Gas Range
Slide-in models
iii , ,
....: _: !ill :L_:_.!: ,::!:
Estufa de as
Modelos deslizables
Models, Modelos 790.3673>':
.,. = Color number, nQmero de color
®
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www, sears,com
P/N 318203881 Rev. A (0707)
Table of Contents
Slide=in RangeWarranty .................................................. 2
Product Record ................................................................ 2
IMPORTANT SAFETY iNSTRUCTiONS ......................... 3-5
Protection Agreements .................................................... 6
Grounding instructions ................................................... 7
Conversion to Liquified Petroleum Gas (or L.P. Gas) .... 7
Range Features ................................................................ 8
Before Setting Surface Controls ...................................... 9
Setting Surface Controls ............................................... 10
Surface Cooking ............................................................. 11
Before Setting Oven Controls ........................................ 12
Control Pad Functions ................................................... 13
Setting Oven Controls ............................................... 14-19
Self=Cleaning .............................................................. 20-21
General Cleaning ....................................................... 22-25
BeforeYou Call ........................................................... 26-27
Sears Service ................................................................. 28
Kenrnore Appliance Warranty
OneYear Limited Warranty
When installed, operated and maintained according to all instructionssupplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date of purchase, call 1=800=4=MY=HOME®to arrange for free
repair, if this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of
purchase.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instructthe user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it isnot installed, operated or maintained according to all instructionssupplied with
the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than itsintended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, includingwarranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest
period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not
allow the exclusion or limitationof incidental or consequential damages, or limitations on the duration of impliedwarranties
of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used inthe United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Sears Canada Inc.,Toronto, Ontario, Canada M5B 2B8
Product Record Serial Plate Location
In this space below, record the date of purchase, model and serial number of your You will find the model and serial
product. You will find the model and serial number printed on the serial plate.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.
Please carefully read and save these instructions
This Use & Care Manual contains general operating instructions for your appliance
and feature information for several models. Your product may not have all the
described features. The graphics shown are representative.The graphics on your
appliance may not look exactly like those shown. Common sense and caution must
be practiced when installing,operating and maintaining any appliance.
Printed in United States 2
number printed on the serial plate. The
serial plate is located as shown below.
Remember to record the serial number
for future reference.
Location
important Safety instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains importantsafety symbols and instructions.Please pay attention to these symbols and
follow all instructions given.
This symbol will help alert you to situations that may cause serious bodily harm, death or
propertydamage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
if the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
FOR YOUR SAFETY:
-- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
-- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
= Do not touch any electrical switch; do not use any
phone in your building.
= immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• if you cannot reach your gas supplier, call the fire
department.
-- installation and service must be performed by a
qualified installer, servicer or the gas supplier.
• All ranges can tip.
• injury to persons could result.
• Install anti-tip device packed with range.
= Seelnstallationlnstructions.
To reduce the risk of
tipping, the range must be secured
by properly installed anti-tip
bracket(s) provided with the range.
To check if the bracket(s) is
installed properly, remove the
lower panel or storage drawer and
verify that the anti-tip bracket(s) is
engaged. Refer to the Installation
instructions for proper anti-tip
bracket(s) installation.
• Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
• Proper Installation-Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance with the National Fuel Gas
Code ANSi Z223.1 latest edition, and National
Electrical Code ANSI/NFPA No. 70 latest edition, and
local code requirements, install only per installation
instructionsprovided in the literature package for this
range.
Sears Parts & Repair isthe recommended repair service
for this appliance. Know how to disconnect the electrical
power to the appliance at the circuit breaker or fuse box in
case of an emergency.
= User servicing--Do not repair or replace any part of
the appliance unless specifically recommended in the
manuals. Allother servicing should be done only by a
qualified technician, This may reduce the risk of personal
injuryand damage to the range.
• Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.
children to climb or play around the range. The weight of a
child on an open door may cause the range to tip, resulting
in serious burns or other injury.
Do not use the oven or warmer drawer (if
equipped) for storage.
Do not store items of interest to children
in the cabinets above a range. Children climbing on the
range to reach items could be seriously injured.
NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
= Storage in or on Appliance--Flammable materialsshould
not be stored in an oven, near surface burners or in the
drawer (if equipped). This includespaper, plastic and cloth
items, such as cookbooks, plasticware and towels, as well as
flammable liquids. Do not store explosives, such as aerosol
cans, on or near the appliance. Flammable materials may
explode and result infire or property damage.
• Do not leave children alone--Children should not be
left alone or unattended in the area where appliance
is in use. They should never be allowed to sit or stand
on any part of the appliance.
Stepping, leaning or sitting on the door
or drawer of this range can result in serious injuries
and also cause damage to the range. Do not allow
important Safety instructions
• DO NOTTOUCH SURFACE BURNERS, AREAS NEAR
THESE BURNERS, OVEN BURNERS OR iNTERiOR
SURFACES OF THE OVEN. Both surface burners and
oven burners may be hot even though flames are not
visible. Areas near surface burners may become hot
enough to cause burns. During and after use, do not
touch, or let clothing or other flammable materials touch
these areas until they have had sufficient time to cool.
Among these areas are the cooktop, surfaces facing the
cooktop, the oven vent openings and surfaces near
these openings, oven door and window.
• Wear properappareI--Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
• Do not use water or flour on grease fires--Smother
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or
grease may catch fire if allowed to become too hot.
In case of fire or gas leak, be sure to turn
off the main gas shutoff valve.
• Use only dry potholders--Moist or damp potholders
on hot surfaces may result in burns from steam. Do
not let potholders touch hot heating burners. Do not use
a towel or other bulky cloth instead of a potholder.
• Do not heat unopened food containers--Buildup of
pressure may cause container to burst and result in
injury.
• Remove the oven door from any unused range if it is
to be stored or discarded.
IMPORTANT--Do not attempt to operate the oven during
a power failure. If the power fails, always turn off the
oven. If the oven isnot turned off and the power resumes,
the oven may begin to operate again. Once the power
resumes, reset the clock and oven function.
Electronic controllers can be damaged
by cold temperatures. When you use your appliance for
the first time, or if it has not been used for a long
period of time, make sure that it has been exposed to a
temperature above 0°C/32°F for at least 3 hours before
connecting it to the power supply.
iMPORTANT iNSTRUCTiONS FOR USING
YOUR COOKTOP
Use proper flame size--Adjust flame size
so it does not extend beyond the edge of the utensil. The
use of undersized utensils will expose a portion of the
burner flame to direct contact and may result in ignitionof
clothing. Proper relationship of utensil to flame will also
improve efficiency.
Do not use stove top grills on the burner
grates of sealed gas burners. If you use a stove top grill on
a sealed gas burner, it will cause incomplete combustion
and can result in exposure to carbon monoxide levels above
allowable current standards. This can be hazardous to your
health.
• Know which knob controls each surface burner.
Place a pan of food on the burner before turning iton,
and turn the burner off before removing the pan.
• Always turn the knob to the full LITE position when
igniting top burners. Visually check that burner has lit.
Then adjust the flame so itdoes not extend beyond the
edge of the utensil.
• Use proper pan size. This appliance is equipped with
one or more surface burners of different sizes. Select
utensils having flat bottoms large enough to cover the
surface burner. The use of undersized utensils will
expose a portion of the surface burner to direct contact
and may result in ignition of clothing. Proper relationship
of utensil to the surface burner will also improve
efficiency.
• Utensil handles should be turned inward and not
extend over adjacent surface burners. To reduce the
risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil, the
handle of the utensil should be positioned so that it is
turned inward, and does not extend to adjacent surface
burners.
• Never leave surface burners unattended at high heat
settings--Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.
• Protective liners--Do not use aluminum foil to line
surface burner pans, or oven bottom, except as
suggested in this manual. Improper installation of these
liners may result in risk of electric shock, or fire.
• Glazed cooking utensils--Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for rangetop service without
breaking due to the sudden change intemperature.
Check the manufacturer's recommendations for cooktop
use.
Do not use Searing Grill on the cooktop. The searing
grill is not designed for use on the cooktop. Doing so
may result in a fire.
Do not use decorative surface burner covers, if a
burner is accidentally turned on, the decorative cover will
become hot and possibly melt. Burns will occur if the hot
covers are touched. Damage may also be done to the
cooktop or burners because the covers may cause
overheating. Air will be blocked from the burner and
cause combustion problems.
important Safety instructions
FOR GLASS COOKTOPS ONLY
• Do not clean or operate a broken cooktop--lf cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
• Clean cooktop glass with caution--If a wet sponge or
cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can
produce harmful fumes if applied to a hot surface.
• Avoid scratching the cooktop glass with sharp
objects.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
= Use care when opening oven door or warmer drawer
(if equipped)--Stand to the side of the range when
opening the door of a hot oven. Let hot air or steam
escape before you remove or replace food in the oven/
warmerdrawer.
• Keep oven vent ducts unobstructed. The oven vent is
located at the center rear of the cooktop. Touching the
surfaces in this area when the oven is operating may
cause severe burns. Also, do not place plastic or heat-
sensitive items on or near the oven vent. These items
could melt or ignite.
NEVER cover any slots, holes or
passages in the oven bottom or covet an entire rack
materials such as aluminum foil. Doing so blocks air flow
through the oven and may cause carbon monoxide
poisoning. Aluminum foil linings may trap heat, causing a
fire hazard.
• Placement of oven/warmer drawer (if equipped) racks.
Always place oven racks in desired location while oven/
warmer drawer (if equipped) is cool. if rack must be
moved while oven is hot use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements inthe oven/warmer drawer (if equipped).
Remove all utensils from the rack before moving.
• Do not use the broiler pan without its insert. The
broiler pan and its insert allow dripping fat to drain and be
kept away from the high heat of the broiler.
• Do not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Do not touch a hot light bulb with a damp cloth. Doing
so could cause the bulb to break. Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
• Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When you are flaming
food under the hood, turn the fan on. Refer to the hood
manufacturer's instructionsfor cleaning.
SELF=CLEANING OVENS
• in the self=Cleaning cycle only clean the parts listed in
this Use and Care Guide. Before self-cleaning the oven,
remove the broiler pan and any utensils or foods from the :!
oven.
• Do not use oven cleaners--No commercial oven cleaner
or oven liner protective coating of any kind should be
used in or around any part of the oven.
• Do not clean door gasket--The door gasket isessential
for a good seal. Care should be taken not to rub, damage
or move the gasket.
• Remove oven racks. Oven racks color will change if left
in the oven during a self-cleaning cycle.
The health of some birds is extremely
sensitive to the fumes given off during the self=cleaning
cycle of the range. Move the birds to another well
ventilated room.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires businesses
to warn customers of potential exposure to such
substances.
SAVE THESE SAFETY INSTRUCTIO
Grounding instructions
For personal safety, the cooktop must beproperly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properlygrounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension cord.
If a 2-prong wall receptacle is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly g rounded
3-prong wall receptacle installed by a qualified electrician.
See the iNSTALLATiON INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
Grounding type
wall receptacle
circumstances,
cut, remove, or
bypass the
grounding prong.
pply cord with
3-prong grounding plug
This appliance isequipped with a3-prong grounding
plug for your protection against shock hazard and should be plugged
directly intoa properly g rounded receptacle. DO NOTcut or remove
the grounding prong from this plug.
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failu re tofollow this warning can cause serious injury,
fire or death.
Avoid fire hazard or electrical shock.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion _ Personal injury or death from electrical shock
to Liquefied Petroleum (L.P.) Gas. may occur if the range isnot installed by a qualified installer
or electrician.
Only a qualified service agent should perform the L.P.
conversion. If L.P. conversion is needed, contact 1-800-4-
MY-HOME@ for assistance. The L.P. Conversion Kit is
provided with this range and islocated on the right panel
(right side) of the range. Before installing the kit be sure to
follow the L.P. Installation Instructions carefully.
required in order for this appliance to satisfactorily meet the
application needs must be made by Sears Service Center.
Any additions, changes or conversions
Range Features
Your
Range
Features
At a Glance
Self-Cleaning Oven __
Removable Surface Burner
Grates (Styles and color
will vary by model)
Electronic Oven Controls
with Clock and Kitchen Timer
Surface Burner
Control Knobs
Oven Light
(2) Adjustable
Oven Racks
Z
Oven Door Handlei: :
Storage Drawer
12,200 BTU
Sealed Burner
(LP convertible
Glass Front Oven
Doorwith Large
WindowOpening
Oven Vent
5,OOOBTU
Sealed Burner
(LP convertible)
14,000 BTU
Sealed Burner
(LP convertible)
Note: The features
of your range will
vary according to
model.
9,500 BTU
Sealed Burner
(LP convertible)
Porcelain Cook Top
Before Setting Surface Controls
Assembly of the Surface Burner Heads, Burner Caps and Burner Grates
It is very important to make sure that all of the Surface Burner Heads, Surface Burner Caps and Surface Burner Grates are
installed correctly and at the correct locations.
1. Remove all packing tape from cooktop area. Remove
all Burner Caps and Burner Heads.
2. Discard all packing material located under Burner
Heads (if applicable).
3. To replace the Burner Heads & Caps, match the
letters located under center of Burner Caps with the
letters located inside Burner Heads (Figure 1).
4. Match BurnerSkirtswith Burner Heads and Burner
Caps (see Figure 1). Replace the Burner Heads and
Caps on cooktop (see Figure 2). Carefully align the
Electrodes into slot or hole of each Burner Head
(Figure 3). Note: The Burner Heads should sit flat on
Cooktop Burner Skirts.
5. Place the removable oven vent cover over the fixed
oven vent cover.
6. Unpack Burner Grates and position on the cooktop.
REMEMBER -- DO NOT ALLOW SPILLS, FOOD,
CLEANING AGENTS OR ANY OTHER MATERIAL TO
ENTER THE GAS ORiFiCE HOLDER OPENING. Always
keep the Burner Caps and Burner Heads in place
whenever the surface burners are in use.
Figure 1
Figure 2
Figure 3 align into slot or hole for each
Burner Head
W14K
Figure4
Control Locations of the Gas Surface
Burners
Your range is equipped with gas surface burners with
different BTU ratings. The ability to heat food quicker
and in larger volumes increases as the burner size
increases.
The small SIMMER burner is best used for simmering
delicate sauces, etc. This burner is located at the right
rear burner position on the cooktop (see Figure 4).
The STANDARD burner can be used for most surface
cooking needs. The standard burner is located at the
left front position on the cooktop (see Figure 4).
The POWER burners are best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. The POWER burners
are located at the right front and left rear burner positions
on the cooktop (see Figure 4).
Regardless of size, always select cookware that is
suitable for the amount and type of food being prepared.
Select a burner and flame size appropriate to the pan.
Never allow flames to extend beyond the outer edge of
the pan.
Setting Surface Controls
Do not place plastic
items such as salt and pepper shakers,
spoon holders or plastic wrappings on
top of the range when it is in use. These
items could melt or ignite. Potholders,
towels or wood spoons could catch fire if
placed too close to a flame.
In the event of an electrical power outage,
the surface burners can be lit manually. To
light a surface burner, hold a lit match to
the burner head, then slowly turn the
surface control knob to LITE. After burner
lights push in and turn knob to desired
setting. Use caution when lighting surface
burners manually.
Operating the Gas Surface Controls:
t. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of
the OFF position (See Figure t).
3. Release the knob and rotate to the LITE position (Figure 2). Note: All
four electronic surface ignitors will spark at the same time. However,
only the burner you are turning on will ignite.
4. Visually check that the burner has a flame.
5. Turn the control knob counterclockwise to the desired flame size. The
control knobs do not have to be set at a particular setting. Use the knob
indicator settings to adjust the flame as needed. DO NOT cook with the
surface control knob in the LITE position. (The electronic ignitor will
continue to spark if the knob is left in the LITE position.)
Setting Proper Surface Burner Flame Size
Formost cooking, start on the highest control setting and then turn to a
lower one to complete the process. Use the recommendations below as a
guide for determining proper flame size for various types of cooking. The
size and type of utensil used and the amount of food being cooked will
influence the setting needed for cooking.
*Flame...................................................................................................................................Size ..............................................................................................................................................................Type of Cooking
Figure 1
Figure 2
High Flame Start most foods; bring water to a boil; pan broiling.
Medium Flame Maintain a slow boil; thicken sauces, gravies; steaming.
Low Flame Keep foods cooking; poach; stewing.
*These settings are based on using medium-weight metal or aluminum
pans with lids. Settings may vary when using other types of pans. The
color of the flame isthe key to proper burner adjustment. A good flame is
clear, blue and hardly visible in a well-lighted room. Each cone of flame
should be steady and sharp. Adjust or clean burner ifflame isyellow-orange.
Regardless of size, always select cookware that is suitable for the amount
and type of food being prepared. Select a burner and flame size appropriate
to the pan. Never allow flames to extend beyond the outer edge of the pan.
Never extend the flame beyond the outer edge of the utensil. A higher
flame wastes heat and energy and increases your risk of being burned
by the flame (Figure 3).
For deep fat frying, use a thermometer and adjust the surface control knob
accordingly. If the fat is too cool, the food will absorb the fat and be greasy.
If the fat istoo hot, the food will brown so quickly that the center will be
undercooked. Do not attempt to deep fat fry too much food at once as the
food will neither brown nor cook properly.
Figure 3
Proper
flame size
9