Kenmore Elite 110.2708, Elite 110.2709, Elite 110.2706, Elite 110.2707 User Manual

Oasis HE

Automatic Washers

Lavadoras autombticas

Laveuses automatiques

Models/Modelos/Modeles 110.2706#, 2707#, 2708#, 2709#

# = color number, nQmero de color, numero de couleur

Designed to use only High Efficiency (HE) detergent

Disefiado para utilizar solamente detergente de alta eficacia

Congu pour I'utilisation d'un detergent haute efficacite

seulement

Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com

8567042 Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.ca

TABLEOF CONTENTS

PROTECTION AGREEMENTS ....................................................... 2

In the U.S.A ................................................................................... 2

In Canada ..................................................................................... 3

WARRANTY ..................................................................................... 3

WASHER SAFETY ........................................................................... 4

INSTALLATION REQUIREMENTS ................................................ 5

Tools and Parts ............................................................................ 5

Location Requirements ................................................................ 6

Drain System ................................................................................ 6

Electrical Requirements ................................................................ 7

INSTALLATION INSTRUCTIONS .................................................. 8

Before You Start ........................................................................... 8

Remove Shipping Base and Packing Ring .................................. 8

Connect Drain Hose ..................................................................... 8

Connect the Inlet Hoses ............................................................... 9

Secure the Drain Hose .............................................................. 10

Level the Washer ....................................................................... 10

Complete Installation ................................................................. 11

BENEFITS AND FEATURES ....................................................... 12

WASHER USE .............................................................................. 13

Starting Your Washer ................................................................ 13

Using the Proper Detergent ...................................................... 13

Pausing or Restarting the Washer ............................................ 14

Stopping the Washer ................................................................. 14

Changing Cycles, Modifiers and Options ................................. 14

Status Lights .............................................................................. 15

Cycles ........................................................................................ 15

Modifiers .................................................................................... 17

Options ...................................................................................... 18

Operating Controls .................................................................... 18

Normal Sounds .......................................................................... 18

LAUNDRY TIPS ............................................................................ 19

WASHER CARE ........................................................................... 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ...................................................................... 20

Vacation, Storage and Moving Care ......................................... 20

TROUBLESHOOTING .................................................................. 21

SERVICE NUMBERS ............................................... BACK COVER

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new Kenmere ®product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money and aggravation.

Purchase a Master Protection Agreement now and protect yourself from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of your new product. Here's what's included inthe Agreement:

v' Expert service by our 12,000 professional repair specialists v' Unlimited service and no charge for parts and labor on all

covered repairs

v' "No-lemon" guarantee - replacement of your covered

product iffour or more product failures occur within twelve months

v' Product replacement if your covered product can't be fixed v' Annual Preventive Maintenance Check at your request - no

extra charge

v' Fast help by phone - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair scheduling

v' Power surge protection against electrical damage due to

power fluctuations

v' Rental reimbursement if repair of your covered product takes

longer than promised

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.

Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's

the kind of professionalism you can count on to help prolong the

life of your new purchase for years to come. Purchase your Master Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information, call 1-800-827-6655.

Sears Installation Service For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the U.S.A. call 1-800-4-MY-HOME ®.

KENMORE ELITE WASHER

Maintenance Agreements

Your purchase has added value because you can depend on Sears HomeCentraP for service. With over 2,400 Service

Technicians and more than a million parts and accessories, we have the tools, parts, knowledge and skills to back our pledge:

We Service What We Sell. Your Kenmore ®product is designed, manufactured and tested to

provide years of dependable operation. But like all products, it may require service from time to time. The Sears Maintenance Agreement offers you an outstanding service program, affordably priced.

The Sears Maintenance Agreement

• Is your way to buy tomorrow's service at today's price

• Eliminates repair bills resulting from normal wear and tear

• Provides phone support from a Sears technician on products requiring in-home repair

• Even if you don't need repairs, provides an annual Preventive Maintenance Check, at your request, to ensure that your product is in proper running condition.

Some limitations apply. For more information about Sears Canada Maintenance Agreements, call 1-800-361-6665.

WARRANTY

One Year Full Warranty on Kenmore Washer For one year from the date of purchase, when installed and

operated according to the Use & Care Guide, this washer will be repaired (or replaced if repair proves impossible) free of charge if defective in material or workmanship.

Warranty Restrictions

• If this washer is used for other than private family purposes, this warranty applies for only 90 days from the date of purchase.

• Use of any laundry detergent not specifically designated for High Efficiency (HE) washers will void this warranty.

Warranty Service Warranty service is available by calling 1-800-4-MY-HOME ®.This

warranty applies only while this washer is used in the United States or Canada.

In the United States, this warranty gives you specific legal rights, and you may also have other rights which vary from state to

state. For Sears warranty information or to contact a Sears Service

Center, please reference the service numbers located on the back page of this manual.

Sears, Roebuck and Co.

D/817WA, Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2B8

Product Record

In the space below, record your complete model number, serial number, and purchase date. You can find this information on the

model and serial number label. Have this information available to help you quickly obtain

assistance or service when you contact Sears concerning your appliance.

Model number 110. Serial number

Purchase date

Inlet Hose replacement date

Inlet Hose replacement date Inlet Hose replacement date

Replace inlet hoses after 5 years of use to reduce the risk of hose failure.

Save these instructions and your sales receipt for future reference.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

m Read all instructions before using the washer. m Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

mDo not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or explode.

mUnder certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

SAVE THESE INSTRUCTIONS

_,Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used near children.

_,Before the washer is removed from service or discarded,

remove the door or lid.

_,Do not reach into the washer if the drum, tub or agitator is

moving.

_,Do not install or store the washer where it will be exposed to

the weather.

_,Do not tamper with controls. _,Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in published user-repair instructions that you understand and

have the skills to carry out.

_,See "Electrical Requirements" for grounding instructions.

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

• Pliersthat open to 19/16'' • Flashlight (optional) (3.95 cm)

Parts supplied:

A B C

A. Drain hose form B. Water inlet hoses (2)

C. Flat water inlet hose washers (4) D, Beaded tie strap

Alternate Parts

Parts listed are available from your local Sears store or Sears Service Center. For further information, call 1-800-4-MY-HOME ®

(1-800-469-4663}.

If You Have: You Will Need to Buy:

Laundry tub or Sump pump system (if not already standpipe taller available) than 96" (2.4 m)

1" (2.5 cm) 2" (5 cm) diameter to 1" (2.5 cm) diameter diameter standpipe adapter, standpipe Part Number 3363920 and connector kit

Part Number 285835

Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall

drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose, Part Number 8318155 and connector

kit, Part Number 285835

Water faucets 2 longer water fill hoses: beyond reach of 6 ft (1.8 m) Part Number 76314, fill hoses 10 ft (3.0 m) Part Number 350008

Lint clogged drain Drain protector, Part Number 367031

Tools needed for securing the drain hose and leveling the washer:

• Adjustable or open end • Wood block wrench 9_6"(14 mm) • Ruler or measuring tape

• Level

Selectingtheproperlocationforyourwasherimproves performanceandminimizesnoiseandpossiblewasher"walk."

Yourwashercanbeinstalledinabasement,laundryroom, closet,orrecessedarea.See"DrainSystem."

IMPORTANT:Donotinstallorstorethewasherwhereitwillbe exposedtotheweather.

Properinstallationisyourresponsibility.

Youwillneed:

• Awaterheatersettodeliver120°F(49°C)watertothe washer.

• Agroundedelectricaloutletlocatedwithin4ft(1.2m)of wherethepowercordisattachedtothebackofthewasher. See"ElectricalRequirements."

• Hotandcoldwaterfaucetslocatedwithin3ft(90cm)ofthe hotandcoldwaterfillvalves,andwaterpressureof 20-100psi(138-690kPa)forbestperformance.

• Alevelfloorwithamaximumslopeof1"(2.5cm)underentire washer.Installingthewasheroncarpetingisnot

recommended.

• Asturdyfloortosupportthewasherweight(washer,water andload)of315Ibs(143kgs).

Donotstoreoroperateyourwasherintemperaturesatorbelow 32°F(0°C).Somewatercanremaininthewasherandcancause damageinlowtemperatures.See"WasherCare"forwinterizing

information.

Installation spacing for recessed area and closet installations

The following spacing dimensions are recommended for this washer. This washer has been tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended spacing should be considered for the following reasons:

• Additional spacing should be considered for ease of installation and servicing.

Additional spacing should be considered on all sides of the washer to reduce noise transfer.

For closet installation with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

• Companion appliance spacing should also be considered.

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system--wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and

Parts."

The top of the standpipe must be at least 39" (99 cm) high and no

higher than 96" (244 cm) from the bottom of the washer.

(39")

99 cm

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the washer.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

olo

!"_ ._27,/="m-_-__" _ _"*t--27"÷i 3'L--1÷

(2.5cm} (69.9cm) (2.5cm)(2.5cm)(68.6cm) (!2.7 cm)

A B

A. Front view

B. Side view C. Closet door with vents

* Required spacing

_ i__

(3!0crn_)" _

24Irk .__

1155cr__)

__ 3"*

(7.6crn)

• Donotgroundtoagaspipe.

• Checkwithaqualifiedelectricianifyouarenotsurethe washerisproperlygrounded.

• Donothaveafuseintheneutralorgroundcircuit.

GROUNDING INSTRUCTIONS

ElectricalShockHazard

Pmuginto a grounded 3 prong outlet.

Do not remove ground prong, Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can resumt in death,

fire, or e_ectdcam shock,

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

This washer is equipped with a power supply cord having a 3 prong grounding plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

For a grounded, cord-connected washer: This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be pIugged into an appropriate outlet that is

properly installed and grounded in accordance with aII IocaI codes and ordinances.

WARNING: improper connection of the equipment-

grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify' the plug provided with the appliance - if it wilI

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanentmy connected washer: This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on the appliance.

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer. Failure to do so can result in back or other injury.

NOTE: To avoid floor damage, set the washer onto cardboard

before moving across floor. IMPORTANT:

• Be sure the foam shipping base has been removed from the bottom of the washer as directed in the Unpacking

Instructions.

• If foam shipping base has not been removed, be sure lid is secured with tape before laying washer on its back.

• Removing the foam shipping base is necessary for proper operation.

::::;; ; ::

1. Place cardboard supports from shipping carton on floor behind washer for support.

2. Using 2 or more people, tip the washer onto its back and place on cardboard supports.

3. Remove foam shipping base.

Set washer upright.

Remove tape from lid. Open lid and remove foam packing

!!1

ring from washer tub. Keep foam packing ring in case you need to move the washer in the future.

iiil

Proper connection of the drain hose protects your floors from damage due to water leakage. Read and follow these

instructions.

The drain hose is connected to your washer and is stored inside the washer cabinet.

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing

the pull tie. Continue to pull the hose until the end emerges. Do

not force excess drain hose back into the rear of the washer.

Laundry tub drain or standpipe drain

Connecting the drain hose form to the corrugated drain hose

A B

A. Feed end of drain hose into one end of form. Secure the lip of the

form into one of the hose ribs.

B. Bend the hose over the top of the form and feed into the other end

of the form. Secure the lip of form into one of the hose ribs.

4. Using pliers, tighten the couplings with an additional two-thirds turn.

Tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Clear the water lines

• Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket, to get rid of particles in the water lines that might clog the inlet valve screens.

• Check the temperature of the water to make sure that the hot water hose is connected to the hot water faucet and that the

cold water hose is connected to the cold water faucet.

To keep drain water from going back into the washer:

• Do not force excess drain hose into standpipe. Hose should

be secure but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

Do not install the drain hose form on to the corrugated drain hose. You may need additional parts. See Floor drain under

"Tools and Parts."

1. Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers inthe couplings.

A B

A. Coupling B. Washer

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

Connect the inlet hoses to the washer

A. Hot water inlet valve

B. Cold water inlet valve

1. Attach the hot water hose to the inlet valve labeled hot.

2. Attaching one hose coupling first makes it easier to tighten the connection with pliers.

3. Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

Attach the cold water hose to the inlet valve labeled cold.

Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can result.

1. Drape the power cord over the console.

2. Remove any cardboard used to move washer.

CC>

Beaded tie strap

Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap. See view A or B.

Check for leaks

• Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this in

a later step. NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement dates for future reference.

• If you connect only one water hose, you must cap off the

remaining water inlet port.

• Periodically inspect and replace hoses if bulges, kinks,

cuts, wear, or leaks are found.

A B

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the

drain hose. See view C.

One washer foot has been installed at a different height on your new washer. The other three feet were preset at the factory. Properly leveling your washer will minimize noise and vibration.

1. Slide the washer to its final location.

2. Push on upper front panel to be sure the washer is on its rear feet.

Lower right front foot until it contacts the floor. By hand, firmly rotate foot as much as an additional 11/2turns, The other three

feet have been preset at the factory.

Check the levelness of the washer by placing a level in the crease between the top of the washer and the cabinet, first

on the front and then on the side,

Level the front.

1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Keep the foam packing ring from the washer tub for future relocation of the washer. Dispose of or recycle all other packaging materials.

5. Check that the water faucets are on,

6. Check for leaks around faucets and inlet hoses.

Electricam Shock Hazard

Pmuginto a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter,

Do not use an extension cord, Faimureto follow these instructions can resumt in death,

fire, or eiectricam shock,

Level theside.

5. If the washer is not level, move the washer out slightly, tip back, prop up the front of the washer on a wood block, Adjust the feet up or down as necessary by twisting the feet. Repeat steps 1 through 4 until washer is level.

6. Use a 9/16"or 14 mm open-end wrench to turn the Iocknut counterclockwise on the foot tightly against the washer

cabinet, IMPORTANT: If the Iocknut is not tight against the washer

cabinet, the washer may vibrate.

7. Plug into a grounded 3 prong outlet.

8. Remove any protective film or tape remaining on the washer.

9. Read "Washer Use."

10. Totest and to clean your washer, measure 1/2of the detergent manufacturer's recommended amount of High Efficiency (HE) powdered or liquid detergent for a medium size load and pour it into the detergent dispenser. Close the lid. Press POWER. Select a normal cycle and press Start, Allow it to complete one whole cycle.

BENEFITS AND FEATURES

Your washer has several benefits and features that are summarized here. Some items may not apply to your model.

gentlewash TM High-Efficiency Wash System

Your new top loading, high-efficiency washer saves you time by allowing you to do fewer, larger loads. It also conserves resources and also lowers your water and energy bills by using

the following innovations.

Auto Water Level

This washer senses the load size and composition through a series of fills and wash motion. It then adjusts the water level for

the best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size. NOTE: You may notice during a cycle that the wash load is not completely submerged in water. This is normal for your washer.

Auto Temperature Control (ATC)

The Auto Temperature Control (ATC) on this washer electronically senses and maintains a uniform water temperature by regulating incoming water temperatures. Using ATC will help dissolve

detergent.

INVIZIBLE TM Agitator

Your new washer works differently than most washers that you are accustomed to. The most striking difference is that the

washer has an invisible agitator. It uses this new innovative agitator at the bottom of the wash basket to move your load through a mixture of water and detergent. The load is moved from the outside toward the middle with items coming up in the

center and down on the outside edges.

Dispensers

The dispensers make your washer truly automatic. It is unnecessary for you to return to the washer during the cycle to

add detergent, bleach, or fabric softener. Laundry additives are added to the load at the proper time in the

wash cycle.

Spin Speeds This washer is preset to automatically select the spin speed

based on the cycle selected. Depending on your wash load, you can change the preset speeds. The spin speed on this washer is nearly twice as fast as that of a conventional washer. You may notice different sounds during a spin cycle because of this higher

rate of speed.

Stain Treat (CATALYST _ Cleaning Action) The Stain Treat option helps to ensure better soil and stain

removal. Stain Treat reduces the need for pretreatment and is safe for all fabrics. Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then sprayed onto the load while the washer spins at low speed. This cleaning

action will last up to 5 minutes depending on the cycle selected. The washer then stops spinning, fills with water to the appropriate level and continues washing with the selected cycle.

Innovative Features

Your new washer includes these features that help to reduce noise, increase the ease of use and improve wash performance.

Electronic Controls Electronic controls with preset cycles are easy to use whether

you are a beginner or an "expert."

Quiet Operation

This washer is insulated with sound-dampening materials to

reduce washer operation sounds and noises. On some models, an additional tub wrap is added for superior vibration and sound-dampening.

Suspension System

To reduce washer "walk" and "out of balance" conditions, your

new washer combines:

• 4 Spring damper struts to isolate vibration

• Balance ring at the top and bottom of the wash basket to minimize vibration

• Operating software designed to sense and correct off-balance loads

Clean Washer Cycle

This washer features an easy-to-use Clean Washer cycle that thoroughly cleans the inside of your washing machine using

higher water volumes in combination with liquid chlorine bleach. Stainless Steel Basket

The stainless steel basket is corrosion resistant and enables

higher spin speeds for more water extraction, reducing drying

time.

Force Filter Wash/Rinse System

This washer filters 100% of the wash and rinse water. The water

is filtered then recirculated. The force filter traps sand and dirt,

flushing them down the drain, so they are not redeposited onto the clean clothes.

Save Energy Plus Option

The Save Energy Plus option allows you to increase your energy

savings on the higher temperature cycles (Whitest Whites and Heavy Duty) while maintaining cleaning performance by lengthening the wash time by only approximately 5 minutes.

Delay Start

Delay Start allows you to load your washer and pause the start of

the cycle for up to 13 hours.

High Efficiency (HE) Detergent This washer is designed for High Efficiency (HE) detergent use

only. HE detergents are made to produce the right amount of suds and give the best performance in low water wash systems.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the

wash cycle is finished. This signal is helpful when you are removing items from the washer as soon as it stops.

WASHER USE

STATUS

AddA Garment

Soak/ Prewash

NOTE: Your washer model may differ slightly.

Fire Hazard

Never place items in the washer that are dampened with gasoline or ether flammable fluids°

No washer can completemy remove oH, Do not dry anything that has ever had any type of oH on

it (including cooking oils). Doing so can reeumt in death, expmosion, or fire.

MODIFIERS

Medium

Ught NoSpin

Soil Spin Wash / Rinse

Level Speed Temp

AD usrs

wA_ TIM_

Cool/ Cold

Cold/Cold

OPTIONS

Save Energy Plus

2nd Rinse

Stain Treat

Auto Soak Prewash

Loud

Cycle Signal Volume

It may also result in component failures and noticeable mold or mildew. Use of regular (non-HE) detergent will void your warranty. See "Warranty."

Use only "HE" High Efficiency detergent.

Place a load of sorted clothes into the washer. See "Laundry Tips."

• Load evenly to maintain washer balance. Mix large and small items.

• Load only to the top of the basket as shown. Overloading can cause poor cleaning.

!!!!!!!!!!!!!!!!!!!!!!!!!

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance. The following is a guide to starting your washer. Periodic

references to other sections of this manual provide more detailed information.

Use only High Efficiency (HE) detergents. The package for this type of detergent will be marked "HE" or "High Efficiency." HE detergents such as TIDE° HE are made to produce the right amount of suds for the best performance in low water wash systems. Follow the detergent manufacturer's instructions to determine the correct amount of detergent to use. Your washer's new wash system will create too much sudsing if regular non-HE detergent is used. Using regular detergent will likely result in washer errors, longer cycle times and reduced rinsing performance.

Pour measured powdered or liquid High Efficiency (HE) detergent into the detergent dispenser. Do not put detergent

directly into the wash tub or onto clothes in the washer.

3. Add color-safe bleach (powdered or liquid) to this dispenser, if needed. Be sure to match powdered color-safe bleach with powdered detergent or match liquid color-safe bleach with liquid detergent.

4. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed. Bleach is automatically dispensed at the proper time during the wash cycle.

• Do not overfill. Do not dilute. Do not use more than 1 cup

(250 mL) for a full load. Use less with a smaller load size.

• Follow the garment and the chlorine bleach

manufacturer's directions for proper use.

• To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer basket.

• At the end of the cycle, a small amount of water may be

left in the dispenser. This is normal.

NOTE: Use only liquid chlorine bleach in this dispenser.

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

Add a Garment

You can place additional clothing in the wash when the "Add a Garment" status light is glowing without sacrificing wash performance.

To add a garment or pause the washer at any time

1. Press STOP once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items. To restart the washer

1. Close the lid and press START.

2. To unlock the lid after the Add a Garment period, press STOP once. Pressing STOP twice will cancel the wash cycle.

You can stop the wash cycle and drain the tub by pressing the Stop button twice or the Power button once.

You can change Cycles, Modifiers and Options anytime before Start is pressed. Not all Modifiers and Options are available for all cycles.

• A short tone sounds when a change is selected.

• Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.

• Do not overfill. The dispenser holds 3 oz (94 mL), or a capful of fabric softener.

• The fabric softener is dispensed in the rinse cycle. If 2nd

Rinse is selected, the fabric softener will be dispensed

during the 2nd Rinse.

• Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this

washer.

• Do not spill or drip any fabric softener onto the clothes.

• At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

6. Close the washer lid.

7. Press POWER. This turns on the washer display.

8. Select a Wash Cycle. See "Cycles."

9. Adjust the Modifiers, if desired. See "Modifiers."

10. Select desired Options. See "Options."

11. Select Delay Start, if desired. See "Delay Start" in the "Modifiers" section.

12. Press START. The wash cycle begins, and the display shows the estimated remaining time. The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing Power, the washer automatically shuts off.

Changing Cycles during the wash cycle

1. Press STOP twice to cancel the cycle. The washer will drain.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modifiers and Options.

5. Press START.

The washer restarts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of pausing the washer, the washer automatically shuts off.

Changing Modifiers and Options during the wash cycle You can change a Modifier or Option anytime before the selected

Modifier or Option begins. You must:

1. Press STOP once.

2. Select the desired Modifiers and/or Options.

3. Press START.

To manually drain the washer and spin the load

1. Press STOP twice to cancel the wash cycle and drain the washer.

2. Press POWER.

3. Press DRAIN & SPIN.

4. Press START.

When the spin is complete, the lid unlocks. Items can be removed from the washer.

These lights show which portion of the cycle the washer is operating. They also indicate when you can add other garments

to the wash load.

Turn the knob to choose the right wash cycle for the type of fabrics you are washing. When the knob points to a cycle, the indicator light for the cycle will glow. If the default settings for the Modifiers and Options are suitable for your wash load, you may press Start to begin the wash cycle.

C_sual i Express

Wrinkle Free Wash

Normal _ B@ky /

Heavy_ / _, / I - Sh_ts /

\ I

@n]

Clothes Clean Y[

Clothes Clean The Clothes Clean light stays on until the lid is opened or the

Power button is pressed.

Lid Lock

When the Lid Lock status light glows, the washer lid is locked. NOTE: You must wait until the Lid Lock light turns off before the

lid can be opened.

Indicator lights

An indicator light shows which Cycle, Modifiers and Options you have selected.

Estimated Time Remaining

Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an estimated time for drain and fill times, once Start is pressed.

NOTES:

• The time is an estimation only and may vary depending on load size, cycle, modifiers and options selected.

• You may notice the time adjusting during the cycle. This is normal.

• The cycle time may be extended if oversudsing occurs or the load is unbalanced.

Wflies Barks I

Whites Colors

Handwash

Preset Cycle Settings For ease of use, preset cycle settings provide the recommended

fabric care settings for each cycle. To use the preset cycle settings:

1. Press POWER.

2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed (see following chart).

3. Press START. The wash cycle will begin.

Preset Cycle Settings

Cycle Preset Soil Wash/Rinse

Minutes Level* Temp

Whitest Whites 79 Heavy Hot/Cold

(No ATC)

Heavy Duty 74 Heavy Hot/Cold

(No ATC)

Normal 43 Normal Warm/Cold

Casual/Wrinkle Free 44 Medium Warm/Cold

Light

Express Wash 34 Light Warm/Warm

Bulky/Bedding 46 Normal Warm/Cold

Sheets/Towels 46 Normal Warm/Cold

Darks/Colors 42 Normal Cool/Cold

Delicate/Nandwash 35 Light Cool/Cold

Rinse & Spin 20 Not Cold/Cold

applicable

Drain & Spin 10 Not Not

applicable applicable

Clean Washer 60 Not Not

applicable applicable

*Cycle time in minutes will appear in the display while you are

making selections. The total cycle time will appear, including an

estimated time for drain and fill times, once Start is pressed.

NOTE: Load only to the top of the basket. Overloading can cause poor cleaning. See "Starting Your Washer."

Whitest Whites

This cycle introduces liquid chlorine bleach to the load at the proper time for improved whitening of your heavily soiled white fabrics. Cycle combines high-speed wash action and high-speed spin. The default option setting for this cycle is 2nd Rinse to thoroughly remove detergent and bleach. For maximum soil and stain removal, liquid chlorine bleach should be used.

Heavy Duty

Use this cycle for heavily soiled cotton or sturdy items. Cycle combines high-speed wash action and high-speed spin. StainTreat is the default option for this cycle, but it may be turned off. See "Changing Cycles, Modifiers and Options."

Normal

Use this cycle for normally soiled cottons and mixed fabric loads. Cycle combines high-speed wash action and high-speed spin.

Casual/Wrinkle Free Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press and blends. This cycle uses medium-speed wash action, a medium- speed spin and a cool down process to reduce wrinkling.

Express Wash Use this cycle to wash a few lightly soiled items that are needed

in a hurry. This short cycle combines high-speed wash action and high-speed spin for the best cleaning and shortened dry times.

Bulky/Bedding

This cycle is designed for oversized items that do not easily absorb water, such as comforters, pillows and poly-filled jackets. This cycle gently washes these nonabsorbent items in a preset water level to avoid damage. This cycle starts with a soak to thoroughly saturate your large item. This is followed by medium wash action and medium spin speeds to maintain load balance.

NOTE: Due to the preset water level, using this cycle for items other than those described above will create an unbalanced load.

Sheets/Towels Use this cycle for sheets, pillowcases and towels. The wash

action of this cycle is designed to keep large items from tangling and bailing up.

IMPORTANT: For best performance, drop items in loose heaps evenly around the basket wall. Do not load items directly on the impeller for this cycle.

Darks/Colore

Use this cycle for dark or highly dyed natural fabrics such as

jeans or other cotton items that may be susceptible to dye loss.

This cycle uses low to medium-speed wash action and high- speed spin. For best results use cold or warm water.

Delicate/Handwash Use this cycle to wash lightly soiled special care garments or for

items labeled as "Machine Washable Wool or Silk." (Check label instructions to make sure that the garment is washable.) This cycle uses intermittent-low speed wash action and low-speed spin for the gentlest fabric care with less wrinkling.

Garments are labeled "Nandwash" because:

• The fiber construction may be sensitive to wash action.

• The fabric contains sensitive dyes that may bleed. NOTE: Some "Handwash" items naturally shrink when washed.

Keep this in mind when you purchase items labeled "Handwash." Items that shrink should be dried flat. When these items are still

wet, "block" them by gently stretching to the original measurements.

Rinse/Drain & Spin

The Rinse & Spin and Drain & Spin cycles are selected with the

same button.

Rinse/Drain & Spin

Rinse & Spin

This option performs a rinse only followed by a high-speed spin. The time display will include an estimate of how long it will take to

fill and drain the washer. When to use Rinse & Spin:

• For loads that need rinsing only. For completing a cycle after the power has been off.

use Rinse & Spin setting:

Press RINSE/DRAIN & SPIN button once. The Rinse & Spin indicator light, along with the Spin Speed, Water Temperature and 2nd Rinse lights will glow. You may change the Spin Speed and Water Temperature modifiers only.

NOTE: A Rinse & Spin cycle time of approximately 20 minutes will appear in the Estimated Time Remaining display.

2. Press START.

Drain & Spin

An extra drain and spin may help shorten drying times for some

heavy fabrics or special-care items. Drain & Spin may also be used for draining the washer after canceling a cycle or completing a cycle after a power failure.

To use Drain & Spin setting:

1. Press RINSE/DRAIN & SPIN button once. The Rinse & Spin indicator light, along with the Spin Speed, Water Temperature and 2nd Rinse lights will glow. You may change the Spin Speed modifier only.

2. Press 2nd RINSE to de-select Rinse & Spin. The 2nd Rinse and Water Temperature lights will shut off to indicate that a Drain & Spin cycle has been selected.

NOTE: A Drain & Spin time of approximately 10 minutes will appear in the Estimated Time Remaining display.

3= Press START.

IMPORTANT: Water will dispense in the washer for a moment, the lid will unlock, lock again, and then the Drain & Spin cycle will continue. This is normal.

Clean Washer Use the Clean Washer cycle once a month to keep the inside of

your washer fresh and clean. This cycle uses a higher water level

in combination with liquid chlorine bleach to thoroughly clean the inside of your washing machine. See "Cleaning Your Washer."

Clean Washer

_SE _LEACH ONLY

IMPORTANT: Do not add detergent to this cleaning cycle. Use only liquid chlorine bleach. Do not place garments or other items in the washer during the Clean Washer cycle. Use this cycle with an empty wash tub.

Modifiers allow you to further customize your cycles and save energy.

Soil Level (Wash Time) Soil level is preset for each cycle. See "Preset Cycle Settings" in

"Cycles." As you press the Soil Level pad, the cycle time (minutes) will increase or decrease in the Estimated Time Remaining display. To get the minimum wash time, press the pad

until the indicator light next to Light illuminates. This is the shortest wash time available for that cycle.

Temperature Guide

Wash Water Temperature Suggested Fabrics

Hot Whites and pastels

Warm Bright colors

Cold Darker colors that bleed or

fade

))

Mid I (>8vy

))

_ir'dIqh

))

Lit_l/

So)

L_we)

t@_LsTs

• For most loads, use the time recommended in the preset cycle settings.

• For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.

• For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.

Spin Speed

This washer automatically selects the spin speed based on the cycle selected. The preset speeds can be changed. Spin speeds

may vary by cycle.

High

Medium

Low

No Spin

NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control Auto Temp Control (ATC) electronically senses and maintains a

uniform wash and rinse water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On when a cycle is selected. (See "Preset Cycle Settings" in "Cycles.")

ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water temperature in the Hot/Cold and Cold/Cold settings depend on the water temperature at the water inlet

faucets.

• ATC ensures consistent cleaning.

• Heated water consumes the largest amount of energy that a washer uses.

• Today's detergents work well at temperatures above 60°F (15.6°C).

Delay Start You can use the Delay Start feature to delay the start of a wash

cycle for up to 13 hours (depending on your model).

1. Load the washer and fill the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modifiers and Options.

5. Press DELAY START. 1H (one hour) will be displayed in the time display window. The indicator light for Delay Start will

flash.

Spin

Sped

Wash/Rinse Temp Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads drier and more comfortable to handle. However, warm rinses may increase wrinkling. Cold

rinses may help with wrinkling and save energy.

_0t {'<,d

<_d/Co

(}<f Q:}d

D44y Start

For a longer delay time, press Delay Start. The Start time will increase by 1-hour steps.

Press START. The countdown to the wash cycle will show in the time display window, and the Delay Start indicator light will glow.

NOTE: You must press Start to initiate a countdown for the cycle to begin.

To change the Delay Start time:

• Press STOR

• Press DELAY START to select the desired delay time.

• Press START to begin the countdown.

To cancel Delay Start:

Press START again to begin the cycle right away, or press STOP twice to cancel the cycle.

Use these pads to select the desired options for your wash cycle.

Op__O_S

i!}ave _-_:_gyPlus

Starl Treat

Save Energy Plus

The Save Energy Plus option reduces wash and rinse water temperatures to save energy while adding about 5 minutes of wash time to maintain performance. This option must be selected prior to the start of the cycle. The Save Energy Plus option is available in only the Heavy Duty and Whitest Whites cycles.

2nd Rinse

A 2nd rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the first rinse. This is the default rinse setting for the Whitest Whites cycle. Fabric softener will be dispensed during the 2nd Rinse.

Stain Treat (Catalyst _ Cleaning Action) This option provides enhanced cleaning action for tough stains.

The Heavy Duty cycle automatically includes Stain Treat. Choosing Stain Treat will add approximately 5 minutes to a cycle. Stain Treat should be started on a dry load only and should not be selected after the tub has started filling with water.

Stain Treat may be selected as an option with other cycles. See table for details.

Cycle Stain Treat

(Adds time to the wash cycle)

When Auto Soak is selected, the washer saturates the load with water and detergent then pauses to allow the detergent to work on soils. The pause is followed by a slow-speed spin. The washer pauses and spins six times before advancing to the desired wash cycle. Auto Soak adds approximately 12 minutes to the wash cycle.

When Prewash is selected, the washer fills to the desired water level. It then alternates between 1 minute of wash

action and a 1-minute pause period three consecutive times with an extended pause to end the cycle. When Prewash is complete, the washer advances to the selected wash cycle. The Prewash option extends your wash time by approximately 11 minutes.

Cycle Signal Volume

The End of Cycle Signal produces an audible sound when the

wash cycle is finished. This signal is helpful when you are removing items from the washer as soon as it stops. Select Loud or Soft. The End of Cycle Signal is off when neither option is lit.

Start Press START to start your washer after a cycle has been

selected. Be sure all desired Modifiers and Options have been selected. The lid must be closed for the washer to start.

Stop Press STOP once to pause or stop the washer at any time. Press

START to continue the cycle. Press STOP twice to turn off the washer. Press STOP once to unlock the lid and add a garment.

Power

Press POWER to turn the washer on or off. The washer shuts off automatically after 5 minutes following the completion of a cycle.

Whitest Whites Option

Heavy Duty Default

Normal Option

Casual/Wrinkle Free Option

Express Wash Option

Bulky/Bedding Not available

Sheets/Towels Not available

Darks/Oolors Option

Delicate/Nandwash Option

Auto Soak/Prewash

Use these options for set-in stains and soils that need extra time for removal. Press the Option button for Auto SoaWPrewash until your desired choice is lighted.

Your new washer may make sounds your old one didn't. Because the sounds might be unfamiliar, you may be concerned about them. These sounds may be normal.

During washing

If you select the Stain Treat option, you will hear a spin/spray

noise at the start of the cycle.

During drain

If water is drained quickly from your washer (depending on your

installation), you may hear air being pulled through the pump

during the end of draining.

During wash and spin This washer does not have a transmission. The motor provides

direct drive for wash and spin. You will hear sounds that are

different from those of a conventional washer.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

• Always use High Efficiency (HE) detergent, The package for this type of detergent will be marked "HE" or "High Efficiency." This wash system, along with less water, will create too much sudsing with a regular non-HE detergent, Using regular detergent will likely result in washer errors, longer cycle times and reduced rinsing performance, It may also result in component failures and noticeable mold or mildew. HE detergents such as TIDE ®HE are made to produce the right amount of suds for the best performance. Follow the detergent manufacturer's instructions to determine the amount of detergent to use.

• Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best results.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, synthetics, permanent press). When possible, turn lint-givers inside-out.

• Separate dark colors from light colors, colorfast items from noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate items).

• Separate bulky, nonabsorbent items such as comforters, pillows and poly-filled jackets. Use the Bulky/Bedding cycle

for these items. Separate sheets, pillowcases and towels and use the

Sheets/Towels cycle for these items. For best performance, drop items in loose heaps evenly around the basket wall and do not load items directly on the impeller for this cycle.

Unloading

• Remove clothes from washer after the cycle is completed. Metal objects such as zippers, snaps, and buckles may rust if left in the washer basket for a long time.

WASHER CARE

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes in combination with liquid chlorine bleach to thoroughly clean the

inside of the washing machine. NOTES:

• Read these instructions completely before beginning the cleaning process,

It is recommended that you allow the cleanout cycle to complete without interruptions. If necessary, the cleanout

cycle may be interrupted by pressing the Power button once or the Stop button twice.

IMPORTANT: If the cleanout cycle is interrupted, run a Rinse & Spin cycle to ensure that all remaining bleach is rinsed from the washer.

Begin procedure

1. Open the washer lid and remove any items from the washer.

2. Add liquid chlorine bleach to the bleach dispenser.

• Add 1 cup (236.6 mL) liquid chlorine bleach to the bleach

dispenser. NOTE: Do not add any detergent to this cleaning cycle.

Use of more than 1 cup (236.6 mL) of bleach will cause product damage over time.

3. Close the lid.

4. Press POWER.

5. Press CLEAN WASHER.

• The Estimated Time Remaining display will show approximately 60 minutes.

6= Press START.

The cycle will begin and water will dispense in the washer for a moment and pause, then the lid will lock and the cycle will

continue.

• Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle time will appear on the display.

• If the procedure does not sufficiently improve the machine freshness, evaluate your installation and usage conditions for

other causes.

Always do the following to maintain washer freshness

• Use only High Efficiency (HE) detergent.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to keep it looking

new, Use mild soap and water. Do not use abrasive products.

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

To winterize washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

5. Unplug washer or disconnect power.

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Emectrica[ Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or emectrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through the Bulky/Bedding cycle without clothes, using 1/2the normal recommended amount of detergent to clean out the antifreeze.

To transport the washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. If the washer will be moved during freezing weather, put 1 qt (1 L) of R.V.-type antifreeze in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

4. Disconnect the drain from the drain system.

5. Unplug the power cord.

6. Place the inlet hoses into the basket.

7. Drape the power cord and drain hose over edge into the basket.

8. Place foam packing ring from the original shipping materials in the top of washer. If you do not have the original foam packing ring, place heavy blankets, towels, etc. into basket opening. Close the lid and put apiece of tape over the lid and

down to the front of the washer.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and

connect the washer.

2. Run the washer through the Bulky/Bedding cycle without clothes, using 1/2the normal recommended amount of detergent to clean out the antifreeze, if used.

TROUBLESHOOTING

Firsttry the solutions suggested here and possibly avoid the cost of a service call...

_i,_ii[_;i!!!iiS!i%!_!_ii__¸_i!iii):i_ih_:iiii!i_iiiiiiiiiiO;iili _)ii!:%:_:i;_z_jj¢_!:!i_f_iiilS_

Washer displaying code messages

• LF "LF" (Washer is taking too long to fill) Check the following: •

Are the water inlet hoses kinked or clogged? Are the water inlet valve screens clear?

Press STOP to clear display.

• _d "Ld" (Washer is taking too long to drain water from

the wash tub)

Check the following: Is the drain hose kinked or clogged? •

Is the drain hose installed properly? See "Connect the Drain Hose." Press STOP to clear display.

• UL (Unbalanced Load)

• _3L "oL" (Over Load) •

• _d "Sd" (Suds Detected)

"uL"

If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the •

end of the wash cycle and before the final spin. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, open lid and redistribute the load. Close lid and press START.

Is the washer overloaded? The washer has attempted to fill and begin the wash cycle. Ifthe washer is overloaded, it will drain any water and detergent that was added during the fill. To correct the overload, remove several items and add • detergent. Close lid and press START.

Did you use regular detergent?

Regular or hand-washing detergents are not recommended for this washer. Use only High Efficiency ("HE") detergent. •

Did you add too much detergent? Always measure detergent. Follow detergent manufacturer's

directions. If excessive suds are detected, the washer will display this

code while running a suds reduction correction routine at the end of the wash cycle. The suds reduction routine removes extra suds and assures proper rinsing of your garments. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, re-select your desired cycle using cold water. Press START. Do not add detergent.

_d "lid" (Lid Opened) Is the lid open? Close the lid to clear the display. If the lid remains open for more than 10 minutes, water in the wash

tub will drain. H_ "HC" (Cold and Hot hoses switched)

This code will appear at the end of the wash cycle to indicate that the cold and hot water inlet hoses are switched. See

"Connect the Inlet Hoses." _L "dL" (Door/Lid cannot lock)

Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press STOP once to clear the code.

dU "dU" (Door/Lid cannot unlock)

Is there excessive weight on the lid, such as a basket of laundry? Excessive weight will keep the lid from unlocking.

Press STOP once to clear the code.

F_= "F##" code Press STOP once to clear code. Press START. If code appears again, call for service.

Noisy, vibrating, off-balance

Is the washer level? Does the washer rock when pushed against the corners?

The washer must be level. The front and rear feet must be in firm contact with the floor. Check that the Iocknuts are

tightened. See "Level the Washer." Is the floor flexing, sagging or not level?

Flooring that flexes or is uneven can contribute to noise and vibration of the washer. A 3/4"(1.9 cm) piece of plywood under

the washer will reduce the sounds. See "Location Requirements."

Is the load balanced? Evenly distribute the load in the washer basket and make

sure the height of the load does not exceed the top row of basket holes. See "Starting Your Washer."

Do you hear clicking or other noises when the cycle changes from washing to draining or spinning?

When the drive system shifts or the washer basket settles between cycles you may hear noises that are different from your previous washer. These are normal washer noises.

Is the washer gurgling or humming?

When the washer drains, the pump will make a continuous humming with periodic gurgling or surging sounds as the final

amounts of water are removed. This is normal. Are you washing a small load?

You will hear more splashing sounds when washing small loads. This is normal.

The washer basket moves while washing.

This is normal. Can you hear water spraying? This is part of the wash

action.

Are you washing items with metal snaps, buckles or zippers?

You may hear metal items touching the basket. This is normal. Did you select the Bulky/Bedding cycle?

Use the Bulky/Bedding cycle only for oversized, nonabsorbent items such as comforters, pillows or poly-filled jackets. Other items will create an unbalanced load in this cycle.

Washer leaks

• Are the fill hoses tight?

• Are the fill hose washers properly seated? Chock both ends of each hose. See "Connect tho Inlet

Hoses."

Did you pull the drain hose from the washer cabinet and install it in a standpipe or laundry tub?

The drain hose should be pulled from the washer cabinet and secured to the drainpipe or laundry tub. See "Connect Drain

Hose" and "Secure the Drain Hose." Is the sink or drain clogged?

Sink and drainpipe must be able to carry away 17 gal. (64 L) of water per minute. If sink or drainpipe is clogged or slow,

water can back up out of drainpipe or sink. Is water splashing off the tub ring or the load?

The wash load should be balanced and not overloaded. If the wash load is unbalanced or overloaded, incoming water can

deflect off the load.

• Is thewasher properly installed? The washer must be level. The feet should be properly installed and the nuts tightened. See "Level the Washer."

Was the cycle interrupted and then the Stain Treat option

selected?

The Stain Treat option should be started on a dry load only. The Stain Treat option should not be selected after the tub

has started filling with water.

Did you select Stain Treat option and use a hand-washing detergent?

Regular or hand-washing detergents are not recommended for this washer. Use only High Efficiency ("HE") detergent.

• Check household plumbing (laundry tubs, faucets, drainpipe, water pipes) for leaks.

Dispenser operation

• Are the laundry additives in the correct dispensers? Add the correct amounts of detergent (powdered or liquid), •

liquid chlorine bleach, or fabric softener to the correct dispenser. You can add powdered or liquid color-safe bleach

to the detergent dispenser. Be sure to match powdered color-safe bleach with powdered detergent or match liquid

color-safe bleach with liquid detergent. Use only liquid chlorine bleach in the bleach dispenser.

• Is there water remaining in the bottom of a dispenser?. • Did the dispenser drain properly?

A small amount of water may be left in a dispenser at the end of the cycle. This is normal.

E_ectrica_ Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or e_ectrical shock.

Washer won't fill, rinse or agitate; washer stops

• Is the power cord plugged into a grounded 3 prong

outlet?

Plug power cord into a grounded 3 prong outlet.

• Are you using an extension cord? Do not use an extension cord.

• Is there power at the plug? Check electrical source or call electrician.

• Is the indicator on the Cycle control knob properly lined up with a cycle? Turn the Cycle control knob to the right slightly.

Are the water inlet valve screens clogged? Turn off the water and remove inlet hoses from the washer.

Remove any accumulated film or particles. Reinstall hoses, turn on water and check for leaks.

• Are the hot and cold water faucets turned on? Turn on the water.

• Is the water inlet hose kinked? Straighten the hoses.

Does the water level seem too low, or does the washer appear to not fill completely?

The Auto Water Level feature senses the size of the load and adds the correct amount of water for the load size. You may

notice during a cycle that the wash load is not completely submerged in water. This is normal and necessary for clothes

to move.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. Ifthe problem continues, call an electrician.

• Is the washer in a normal pause in the cycle? The washer may pause during certain cycles. Allow the cycle

to continue.

• Is thewasher overloaded? Wash smaller loads. See "Starting Your Washer" for

maximum load size.

Is there oversudsing? Cancel the current cycle. Press RINSE/DRAIN & SPIN to drain the load. Re-select your desired cycle and press START. Do not add detergent. Use cold water.

Is the lid open? The lid must be closed during operation. The washer will not operate with the lid open.

Did you add more items to the load once the washer started?

Once the load is wet, there may appear to be space for more items. Do not add more than 1 or 2 garments after the cycle has started. For best results determine load size with dry items only.

Washer continues to fill or drain, or the cycle seems

stuck

Does the wash water temperature feel lower than usual?

As washing progresses, the wash temperature will decrease slightly for hot and warm washes. This is normal.

To reduce wrinkling, the warm rinse is regulated to be cooler than the warm wash.

Excessive sudsing

• Did you use a non-HE detergent? Regular or hand-washing detergents are not recommended

for this washer. Use only High Efficiency ("HE") detergent.

Is the top of drain hose lower than the control knobs on washer?

The top of the drain hose must be at least 39" (99 cm) above the floor. See "Drain System."

Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe?

The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See

"Installation Instructions."

Washer won't drain or spin; water remains in washer

• Is the drain hose clogged, or the end of the drain hose

more than 96" (244 cm) above the floor?

See "Drain System." Is the lid open?

The lid must be closed during operation. The washer will not operate with the lid open.

Is there excessive sudsing? Always measure detergent. Follow detergent manufacturer's

directions. Ifyou have very soft water, you may need to use less detergent. Use only High Efficiency ("HE") detergent.

Wash/Rinse temperature

Are the hot and cold water inlet hoses reversed?

If the hot and cold water inlet hoses are reversed, the washer will display an "HC" error code at the end of the cycle. See

"Connect the Inlet Hoses."

Are you washing many loads?

As your frequency of loads washed increases, the water temperature may decrease for hot and warm temperatures.

This is normal.

Did you select Save Energy Plus?

The Save Energy Plus option reduces wash and rinse water temperatures to save energy. This option must be selected prior to the start of the cycle. Save Energy Plus is only available in the Heavy Duty and Whitest Whites cycles.

• Do you have an ENERGY STAR washer? The wash water temperatures may feel cooler to you than those of your previous washer. This is normal.

Is there excessive sudsing? Always measure detergent. Follow detergent manufacturer's directions. Ifyou have very soft water, you might need to use less detergent.

Was the cycle interrupted and then the Stain Treat option

selected?

The Stain Treat option should be started on a dry load only. The Stain Treat option should not be selected after the tub

has started filling with water.

Cycle did not run Stain Treat option

Did you select the Stain Treat option?

The Stain Treat option must be selected for it to be included in a wash cycle. The Stain Treat option should be started on a dry load only. Stain Treat should not be selected after the tub has started filling with water.

• The Stain Treat option is a default in the Heavy Duty cycle and may be added to other cycles.

Load too wet

• Did you use the right cycle for the load being washed? Select a higher spin speed.

• Did you use a cold rinse? Cold rinses leave loads wetter than warm rinses. This is normal.

Did you wash an extra large load? A large unbalanced load could result in a reduced spin speed and wet clothes at the end of the cycle. Evenly distribute the load and make sure the height of the load does not exceed the top row of basket holes.

Residue or lint on load

• Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.

• Did you sort properly? Sort lint givers (towels, chenille) from lint takers (corduroy, synthetics). Also sort by color.

ili!

+ 53 hidden pages

Kenmore Elite 110.2708, Elite 110.2709, Elite 110.2706, Elite 110.2707 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual