Kenmore 79036939904, 79036939903, 79036939902, 79036939901, 79036939900 Owner’s Manual

...
Models, Modelos 790.3693.-.',..
.,. = Color number, nOmero de color
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
P/N 318205855 Rev. B (0908)
Table of Contents
Slide-in Range Warranty .................................................. 2
Product Record ................................................................. 2
IMPORTANT SAFETY iNSTRUCTIONS ....................... 3-5
Grounding instructions .................................................... 6
Conversion to Liquefied Petroleum Gas (or L.P. Gas)... 6
Range Features ................................................................. 7
Before Setting Surface Controls ..................................... 8
Setting Surface Controls ................................................. 9
Setting Oven Controls ............................................... 13=18
Self=Cleaning .............................................................. 19=20
General Cleaning ....................................................... 21=24
Before You Call ........................................................... 25=26
Kenmore Warranty
When installed, operated and maintained according to all instructions supplied withthe product, ifthis appliance fails due to a defect in material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair.
This warranty applies for only 90 days from the date of purchase if this appliance is ever used for other than private family purposes.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. Cracks in a ceramic glass cooktop that are not a result of thermal shock.
2. Stains and scratches on a ceramic glass cooktop resulting from accident or improper operation or maintenance.
3. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
4. A service technician to instruct the user in correct product installation, operation or maintenance.
5. A service technician to clean or maintain this product.
6. Damage to or failure of this product if it is not installed, operated or maintained according to the all instructions supplied with the product.
7. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
8. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.
9. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States or Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
Product Record
In this space below, record the date of purchase, model and serial number of
your product. You will find the model and serial number printed on the serial plate.
Model No. 790. Serial No. Date of purchase
Save these instructions and your sales receipt for future reference.
Please carefully read and save these instructions
This Use & Care Manual contains general operating instructions for your appliance and feature information for several models. Your product may not have all the described features, The graphics shown are representative. The graphics on your appliance may not look exactly like those shown. Common sense and caution must be practiced when installing, operating and maintaining any appliance.
Printed in United States
Serial Plate Location
You will find the model and serial
number printed on the serial plate. The serial plate is located as shown below.
Remember to record the serial number
for future reference.
Serial Plate
Location
important Safety instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
This symbol will help alert you to situations that may cause serious bodily harm, death or
property damage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
if the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death. FOR YOUR SAFETY:
-- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
-- WHATTO DO IFYOU SMELL GAS:
,, Do not try to light any appliance. ,, Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
,, if you cannot reach your gas supplier, call the fire
department.
-- installation and service must be performed by a qualified installer, servicer or the gas supplier.
All ranges can tip.
Injury to persons could result.
Install anti-tip device packed with range.
See installation instructions. _To reduce the risk of
tipping, the range must be secured by properly installed anti=tip
(s) provided with the
range. To check if the bracket(s)
is installed properly, remove the lower panel or storage drawer and verify that the anti-tip bracket(s) is engaged. Refer to the Installation instructions for proper anti-tip
bracket(s) installation.
iii,,,,,,,,,,¸......
....."Iii.......
,, Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.
,, Proper Installation=Be sure your appliance is
properly installed and grounded by a qualified technician in accordance with the National
Fuel Gas Code ANSI Z223.1 latest edition, and National Electrical Code ANSI/NFPA No. 70 latest
edition, and local code requirements. Install only per installation instructions provided in the literature package for this range.
Sears Parts & Repair is the recommended repair service for this appliance. Know how to disconnect the electrical power to the appliance at the circuit breaker or fuse box in case of an emergency.
,, User servicing--Do not repair or replace any part of
the appliance unless specifically recommended in the manuals. All other servicing should be done only by a qualified technician, This may reduce the risk of personal injury and damage to the range.
,, Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti=tip brackets/screws, or any other part of the product.
Stepping, leaning or sitting on the door
or drawer of this range can result in serious injuries and also cause damage to the range. Do not allow children to climb or play around the range. The weight of a child on an open door may cause the range to tip, resulting
in serious burns or other injury.
Do not use the oven or warmer drawer (if
equipped) for storage.
Do not store items of interest to children in the cabinets above a range. Children climbing on the range to reach items could be seriously injured.
NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
Storage in or on Appliance--Flammable materials should not be stored in an oven, near surface burners or in the drawer (if equipped). This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance. Flammable materials may explode and result in fire or property damage.
Do not leave children alone--Children should not be left alone or unattended in the area where appliance
is in use. They should never be allowed to sit or stand on any part of the appliance.
important Safety instructions
DO NOTTOUCH SURFACE BURNERS, AREAS NEAR THESE BURNERS, OVEN BURNERS OR INTERIOR
SURFACES OF THE OVEN. Both surface burners and oven burners may be hot even though flames are not
visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cooktop, surfaces facing the cooktop, the oven vent openings and surfaces near these openings, oven door and window.
Wear proper appareIRLoose=fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable
materials contact hot surfaces.
Do not use water or flour on grease fires--Smother the fire with a pan lid, or use baking soda, a dry chemical or foam=type extinguisher.
When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
In case of fire or gas leak, be sure to turn
off the main gas shutoff valve.
Use only dry potholders--Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot heating burners. Do not use a towel or other bulky cloth instead of a potholder.
Do not heat unopened food containers--Buildup of pressure may cause container to burst and result in injury.
Remove the oven door from any unused range if it is to be stored or discarded.
IMPORTANT--Do not attempt to operate the oven during a power failure. If the power fails, always turn off the oven. If the oven is not turned off and the power resumes, the oven may begin to operate again. Once the power resumes, reset the clock and oven function.
IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP
Use proper flame size--Adjust flame size
so itdoes not extend beyond the edge of the utensil. The use of undersized utensils will expose a portion of the burner flame to direct contact and may result inignition of clothing. Proper relationship of utensil to flame will also improve efficiency.
Do not use stove top grills on the burner
grates of sealed gas burners. If you use a stove top grill on a sealed gas burner, it will cause incomplete combustion and can result in exposure to carbon monoxide levels
above allowable current standards. This can be hazardous to your health.
Know which knob controls each surface burner. Place a pan of food on the burner before turning it on,
and turn the burner off before removing the pan.
Always turn the knob to the full LITE position when igniting top burners. Visually check that burner has lit. Then adjust the flame so it does not extend beyond the edge of the utensil.
Use proper pan size. This appliance is equipped with one or more surface burners of different sizes. Select
utensils having flat bottoms large enough to cover the surface burner. The use of undersized utensils will
expose a portion of the surface burner to direct contact and may result in ignition of clothing. Proper relationship of utensil to the surface burner will also improve efficiency.
Utensil handles should be turned inward and not extend over adjacent surface burners. To reduce
the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned so that it is turned inward, and does not extend to adjacent surface
burners. Never leave surface burners unattended at high
heat settings--Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.
Protective liners--Do not use aluminum foil to line surface burner pans, or oven bottom, except as
suggested in this manual. Improper installation of these liners may result in risk of electric shock, or fire.
Glazed cooking utensils--Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for rangetop service without breaking due to the sudden change in temperature. Check the manufacturer's recommendations for cooktop
use. Do not use Searing Grill on the cooktop. The searing
grill is not designed for use on the cooktop. Doing so may result in a fire.
Do not use decorative surface burner covers. If a burner is accidentally turned on, the decorative cover
will become hot and possibly melt. Burns will occur ifthe hot covers are touched. Damage may also be done to the cooktop or burners because the covers may cause overheating. Air will be blocked from the burner and cause combustion problems.
important Safety instructions
iMPORTANT iNSTRUCTiONS FOR USING YOUR OVEN
Use care when opening oven door or warmer drawer
(if equipped)--Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven/
warmer drawer.
Keep oven vent ducts unobstructed. The oven vent is located at the center rear of the cooktop. Touching the surfaces in this area when the oven is operating may cause severe burns. Also, do not place plastic or heat-
sensitive items on or near the oven vent. These items could melt or ignite.
NEVER cover any slots, holes or
passages in the oven bottom or cover an entire rack materials such as aluminum foil. Doing so blocks air
flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may trap heat, causing a
fire hazard.
Placement of oven/warmer drawer (if equipped) racks. Always place oven racks in desired location while oven/warmer drawer (if equipped) is cool. If rack
must be moved while oven is hot use extreme caution. Use potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating elements in the oven/warmer drawer (if equipped).
Remove all utensils from the rack before moving.
Do not use the broiler pan without its insert. The broiler pan and its insert allow dripping fat to drain and be kept away from the high heat of the broiler.
Do not cover the broiler insert with aluminum foil, Exposed fat and grease could ignite.
Do not touch a hot light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or turn off the power to the appliance before removing and replacing light bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
Clean the range regularly to keep all parts free of
grease that could catch fire, Exhaust fan ventilation hoods and grease filters should be kept clean. Do not allow grease to accumulate on hood or filter. Greasy deposits in the fan could catch fire. When you are flaming food under the hood, turn the fan on. Refer to the hood manufacturer's instructions for cleaning.
SELF-CLEANING OVENS
In the self-Cleaning cycle only clean the parts listed in this Use and Care Guide. Before self-cleaning the oven, remove the broiler pan and any utensils or foods
from the oven.
Do not use oven cleaners--No commercial oven cleaner or oven liner protective coating of any kind should
be used in or around any part of the oven.
Do not clean door gasketiThe door gasket is essential for a good seal. Care should be taken not to rub, damage :::'
or move the gasket. _::::/
Remove oven racks. Oven racks color will change if left :"":::::: in the oven during a self-cleaning cycle.
_The health of some birds is extremely sensitive to the fumes given off during the self- cleaning cycle of the range. Move the birds to another
well ventilated room.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a
list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to such substances.
SAVETHESE SAFETY I STRUCTI
Grounding instructions
For personal safety, the cooktop must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for complete installation and grounding instructions.
_This appliance is equipped with a 3-prong grounding plug foryour protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.
Grounding type wall
rece
shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong
from electrical power cord. Failure to follow this
warning can cause serious injury, fire or death.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
Power supply
cord with 3-prong
grounding plug
Avoid fire hazard or electrical
This natural gas range is designed to allow for conversion to Liquefied Petroleum (L.R) Gas.
Only a qualified service agent should perform the L. R conversion. Contact the local gas provider for conversion. The L. R Conversion Kit is supplied with this range and is located on the main back of the range. The kit contains
installation instructions which must be read before and followed carefully when installing the kit.
Personal injury or death from electrical shock
may occur if the range is not installed by a qualified installer or electrician.
To avoid serious injury, any additions,
changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified service agent.
Range
Features
Your Range
Features At a Glance
Self-Cleaning Oven
Removable Surface
Burner Grates (Styles and color will vary by model)
Electronic Oven Controls with Clock and Kitchen
Timer
Surface Burner Control Knobs
Oven Light
(2) Adjustable Oven Racks
Oven Door Handle
¸121111
iii,,,,,,,,,,¸......
....."Iii.......
Storage Drawer
12,200 BTU
Sealed Burner (LP convertible)
Glass Front Oven Door with Large
Window Opening
Oven Vent
5,OOOBTU Sealed Burner
(LP convertible)
14,200 BTU
Sealed Burner
(LP convertible)
NOTE: Features shown for your
appliance may vary with model type and color,
9,5OOBTU Sealed Burner
(LP convertible)
Porcelain Cook Top
Before Setting Surface Controls
Assembly of the Surface Burner Heads, Burner Caps and Burner Grates
It is very important to make sure that all of the Surface Burner Heads, Surface Burner Caps and Surface Burner Grates are installed correctly and at the correct locations.
1. Remove all packing tape from cooktop area. Remove all Burner Caps and Burner Heads.
2. Discard all packing material located under Burner Heads (if applicable).
3. To replace the Burner Heads & Caps, match the letters located under center of Burner Caps with the letters located inside Burner Heads (Figure 1).
4. Match Burner Skirts with Burner Heads and Burner Caps (see Figure 1). Replace the Burner Heads and
Caps on cooktop (see Figure 2). Carefully align the Electrodes into slot or hole of each Burner Head
(Figure 3).Note: The Burner Heads should sit flat on Cooktop Burner Skirts.
5. Place the removable oven vent cover over the fixed oven vent cover.
6. Unpack Burner Grates and position on the cooktop.
REMEMBER -- DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL
TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place
whenever the surface burners are in use.
B BUper
Figure 1
Burner Skirt
_12.2K T
P
Figure 2
_ectrodes must
Figure 3 align into slot or hole for each
Burner Head
5K1
H4.2K
Figure 4
Control Locations of the Gas Surface
Burners
Your range is equipped with gas surface burners with different BTU ratings. The ability to heat food quicker and in larger volumes increases as the burner size
increases,
The small SIMMER burner is best used for simmering delicate sauces, etc. This burner is located at the right
rear burner position on the cooktop (see Figure 4).
The STANDARD burner can be used for most surface cooking needs. The standard burner is located at the
left front position on the cooktop (see Figure 4).
The POWER burners are best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. The POWER burners are located at the right front and left rear burner positions on the cooktop (see Figure 4).
Regardless of size, always select cookware that
is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.
Setting Surface Controls
Do not place plastic
items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite.
Potholders, towels or wood spoons could catch fire if placed too close to a flame.
in the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the
surface control knob to LITE. After burner lights push in and turn knob to desired
setting. Use caution when lighting surface burners manually.
Operating the Gas Surface Controls:
1. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of the OFF position (See Figure 1).
3. Release the knob and rotate to the LITE position (Figure 2). Note: All four electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite.
4. Visually check that the burner has a flame.
5. Turn the control knob counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the knob
indicator settings to adjust the flame as needed. DO NOT cook with the surface control knob in the LITE position. (The electronic ignitor will continue to spark if the knob is left in the LITE position.)
Setting Proper Surface Burner Flame Size
For most cooking, start on the highest control setting and then turn to a lower one to complete the process. Use the recommendations below as a guide for determining proper flame size for various types of cooking. The size and type of utensil used and the amount of food being cooked will influence the setting needed for cooking.
High Flame Start most foods; bring water to a boil; pan broiling. Medium Flame Maintain a slow broil; thicken sauces, gravies; steaming.
Figure 1
Figure 2
Low Flame Keep foods cooking; poach; stewing.
*These settings are based on using medium=weight metal or aluminum pans with lids. Settings may vary when using other types of pans. The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharp. Adjust or clean burner if flame is yellow-orange.
Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer
edge of the pan.
For deep fat frying, use a thermometer and adjust the surface control
knob accordingly. Ifthe fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly.
Proper
flame size
Figure 3
Improper flame size
Loading...
+ 19 hidden pages