Kenmore 110.4508, 4598, 4599, ELITE 110.4508 Series, ELITE 110.4598 Series Owner's Manual & Installation Instructions

#t

5t

Front-Loading Automatic Washer

(i) W Yi,_!!!ii_¸_ii_'''__!ii_,iii"V_'i;_i!!)!liiiiiii:i,L!ii_iiii(i!!!'_i'_iiiiiiiii_:;Ji!i!!:ii_iy!C:iiiIY!ii!!!!ii!,i__ii_i!i!_I_i!ii;;_:!!!!::iiiiI:iiiii0 !Yi!_!Yil!!!i!ii_,_i!ill_y:Uii(i)IilliiiO,Y!S

Lavadora autombtica de carga frontal

Laveuse automatique b chargement frontal

ii"_V'!,:,:i:i(i!!!_y_ii_bii_!!i!i_iii,_:iiiiiiiii,_iii:i!i!i_¸ i!"_Ljiii_i!iiii!lii_i!!ii!i_ii_,_!!!!!i_iil)_i!!ii_,L_iii!ii'¸_'_¸_i!i:!!_,tilliiiiii_l!!ii_ii_,iiiii_ii_%_C:'_iliiiiiiOy!S,,ii_i;;!':"iiyiS:il:i_:!!!_iiiiii,_i:i!!i!!,_iiiiiiOy!

Models/Modelos/Modeles 110.4508:_, 4598_, 4599_

= color number, nOmero de color, numero de couleur

iiii_

C

Sears Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. www.sears.com

46t97022t 73t Sears Canada inc., Toronto, Ontario, Canada M5B 2B www.sears.ca

TABLEOF CONTENTS

PROTECTION AGREEMENTS ....................................................... 2

In the U.S.A ................................................................................... 2

In Canada ..................................................................................... 3

WARRANTY ..................................................................................... 3

PEDESTAL OPTION WARRANTY ................................................. 3

WASHER SAFETY ........................................................................... 4

INSTALLATION REQUIREMENTS ................................................ 5

Tools and Parts ............................................................................ 5

Options ......................................................................................... 5

Location Requirements ................................................................ 6

Drain System ................................................................................ 7

Electrical Requirements ................................................................ 8

INSTALLATION INSTRUCTIONS .................................................. g

Remove Transport System ........................................................... 9

Connect the Inlet Hoses ............................................................... 9

Route the Drain Hose ................................................................ 10

Secure the Drain Hose .............................................................. 10

Level the Washer ....................................................................... 10

Complete Installation ................................................................. 10

FEATURES AND BENEFITS ....................................................... 11

WASHER USE .............................................................................. 12

Starting Your Washer ................................................................ 12

Using the Dispenser .................................................................. 13

Pausing or Restarting ................................................................ 14

Changing Cycles, Options and Modifiers ................................. 14

Status Lights .............................................................................. 14

Cycles ........................................................................................ 15

Normal Sounds .......................................................................... 16

Options ...................................................................................... 16

Modifiers .................................................................................... 17

Laundry Guide ........................................................................... 18

LAUNDRY TIPS ............................................................................ 18

Loading ...................................................................................... 19

WASHER CARE ........................................................................... 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ...................................................................... 19

Vacation, Storage, and Moving Care ........................................ 19

TROUBLESHOOTING .................................................................. 20

SERVICE NUMBERS ............................................... BACK COVER

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new
Kenmore ®product is designed and manufactured for years of
dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That's when
having a Master Protection Agreement can save you money and
aggravation.

Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of
your new product. Here's what's included in the Agreement:

v' Expert service by our 12,000 professional repair specialists
v' Unlimited service and no charge for parts and labor on all

covered repairs

v' "No-lemon" guarantee - replacement of your covered

product if four or more product failures occur within twelve
months

v' Product replacement ifyour covered product can't be fixed
v' Annual Preventive Maintenance Check at your request - no

extra charge

v' Fast help by phone - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair
scheduling

v' Power surge protection against electrical damage due to

power fluctuations

v' Rental reimbursement if repair of your covered product takes

longer than promised

Once you purchase the Agreement, a simple phone call is all that
it takes for you to schedule service. You can call anytime day or
night, or schedule a service appointment online.

Sears has over 12,000 professional repair specialists, who have
access to over 4.5 million quality parts and accessories. That's

the kind of professionalism you can count on to help prolong the

life of your new purchase for years to come. Purchase your
Master Protection Agreement today!

Some limitations and exclusions apply. For prices and
additional information, call 1-800-827-6655.

Sears Installation Service
For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the
U.S.A. call 1-800-4-MY-HOME ®.

Maintenance Agreements
Your purchase has added value because you can depend on

Sears HomeCentraP for service. With over 2,400 Service
Technicians and more than a million parts and accessories, we

have the tools, parts, knowledge and skills to back our pledge:
We Service What We Sell.

Your Kenmore ®product is designed, manufactured and tested to
provide years of dependable operation. But like all products, it
may require service from time to time. The Sears Maintenance
Agreement offers you an outstanding service program, affordably
priced.

The Sears Maintenance Agreement

• Is your way to buy tomorrow's service at today's price

• Eliminates repair bills resulting from normal wear and tear

• Provides phone support from a Sears technician on products
requiring in-home repair

• Even if you don't need repairs, provides an annual Preventive
Maintenance Check, at your request, to ensure that your
product is in proper running condition.

Some limitations apply. For more information about Sears
Canada Maintenance Agreements, call 1-800-361-6665.

KENMORE ELITE WASHER

WARRANTY

Limited Lifetime Warranty on Stainless Steel Drum

For the lifetime of the washer from the date of purchase, Sears
will replace the Stainless Steel wash drum due to defective
material or workmanship. After the first year, you will be charged

for labor.

Limited 10-Year Warranty on Plastic Tub*
For the second through tenth year from the date of purchase,

Sears will replace the plastic tub if it is defective in material or
workmanship. After the first year, you will be charged for labor.

Limited 5-Year Warranty on Gearcase Parts*
For the second through fifth year from the date of purchase,

Sears will replace any gearcase parts that are defective in
material or workmanship. After the first year, you will be charged

for labor.

Limited 2-Year Warranty on SENSOR SMART rM
Control Board

For two years from the date of purchase, Sears will replace the
SENSOR SMART rMcontrol board if it is defective in material or

workmanship. You will be charged for labor after the first year.

Full 1-Year Warranty on Mechanical and Electrical Parts

For one year from the date of purchase, when this washer is
installed and operated according to the instructions that come
with it, Sears will repair or replace any of its mechanical or
electrical parts if they are defective in material or workmanship.

Service must be provided by a Sears Service Department in the
United States or Canada or an authorized agent.

Warranty Restriction
If this washer is operated for any purpose other than private

family use, all warranty coverage is restricted to 90 days from the
date of purchase.

Warranty Service
Warranty service is available by contacting the nearest Sears Service

Center in the United States or Canada. This warranty applies only
while the product is in use inthe United States or Canada.

This warranty gives you specific legal rights and you may also have
other rights which vary from state to state or province to province.

For Sears warranty information or to contact a Sears Service
Center, please reference the service numbers located on the
back page of this manual.

Sears, Roebuck and Co.

D/817WA, Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2B8

*In Canada a different warranty may apply.

Product Record

In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the

model and serial number label.
Have this information available to help you quickly obtain

assistance or service when you contact Sears concerning your
appliance.

Model number 110

Serial number
Purchase date

Save these instructions and your sales receipt for future
reference.

PEDESTALOPTION

WARRANTY

Full One-Year Warranty on Mechanical Parts
For one year from the date of purchase, supplier will repair or

replace any of its mechanical parts if defective in material or
workmanship. This Pedestal must be installed with this washer
according to the instructions provided in the Pedestal Installation

Instructions.

Warranty Restriction
If the pedestal is subject to other than private family use and or if

the pedestal is used with any other product than those listed in
the installation instructions, the above warranty coverage is null

and void.

Product Record

In the space below, record your complete model number, serial
number, and purchase date. You can find this information on the

model and serial number label.
Have this information available to help you quickly obtain

assistance or service when you contact Sears concerning your
pedestal.

Model number 110.

Serial number
Purchase date

Save these instructions and your sales receipt for future

reference.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

m Read all instructions before using the washer.
m Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or

explode.

mDo not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or
explode.

mUnder certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water system has not been used for such a
period, before using the washing machine, turn on all hot

water faucets and let the water flow from each for sever-
al minutes. This will release any accumulated hydrogen

gas. As the gas is flammable, do not smoke or use an
open flame during this time.

,,,Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used
near children.

_,Before the washer is removed from service or discarded,

remove the door or lid.

_,Do not reach into the washer if the drum, tub or agitator is

moving.

_,Do not install or store the washer where itwill be exposed to

the weather.

_,Do not tamper with controls.
_,Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and

have the skills to carry out.

_,See "Electrical Requirements" for grounding instructions.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Gather the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 19/16"[39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrench 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape

Parts supplied

Pedestal

You have the option of purchasing a pedestal for this washer. This
will add to the total height of your washer.

Beadedstrap Transport bolt hole plug (4)

Alternate Parts

Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call

1-800-4-MY-HOME ®(1-800-469-4663}.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm)

tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose Part
Number 8318155; and connector kit,

Part Number 285835

Drain hose too 4 ft drain hose extension kit, Part
short Number 285863

Water faucets 2 longer water fill hoses:
beyond reach of 6 ft (1.8 m) Part Number 76314,
fill hoses 10 ft (3.0 m) Part Number 350008

Optional Pedestal

This pedestal (with storage drawer) is available in three colors.
To order, call your local Sears store. For further information,

please call1-800-4-MY-HOM E®(1-800-469-4663). i! i

Pedestal Approximate Color Part

Height height with Number

washer

13" (33 cm) 51" (130 cm) White 42842

13" (33 cm) 51" (130 cm) Bisque 42844

13" (33 cm) 51" (130 cm) Graphite 42846

Stack Kit

Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions included with the kit. See
"Location Requirements."

Selectingtheproperlocationforyourwasherimproves
performanceandminimizesnoiseandpossiblewasher"walk."

Yourwashercanbeinstalledunderacustomcounter,orina
basement,laundryroom,closet,orrecessedarea.See"Drain
System."

Companionappliancelocationrequirementsshouldalsobe
considered.Properinstallationisyourresponsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the
washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of
20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (2.5 cm) under
entire washer. Installing the washer on soft floor surfaces,
such as carpets or surfaces with foam backing are not

recommended.

• A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures.

Installation clearances

• The location must be large enough to allow the washer door
to be fully opened.

• Additional spacing should be considered for ease of
installation and servicing.

• Additional clearances might be required for wall, door, and
floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.

• Companion appliance spacing should also be considered.

Washer Dimensions

501/2"

(128.3 am}

38 ==

(9&5cm)

Recommended installation spacing for custom
undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

(

39" rain

(99.0cm)

r' _ 27"--_1._.' r'

(2.5 cm) (68.6 era) (2.5 era)

Recommended installation spacing for recessed or
closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

34" '

(86.4 cm)

48 in=2 *-_ _ -

{310 cm 2)

#

24 in.2 *_ __

(155om_)

Ir' I._-31_/_"-_14"1-_--

{2.50m){80 cm){10.2 ore}

A

(7.6cm)

_- 3"

(7,6cm)

7

A. Side view - closet or confined area
B. Closet door with vents

Recessed or closet installation - Washer on pedestal

1" --_.._e-- 27"--_,- ._-- 1"

(2.5cm) (6&6cm) (2.5cm)

A

18" rrti_. _*

[_ {45.7 crrl)

Ir' I-,_3v/_"_1 4"

(2.5 cm)(80 ¢m}{102 cm)

B

A. Recessed area
B. Side view - closet or confined area

31!/_''

(80.0 cm)

Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 irL 2 *

(310 cm 2)

O

V

24 in_2 *

(155cm2)

5½"**_

(14era)

V

3" (7.6 cra)

Z

3" (7.6 cra)

76"

(193 cra)

(2.5era)

1" (2.5 cm)

'-7 /J

'ty -_/

(g&a cm) (2_5 cra)

*Min. top and bottom air openings for closet door.

**External exhaust elbow requires additional space.

***Wall, door and floor molding may require

additional spacing.

Recommended installation spacing for cabinet
installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation, with a door, the minimum ventilation
openings in the top are required.

(17.8cm)

,

7" (17.8cm)

_9"

, (22.9 cm)

a_,/_,, _

4

(_o.2_m)(Bo.ocm)(2.5_m)(2.5_m)(ss.s_m)(2.5_m)

The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of
2" (5 cm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and
no higher than 96" (2.4 m) from the bottom of the washer.

30" mirL

(76.2 cra)

A

Laundry tub drain system (view A)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top
of the laundry tub must be at least 30" (76.2 cm) above the floor.

Floor drain system (view B)
The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

A

EHectrical Shock Hazard

Plug into a grounded 3 prong outBet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Fa}_ure to follow these instructions can resuJt in death,

fire, or electrical shock.

A 120-volt, 60-Hz., AC-only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit
serving only this appliance be provided.

This washer is equipped with a power supply cord having a
3 prong grounding plug.

To minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances. If a
mating outlet is not available, it is the personal responsibility

and obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.

Ifcodes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the
ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the
washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:
This washer must be grounded. In the event of a maIfunction
or breakdown, grounding wiII reduce the risk of electrical
shock by providing a path of Ieast resistance for electric
current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding pIug. The
plug must be plugged into an appropriate outlet that is
properIy instalIed and grounded in accordance with all local

codes and ordinances.

WARNING: improper connection of the equipment-

grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.

For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.
Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the unit is

within approximately 3 ft (90 cm) of the final location.
There are 4 bolts in the rear panel of the washer that support the

suspension system during transportation. These bolts also retain
the power cord inside the washer until the bolts are removed.

1=

2.

Using a 13 mm wrench, loosen each of the bolts.
Once the bolt is loose, move it to the center of the hole and

completely pull out the bolt, including the plastic spacer
covering the bolt.

Connect the inlet hoses to the water faucets

Make sure the washer drum is empty.

1. Attach the hose with the red color indicator to the Hot (left)
inlet valve. Attaching the red coupling first makes it easier to
tighten connection with pliers. Screw on coupling by hand

until it is seated on the washer.

2. Attach the hose with the blue color indicator to the Cold
(right) water inlet valve. Screw on coupling by hand until it is

seated on the washer.

Using pliers, check the tightness of the hose couplings
already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

4. Attach the hose with the red color indicator to the hot water
faucet. Screw on coupling by hand until it is seated on the

washer.

5. Attach the hose with the blue color indicator to the cold water
faucet. Screw on coupling by hand until it is seated on the

washer.

6. Using pliers, tighten the couplings with an additional
two-thirds turn.

3. Once all 4 bolts are removed, discard the bolts and spacers.
Then pull the power cord through the opening of the rear
panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your
local service center. To prevent suspension and structural
damage, your machine must be properly set up for relocation by

a certified technician.

NOTE: Do not overtighten. Damage to the coupling can result.
Turn on the water faucets and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.

!::iiiiOLliii)(!!!:_¸_iiil_,i!!i_¸i[])_'iiiiiiiiSiii__!AiOS=_!I!!)

Proper routing of the drain hose protects your floors from
damage due to water leakage. Carefully read and follow these

instructions.
The drain hose is connected to your washer.

To prevent drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess
drain hose into standpipe. Hose should be secure, but loose
enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor Drain under "Tools and
Parts."

1.

2.

Drape the power cord over the washer top.
Secure the drain hose to the laundry tub leg or standpipe with

the beaded strap provided. (See illustrations A and B.)

C

Ifthe washer faucets and the drain standpipe are recessed
(see illustration C), put the hooked end of the drain hose in
the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer prevents excessive noise and
vibration.

1. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side, then front to back.

i

2.

3.

Make sure that all four feet are stable and resting on the floor.
Then check that the appliance is perfectly level (use a level).

After the washer is level, use a 17 mm open-end wrench to
turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All 4 feet must be tightened. If the nuts are not
tight against the washer cabinet, the washer may vibrate.

4. When pushing on the edges of the washing machine top
plate, the machine should not move front to back, side to
side, or diagonally.

5. Slide the washer to its final location.

6. Confirm the levelness of the washer.

2.

3.

4.

5.

6.

7.

8.

g.

Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See "Electrical Requirements."

Check to be sure all parts are now installed. If there is an
extra part, go back through the steps to see which step was
skipped.

Check to be sure you have all of your tools.
Dispose of or recycle all packaging materials.

Check to be sure the water faucets are on.
Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outet.
Do not remove ground prong.

Do not use an adapter.
Do not use an e×tension cord.

Failure to foiow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.
Read "Washer Use."

To test and to clean your washer, measure 1/2the normal
recommended amount of powdered or liquid High Efficiency
(HE) detergent. Pour the detergent into the detergent
dispenser. Select NORMAL/CASUAL, and then select START.
Allow the washer to complete one whole cycle.

10

Ifthe washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wood block and adjust the feet as necessary;
then prop the back and adjust feet as necessary. Repeat this
step until washer is level.

FEATURESAND BENEFITS

SENSOR SMART TM Electronic Controls
Flexible electronic controls are easy to use whether you are a

beginner or an expert.

Detergent Advantage System Dispenser

The four compartments in the dispenser allow loading of all
laundry additives before the washer is started. The additives will
be dispensed into the wash at the optimal time for high
performance cleaning. TIMED BLEACH TM release is included in
the detergent advantage system. The detergent is added at the
beginning of the cycle and the bleach is added after the enzymes
have had a chance to do their cleaning. The fabric softener is
dispensed in the rinse cycle. The Detergent Advantage System
Dispenser tray is easily removed for cleaning.

Auto Water Level
Adjusting to the size of the load, this feature allows the washer to

use the minimal amount of water needed to clean and rinse the
clothes. With a low water level, you can obtain the same results

with smaller amounts of additives. Because only the required
amount of water is used, the washer saves energy, too.

Larger Load Size

Since there is no agitator, you can wash larger, bulkier items such
as an average size sleeping bag. You are also able to wash more
clothes at one time, which means fewer loads. You can wash a
pillow or a large stuffed teddy bear.

Suspension System
To reduce washer "walk" and "off-balance" conditions, your new

washer combines:

• 2 Springs to isolate vibration

• 4 Shock absorbers at the washer base to minimize movement

Thermal Optimizer

The heating system ensures that the wash water is heated to the
preset temperature for Heavy Duty, Whitest Whites, Sanitary, and
the Stain Treat option. It also provides "stepped cleaning" when
using the sanitary cycle or the stain treat option. "Stepped
cleaning" starts the wash cycle with warm water to remove stains
(such as blood or grass). The water continues heating in order to
remove stains such as dirty mechanical oil. During the sanitary
cycle, the thermal optimizer can heat the water to temperatures
that will destroy 99.999% of three common types of bacteria
found in soiled laundry.

Add A Garment

When this option is available at the beginning of the cycle the
Add A Garment status light will glow for the first 8 minutes. This
washer allows an 8-minute period in which forgotten garments
may be added to a load.

CATALYST _ Cleaning Action with Direct Injection
A concentrated detergent solution is sprayed onto the clothes at

the beginning of the cycle to ensure that the detergent comes
into contact with the clothes as quickly as possible, removing
stains from your clothes without pretreating.

Dynamic Balance

A precision balancing system that allows the washer to reach
spin speeds of up to 1,300 rpm. The washer spins faster so that

clothes coming out of the washer will dry faster. In addition, if the

Dynamic Balance system detects off balance loads during
spinning, it redistributes the clothes so that they are evenly

balanced.

Stainless Steel Drum
The Stainless Steel drum eliminates corrosion and enables higher

spin speeds for more water extraction, reducing drying time.

Adaptive Variable Speed Motor

The motor adapts to the load size and to the cycle selected to
give the optimum cleaning, rinsing, and spinning conditions. The
motor can handle slow speeds needed for wool and delicate
items and is powerful enough to drive a large clothes load into a
1,300 rpm spin.

High-Efficiency Wash System
Your new front-loading, high-efficiency washer saves time with

fewer, larger loads, conserves resources and lowers your water
and energy bills too.

Spin Speeds
This washer automatically selects the spin speed based on the

cycle selected. This factory setting can be changed, however.
This washer offers up to six different spin speed choices.

11

WASHER USE

OPTIONS MODJPPERS

WASH CYCLES

[SliP,i/_[

EXPRESS WASH BrIFi__,,IrIr_

STATUS CUSTOM PROGFiAM NORMAL / KIDS WEAR PREWASH /kLO iE':_ C,qf:

,_: _ C,_,, r_]O CASUAL _ o EXTRA HOT / COLD o E;{T_A HIGH

/

DELAY STAIN TREAT @HOT/COLD OHIGH

','_ ! o HEAVY _ WOOL • HEAVY

DUTY / • WARM / WARM O MEDIUM

[ @

;_q ® SOAX • HORMAL /

S;IN Q _ _ WHmTES • LIGHT SAVEpLusENERGY @ WAGE4 / COLD @ LOW

' WHITES _LTRA DELmCATE _..........

@ ' @ COLD / COLD @ EXTRA LOW

i H s ,r_O RINSE & SPIN \ /

J

I _q: • BULKY / BEDDING SANITARY SO_L LEVEL _'_AUE_ EXTENDED SPIN • TAP COLD / COLD @HO SP;N

i) /I;_IE[ @ DRAIN & SPIN _ / /

>1 ; 4:_1b ./ ........../

:o_b Ol END of CYCLE WATEff TEMP SPIN S_EED

(F

O SkinCare Rinse

2NOFtINSE

@ I'_OR_AL RINSE

i 9

RINSE

OPTIONS

Fire Hazard

Never place items in the washer that are dampened
with gasotine or other flammaMe fluids,

No washer can compmetemy remove oil
Do not dry anything that has ever had any type of oi_ on

it (including cooking oi_s).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.

The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.

Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.

First Wash Cycle Without Laundry
Before washing clothes for the first time, choose the Normal/
Casual cycle and run it without clothes. Use _/_the normal
recommended amount of powdered or liquid High Efficiency (HE)
detergent. This initial cycle serves to ensure the interior is clean
before washing clothes.

1. To load washer
Open the washer door by pulling on the handle.

Sort laundry according to color and type of fabric. Place a
load of sorted clothes inthe washer. Do not overload washer.

Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

• Mix large and small items. Avoid washing a single item.

Load evenly.

2.

3.

Wash small items such as infant socks in mesh garment
bags. It is recommended that more than one garment bag
be used and that each garment bag be filled with equal

amounts of material.

• When unloading garments, occasionally check under the
rubber rim at the front of the tub for small items.

Close the washer door by pushing itfirmly until the lock clicks.
The washer door will remain locked during the wash cycle.

NOTE: After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin. The
door can be opened only if PAUSE/CANCEL is selected while
the ADD A GARMENT light is glowing or if the cycle has been
canceled. See "To cancel a Cycle."

Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See "Using the Dispenser."

NOTE: For best performance, use High Efficiency detergents.
The package for this type of detergent will be marked "HE" or
"High Efficiency."

4. Turn on the washer by selecting one of the WASH CYCLES.
The indicator light for the selected cycle will glow. When
selecting a Wash Cycle, the preset options, Water Temp, Spin
Speed, and Soil Level for the selected cycle will glow. The
display shows the estimated time remaining. The preset
settings provide the recommended fabric care for the
selected cycle. See "Wash Cycles."

5. Select the desired OPTIONS. Not all Options are available
with all cycles. See "Options."

6. Select the desired MODIFIERS. Not all Modifiers are available
with all Cycles and Options. See "Modifiers."

7. If desired, select the END OF CYCLE SIGNAL. The signal is
helpful when you are washing items that should be removed
from the washer as soon as it stops. Select ON or OFR

8. To begin the wash cycle immediately
Select and hold START (for approximately 1 second).

• Ifyou do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off.

• When the wash cycle is complete, the CLOTHES CLEAN

status light glows, the door unlocks, and the wash load
can be removed from the washer. The washer powers
down automatically 5 minutes after the cycle is complete
and the CLOTHES CLEAN light goes off. To power down
the washer manually after the wash cycle is complete,

select PAUSE/CANCEL once.

12

To begin the wash cycle later
Select DELAY until the desired delay time (in hours) shows in
the Estimated Time Remaining display. Select START. The
countdown to the wash cycle will show in the display window.

_:::::, ....

Your new washer has a dispenser drawer with four separate
compartments for your laundry products--two are for detergent,
one is for liquid chlorine bleach, and one isfor liquid fabric softener.
Laundry products are diluted and dispensed automatically at the
proper time during the wash cycle, making it unnecessary for you
to return to the washer during the cycle to add them.

It is normal for small amounts of water to remain in the
dispensers when the wash cycle is complete.

Do not put laundry additives directly into the wash tub. Always
use the proper dispensers when adding laundry products.

Choosing the Right Detergent
For best washing performance, use a High Efficiency (HE), or

low-sudsing, detergent.
To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer carefully and completely (to
avoid spillage).

Dispenser

A. Prewash detergent compartment

B. Separator

C. Main Wash detergent compartment

D. Dispenser release lever
E. Chlorine bleach compartment
F. Fabric softener compartment

Prewash detergent compartment

(Letter A in Dispenser Illustration)
Add detergent to this compartment when using the Prewash

option or Soak cycle. Liquid or powdered detergent may be used
in this compartment. The detergent will automatically be

dispensed during Prewash if the Prewash option is selected or
during the soak time ifSoak is selected.

• Using High Efficiency (HE) detergent, add 1/3the
recommended amount to the prewash compartment and 2/3

the recommended amount to the main wash compartment.

Main Wash detergent compartment

(Letter C in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for

your main wash cycle. The detergent separator must always be in
place, either in the front or back position.

IMPORTANT: Ifyou are using the Prewash, Soak or Delay option,
powdered detergent must be used in the main wash
compartment since liquid detergents may seep out of the main
wash compartment, before the main wash begins.

• Do not fill beyond the "MAX" level.

• Liquid or powdered color-safe bleach may be added to the
Main Wash compartment along with the same type of
detergent, liquid or powdered.

Liquid detergent: Put the SEPARATOR in the front position,
between the guides, as shown following. There will be no gap
between the bottom of the wash cycle detergent
compartment and the bottom of the separator.

LIQUt

SO

Separator in front position, between guides

A. Separator

B. Guide

Powdered detergent: Put the SEPARATOR in the back
position, behind the guides, as shown following. There will be
a gap between the bottom of the wash cycle detergent
compartment and the bottom of the separator.

A

I

[] POWDER PREWASHA|

..........<_ LiQUiD MABNWASH_ !

Separator in back position, behind guides

A. Separator
B. Guide

LIOUI

SO

-ll-

_J

NOTE: The separator will be in the powder (back) position when
shipped from the factory.

13

Chlorine bleach compartment

(Letter E in Dispenser Illustration)
Add NO MORE THAN 1/3cup (80 mL) liquid chlorine bleach to this

compartment, The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach,

• Always measure liquid chlorine bleach, Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer's

directions for safe use.

• Do not fill beyond the "MAX" level.

NOTE: Overfilling could cause severe garment damage.

Fabric Softener compartment

(Letter F in Dispenser Illustration)
Add 1Acup (60 mL) liquid fabric softener to this compartment.

Fabric softener will be automatically dispensed in the final rinse.

• Do not fill beyond the "MAX" level,

1. To pause the washer at any time, select PAUSE/CANCEL

2. To continue the cycle, select and hold START (for
approximately 1 second).

Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before

START is selected.
Options and Modifiers can be changed anytime after START is

selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle

1. Select PAUSE/CANCEL twice.

2. Select desired cycle.

3. Select the desired OPTIONS and MODIFIERS.

4. Select and hold START (for approximately 1second) to restart
the washer at the beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can
be removed.

NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has started

1. Select PAUSE/CANCEL

2. Select the desired OPTIONS or MODIFIERS.

3. Select and hold START (for approximately 1 second) to
continue the cycle.

To drain the washer manually

1. Select PAUSE/CANCEL

2. Select DRAIN & SPIN.

3. Select and hold START (for approximately 1 second) to begin
the drain.

4. When the spin is complete, the door unlocks, Items can be
removed from the washer.

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.

SOAK/ PREWASH•

WASH@

RINSF@

SPIN@

CIOTHESCLEAN0

CONIRO_LOCKED@

DOORLOCKED@

Adding items

This washer allows an 8-minute period in which forgotten

garments may be added to the load. You can add items to the
washer, if the ADD A GARMENT status light is glowing.

To add items

1. Select PAUSE/CANCEL The washer door unlocks, and items
can be added.

2. To continue the cycle, close the door and select and hold
START (for approximately I second).

3. To unlock the door after the Add a Garment period, press
Pause/Cancel twice. This will Cancel the Wash Cycle.

Clothes Clean

The Clothes Clean light stays on for 5 minutes after the cycle is

complete. The washer will then power down.

Locking controls

The Control Lock prevents unintended use of the washer. You

can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for Pause/Cancel and Start,
You can lock the controls while the washer is operating.

To lock the controls

Select and hold DRAIN & SPIN for 3 seconds,

DRAmN&SPIN

PRESSY_ItOI D 3

SECONDS 10 IOCK /

UNLOCK CON IRQI

The CONTROL LOCKED status light glows.
To unlock the controls

Select and hold DRAIN & SPIN for 3 seconds until the CONTROL
LOCKED Status light turns off.

Door Locked

Whenthe status light glows, the door is locked.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,

water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.

The SUDs routine removes extra suds and assures proper rinsing

of your garments. During the unbalance routine the time
displayed may pause until this activity is complete, then resume
with the remainder of the cycle.

14

Wash Cycles

Choose Wash Cycles by selecting the button next to the desired
cycle. Each cycle is designed for different types of fabric and soil

levels.

NORMAL /

CASUAL

HEAVY

DUTY

WHITEST

WHITES

WASHCYCLES

EXPRESSWASH

KiDs WEAR

S',%,CATE

SULKY / SEDDING SANITARY

Each cycle has a preset Soil Level (cycle time), Water
Temperature, Spin Speed and may have preset Options. The
preset settings provide the recommended fabric care for the
selected cycle.

The preset settings can be changed anytime before START is
selected. Not all Options and Modifiers are available with all
Cycles. (To change settings after the cycle has started, select
PAUSE/CANCEL, then select the desired settings. Select and
hold START [for approximately 1 second] to continue the
cycle.)

Preset cycle settings

Each cycle has a preset Cycle Time, Water Temp, and Spin
Speed. The preset settings provide the recommended fabric care
for the selected cycle. See chart.

Cycle Soil Water Temp Spin

Level Speed
(hr:min)

Sanitary Heavy Extra Hot/ Extra High

(2:00) Cold

Bulky/Bedding Normal Warm/Cold Extra Low

(0:55)

Whitest Whites Heavy Hot/Cold Extra High

(1:10)

Heavy Duty Heavy Hot/Cold Extra High

(1:35)

Normal/Casual Normal Warm/Cold High

(o:45)

Express Wash Light Warm/Cold Extra High
(2-3 items) (0:30)

Kids Wear Heavy Warm/Cold Extra High

(1:10)

I-landwash/ Normal Cold/Cold Extra Low

Wool (0:35)

Silk/Ultra Normal Cold/Cold No spin
Delicate (0:30)

Cycle Soil Water Temp Spin

Level Speed

(hr:min)

Soak Normal Warm/Cold No Spin

(o:3o)

Rinse & Spin Normal Cold/Cold Extra High

(0:20)

Drain & Spin Normal Cold/Cold Extra High

(0:12)

Sanitary
Use this cycle to clean heavily soiled colorfast fabrics. This cycle

combines a very hot water temperature and fast-speed tumbling
to help ensure the removal of heavy soils and stains. It is
recommended that you set your hot water heater to 120°F (49°C)
to ensure proper performance during this cycle. The Sanitary
cycle also helps eliminate 99.999% of 3 common infectious
bacteria, even when no bleach is used. Extra high speed spin
helps shorten drying time.

Bulky/Bedding

Use this cycle to wash large items such as blankets and
comforters. This cycle starts with a soak to thoroughly saturate
your large load. This is followed by medium wash action and
extra low spin speeds to maintain load balance.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled
white fabrics with the addition of bleach. Hot washing _'_'_

temperatures assure optimal bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer
wash time, and extra high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily
soiled garments. This cycle combines fast-speed tumbling, longer

wash time, and extra high speed spin to shorten drying times. If
the water temperature is lower than needed for this cycle, the

heater will warm the water to the optimum temperature.
NOTE: Stain Treat is a default option for this cycle. To ensure

best performance, the water is heated as the cycle progresses.
This gradual heating assists in the removal of organic soils such

as blood. Stain Treat must be turned off to change the modifiers.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press
blends, cottons and linens, and synthetic fabrics. This cycle
combines medium-speed tumbling, high-speed spin, and a load
cooling process to reduce wrinkling.

Express Wash
Use this cycle to wash small loads of 2-3 lightly soiled garments

that are needed in a hurry. This cycle combines fast-speed
tumbling, a shortened wash time, and extra high speed spin to
shorten drying time. Large wash loads will result in the machine
increasing the wash time.

Kids Wear

This cycle is specifically designed to clean and thoroughly rinse
children's clothing. The SkinCare rinse with extra water provides

optimal rinse performance to minimize detergent residue. This
cycle combines fast-speed tumbling and extra high spin speeds

to shorten drying time.

15

Handwash/Wool

Use this cycle to clean washable woolen and special care garments.
(Check label instructions to make sure that the garment is

washable.) Similar to the way garments are hand washed in a sink,
the wash action of this cycle combines periods of extra low tumbling

speeds and soaking. Low spin speeds minimize wrinkling.

Silk/Ultra Delicate

Use this cycle to clean washable silk and ultra delicate garments.
(Check label instructions to make sure that garment is washable.)

This cycle gently tumbles and drains without spinning to gently
clean garments and minimize wrinkling. Garments will contain a

higher amount of water at the end of this cycle, because ther is
no spinning action.

Extra Cycles

Select the button for the desired cycle.

CUSTOMPROGRAM

Rinse & Spin

Use this cycle to get a rinse and spin only. This cycle combines

fast-speed tumbling and extra high speed spin. If desired, you

can reduce the spin speed by selecting the speed you want from

the SPIN SPEED modifier.

Rinse & Spin is useful for

• Loads that need rinsing only.

• Adding fabric softener to a load using the fabric softener
dispenser.

Drain & Spin

Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to extra high. If desired, you
can reduce the spin speed by selecting the speed you want from

the SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and
woolens should be drained with no spin or low spin to avoid

fabric stress.

PRESS & HOID 3 SEC.

SOAK

RINSE& SPiN

As with any new product, you will hear sounds that you are not

accustomed to. You may hear various sounds when the door is
locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. (See "Troubleshooting.")

DRAIN & SPiN

You can change the selection anytime before START is selected.

Custom Program

Custom Program allows you to store a customized wash cycle for
future use.

To Customize a Wash Cycle:

1. Select a cycle.

2. Select the desired Options.

3. Select the desired Modifiers.

4. To save the cycle press and hold CUSTOM PROGRAM
(approximately 3 seconds) until a beep sounds and the letters

"SET" are displayed on your machine.

5. Press START.

6. To reuse this cycle at another time, select CUSTOM
PROGRAM and press START.

Soak
Use the Soak cycle to remove small spots of set-in stains on

fabrics. This cycle provides a soak time with warm or cold water
followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum
movement improve the removal of set stains. Drain without spin
assures gentle treatment, even for delicate articles.

Using the Soak Cycle: The Soak cycle provides a soak time with
warm or cold water followed by drain.

1. Add detergent only to the Prewash compartment of the
Dispenser Drawer.

2. Select DRAIN & SPIN or RINSE & SPIN first, then SOAK.

3. Choose the desired soak temperature.

4. Select and hold START (approximately 1 second).

You can customize your wash by adding OPTIONS to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.

OPTIIONS

/

• •

PREWASH

STAINTREAT

/J ••.

SAVE ENERGY

PLUS

/ @

EXTENDED SPIN

ENDof CYCLE

SIGNAL

01! / OFF

See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.

You can select more than one option for a cycle. Some
options cannot be added to some cycles, for example, Stain
Treat cannot be added to the Express Wash cycle.

If an option is available with a selected cycle, the light for that
option will glow when selected.

If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not glow when

selected.

16

Prewash

Use this option for loads of heavily soiled items that need
pretreatment. This option adds a 15-minute prewash and drain to
the main wash cycle.

• Add detergent to the Prewash and Main Wash compartments
of the Dispenser Drawer.

• When using Prewash, do not use liquid detergent in the Main
Wash compartment. Use powdered detergent for the main
wash cycle (see "Using the Dispenser").

NOTE: The Prewash and Soak options cannot be selected at the
same time.

Stain Treat
Use this option for heavily soiled loads that need improved stain

treatment. When Stain Treat is selected, the water temperature of
the selected wash cycle is automatically set to warm. The water
will then be heated to a hot water temperature to aid in stain
removal. This option will provide optimal removal of organic

stains such as blood.

NOTE:

• If Stain Treat is selected with the Sanitary cycle, the water will
be heated to a very hot temperature.

• The Stain Treat and Energy Saver options cannot be selected
in the same cycle.

Save Energy Plus

The Save Energy Plus option allows you to increase your energy
savings on the higher temperature cycles (Whitest Whites and
Heavy Duty) while maintaining cleaning performance by
lengthening the wash time by only 10 minutes.

NOTE: For the best energy performance, use the Normal/Casual
Cycle.

Extended Spin

Use this option to add an additional spin to any cycle to improve
drying times for some heavy fabrics or special-care items by
reducing excess water, which may save energy.

End of Cycle Signal

This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFE

Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles.

MODIFIERS

AU[© l',M! > CON fR©L

O EXTRAHOT/ COLD • EXTRAHiGH

e HOT/ COLD • HiGH

e WAR# / WAR# • MEDIUM

o WARM/ COLD OLOW • Sk_hCoreRinse

e COLD/ COLD e EXTRALOW • 2ND RINSE

0 TAPCOLD/ COLD ® NO SPiN O NORMAL RINSE

/ .... / \ J

WATER TEMP SPiN SPEED RINSE

,'_JAslf/ qr_sE OPTIONS

To change the water temperature, select the WATER TEMP
button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button
until the desired setting glows.

• HEAVY

• NORMAL

• LIGHT

SOIL LEVEL

• To change cycle time, select SOIL LEVEL button.

Normal Rinse

Consists of a two phase rinsing process that is effective for every
day laundry.

2nd Rinse

A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse. This is
the default rinse setting for the Whitest Whites cycle.

SkinCare Rinse
This option provides the best rinse level among all others, to

allow for even better detergent removal.

Wash/Rinse Temp
Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

Temperature Guide

Wash Water Temperature Suggested Fabrics

Extra Hot Sturdy colorfast fabrics

Heavy soils

HOT* Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

*When used with Stain Treat option, the water is heated

gradually to assist in the removal of organic soils such as
blood.

In wash water temperatures colder than 70°F (21°C), detergents
do not dissolve well. Soils may be difficult to remove.

17

Auto Temp Control •

ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold •

water. The ATC is automatically turned ON when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")

• ATC ensures consistent cleaning. •

• ATC works for the wash temperature with Extra Hot/Cold,
Hot/Cold, Warm/Warm, Warm/Cold, and Cold/Cold settings.

The Cold rinse temperatures depend on the cold water at
your faucet.

For the Tap Cold/Cold setting, both wash and rinse
temperatures depend on the cold water at your faucet.

ATC works for the rinse temperature with the Warm/Warm
setting. The cold rinse temperature depends on the cold
water at your faucet.

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Prewash* Stain Save Rinse Extended

Treat Energy Options Spin

Plus

Sanitary Heavily soiled underwear, towels, work clothes, v' v' v' v'

diapers, etc.

Bulky/Bedding Normally soiled blankets and comforters v'

Whitest Whites Soiled white fabrics v' v' v' v' v'

Heavy Duty Heavily soiled underwear, towels, shirts, etc., made v' v' v' v' v'

of cotton

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of v' v' v' v'

polyester, nylon, cotton, linen, or cotton blends

Express Wash Small loads of 2-3 lightly soiled cotton, polyester, v' v'

nylon, and cotton blends.

Kids Wear Children's clothing or any fabric that requires extra v' v' v' v'

rinsing

Nandwash/ Woolens with a felt-free finish and special-care v'

Wool items identified as machine washable.

Silk/Ultra Silk or Ultra Delicate fabrics identified as machine v'
Delicate washable.

* Prewash and Soak cannot be selected at the same time.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of
your garments.

• Close zippers, snaps, and hooks to avoid snagging other
items. Remove pins, buckles, and other hard objects to avoid
scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best
results.

Mix large and small items, avoid washing single items, load
evenly.

Wash small items such as infant socks in mesh garment
bags. It is recommended that more than one garment bag be

used and that each garment bag be filled with equal amounts
of material.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if
they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,
permanent press). When possible, turn lint-givers inside-out.

• Separate dark colors from light colors, colorfast items from
noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate
items).

18

Unloading

• Remove clothes from washer after the cycle is completed.
Metal objects such as zippers, snaps, and buckles may rust if
left in the washer basket for a long time.

• When unloading garments, occasionally check under the
rubber rim at the front of the tub for small items.

Loading suggestions (maximum size loads)

Heavy Work Clothes

4 jeans 2 sweatpants
4 workpants 2 sweatshirts

4 workshirts

Towels
10 bath towels

10 hand towels

14 washcloths

Mixed Load

3 sheets (1 king, 2 twin) 9 T-shirts
4 pillowcases 9 shorts

3 shirts 10 handkerchiefs
3 blouses

EXPRESS WASH cycle 2 dress shirts
(2-3 garments) 1 pair dress pants

WASHER CARE

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.

Cleaning the interior
Use a soft damp cloth or sponge to occasionally wipe the inner

door to remove any detergent residue. Use mild soap and water.
Do not use abrasive products.

Cleaning the door seal
Use a soft damp cloth or sponge when necessary. Check the fold

of the seal periodically for any foreign objects.

Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.

1. Unlock the dispenser drawer by pressing the Release Lever in
the Prewash compartment. See "Using the Dispenser."

Remove the drawer.

2. Remove the inserts (the siphon from the softener and bleach
compartments and the separator).

3. Wash the parts under running water.

4. Replace the inserts and return the dispenser to the drawer.

Replace inlet hoses after five years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Install and store your washer where it will not freeze. Because
some water may stay in the hoses, freezing can damage your
washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid
accidental flooding (due to a water pressure surge) while you
are away.

• Slightly open door to provide ventilation.

To winterize washer:

1. Put 1 qt (1 L) of R.V.-type antifreeze in the drum.

2. Run washer on a Drain & Spin cycle.

3. Unplug washer or disconnect power.

4. Shut off both water faucets.

5. Disconnect water inlet hoses from faucets and drain.

To use washer again:

1. Flush water pipes.

2. Reconnect water inlet hoses to faucets.

3. Turn on both water faucets.

4. Plug in washer or reconnect power.

5. Run the washer through the Normal/Casual cycle with 1_the
normal recommended amount of HE detergent to clean out

antifreeze.

To transport the washer:

1. If washer will be moved during freezing weather, put in 1 qt
(1 L) of R.V.-type antifreeze in the drum. Run washer on a
Drain & Spin cycle.

2. Unplug the power cord.

3. Disconnect the drain hose from the drain system and attach
to rear panel clips.

4. Shut off both water faucets.

5. Disconnect the water inlet hoses from faucets, then drain the
hoses and clip them to the rear panel of the washer.

6. IMPORTANT: Call service. Do not reuse transport bolts. Unit
must be transported in the upright position. To prevent
suspension and structural damage, your machine must be
properly set up for relocation by a certified technician.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and
connect the washer.

2. Run the washer through the Normal/Casual cycle with 1_the
normal recommended amount of HE detergent to clean the
washer and remove the antifreeze, if used.

19

TROUBLESHOOTING

First try the solutions suggested here to possibly avoid the cost of a service call...

Washer displaying code message and tone sounds Washer stops

"FH" (Water Inlet Problem--no water or insufficient water
supply)

Select PAUSE/CANCEL twice to cancel the cycle. Unplug
washer or disconnect power.

Check the following:
Are water faucets completely turned on?

Are screens at inlet hose connection to washer clogged?
Are water inlet hoses kinked?

Are water inlet hoses frozen?
Plug in washer or reconnect power. Re-select cycle and press

START. If the problem remains, call for service.
"F02" (Drain Problem)

Select PAUSE/CANCEL twice to cancel the cycle. Unplug
washer or disconnect power.

Check the following:

Is the drain hose kinked?
Is the drain hose frozen?

Is the drain hose clogged?
Is the drain hose more than 96" (2.4 m) above the floor?

"SUD" (Suds Routine)
When excessive suds are detected, a suds routine
automatically starts. This routine removes extra suds and
assures proper rinsing of your garments. "SUD" is displayed
during rinsing and at the end of the cycle to inform you that
Suds Routine was activated. To avoid excessive sudsing, use
only HE detergents.

"F" Variables [F4 to F16] (Electrical Problem)
Select PAUSE/CANCEL twice to cancel the cycle. Select

DRAIN & SPIN if there is excessive water in the washer.
Re-select cycle and press START. Ifthe problem remains, call

for service.

Check the following:
Is the power cord plugged into a grounded 3 prong outlet?

Is there power at the plug?
Check electrical source or call electrician.

Has a fuse blown, or has a circuit breaker tripped?
If problem continues, call electrician.

Are you using an extension cord?
Do not use an extension cord.

Washer won't drain or spin

• Is the drain hose clogged, or the end of the drain hose
more than 96" (2.4 m) above the floor?

• Is your voltage low?
Check electrical source or call electrician. Do not use an
extension cord.

• Is the "SUD" routine active?
Cycle will complete once extra suds are removed.

• Is the load balanced?
A single or bulky item may cause imbalance. Add more items

or redistribute the load.

Washer makes noise or vibrates

Is the washer level?

The washer must be level. The four feet should be properly
installed, and the nuts should be tightened against the
washer cabinet.

As water is drained from the washer, you may hear air being
pulled through the pump. This happens during the end of
draining. It is normal.

Are you washing items with metal snaps, buckles or zippers?

You may hear metal items touching the washer drum. This is
normal.

Washer won't start

Check the following:

Is the power cord plugged into a grounded 3 prong outlet?
Is the washer door firmly shut?

Has a cycle been selected, but START has not been selected
and held for one second?

Is washer installed on a sturdy and solid floor?
Refer to the "Installation Instructions" for flooring

requirements. Noise and vibration may be reduced by placing
a piece of 3A"(19.1 ram) plywood underneath your washer.

The plywood may extend underneath both washer and dryer
to keep them at equal heights.

Water near washer

Was the door open after completion of last cycle?

Check household plumbing for leaks.

Washer won t fill, wash or rinse

Dispensers clogged or leaking

Check the following:

Is the power cord plugged into a grounded 3 prong outlet?
Is there power at the plug? Check electrical source or call

electrician.
Are the hot and cold water faucets turned on?

Is the water inlet hose kinked?

Are the water inlet valve screens clogged?

• Are the laundry products in the correct dispenser

compartment?

Add the correct amounts of detergent, fabric softener or
liquid chlorine bleach to the correct compartments. Add

powdered or liquid color-safe bleach to the Main Wash
compartment. Be sure to match powdered color-safe bleach

with powdered detergent or match liquid color-safe bleach
with liquid detergent.

• Is the detergent separator in the correct position?
Separator should be in the front position when using liquid
detergent and in the back position when using powdered
detergent.

20

Load too wet

• Did you use the right cycle for the load being washed?
Select a cycle with a higher spin speed.

Did you wash a single item or bulky items or have you
overloaded the washer?

A single item, bulky items, or overloading may cause
imbalance. Add items or try to evenly distribute your wet
laundry in the drum, and start a DRAIN & SPIN cycle. If the
laundry is still wet, take half of the load out of the washer and
try again.

Residue or lint on load

• Did you add detergent to the dispenser?
For best results, add detergent to the detergent

compartment. Do not add detergent to the washer drum.

• Did you sort properly?
Sort lint givers (towels, chenille) from lint takers (corduroy,

synthetics). Also sort by color.

Did you overload the washer?

Do not overload the washer. The washer can be fully loaded,
but not tightly packed. The wash load must be balanced. Lint

can be trapped in the load if overloaded.

• Checkthe following:
Was paper or tissue left in pockets?

• Did you use enough detergent?
Follow manufacturer's directions. Use enough detergent to

hold the lint in the water.

• Is your water colder than 70°F (21°0)?
Wash water colder than 70°F (21 °C) may not completely

dissolve the detergent.
Are you using a low speed wash cycle?

Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent for slow-speed

cycles such as Handwash/Woel and Silk/Ultra Delicate.

Stains on load

• Did you add detergent to the dispenser?
For best results, add detergent to the detergent
compartment. Do not add detergent to the washer drum.

Did you use enough detergent?
Use enough detergent to remove soil and hold it in suspension.
For best performance, use a High Efficiency detergent.
Follow manufacturer's recommendations for the type of load
you are washing.

• Is there above average iron (rust) in water?
You may need to install an iron filter.

• Did you properly sort the load?
Sort dark clothes from whites and lights.

• Did you unload the washer promptly?
To avoid dye transfer, unload the washer as soon as it stops.

• Did you use a fabric softener dispensing ball?
Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.

• Did you use powdered detergent in a low-speed cycle?
Consider using liquid detergent.

• Did you use Express Wash on a large load?
For best results, use Express Wash for small, lightly soiled

loads.

Load is wrinkled

Did you unload the washer promptly?

Unload the washer as soon as it stops.
Did you use the right cycle for the load being washed?

Use the SiIWUItra Delicate cycle or another cycle with a low
spin speed to reduce wrinkling.

Did you overload the washer?
The wash load must be balanced and not overloaded. Loads

should tumble freely during washing.

Gray whites, dingy colors

• Did you properly sort the load?
Dye transfer can occur when mixing whites and colors in a

load. Sort dark clothes from whites and lights.
Was the wash temperature too low?

Use hot or warm washes if safe for the fabric load. Make sure
your hot water system is adequate to provide a hot water

wash.

Did you use enough detergent, or do you have hard
water?

Use more detergent for washing heavy soils in cold or hard
water.

Cycle too long

Did you choose the Sanitary cycle or Stain Treat option?

In both cases the heater will be activated to provide

maximum cleaning performance. Additional time will be
added to the regular cycle to heat the water. This additional
time will depend on the load size and the hot water inlet
temperature.

Is "SUD" shown in the display?
Excessive sudsing has been detected and a suds routine has

been started to reduce excessive suds. This routine will add
time to the original cycle.

Did the load cause imbalance?
When too much imbalance occurs, an imbalance routine will

start to redistribute the load. During the imbalance routine the
time displayed may pause until this activity is complete, then

resume with the remainder of the cycle.
Did you wash a large load on the Express Cycle?

The Express Cycle is designed for smaller load sizes
(2-3 items) of lightly soiled garments. If larger loads are
washed in this cycle, wash time will be increased.

Did you wash a large load in a gentle or Delicate cycle?

When using the Express wash, Handwash/VVool, or SilWUItra
Delicate wash cycles you should use small loads. This
ensures a gentle wash for your garments without increasing
cycle times.

Door locked at end of wash cycle

Did all of the water drain out of the washer during the
spin?

Select DRAIN & SPIN to remove any water remaining in the
washer. The washer door will unlock at the end of the drain.

21

iNDICE

CONTRATOS DE PROTECCION ................................................ 22

En los EE.UU............................................................................. 22

En Canada ................................................................................. 23

GARANTiA .................................................................................... 23

GARANTIA DE LA OPOION DE PEDESTAL .............................. 24

SEGURIDAD DE LA LAVADORA ................................................ 25

REQUISITOS DE INSTALAOION ................................................ 26

Herramientas y piezas ............................................................... 26

Opciones ................................................................................... 26

Requisitos de ubicaci6n ............................................................ 27

Sistema de desagQe.................................................................. 28

Requisitos electricos ................................................................. 29

INSTRUCCIONES DE INSTALACION ........................................ 29

Eliminaci6n del sistema de transporte ...................................... 29

Conexi6n de las mangueras de entrada ................................... 30

Tendido de la manguera de desagQe ....................................... 30

Fijaci6n de la manguera de desagQe ........................................ 31

Nivelaci6n de la lavadora .......................................................... 31

Complete la instalaci6n ............................................................. 31

CARACTER|STICAS Y BENEFICIOS ......................................... 32

USO DE LA LAVADORA .............................................................. 33

Puesta en marcha de su lavadora ............................................ 33

Uso del dep6sito ....................................................................... 34

Pausa o reanudaci6n ................................................................. 35

Cambio de ciclos, opciones y modificadores ........................... 35

Luces de estado ........................................................................ 36

Ciclos ......................................................................................... 36

Sonidos normales ...................................................................... 38

Opciones ................................................................................... 39

Modificadores ............................................................................ 40

Gufa para el lavado .................................................................... 41

CONSEJOS DE LAVANDERIA .................................................... 42

C6mo cargar .............................................................................. 42

CUIDADO DE LA LAVADORA .................................................... 43

Limpieza de su lavadora ........................................................... 43

Mangueras de entrada del agua ............................................... 43

Cuidado durante las vacaciones,

el almacenamiento y la mudanza .............................................. 43

SOLUCION DE PROBLEMAS ..................................................... 44

NUMEROS DE SERVICIO .............................. CONTRAPORTADA

CONTRATOS DE

PROTECCION

Contratos Maestros de Proteccibn
iFelicitaciones per su inteligente adquisici6n! Su nuevo producto

Kenmore ®ha side diser3ado y fabricado para brindarle a_os de

funcionamiento confiable. Pero al igual que todos los productos,

puede necesitar mantenimiento preventivo o reparaci6n de vez
en cuando. Es allf donde el Contrato Maestro de Protecci6n

puede ahorrarle dinero e inconvenientes.

Adquiera un Contrato Maestro de ProtecciOn hey y prot_jase
contra molestias y gastos inesperados.

El Contrato Maestro de Protecci6n tambien ayuda a prolongar la
vida de su nuevo producto. He aquf Io que se incluye en el

Contrato:
v' Servicio experto por nuestros 12.000 especialistas en

reparaci6n competentes

v' Servicio ilimitado y gratuito para repuestos y mane de obra

en todas las reparacienes protegidas per el contrate

v' Garantia "sin disgustos" - reemplazo de su producto

protegido si ocurren cuatro o mas fallas del producto en el
transcurso de doce meses

v' Reemplazo del producto si su producto protegido no puede

ser reparado

v' Revisi6n Anual de Mantenimiento Preventivo a solicitud

suya - sin costo adicional

v'

Ayuda r_pida por tel_fono - asistencia per telefono a cargo
de un tecnico de Sears para productos que deban ser
reparados en su hogar, ademas de un horario de reparaci6n

conveniente

v' Protecci6n de sobrevoltaje contra da_os electricos debido a

fiuctuaciones de electricidad

v' Reembolso de la renta si la reparaci6n de su producto

protegido tarda mas de Io prometido

Una vez adquirido el Contrato, tan s61o tiene que Ilamar para fijar
la visita de servicio tecnico. Usted puede Ilamar a cualquier hora,
de dia o de noche, o fijar una visita tecnica en internet.

Sears cuenta con un equipo de mas de 12.000 especialistas en
reparaci6n competentes, quienes tienen a disposici6n mas de

4,5 millones de repuestos y accesorios de calidad. Cse es el tipo
de profesionalismo con el que usted puede contar para ayudarle

a prolongar la vida de su nuevo artefacto por muchos a_os mas.
iAdquiera boy su Contrato Maestro de Protecci6n!

Se aplican algunas limitaciones y exclusiones. Para obtener
precios e informaci6n adicional, Ilame al 1-800-827-6655.

Servicio de Instalacibn de Sears
Para la instalaci6n profesional de Sears de artefactos

electrodomesticos, abridores de puertas de garaje, calentadores
de agua y otros articulos importantes de la casa, en los EEUU

Ilame al 1-800-4-MY-HOME ®.

22