating this dryer.

SORTING LOADS

Fabric Care Labels

Most articles of clothing feature fabric care labels that include instructions for proper care.

Tumble dry

Dry

Gentle/ delicate

Normal

Do not tumble dry

Permanent Press/ wrinkle resistant

Do not dry (used with do not wash)

Heat setting

High

Medium Low

No heat/air

Group Similar Items

For best results, sort clothes into loads that can be dried with the same drying cycle.

Diﬀ erent fabrics have diﬀ erent care requirements, and some fabrics will dry more quickly than others. For best fabric care results, always dry fabrics with similar care requirements together.

LOADING THE DRYER

WARNING:

To reduce the risk of ﬁ re, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

• Check all pockets to make sure that they are empty. Items such as clips, pens, coins, and keys can damage both your dryer and your clothes. Flammable objects such as lighters or matches could ignite, causing a ﬁ re. Failure to do so can result in ﬁ re, explosion, or death.

• Never dry clothes that have been exposed to oil, gasoline, or other ﬂ ammable substances. Washing clothes will not completely remove oil residues. Failure to obey this warning can result in ﬁ re, explosion, or death.

Loading Tips

• Combine large and small items in the same load.

• Damp clothes will expand as they dry. Do not overload the dryer; clothes require room to tumble and dry properly.

• Close zippers, hooks, and drawstrings to prevent these items from snagging or tangling on other clothes.

CHECK THE LINT FILTER BEFORE EVERY LOAD

Every time the dryer is turned on, the CHECK FILTER light will blink as a reminder to make sure the ﬁ lter is clean. Always make sure the lint ﬁ lter is clean before starting a new load; a clogged lint ﬁ lter will increase drying times. To clean, pull the lint ﬁ lter straight up and roll any lint oﬀ the ﬁ lter with your ﬁ ngers. Do not rinse or wash the ﬁ lter to remove lint. Push the lint ﬁ lter ﬁ rmly back into place.

Always ensure the lint ﬁ lter is properly installed before running the dryer. Running the dryer with a loose or missing lint ﬁ lter may damage the dryer and articles in the dryer.

Lint Filter

Page 23

TIME AND STATUS DISPLAY

The Time and Status Display shows the cycle time, cycle progress, and vent status. When the dryer is turned on, the display will illuminate.

HOW TO USE

TIME DISPLAY

When a cycle is selected, the display will indicate the default time for that cycle including selected options or adjustments. In AUTO DRY cycles, the time remaining will be estimated and may change during the cycle, depending on the condition of the load. In TIMED DRY, the time displayed will be the actual time remaining.

CHECK FILTER LIGHT

The CHECK FILTER light will blink before each load, as a reminder to check the lint ﬁ lter. Always clean the lint ﬁ lter before every cycle.

CYCLE STATUS INDICATORS

This portion of the display shows which stage of the drying cycle is currently under way (DRYING or COOLING).

Page 24

HOW TO USE

CYCLE MODIFIER BUTTONS

Each cycle has default settings that are selected automatically. You may also customize these settings using the cycle modiﬁ er buttons.

AUTO DRY cycles are designed to properly care for speciﬁ c fabrics and loads. As a result, not all settings are available for each cycle selection.

TIMED DRY cycles have default settings, but you may also customize the temperature setting and add options.

Settings are not limited in most timed dry cycles. Use care when setting options and modiﬁ ers for these cycles to prevent damage to your clothing.

NOTE: To protect your garments, not every dry level, temperature, or option is available with every cycle.

A B C

TEMP

Adjusts the temperature setting from AIR ONLY to EXTRA HIGH. This allows precise care of your fabrics and garments. Press the TEMP button repeatedly to scroll through available settings. Temperature settings are not adjustable in AUTO DRY cycles.

DRY LEVEL

Sets the level of dryness for the selected AUTO DRY cycle. Press the DRY LEVEL button repeatedly to scroll through available settings. Use this button to adjust the dryness of the articles in the load to your preference.

• This option is not available with TIMED DRY cycles.

• The dryer will automatically adjust the cycle time.

• Selecting EXTRA DRY will increase the cycle time and dry level, while DAMP DRY will decrease the cycle time and dry level.

• Use the DAMP DRY setting for items that you wish to iron or hang for ﬁ nal drying.

TIMED DRY

Allows you to manually select 20, 30 or 40 minutes of dry time. Use the MORE TIME/LESS TIME buttons to increase or decrease the selected drying time in 1-minute increments. Press and hold the MORE TIME or LESS TIME buttons to rapidly change the time.

CHECK VENT

ADD WATER

If the steam feeder runs low on water, the ADD WATER light will blink and the cycle will cancel. Reﬁ ll the steam feeder and then restart the cycle.

Page 25

HOW TO USE

CYCLE OPTIONS AND SPECIAL FEATURES

Your dryer features several additional cycle options and special features to meet your individual needs.

MORE TIME

Use the MORE TIME/LESS TIME buttons to increase or decrease the selected

drying time in 1-minute increments. Press and hold the MORE TIME or LESS TIME buttons to rapidly change the time.

LESS TIME

Use the MORE TIME/LESS TIME buttons to increase or decrease the selected

drying time in 1-minute increments. Press and hold the MORE TIME or LESS TIME buttons to rapidly change the time.

DAMP DRY SIGNAL

If you press the DAMP DRY SIGNAL

button, the dryer will emit a chime when

the clothes are just short of completely dry, in case you want to remove them for ironing or hang drying.

DRUM LIGHT

Use the DRUM LIGHT button to turn on

the light inside the drum during

cycle operation. NOTE: The drum light will also come on if the dryer

door is opened; however, after the dryer has been oﬀ for more than four minutes, the drum light will be disabled until the POWER button is pressed to turn on

the dryer.

MY CYCLE

MY CYCLE allows you to store a

customized dry cycle for future use. It

allows you to save favorite temperature, dry level, and other options for a cycle, and then recall them at the touch of a button.

NOTE: You can only save the customized settings for one cycle at a time. Pressing and holding the MY CYCLE button will overwrite any previously saved cycle.

To save a MY CYCLE:

Press the POWER button to turn on the dryer.

Turn the cycle selector knob to select the desired cycle.

Press the desired cycle modiﬁ er button to change the

setting.

To recall a MY CYCLE:

Press the POWER button to turn on the dryer.

Press the MY CYCLE button. The stored settings will

display.

Press the START/PAUSE button to start the cycle.

NOTE: MY CYCLE can be adjusted the same as any

other cycle. However, once any other button is pressed, the LED will turn oﬀ , indicating that the settings are no longer those of your saved cycle.

WRINKLE GUARD

Selecting this option will tumble the clothes after the cycle ends for a few

seconds every few minutes without heat. This option is active for 150 minutes after the end of the cycle, or until the door is opened. This helps prevent wrinkles if the clothes are not removed immediately after the cycle has ﬁ nished.

AIR DRY

Use the AIR DRY cycle for items that

require heat-free drying such as plastics

or rubber.

CHIME

The CHIME button adjusts the volume of

the chime or turns it oﬀ . Press the

button repeatedly until the desired sound level is reached.

CONTROL LOCK

Use this option to disable the controls.

All controls will be disabled except for

the POWER button. Once set, the CONTROL LOCK must be turned oﬀ before the controls can be used. After the dryer has shut oﬀ , the POWER button will allow the dryer to be turned on, but the controls will remain locked. When the CONTROL LOCK is set, the LED will illuminate and “CL” will display alternately with the cycle time.

Press and hold the CONTROL LOCK button for ﬁ ve seconds to activate or deactivate the CONTROL LOCK.

Press a cycle option button to add the desired options.

Press and hold the MY CYCLE button.

Page 26

HOW TO USE

STEAM FEATURES

WARNING:

• Do not open the dryer door during Steam Cycles. Steam can cause severe burns.

• Do not ﬁ ll the steam feeder with gasoline, dry cleaning solvents, or other ﬂ ammable or explosive substances. They give oﬀ vapors that could explode.

• Do not drink water from the steam feeder.

• Do not ﬁ ll the steam feeder with hot water (over 86°F/30°C).

• Do not touch the steam nozzle in the drum during or after the steam cycle.

Using the STEAM REFRESH cycle

The STEAM REFRESH cycle uses the power of steam to quickly reduce wrinkles and odor in fabrics. It brings new life to wrinkled clothes that have been stored for an extended period of time, and it can make heavily wrinkled clothes easier to iron. STEAM REFRESH can also be used to help reduce odors in clothes, such as clothes that were worn in a room where people had been smoking. This cycle can refresh from one to ﬁ ve garments, or one bulky item such as a comforter. Use

for one to three garments and 5 for four or ﬁ ve

garments. For these settings, the dryer tumbles without heat while the water in the steam generator is heated. Once steam begins to ﬂ ow, the dryer will only tumble for about three seconds every minute. Best results are achieved with 70/30 cotton/polyblend fabrics.

The such as comforters. For this setting, the cycle begins with a heated dry segment followed by a shorter steam segment, as above.

NOTE: The STATIC SHIELD option can be used together with the STEAM REFRESH cycle to help prevent static electricity after the cycle.

(big) setting should be used for bulky items,

Turn the dryer ON and select the STEAM REFRESH cycle.

Select the STATIC SHIELD option, if desired.

The default number of garments is three. Press the MORE TIME or LESS TIME button to adjust the load size, as described above.

Press the START/PAUSE button to start the cycle.

IMPORTANT NOTES ABOUT STEAM FUNCTIONS:

• Steam may not be clearly visible during the steam functions. This is normal.

• Do not use Steam Refresh with items such as wool, wool blankets, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets.

• For best results, load articles of similar size and fabric type. Do not overload.

• If the home’s exhaust system is restricted, the performance of the steam functions will be reduced.

• During steam operation, the clothes will tumble for only a few seconds, once a minute.

• The steam feeder must be ﬁ lled with water up to the MAX line. Otherwise, the ADD WATER light

may illuminate.

STATIC SHIELD

This option uses steam late in the drying cycle to reduce the static electricity caused by dry fabrics rubbing together. Change the steam time by pressing the MORE TIME and LESS TIME buttons to display the approximate number of articles in the load: 7, 9, 11, 14, 16 or 18. Steam time is approximately 1-6 minutes, depending on the number of garments selected.

NOTE: When STATIC SHIELD is added to auto dry cycles, the LESS and DAMP dry levels cannot be selected.

EASY IRON

The EASY IRON option provides uniform, properly dampened fabrics for ironing, which can save time and make ironing easier. Change the steam time by pressing the MORE TIME or LESS TIME button, depending on the number of garments in the load: 1, 2, 3, 4, or 5. Steam time is approximately 4-9 minutes, depending on the number of garments selected.

NOTE: When using the STATIC SHIELD or EASY IRON options with timed dry cycles, always adjust the dry time before selecting the option. Once the option is selected, the MORE TIME and LESS TIME buttons adjust the number of garments, rather than the cycle time. These buttons are disabled once the cycle is started.

If the STATIC SHIELD or EASY IRON option is selected with the STEAM REFRESH cycle, the MORE TIME and LESS TIME buttons will function as described for the options, rather than the STEAM REFRESH cycle.

Page 27

STEAM FEATURES (continued)

Filling the Steam Feeder:

HOW TO USE

Feeder

Lever

Pull out the drawer.

Lid

Steam

Feeder

Fill the steam feeder with ordinary tap water to the

Water ONLY

MAX line or until the water touches the ﬁ lter screen.

Lift out the steam feeder.

Place the steam feeder in the drawer; then push in the drawer until it clicks into place.

IMPORTANT NOTES ABOUT STEAM CYCLES

Before using a steam cycle, the steam feeder must be ﬁ lled with water up to the MAX line; make sure that the drawer is completely closed. If the steam feeder runs out of water, the ADD WATER light will blink. If the light blinks, turn the dryer oﬀ , reﬁ ll the feeder, and then restart the steam cycle.

When steam is used for the ﬁ rst time, it is possible that the steam feeder may not have enough water and the ADD WATER light will illuminate. Reﬁ ll the feeder and restart the cycle.

• Only use water. Do not ﬁ ll the steam feeder with other liquids, rinse agents, or detergents.

• Before moving the dryer, make sure that the steam feeder is empty.

• Do not use distilled water; the water level sensor in the steam generator will not work.

• Be careful not to spill water when ﬁ lling and replacing the steam feeder.

• Wipe up any spilled water around the steam feeder and drawer before starting the dryer.

• During steam operation, the clothes will tumble for only a few seconds, once a minute.

WARNING:

• Do not ﬁ ll the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances. They give oﬀ vapors that could explode.

• Do not ﬁ ll the steam feeder with hot water (over 86°F/30°C).

• Do not drink water from the steam feeder.

Page 28

USER MAINTENANCE INSTRUCTIONS

To reduce the risk of ﬁ re, electric shock, or injury to persons, read this entire manual,

WARNING:

including the Important Safety Instructions, before operating this dryer.

• Unplug the dryer or turn the power oﬀ before cleaning to avoid the risk of electric shock. Failure to follow this

warning can cause serious injury, ﬁ re, electrical shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the dryer. They will damage the ﬁ nish.

REGULAR CLEANING

Cleaning the Exterior

Proper care of your dryer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent. Immediately wipe oﬀ any spills with a soft, damp cloth.

IMPORTANT: Do not use cleaning alcohols, solvents, or similar products.

NEVER use steel wool or abrasive cleansers because they can damage the surface.

Cleaning the Interior

Wipe around the door opening and seal with a soft, damp cloth to prevent lint and dust buildup that could damage the door seal.

Clean the window with a soft cloth dampened with warm water and a mild, nonabrasive household detergent, then wipe dry.

NEVER use steel wool or abrasive cleansers; they can scratch or damage the surface.

Cleaning Around and Under the Dryer

Vacuum lint and dust from around the dryer and underneath it regularly.

ALWAYS make sure the lint ﬁ lter is clean before every cycle. The CHECK FILTER light on the control panel will blink before every cycle to remind you.

NOTE: NEVER operate the dryer without the lint ﬁ lter.

To remove lint between cycles:

Open the dryer door.

Pull the lint ﬁ lter straight up.

Roll any lint oﬀ the ﬁ lter with your ﬁ ngers.

Periodic thorough cleaning:

Some fabric softeners can build up on the lint ﬁ lter over time. This buildup can restrict the airﬂ ow through the ﬁ lter reducing dryer eﬃ ciency and lengthening drying times. After removing lint, if the ﬁ lter looks dark or dirty when held up to the light, follow these steps to clean:

Cleaning the Lint Filter

Lint Filter

Use hot soapy water and a stiﬀ brush to clean the ﬁ lter.

Make sure the ﬁ lter is completely dry before reinstalling it and using the dryer.

NOTE: NEVER operate the dryer with a wet lint ﬁ lter.

Maintaining Ductwork

Vent ductwork should be checked for lint build up once per month and cleaned at least once per year. If any noticeable reduction in airﬂ ow or drying performance occurs, immedi- ately check the ductwork for obstruction and blockages. Contact a qualiﬁ ed technician or service provider.

Page 29

USER MAINTENANCE INSTRUCTIONS

MAINTAINING THE EXHAUST SYSTEM

The most common cause of dryer problems is poor exhaust venting. Poor exhaust venting may result from the

following conditions:

• DIRTY OR DAMAGED EXHAUST DUCTS

• WRONG VENT MATERIAL

• RESTRICTED OR DAMAGED VENT HOOD

• EXCESSIVELY LONG VENT

• THE USE OF PLASTIC OR FOIL VENTING

Maintaining the Exhaust System

Vent ducts should be checked for lint buildup and cleaned at least once per year. If any noticeable reduction in drying performance occurs, check the ducts for obstructions and blockages.

If the CHECK VENT indicator illuminates, the exhaust system should be checked immediately for damage or obstructions. The CHECK VENT indicator signals a serious reduction in exhaust airﬂ ow which will greatly reduce energy eﬃ ciency and increase drying times. Damaged or restricted exhaust systems are not covered by the dryer warranty. Damage to the dryer that is caused by damaged, restricted, or otherwise inadequate exhaust systems is not covered by the dryer warranty.

CHECK VENT Indicator

The CHECK VENT warning system is designed to help you avoid the reduced performance caused by restrictions in the household exhaust system. The CHECK VENT indicator illuminates to alert you when problems in the system occur, so you can have them repaired.

While you should always check and maintain your exhaust system regularly, the CHECK VENT warning system will detect and alert you if serious problems develop in your home’s exhaust system. This includes exhaust systems that are unsatisfactory for any reason including a blockage in the venting, crushed/kinked venting, or venting which exceeds the maximum recommended length requirement as described in the installation section.

NOTE: The total length includes the length from the back of the dryer to the outside vent hood, PLUS a factor for every 90° elbow in the exhaust system. For example, if the distance from the back of the dryer to the vent hood is 30 feet, and there are four elbows in the system, then it exceeds the 28 foot maximum length allowed for those conditions.

The CHECK VENT indicator on the control panel will alert you that the exhaust system is not moving enough air from the dryer to the outside. This lack of airﬂ ow will lead to long dry times, poor drying and possibly dryer failure.

CHECK VENT Operation

The CHECK VENT system uses components already in the dryer. By monitoring these components over the course of several cycles, the control is able to determine how much restriction there is in the exhaust system. If it detects a high level of restriction, it will turn on the CHECK VENT light to alert you to the condition. The dryer will continue to operate after the light comes on, but you should have the exhaust system cleaned or repaired immediately to avoid longer dry times and higher energy consumption.

IMPORTANT: In order for a dryer to properly and eﬃ ciently dry your clothes, it is extremely important that the exhaust system is as short and clean as possible. It MUST be less than the maximum installation requirements as outlined in the installation section. It is also very important that you make sure that when the dryer is installed, the exhaust system is clean and clear of any restrictions and is not kinked or crushed.

Failure to meet these guidelines will result in long dry times, increased energy consumption and possibly even clothing damage or dryer failure. When exhaust system restrictions become extreme, the CHECK VENT light will blink to alert you to the condition so you can have the exhaust system cleaned or repaired.

To prevent false alarms and for increased reliability, the dryer will monitor the exhaust condition for several loads. If multiple, consecutive cycles exceed the restriction limits, the control will blink the CHECK VENT indicator.

A blinking CHECK VENT indicator means the external

venting should be checked for potential restrictions as soon as possible.

The CHECK VENT indicator will remain active (blinking) until the restriction is resolved AND the control has veriﬁ ed the improved airﬂ ow for several cycles.

After the exhaust is cleaned or repaired, it will take

several cycles for the CHECK VENT indicator to reset and turn oﬀ the light.

As a reminder, external dryer venting is considered part of your home and is not covered by the product warranty or protection agreements. There are services available for cleaning/maintaining the external venting. Sears provides this service via Sears Carpet, Upholstery, and Duct Cleaning. Call 1-800-661-6594 to schedule duct cleaning service from Sears (if it is available in your area).

NOTE: The CHECK VENT indicator is designed to measure performance over several consecutive cycles before activating or deactivating, to avoid false alarms. A very large load, such as a large comforter, could cause the CHECK VENT system to sense that the exhaust system is restricted, but this would not cause the light to blink. However, if several large loads were to run back to back, the CHECK VENT indicator could be activated.

Page 30

Kenmore Connect™ System

Should you experience any problems with your dryer, it has the capability of transmitting data via your telephone to the Kenmore Connect Team. This gives you the capability of speaking directly to our specially trained technicians. The technician records the data transmitted from your machine and uses it to analyze the issue, providing a fast and eﬀ ective diagnosis.

Using the Kenmore Connect™ System

Follow the technician’s instructions and perform the following steps when requested.

If you experience problems with your dryer, call 1-800-4-MY-HOME®. Only use the Kenmore Connect System feature when instructed to do so by the Kenmore Connect Team. The transmission sounds that you will hear are normal and sound similar to a fax machine.

Kenmore Connect cannot be activated unless your dryer is turned on by pressing the POWER button. If your dryer is unable to turn on, then troubleshooting must be done without using Kenmore Connect.

HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by

the call center, no more than one inch from (but not touching) the machine. NOTE: Do not press any other buttons or turn the cycle selector knob.

PUSH and hold the TEMP button while continuing to hold your phone to the

POWER button.

LISTEN for three beeps. After you hear the three beeps, release the TEMP button. Keep the

phone in place until the tone transmission has ﬁ nished. This takes about 6 seconds, and the display will count down the time. Once the countdown is over and the tones have stopped, resume your conversation with the technician, who will then be able to assist you in using the information transmitted for analysis.

NOTE:

• For best results, do not move the phone while the tones are being transmitted.

• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.

• Pressing the POWER button during the transmission will shut oﬀ Kenmore Connect.

Page 31

BEFORE CALLING FOR SERVICE

Problem Possible Cause Solutions

*CHECK VENT indicator is blinking

TROUBLESHOOTING GUIDE

Exhaust system is too long or has too many turns/restrictions.

Install a shorter or straighter duct run. See the Installation Instructions for details.

* This warning light is not a dryer failure and is not covered by the dryer warranty. Contact a duct cleaning service to set up an appointment to have your exhaust system cleaned and inspected.

The CHECK VENT indicator remains active (blinking) after clearing the restriction in the venting.

Dryer will not turn on Power cord is not properly plugged

Buttons are disabled or CL shows in display

Light does not turn on when door is opened

Dryer does not heat House fuse is blown, circuit breaker

Partial blockage of the ductwork due to lint buildup or other foreign object.

The appliance has detected a restriction in the external dryer venting.

After clearing the restriction, the CHECK VENT system requires multiple, consecutive cycles to determine that the performance value has improved before the CHECK VENT indicator is reset.

in.

House fuse is blown, circuit breaker has tripped, or power outage has occurred.

CONTROL LOCK function is engaged.

Dryer has been oﬀ for more than four minutes and light is disabled.

has tripped, or power outage has occurred.

Ductwork should be checked/cleaned immediately. Dryer can be used in this condition, but drying times will be longer and energy consumption will increase.

See the CHECK VENT INDICATOR and CHECK VENT OPERATION sections for details regarding this function.

If the CHECK VENT indicator remains active for more than ﬁ ve cycles after the restriction has been cleared, call for service.

Make sure that the plug is securely plugged into a grounded outlet matching the dryer’s rating plate.

Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualiﬁ ed electrician.

Press and hold the CONTROL LOCK button for ﬁ ve seconds to activate or deactivate the function.

Press the POWER button to turn on the dryer, which will enable the drum light.

Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualiﬁ ed electrician.

Greasy or dirty spots on clothes

Drying time is not consistent

Gas supply or service is turned oﬀ (gas models only).

Clean and dirty clothes are being dried together.

Clothes were not properly cleaned or rinsed before being placed in the dryer.

Heat settings, load size, or dampness of clothing is not consistent.

NOTE: Due to the design of electric dryers, it is possible for a circuit problem to allow an electric dryer to run without heat.

Conﬁ rm that the house gas shutoﬀ and the dryer gas shutoﬀ valves are both fully open. Even if gas is not supplied to the dryer, it will run and no error codes will display. Verify that other gas appliances in the home are working normally.

Only use your dryer to dry clean items. Soil from dirty clothes can transfer to the clean clothes in the same or later loads.

Stains on dried clothes could be stains that weren’t removed during the washing process. Make sure that clothes are being completely cleaned or rinsed according to the instructions for your washer and detergent. Some diﬃ cult soils may require pre- treating prior to washing.

The drying time for a load will vary depending on the type of heat used (electric, natural gas, or LP gas), the size of the load, the type of fabrics, the wetness of the clothes, and the condition of the exhaust duct and lint ﬁ lter. Even an unbalanced load in the washer can cause poor spinning, resulting in wetter clothes which will take longer to dry.

Page 32

TROUBLESHOOTING GUIDE

BEFORE CALLING FOR SERVICE (continued)

Problem Possible Cause Solutions

Clothes take too long to dry Exhaust ducts are blocked, dirty, or

duct run is too long.

Conﬁ rm that the exhaust duct is properly conﬁ gured and free of debris, lint, and obstructions. Make sure that outside wall dampers can open properly and are not blocked, jammed, or damaged.

Load is not properly sorted.

Large load of heavy fabrics.

Dryer controls are not set properly.

Lint ﬁ lter needs to be cleaned.

House fuse is blown, circuit breaker has tripped, or power outage has occurred.

Separate heavy items from lightweight items. Larger and heavier items take longer to dry. Light items in a load with heavy items can fool the sensor because the light items dry faster.

Heavy fabrics take longer to dry because they tend to retain more moisture. To help reduce and maintain more consistent drying times for large and heavy fabrics, separate these items into smaller loads of a consistent size.

Use the appropriate control settings for the type of load you are drying. Some loads may require an adjustment of the DRY LEVEL setting for proper drying.

Remove the lint from the ﬁ lter before every load. With the lint removed, hold the ﬁ lter up to a light to see if it is dirty or clogged. If it looks dirty, follow the cleaning instructions on. With some loads that produce high amounts of lint, such as new bath towels, it may be necessary to pause the cycle and clean the ﬁ lter during the cycle.

Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualiﬁ ed electrician.

Dryer is overloaded.

Dryer is under loaded.

Clothes are wrinkled Clothes dried too long (over dried).

Clothes left in dryer too long after cycle ends.

Clothes are shrinking Garment care instructions are not

being followed.

NOTE: Due to the design of electric dryers, it is possible for a circuit problem to allow an electric dryer to run without heat.

Divide extra large loads into smaller loads for better drying performance and eﬃ ciency.

If you are drying a very small load, add a few extra items to ensure proper tumbling action. If the load is very small and you are using AUTO DRY cycles, the electronic control cannot properly sense the dryness of the load and may shut oﬀ too soon. Use TIMED DRY or add some extra wet clothes to the load.

Over drying a load of laundry can lead to wrinkled clothes. Try a shorter drying time or LESS DRY setting and remove items while they still retain a slight amount of moisture.

Use the WRINKLE GUARD option. This feature will tumble the clothes brieﬂ y every few minutes for up to 150 minutes to help prevent wrinkling.

To avoid shrinking your clothes, always consult and follow fabric care instructions. Some fabrics will naturally shrink when washed. Other fabrics can be washed but will shrink when dried in a dryer. Use a low or no heat setting.

Page 33

BEFORE CALLING FOR SERVICE (continued)

Problem Possible Cause Solutions

Error code: tE1 or tE2

Display shows error code: PS (electric dryers only)

Lint on clothes

Excess static in clothes after drying

Steam Features Not Working

Temperature sensor failure. Turn oﬀ the dryer and call for service.

Power cord is connected incorrectly.

Lint ﬁ lter not cleaned properly.

Laundry not sorted properly.

Excess static in clothes.

Dryer is overloaded. Tissue, paper, etc., left in

pockets. Fabric softener is not used or

used incorrectly.

Clothes dried too long (over dried).

Drying synthetics, permanent press, or synthetic blends.

Steam is not generated and no error code is displayed.

Garments are still wrinkled at the end of the STEAM REFRESH cycle.

Water drips down the door during steam cycles.

Drum does not turn during steam cycles.

Cannot see steam vapor at the beginning of the cycle.

Odors are not completely removed at the end of the STEAM REFRESH cycle.

White (N) and red (L2) wires on power cord. Check power cord connections for neutral connection on the center terminal. 240 volts applied to the control, so it will protect itself.

Remove the lint from the ﬁ lter before every load. With the lint removed, hold the ﬁ lter up to a light to see if it is dirty or clogged. If it looks dirty, follow the cleaning instructions. With some loads that produce high amounts of lint, it may be necessary to clean the ﬁ lter during the cycle.

Some fabrics are lint producers (i.e., a fuzzy white cotton towel) and should be dried separately from clothes that are lint trappers (i.e., a pair of black linen pants).

Use a fabric softener to reduce static electricity. Be sure to follow the manufacturer’s instructions. Over drying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use AUTO DRY cycles.

Divide extra large loads into smaller loads for drying. Check pockets thoroughly before washing and drying clothes.

Use a fabric softener or the STATIC SHIELD option, if equipped, to reduce static electricity. Be sure to follow the manufacturer’s instructions.

Over drying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use AUTO DRY cycles. Select a LESS DRY setting on AUTO DRY cycles, if necessary.

These fabrics are naturally more prone to static buildup. Try using fabric softener, or use LESS DRY and/or shorter TIMED DRY time settings.

Check for condensation on the inside of the door during steam the portion of the cycle. Steam is not directly visible. This is normal. Check steam feeder drawer:

1. Make sure steam feeder is ﬁ lled with water to the MAX line.

2. Make sure steam feeder is seated properly and drawer is fully closed.

3. Turn the dryer oﬀ , then turn back on and restart the steam cycle.

Do not use distilled water - The water level sensors in the steam generator will not work. Steam feeder pump not working - call for service.

Load only one to ﬁ ve garments (or a single bulky item). Do not mix fabric types. STEAM REFRESH is most eﬀ ective on 70/30 cotton/polyblends. Do not use on 100% cotton items.

Steam is invisible. However, under some conditions, the condensed fog may be seen, or condensation will form on the inside of the door glass and may be seen dripping down the glass.

The drum is turned oﬀ so that the steam vapor remains in the drum. The drum will turn for only a few seconds, once a minute.

Steam is released at diﬀ erent stages of the cycle for each option. Steam cannot be seen, but condensation may form on the inside of the door when steam is being generated.

Some odors are diﬃ cult to remove. Fabrics containing certain diﬃ cult odors or very strong odors may not refresh well and should be washed or dry cleaned instead.

TROUBLESHOOTING GUIDE

Page 34

WARRANTY

Kenmore Elite Limited Warranty

When installed, operated and maintained according to all supplied instructions, if this appliance fails due to a defect in material and workmanship within one year from the date of purchase, call 1-800-4-MYHOME® to arrange for free repair.

If this appliance is ever used for other than private family purposes, this warranty applies for only 90 days from the date of purchase.

This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to ﬁ lters, belts, incandescent light bulbs and bags.

2. A service technician to instruct the user in correct product installation, operation or maintenance.

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from unauthorized modiﬁ cations made to this product.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied warranties, including warranties of merchantability or ﬁ tness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of implied warranties of merchantability or ﬁ tness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States or Canada*. This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state. * In-home repair service is not available in all Canadian geographical areas, nor will this warranty cover user

or servicer travel and transportation expenses if this product is located in a remote area (as deﬁ ned by Sears Canada Inc.) where an authorized servicer is not available.

Sears Brands Management Corporation, Hoﬀ man Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada M5B 2C3

Page 35

Page 36

Get it fixed, at your home or ours!

Your Home

For troubleshooting, product manuals and expert advice:

www.managemylife.com

For repair – in your home – of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner’s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME

(1-800-469-4663)

Call anytime, day or night(U.S.A. and Canada)

www.sears.com www.sears.ca

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call anytime for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)

www.sears.com www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

(1-888-784-6427)

www.sears.com

Au Canada pour service en français:

1-800-LE-FOYER

(1-800-533-6937)

www.sears.ca

® Registered Trademark / TM Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries ® Marca Registrada /

Marque de commerce / MD Marque déposée de Sears Brands, LLC

Marca de Fábrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros países

Kenmore Elite 796.7162, Elite 796.6162 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual