Kenmore 790.7535, 790.7534, 7534, 790.7533 Use & Care Manual

Download

Use & Care Guide

Gufa de uso y cuidada

English / Espafiol

Model/Modelos: 790.7535,*

I(enmore Elite°

PN 807190001 Rev A

Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A.

www.kenmore.com www.sears.com

Table of Contents

Kenmore Limited Warranty ..................................................................... 2

Before Setting Surface Controls .................................................................. 8

Setting Surface Burners .............................................................................. 11

Before Setting Oven Controls ................................................................... 13

Setting Oven Controls ................................................................................. 14

Care and Cleaning ..................................................................................... 36

Cleaning Various Parts of Your Oven ................................................. 36

Replacing the oven light ......................................................................... 38

Removing and Replacing the Oven Door ............................................ 39

Before You Call ........................................................................................... 40

Oven Baking ............................................................................................. 40

Solutions to Common Problems .............................................................. 41

I(enmore Limited Warranty

When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair. This warranty applies for only 90 days from the date of purchase if this appliance is ever used for other than private family

purposes.

This warranty covers only defects in material and workmanship. Sears will NOT pay for:

1. Cracks in a ceramic glass cooktop that are not a result of thermal shock.

2. Stains and scratches on a ceramic glass cooktop resulting from failure to maintain it properly according to all instructions

supplied with the product.

3. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.

4. A service technician to instruct the user in correct product installation, operation or maintenance.

5. A service technician to clean or maintain this product.

6. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with the

product.

7. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.

8. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recom-

mended in all instructions supplied with the product.

9. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.

Disclaimer of implied warranties; limitation of remedies

Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not allow the exclusion or limi- tation of incidental or consequential damages, or limitation on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

Important Safety Instructions

Read all instructions before using this appliance.

This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow al instructions given. Do not attempt to install or operate your appliance until you have read the safety

precautions in this manual. Safety items

throughout this manual are labeled with a WARNING or CAUTION statement based on

the risk type.

DEFINITIONS

This is the safety alert symbol. It is used to

alert you to potential personal injury hazards. Obey all safety message that follow this symbol to avoid possible injury or death.

_]__-Indicates a potentially

hazardous situation which, if not avoided, may result in death or serious injury.

_[_m_-Indicates a potentially

hazardous situation which, if not avoided, may result in minor or moderate injury.

Important- indicates installation, operation, maintenance, or valuable information that is

not hazard related.

lf the information in this manual

ed exactly, a fire or explosion

may result causing property damage,

_ersonal injury or death.

FOR YOUR SAFETY: ° Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do

not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas

supplier's instructions.

• If you cannot reach your gas supplier, call the fire department.

• Installation and service must be performed by a qualified installer,

service technician or the gas supplier.

DO NOT LEAVE CHILDREN

ALONE - children should not be left alone or

unattended in the area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance, including the storage drawer, lower broiler drawer, warmer drawer, or lower double oven.

Stepping, leaning or sitting on the

door or drawers of a range can result in serious injuries and also cause damage to the

appliance. DO NOT allow children to climb or play around the range. The weight of a

child on an open oven door, may cause the range to tip, resulting in serious burns or other

injury.

NEVER cover any slots, holes, or

passages in the oven bottom or cover an entire oven rack with materials such as

aluminum foil. Aluminum foil linings may trap heat, causing a fire hazard.

Storage in or on appliance m

flammable materials should not be stored in an over, near surface units, or in the storage

drawer, warmer drawer or lower oven. This includes paper, plastic and cloth items, such as cookbooks, plastic ware and towels, as well as flammable liquids. Do not store explo- sives, such as aerosol cans, on or near the

range.

Air curtain or other overhead

range hoods which operate that operate by blowing a downward air flow onto a range,

shall not be used in conjunction with gas

ranges other than when the range and hood have been designed, tested, and listed by an

independent test laboratory for use in combi-

nation with each other.

Never use this appliance as

space heater to heat or warm room. Doing so may result in carbon monoxide poisoning.

Do not use the oven or warming

_torage.

Save these instructions for future reference.

Important Safety Instructions

Read all instructions before using this appliance.

Tip Over Hazard

* A child or adult can tip the range and be killed.

* Verify the anti-tip device has

been installed to floor or wall.

• Ensure the anti-tip device is re-engaged to floor or

wall when the range is moved.

• Do not operate the range without the anti-tip

device in place and engaged.

• Failure to follow these instructions can result in death or serious burns to children and adults.

leveling leg Range \@_._.=

__ bracket

To check if the anti-tip bracket is installed properly,

use both arms and grasp the rear edge of the range back. Carefully attempt to title range

forward. When properly installaed, the range should not tilt forward.

Refer to the anti-tip bracket installation instructions

supplied with your range for proper installation.

Anti-tip

Wear proper apparel. Loose- fitting or hanging garments should never be worn while using this appliance. Do not let clothing or other flammable materials come

into contact with hot surfaces.

When heating fat or grease, watch it closely. Fat or grease may catch fire

if it becomes too hot.

Do not use water or flour on

grease fires. Cover the fire with a pan lid, use

baking soda, or use a dry chemical or foam

type extinguisher.

Use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot cooking areas. Do not use towels or other bulky cloths.

Important: Read and follow these instructions and precautions for unpacking, installing, and servicing your appliance:

Remove all tape and packaging before using the range. Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.

Do not store items of interest to

children in the cabinets above a range on the backguard of the ranges. Children climbing on the range to reach items could be seriously injured.

Do not touch surface heating

units or surface cooking elements, areas near these units or elements, or interior surface of

the oven. Surface heating areas and oven heating elements may be hot even though they appear cool. Areas near surface cooking units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they are cool. These areas may include the cooktop, surfaces facing the cooktop, oven vent areas, oven door, and oven window.

Do not heat unopened food

containers. Build-up of pressure may cause container to burst and result in injury.

Proper InstallationmBe sure your appliance is properly installed and grounded by a qualified technician in

accordance with the National Fuel Gas Code ANSI Z223.- latest edition, or in Canada CAN/CGA B149.1, and CAN/

CGA B149.2, and the National Electrical Code ANSI/NFPA No.70-1atest edition, or

in Canada CSA Standard C22.1, Canadian Electrical Code, Part 1, and

local code requirements. Install only per installation instructions provided in the literature package for this range. Ask your dealer to recommend a qualified techni-

cian and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency.

Save these instructions for future reference.

User servicing--Do not repair or replace any part of the appliance unless specifi- cally recommended in the manuals. All other servicing should be done only by a qualified technician. This reduces the risk of personal injury and damage to the range. Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency.

Remove the oven door from any unused range if it is to be stored or discarded.

Never modify or alter the construction of a range by removing the leveling legs, panels, wire covers, anti-tip brackets/ screws, or any other part of the range.

Important

Important Instructions for Using your Cooktop

Use Proper Flame Size- Adjust

flame size so it does not extend beyond the edge of the utensil. The use of undersized

utensils will expose a portion of the burner flame to direct contact and may result in

ignition of clothing. Proper relationship of utensil to flame will also improve efficiency.

Know which knob controls each surface burner. Place a pan of food on the burner

before turning it on, and turn the burner off before removing the pan.

Always turn knob to the full Lite position when igniting top burners. Visually check

that burner has lit. Then adjust the flame so it does not extend beyond the edge of

the utensil.

Do not operate range during a power failure. If power fails, turn off range. If range is not turned off and power resumes, the range may begin to operate again. Once the power resumes, reset the clock

and over function. Cold temperatures can damage the elec-

tronic control. When using this appliance for the first time, or when the appliance has not been used for an extended period of time, be sure the appliance has been in temperatures above 32°F (0°C) for at least 3 hours before turning on the power to the appliance.

Remove the oven door from any unused range if it is to be stored or discarded.

Be sure to have an appropriate foam-type fire extinguisher available, visible, and easily accessible located near the appli-

ance.

Utensil handles should be turned inward and not extend over adjacent surface

burners- To reduce the risk of burns,

ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned so that it is turned inward, and does not extend over adjacent surface

burners.

Never leave surface burners unattended at high heat settings -- Boil overs cause

smoking and greasy spills that may ignite, or a pan that has boiled dry may melt.

Glazed cooking utensils -- Only certain types of glass, glass/ceramic, ceramic,

earthenware, or other glazed utensils are suitable for cook top service without breaking due to the sudden change in temperature. Check the manufacturer's recommendations for cook top use.

When you are flaming foods under a ventilating hood, turn the fan on.

Important: Important Safety Notice - The

California Safe Drinking Water and Toxic

Enforcement Act requires the Governor of

California to publish a list of substances

known to cause cancer, birth defects or other reproductive harms, and requires businesses

to warn customers of potential exposures to such substances.

Save these instructions for future reference.

Important Instructions for Using Your Oven

Never use your appliance for warming or heating the room. Doing so may result in CARBON MONOXIDE poisoning.

Use care when opening over door, lower oven door, or warmer drawer (some models). Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.

Keep oven vent ducts clear. Touching surfaces in this area when the oven is on

may cause severe burns. Do not place plastic or heat-sensitive items on or near

the oven vent. These items can melt or ignite.

Always handle oven racks when the oven is cool. Place oven racks in desired

positions while the oven is cool. if a rack must be moved while the oven is hot, use extreme caution. Use potholders and grasp the rack with both hands to reposi- tion. Do not let potholders contact the hot heating elements in the oven. Remove all cookware and utensils before moving the

rack. Do not use a broiler pan without its insert.

Broiler pans and inserts allow dripping fat to drain away from the high heat of the

broiler. Do not cover the broiler insert with aluminum foil; exposed fat and grease

could ignite.

Important Instructions for Cleaning Your Range

Before manually cleaning any

part ot the range, be sure all controls are

turned OFF and the range is cool. Cleaning a

hot range can cause burns

Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area around each burner element. Do not allow grease

to accumulate. On models with stainless steel cooktops,

clean with warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a soft clean cloth. Do not use any store bought cleaners like stainless steel cleaners or any other types of cleaners containing any abrasive, chlo- rides, chlorine, or ammonia. It is recom- mended to use mild dish soap and water or a 50/50 solution of water and vinegar.

Always follow the manufacturer's recom- mended directions for use of kitchen

cleaners and aerosols. Be aware that excess residue from cleaners and aerosols

may ignite causing damage and iniury. Clean ventilating hoods frequently. Grease

should not be allowed to accumulate on the hood or filter. Follow the manufac-

turer's instructions for cleaning hoods.

Self-Cleaning Ovens

Do not use aluminum foil or other protec- tive liners to line the oven bottom. Only

use aluminum foil as recommended in this manual. Improper installation of these

liners may result in risk of electric shock or fire.

° Do not cook food on the oven bottom.

Always cook in proper cookware and always use the over racks.

Save these instructions for future reference.

Use the self-clean cycle to clean only the parts listed in this manual. Before using self-clean, remove the broiler pan, any food, utensils, and cookware from the

oven. Remove oven racks unless otherwise instructed.

Do not use oven cleaners. No commercial oven cleaner, oven liner, or protective

coating of any kind should be used in or around any part of the oven.

Do not clean the oven door gasket. The door gasket is essential for a good seal. Do not rub, damage, or move the gasket.

Some birds are extremely sensitive to the fumes given off during the self-clean cycle of any range. Move birds to another well-

ventilated room.

Grounding Instructions

Conversion to L.P. Gas

For models factory-equipped with a power cord:

For personal safety, this appliance must be properly grounded. For maximum safety, the power cord must be plugged into an elec- trical outlet that is correctly polarized and properly grounded. If a two-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded three-prong wall receptacle installed by a qualified electrician.

Grounding type wall receptacle

Power supply cord

with 3-prong grounding plug

Avoid fire hazard or electrical

shock. Do not use an adapter plug, and extension cord, or remove grounding prong from the power cord. Failure to follow this warning may cause serious injury, fire, or

death.

Personal injury or death from electrical shock may occur if the conversion to L.P. gas is not made by a qualified

installer or electrician.

l_]_Any additions, changes or conver- sions required in order for this appliance to satisfactorily meet the application needs must

be made by a qualified technician. If L.P.conversion is needed, contact your local

L.P. Gas provider for assistance. The L.P. conversion kit is provided with this appliance and is located on the lower REAR (back side)

panel of the range. Before installing the kit be sure to read the L.P.Installation Instructions

and follow them carefully when making the installation.Product Record

You may find the model and serial number

printed on an identification label. The label is

located on the lower right of the oven frame. Open the drawer to see the serial label.

Serial Plate Location

To locate the serial plate open storage drawer (some models) or warmer drawer (some models). The serial plate is attached to the lower right oven frame.

This appliance is equipped with a three-prong grounding plug. For your protec- tion against shock hazard, it should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

See the installation instructions packaged with this appliance for complete installation and grounding instructions.

Important note:

This appliance allows for conversion to

Liquefied Petroleum (L.P.) Gas.

Save these instructions for future reference.

Record the date of purchase, model and serial

number of your product in the corresponding space below..

Model

Number:

Serial Number:

Date of Purchase:

Save your sales receipt for future reference.

Before Setting Surface Controls

Check burner cap placement before operating the surface burners

To prevent flare-ups and avoid creation of

harmful by-products, do not use the cooktop without all burner caps properly installed to insure proper ignition and gas flame size.

It is very important to be sure that all surface burner caps and burner grates are properly installed and in the correct locations BEFORE operating the cooktop burners.

Important:

• Always keep surface burner caps in place whenever using a

surface burner.

• When placing the burner caps, be sure that all burner caps

are seated firmly and rest level on top of burner heads.

• For proper flow of gas and ignition of burners DO NOT

allow spills, food, cleaning agents or any other material to enter the gas orifice port opening.

• On round style burners, the burner cap lip (Figure 1) should

fit snug into the center of burner head and rest level. Refer to Figure 2for correct and incorrect burner cap placement.

• Once in place, you may check the fit by gently sliding the

burner cap from side to side (Figure 3) to be sure it is centered and firmly seated. When the burner cap lip makes contact inside the center of the burner head you will be able to hear the burner cap click.

• Please note that the burner cap should NOT move off the

center of the burner head when sliding from side to side. Check and be sure that all oval style (some models) burner caps are correctly in place on oval burner heads.

Burner cap

Burner cap lip

Figure 1: Burner cap on burner head

Correct burner cap

placement

Figure 2: Correct placement (L) Incorrect placement (R)

Incorrect burner cap

placement

Figure 3: Moving cap gently until seated properly

Before Setting Surface Controls

Double Ring style burners (somemodets)

The Double Ring burner only operates properly with two burner caps in place. Be sure the burner cap lips are positioned facing

down towards the burner head and into the recessed areas (Figure 4) on each side of the burner head. Be sure both burner

caps are seated firmly and rest level on the burner head before operating. Check the fit for each cap using the same method for the round burner caps by gently sliding each cap from side to side. Please note that the burner cap lips should NOT move out of recessed

areas of the burner head.

Dual burner head (some models)

Burner cap

Burner Lap lip

Burner head

cessed areas

Burner

head

Burner caps

Installing burner grates

Do not use the surface burners without the

burner caps and burner grates properly installed. Missing pieces or improper installation may lead to spills, burns, or damage to your range and cookware.

Make sure the burner grates are properly placed on the cooktop before using the surface burners. The grates are designed to rest

inside the recess on the cooktop. To install burner grates, place grates flat-side down and align into the cooktop recess. Grates should rest flush against each other and against the sides of the recess. When properly installed they should rest securely on the cooktop and not slide out of place. (Figure 5)

Figure 4: Dual burner head using two burner caps

Figure 5: Proper grate installation

BeforeSettingSurfaceControls

Using proper cookware

_E__DO NOT place flammable items such as plastic

salt and pepper shakers, spoon holders or plastic wrappings on the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the range cooktop.

Important: DO NOT place aluminum foil, or ANY material that can melt on the range cooktop. If these items melt they may damage the cooktop.

For best cooking results, cookware should have flat bottoms that rest level on the burner grate. Before using cookware, check for flatness by rotating a ruler across the bottom of the cookware

(Figure 6.

_._. ....\

Setting proper burner flame size

Never extend the flame beyond the outer edge

of the cooking utensil. A higher flame wastes energy, and increases your risk of being burned by the flame. _These settings are based for medium-weight metal or aluminum pans with lids. Settings may vary when using other types of pans. The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharp. Adjust or clean burner if flame is yellow-orange.

iiiiiiiiiiiiiiiiiiiiiiii!!iiiiiiii!i

flame setting

Figure 6: Check for flat bottom cookware

Please note: The size and type of utensil used, and the amount and type of food being cooked will influence the burner flame setting needed for best cooking results.

Cookware material types

The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware resists staining & pitting).

• Copper - Excellent heat conductor but discolors easily.

• Stainless - Slow heat conductor with uneven cooking results.

Is durable, easy to clean and resists staining.

• Cast Iron - A slow heat conductor however will retain heat

very well. Cooks evenly once cooking temperature is reached.

Porcelain-enamel on metal - Heating characteristics will vary depending on base material.

Glass - Slow heat conductor.

incorrect

flame setting

Figure 7: Proper flame size for efficient cooking

For most cooking; start on the highest setting and then turn to a lower setting to complete the process. Use the recommendations below as a guide for determining proper flame size for various types of cooking (Figure 7) For deep fat frying; use a thermometer and adjust the surface knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be under cooked. Do not attempt to deep fat fry too much food at once as the food will neither brown or cook properly.

Flame size

High flame Start most foods, bring water

Medium flame Maintain a slow boil, thicken

Low flame Keep foods cooking, poach-

Type of cooking

to a boil, pan broiling.

sauces, gravies, steaming.

ing, and stewing.

Setting Surface Burners

Your gas appliance may be equipped with different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases. It is important to select cookware that is suitable for the amount and type of food being prepared.

• The smaller SIMMER burner (on some models) is best suited

for simmering delicate sauces, etc.

• The standard size burners may be used for most surface

cooking needs. Some models are equipped with a center burner.

The larger POWER burners (on some models) or TURBO BOIL burner (on some models) are recommended for bringing large quantities of liquid to temperature and when preparing larger quantities of food.

To set surface burners:

1. Place cooking utensil on center of surface burner grate. Be

sure the cooking utensil sets stable on the burner grate.

2. Push the desired surface control knob in and turn counter-

clockwise out of the OFF position.

3. Release the surface control knob and rotate to the Lite

position. Visually check that the burner is lit.

4. Once the burner has a flame, push the control knob in and

turn counterclockwise to the desired flame size. Use the control knob markings and adjust the flame as needed.

Important notes:

• DO NOT cook with the surface control knob left in the Lite

position. The electronic ignitor will continue to spark if the control knob setting remains in the Lite position.

• When setting any surface control knob to the Lite position,

all electronic surface ignitors will spark at the same time. However, only the surface burner you are setting will ignite.

• NEVER place or straddle a cooking utensil over 2 different

surface cooking areas at the same time. This can cause uneven heating results.

In the event of an electrical power outage, the surface burners can be lit manually. Use caution when lighting surface burners manually. To light a surface burner, hold a lit match to the burner head, then slowly turn the surface control knob to Lite. After burner lights push in and turn knob to desired setting.

When operating the oven, it is possible for residual heat from the oven to build-up and over time to eventually transfer to the surface control knobs located directly above

the oven door.

Figure 8: Proper way to set burners

Do not place flammable items such as plastic

Do not place aluminum foil, or ANY material

that can melt on the range cooktop. If these items melt they may permanently damage the cooktop surface.

Home Canning

Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA (United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for home canning procedures.

• Use only quality flat bottom canners when home canning. Use a straight-edge to check canner bottom.

• Use only a completely flat bottom canner.

• Make sure the diameter of the canner does not exceed 1 inch beyond the surface element markings or burner.

• Start with hot tap water to bring water to boil more quickly.

• Use the highest heat setting when first bringing the water to a boil. Once boiling is achieved, reduce heat to lowest

possible setting to maintain that boil.

Setting Surface Burners

Setting Double Ring Burner (some models)

The versatile Double Ring surface burner offers a complete range of gas surface settings from the same burner position.

At the lowest setting, only the burner's inner ring is active, providing a smaller flame that is perfect for simmering. If needed, the burner's outer ring may be added and when set for HI will provide a gas flame that may be used to bring a large pan of liquid to boil quickly.

Operating the Double Ring Burner:

1. Push right front surface burner control knob in and turn counterclockwise out of the OFF position.

2. Release the knob and rotate to the Lite position.

Visually check that both inner and outer rings for the Double Ring burner are lit (Figure 11). Once lit, push in the

control knob and to turn counterclockwise out of the Lite position and adjust to the desired flame size.

When adjusting for a low or simmer type flame setting, continue to rotate the control knob counterclockwise from

MED setting towards LO (Figure 9). Between the MED and LO setting the flame for the outer ring portion of the burner will turn off leaving only the inner burner with a flame for simmering (Figure 11). Make any further flame adjustments

as needed.

Figure 11: Burner at highest (L) setting and simmer (R)

Do not place flammable items such as plastic salt and pepper shakers, spoon holders or plastic wrappings on the cooktop when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the range cooktop.

Do not place aluminum foil, or ANY material that can melt on the range cooktop. If these items melt they may permanently damage the cooktop surface.

Important:

• DO NOT cook with the surface control knob left in the Lite

position. The electronic ignitor will continue to spark if the control knob setting remains in the Lite position.

• When setting any surface control knob to the Lite position,

all electronic surface ignitors will spark at the same time. However, only the surface burner you are setting will ignite.

• NEVER place or straddle a cooking utensil over two

different surface cooking areas at the same time. This can cause uneven heating results.

Figure 9: Setting the double ring burner

OFF _ Ha • MED • LO

Figure 10: Burner levels

Before Setting Oven Controls

Oven vent location

The oven vent is located under the left side of the control panel. When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent:

oven vent

Figure 12: Oven vent in rear of range top

_ Always use pot holders or oven mitts when using

the oven. When cooking, the oven interior and exterior, oven racks and cooktop will become very hot which can cause burns.

Protective Liners -- DO NOT USE ALUMINUM FOIL to line the oven bottom. Only use aluminum foil as recom- mended in this manual. Improper installation of these liners may result in risk of electric shock, or fire

Types of oven racks

fiat handle

oven rack

Air circulation in the oven

For best baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. Hot air must be able to circulate around the

cookware in the oven for even heat to reach around the food.

ovenrack

Figure 13: Variety of racks and their uses The flat oven rack (some models) or flat handle oven rack (some

models) may be used for most cooking needs. The offset oven rack (on some models) is designed to place the

base of the rack about 1/2 of a rack position lower than flat oven racks. This design allows several additional positions between the flat rack positions.

To maximize oven cooking space place the bottom oven rack (on some models) in the lowest rack position for roasting large

cuts of meat.

Setting Oven Controls

1. Warmer Drawer - Use to keep cooked foods warm.

2. Timer Set/Off - Use to set or cancel timer.

3. Add 1Minute - Use to add additional minutes to timer.

4. Cook Time - Use to enter length of cooking time.

5. Delay Start - Use with Bake, Conv bake, Conv Convert and

Self Clean functions to program a delay start.

6. Slow Cook - Use to set Slow Cook function.

7. Warm & Hold - Use to select Warm & Hold.

8. Pre Heat - Use to precondition the oven temperature.

9. Cakes Breads - Use for baking cakes and breads.

10. Conv Convert - Use to select Conv Convert function.

11. Meat Probe - Use to set Meat Probe.

12. Self Clean - Use to set a 2 to 4 hour self clean cycle.

13. Conv Bake - Use to select Conv bake function.

14. Bake - Use for normal bake functions.

15. Light - Use to turn oven light On and Off.

16. START - Use to start all oven functions.

1Z STOP - Use to cancel any oven function previously entered

except Clock and Timer.

18. Broil - use to set broil function.

19. Conv Roast - Use to select Conv Roast function.

20. Clock - Use to set time of day.

21. Accent Light - Use to turn on Accent Light feature.

22. Oven Lockout - Use to lockout oven functions and door.

Minimum & maximum control settings

All of the features listed have minimum and maximum time and temperature settings that may be entered into the control. An

ENTRY acceptance beep will sound each time a key is touched (the Oven Lockout key is delayed by 3 seconds).

An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature

Feature

PreHeat

Bake

Broil

Timer

Self Clean

Conv Bake

Conv Roast

Slow Cook

Cook Time

Delay Time 12 Hr.

Delay Time 24 Hr.

Clock 12 Hr.

Clock 24 Hr.

Warm & Hold

Warmer Drawer

Min. Temp or Time

170°F / 77 ° C 170°F / 77°C

400°F / 205°C

Min

2 Hours

170°F / 77 ° C

170°F / 77 ° C Lo (225 °F / 108°C)

Min.

1:00

0:00 1:00

0:00

170°F / 77°C

150°F / 65°C

Max. temp. or time

550°F / 288°C 550°F / 288°C

550°F / 288°C 11Hrs. 59 Mins.

4 Hours

550°F / 288°C

550°F / 288°C Hi (275°F / 134°C) 11:59 12:59

23:59

12:59

23:59

3:00

190°F / 88°C

23. Numeric Keypad - Use to enter temperatures and times.

Setting Oven Controls

Setting the Clock

When the appliance is first powered up, 12:00 will flash in the display (Figure 14). The time of day must first be set before operating the oven.

Figure 14: Display showing 12:00 when oven is first powered up

1. Press @.

2. Enter 13 0 using numeric keys.

3. Press

Important note:

The clock cannot be changed when a Cook Time, Self Clean, Delay Start or cooking feature is active.

_START/

Setting Timer

The minute timer lets you to track your cooking times without interfering with the cooking process. The timer may be set

between 1 minute and 11 hours and 59 minutes. To set timer for 5 minutes:

Add 1 Minute

Use Add 1 Minute to set additional minutes to the timer. Each press of the key will add 1 additional minute. If Add 1 Minute is

pressed when the timer is not active, the timer will activate and begin counting down from 1 minute.

To add 2 minutes to the timer:

Press Add 1 Minute twice.

Setting 12 or 24 hour display mode

The clock display allows a choice between 12 or 24 hr modes. The factory pre-set clock display mode is 12 hours.

To set 12 or 24 hour display mode:

1. Press and hold (4) for 6 seconds.

2. Press Self Clean to toggle between 12 Hr day or 24 Hr day display modes.

3. Press STARTto accept choice.

Figure 15: Clock set for 12 hour operation

1. Press Timer Set/Off.

2. Enter 5 using numeric keypad

3. Press _ to start timer.

To cancel the timer when active press Timer Set/Off again.

START

Important note.

The timer does not start or stop the cooking process. It serves as an extra minute timer in the kitchen that will beep when the set time has run out. The timer may be used alone or while using any of the other oven functions.

The timer will display hours and minutes until 1 hour remains. When less than 1 hour remains, the display will

count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

When the timer is active during a cooking process, the minute timer will show in the display. To view the informa- tion of any other active oven function, press the key once

for the other function to view the status.

Figure 16: Clock set for 24 hour operation

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a factory preset built-in 12 Hour Energy Saving feature that turns off the oven if the oven is left on for more than 12 hours. The oven may be programmed to override this feature to continuously bake.

To change between continuous bake or 12-Hour Energy Saving feature:

1. Press and hold Timer Set/Off for 6 seconds. 12 Hr OFF should appear in the display.

2. Press Self Clean to toggle between 12 Hour OFF or Stay On feature.

3. Press to accept choice

Figure 17:12 Hour operation Figure 18: Continuous operation

sTART

Setting Oven Controls

Changing oven temperature display

The oven control is preset to display °F (Fahrenheit) when shipped from the factory. The control can be changed to display

either Fahrenheit or Celsius.

To change the display to °C (Celsius) or °F (Fahrenheit):

1. Press and hold Broil for 6 seconds. F or C should appear in the display.

2. Press Self Clean to toggle between Fahrenheit (F) and Celsius (C) temperature display modes.

3. Press _ to accept choice.

START

Important note. The oven temperature display cannot be changed when cooking

or if Self Clean is active.

Figure 19: Fahrenheit setting Figure 20: Celsius setting

Setting silent or audible control mode

Silent mode allows the oven control to operate without audible tones. The control may be programmed for silent operation and later returned to operating with all the normal audible tones.

To set for silent or audible mode:

1. Press and hold Delay Start for 6 seconds. The current setting will appear in the display.

2. Press Self Clean to toggle between bEEP On or bEEP OFF.

3. Press _ to accept choice.

START

Oven Lockout

The control may be programmed to lock the oven door and lock the oven control keys.

To activate the oven lockout features:

Be sure oven door is completely closed.

Press and hold • for 3 seconds, door Loc will appear in

STOP

the display (FigUre 23). The motor driven door latch mechanism will begin locking the oven door automatically.

Do not open the oven door. Allow about 15 seconds for the oven door to completely lock. Once door is locked, the Loc will appear in the display. (Figure 24)

Figure 23: Door locking Figure 24: Door locked

To cancel the oven lockout feature:

1. Press and hold sToP for 3 seconds. The motor door latch will begin unlocking the oven door automatically. Do not

open the oven door. Allow about 15 seconds for the oven door to completely unlock.

2. When the Loc message no longer displays, the oven door may be opened and the oven control keys will be available

for use.

OVEN

LOCKOUT

Important note.

• To avoid possible damage to the oven door latching mecha- nism, do not attempt to open or close the oven door whenever the door Loc message is displayed.

• If a control key is pressed when OVEN LOCKOUT is active, the control may triple beep indicating the function is not

available when the OVEN LOCKOUT feature is active.

Figure 21: Audible operation Figure 22: Silent operation

Setting Oven Controls

Setting PreHeat

For best baking performance use the PreHeat feature. The PreHeat feature will bring the oven up to the set cooking temperature. A reminder tone will indicate that the set tempera- ture is reached and to place the food in the oven.

When the oven is finished preheating the preheat feature will perform like the Bake feature and continue to maintain the oven set temperature until cancelled.

Preheat may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Always use pot holders or oven mitts when using

the oven. When cooking, the oven interior, oven exterior, oven racks and cooktop will become very hot which can cause burns.

To set Preheat with default oven temperature of 350°F:

1. Press PreHeat.

2. Press ....

To cancel preheating at anytime press

START "

,STOP

Setting Bake

Use the bake feature whenever the recipe calls for baking at normal temperatures. A reminder tone will indicate when the set bake temperature is reached and to place the food in the oven.

Bake may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Always use pot holders or oven mitts when using

the oven. When cooking, the oven interior, oven exterior, oven racks and cooktop will become very hot which can cause burns.

To set Bake with default temperature of 350°F:

1. Press Bake.

2. Press .....

START"

[]

To cancel Bake at anytime press STOP .

Toset Bake for oven temperature of 425°F:

1. Press Bake.

2. Enter 4 2 5 using numeric keypad.

3. Press ..........

To cancel Bake at any time press STOP.

START "

Figure 25: Oven in preheat mode for baking

1. Press PreHeat.

2. Press 4 5 0 using numeric keypad.

3. Press

To cancel preheating at any time press : STOP.

START "

/ [] ,

Important note.

• When setting Bake or any cooking feature that preheats the oven (except Broil), the convection fan will turn on and stay on until the oven reaches set temperature.

The oven will bake no longer than 12 hours. If you wish to set the oven for continuous baking: See "Changing between continuous bake setting or 12-Hour Energy Saving feature"

for detailed information.

Baking tips:

• When using two racks for baking, space the pans as shown in Figure 26 for more even baking results.

Dark or dull pans and glass absorb more heat than shiny bakeware resulting in dark or over browning of foods. To prevent this it may be necessary to reduce the oven temper- ature or cook time to prevent over browning of some foods. Dark pans are recommended for pies. Shiny pans are recommended for cakes, cookies and muffins.

• Do not open the oven door too often. Opening the door will reduce the temperature in the oven.

Figure 26: Space pans for more even baking

Setting Oven Controls

Setting Cook Time

Use Cook Time to program the oven control to automatically turn the oven function off after a desired length of time.

To program oven to Bake with oven default temperature of 350°F and to shut-off after 30 minutes:

1. Press Cook Time.

2. Enter 3 0 using numeric keys.

3. Press to accept.

START

4. Press Bake.

5. Press

START "

When the programmed cook time ends:

1. End will appear in the display window and the oven will shut-off automatically.

2. The oven control will beep 3 times every 30 seconds as a reminder until is pressed.

Figure 27: End of baking function

Setting Delay Start

Delay Start sets a delayed starting time to oven cooking or cleaning functions. Prior to setting a delay start, be sure the time of day is set correctly.

_FOOD POISONING HAZARD. Do not let food

sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when finished cooking.

To program oven for a Delay Start beginning at 5:30, to shut-off automatically after 50 minutes and for baking at 375°F:

1. Press Cook Time.

2. Enter 5 0 using numeric keypad.

3. Press _ to accept.

4. Press Delay Start.

5. Enter 5 3 0 using numeric keys.

6. Press

7. Press Bake.

8. Enter 3 7 5 using numeric keys.

9. Press _

START

STARTto accept.

START"

Important note.

• The Cook Time feature may be set with Bake, Conv Bake, Conv Roast, Slow Cook and Preheat. Cook Time or Delay Start will not operate with the Broil function.

• The maximum default Cook Time setting is 11 hours and 59 minutes.

• After the Cook Time feature is activated, press Cook Time to display any cook time remaining.

• Dark or dull pans and glass absorb more heat than shiny bakeware resulting in dark or over browning of foods. To

prevent this it may be necessary to reduce the oven temper- ature or cook time to prevent over browning of some foods. Dark pans are recommended for pies. Shiny pans are recommended for cakes, cookies and muffins.

• Do not open the oven door too often. Opening the door will reduce the temperature in the oven.

When the programmed cook time ends:

1. End will appear in the display window and the oven will shut off automatically. (Figure 27)

The oven control will beep 3 times every 30 seconds as a

reminder until sToP[] is pressed.

Important note.

• Delay Start may be set using a 24 hour clock. See "Setting 12 or 24 hour display mode'for more information.

The Delay Start feature may be used with the Conv Bake, Conv Roast, Conv Convert, Bake, Slow Cook and Preheat functions and Self Clean. Delay Start or Cook Time will not operate with the Broil function.

Setting Cony Bake

Benefits of the convection bake feature:

• Foods may cook up to 25 to 30% faster, saving time and

energy.

• Multiple rack baking. Convection functions use a fan to circulate the oven heat

uniformly and continuously around the oven. This improved heat distribution allows for fast and even cooking and browning results. It also gives better baking results when using two oven

racks at the same time. Heated air flows around the food from all sides, sealing in juices and flavors. Breads and pastry brown

more evenly. Most food items will cook faster and more evenly with the

convection feature.

Conv Bake may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Suggestions for Convection baking:

• For optimum cooking results it is recommended to preheat the oven when baking foods such as cookies, biscuits and

breads.

• Arrange bakeware as shown in Figure 28 when using the convection feature.

• Reduce oven temperature 25°F from recipe's recommended oven temperature. Follow the remainder of the recipe's instructions using the minimum recommended cook time.

• For best results when using a single oven rack, place rack in position 3 or 4 (Figure 29). When using 2 oven racks, place in positions 3 & 5. When using 3 oven racks place in positions 2, 4, & 6 (use offset rack only in position 6).

To set Conv Bake with a default oven set temperature of 350°F:

1. Press Conv Bake.

Setting Oven Controls

Figure 29: Oven rack positions and air circulation

If the oven door is opened when any convection function is active, the convection fan will stop rotating until the oven

door is closed.

When using Conv Bake cook time reductions may vary depending on the amount and type of food being cooked.

Do not open the oven door too often. Opening the door will reduce the temperature in the oven.

2. Press

To cancel Conv Bake at any time press sToP

Figure 28: Pan placement using multiple racks in conv bake

Setting Oven Controls

Setting Conv Convert

The Conv Convert function makes it easy to convert any baking recipe using the convection feature. The oven control uses the normal recipe settings and adjusts to a lower temperature for convection baking.

When Conv Convert is used with a Delay Start setting, the Conv Convert function will display a CF message (Figure 30) as a reminder to check food when the bake time is 75% complete. At this time the oven control will sound 1 long beep at regular

intervals until the set cook time has finished.

Figure 30: Check food reminder

3. Press Conv Convert.

To cancel Conv Convert at any time press sToP.

To program oven for Cony Convert with oven temperature of 375°F and to shut-off after 30 minutes:

1. Press Conv Bake.

2. Press ST_ to accept.

3. Press Cook Time.

4. Enter 3 0 using numeric keys.

5. Press to accept.

6. Press 3 7 5 using numeric keypad.

7. Press _ to accept.

8. Press Cony Convert.

STARTi

START

Selling Conv Roast

The Conv Roast function combines a cook cycle with the convec- tion fan to roast meats and poultry. Meats cooked with Conv Roast function will be juicer and poultry will be crisp on the outside while staying tender and moist on the inside.

Conv Roast may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Suggestions for Conv Roast:

• Preheating is not necessary when roasting foods using Conv Roast.

Since Conv Roast cooks food faster, reduce the cook time by 25% from the recommended cook time of your recipe (check the food at this time). If necessary, increase cook

time until the desired doneness is obtained.

• Do not cover foods when dry roasting - this will prevent the meat from browning properly.

To set Conv Roast with a default oven set temperature of 350°F:

1. Press Conv Roast.

2. Press ....

START.....

[]

To cancel Conv Roast at any time press .

Important note;

• If the oven door is opened when any convection function is active, the convection fan will stop rotating until the oven

door is closed.

To cancel Conv Convert and stop the cooking process at any time press =

STOP"

Important note=

• Conv Convert may only be used with the Conv Bake function and with 20 minutes as the minimum amount of

Cook Time for using the Conv Convert function.

• When using Conv Convert function Cook Time reductions may vary depending on the oven set temperature.

• The convection fan will begin rotating once Conv Bake, Conv Roast or Conv Convert has been activated.

• If the oven door is opened when any convection function is active, the convection fan will stop rotating until the oven

door is closed.

Setting Broil

Use the broil function to cook meats that require direct exposure to radiant heat for optimum browning results. The Broil feature is

factory preset to broil at 550°F. The Broil function temperature may be set at any temperature between 400°F (205°C) and

550°F (2B8°C).

Be aware that the suggested broil settings table (Table 1) provide recommendations only. Increase or decrease broiling times, or move to a different rack position to suit for doneness. If the food you are broiling is not listed in the table, follow the instructions provided in your cookbook and watch the item closely.

To set Broil with the default broil oven temperature of 550°F:

1. Arrange the oven racks when cool. For optimum browning results, preheat oven for 2 minutes before adding food.

2. Position cookware in oven. Close door before broiling.

3. Press Broil.

4. Press

5. Broil on one side until food is browned; turn an broil other side

6. When finished broiling press STOP.

To cancel Broil at any time press STOP.

and turn the oven OFF. If the fire continues, use a fire extin- guisher. DO NOT put water or flour on the fire. Flour may be explosive

START"

until clone to your satisfaction.

Should an oven fire occur, close the oven door

Setting Oven Controls

Figure 31: Broil pan and insert (L) Broil rack positions (R)

Always use pot holders or oven mitts when

using the oven. When cooking, the oven interior, exterior, oven racks and cooktop will become very hot which can cause burns.

Important note:

• Always arrange oven racks when oven is cool. For best results when broiling, use quality broil pan along

with a broil pan insert. A broil pan is designed to drain the fat from food, helping to reduce smoking and avoid splatter.

• When broiling, always pull the oven rack out to the stop position before turning or removing food.

• Cook Time or Delay Start will not operate with the Broil function.

Table 1: Suggested broil settings Food _ack Position

Steak 1" thick Steak 1" thick Steak 1" thick

Pork chops 3/4" thick Chicken (bone in) Chicken (boneless)

Fish Shrimp

Hamburger 1" thick Hamburger 1" thick

Use the off-set rack only in

3th or 6th 3th or 6th 3th or 6th 5th

4th 5th

3th 3th

Sth• 3th

rack position 6.

_etting

_50°F _50°F _50°F _50°F ¢50°F ¢50°F _50°F _50°F _50°F _50°F

Cook Time in minutes

1st side

6 7 8 8

- as directed -

9 7

10 8

4 5 7

2nd side

Doneness

Medium

Medium-well

Well Well

Medium

Well

Setting Oven Controls

Cakes Breads

The Cakes Breads functions are designed to give optimum baking performance for Cakes or Breads. These functions work well for baking cakes, brownies, pies (fresh or frozen), baked custards, cheesecakes, breads, rolls, biscuits, muffins and corn-

bread.

The Cakes function provides a preheat with a gentle cycling of heat giving cakes more volume and allowing delicate foods to cook more evenly.

The Breads function adds a special preheat feature to the bake cycle that thoroughly heats the oven from top to bottom to give more evenly browned foods.

To set the Cakes or Breads features with a default temperature of 350°F:

1. Arrange interior oven racks when cool. Preheat oven as desired and place food in oven.

2. For Cakes, press the Cakes Breads until CAKES appears in the oven control display.

For Breads, press the Cakes Breads until BREADS appears in the oven control display

3. Press

Figure 32: Oven set for Cake baking

START "

Meat Probe

When cooking meat such as roasts, hams or poultry, use the meat probe function to check the internal temperature without any guesswork. For some foods, especially poultry and roasts, testing the internal temperature is the best method to insure properly cooked meats.

Important note:

• Use ONLY the meat probe supplied with appliance. Using any other probe or device may result in damage to appliance and the meat probe receptacle.

• Never leave or store meat probe inside oven. Handle the meat probe carefully when inserting and

removing from food or probe receptacle. Do not use tongs to pull on meat probe cable when inserting or removing from food or receptacle.

• Defrost food completely before inserting meat probe to avoid damaging probe.

• To avoid possibility of burns, after cooking carefully unplug meat probe using a pot holder to protect hands.

Proper meat probe placement: Always insert meat probe so that the probe tip rests in the center

of the thickest part of meat. Do not allow meat probe to touch bone, fat, gristle or cookware.

For bone-in ham or lamb, insert meat probe into the center of lowest large muscle or joint. For dishes such as meat loaf or casseroles, insert meat probe into center of food. When cooking fish, insert meat probe just above the gill.

For whole poultry or turkey, insert meat probe into the thickest part of inner thigh, below the leg (Figure 34).

Figure 33: Oven set for Bread baking Important note:

• Dark or dull pans and glass absorb more heat than shiny bakeware resulting in dark, over browned, or under cooked foods. To prevent this it may be necessary to reduce the oven temperature or cook time of some foods.

• Do not open the oven door too often. Opening the door will reduce the temperature in the oven.

• Breads will have better results baking on a single oven rack.

• Layer cakes will have best results using the Cakes function.

Baking layer cakes with 1 or 2 oven racks For best results when baking cakes or cookies using 2 oven

racks, place cookware on rack in positions 3 and 5 (6 if using the offset oven rack). For best results when baking cakes or cookies using a single oven rack, place offset oven rack in positions 3 or 4.

Figure 34: Probe into thickest part of thigh

Setting Oven Controls

Meat Probe (cont'd)

Important note:

Changing how the oven reacts after reaching the target temper- ature must be done before starting the cooking process.

To set meat probe: probe

1. Prepare the food and properly insert the probe temperature probe into

the food. DO NOT preheat or start cooking

before properly inserting the meat probe. Probe

should be inserted into the food and receptacle

while the oven is still cool.

Place the prepared food on the desired oven rack

position and slide into the

oven.

3. Plug the meat probe into the probe receptacle located on the left front oven cavity side.

When the meat probe is correctly plugged in to receptacle, the probe icon will illuminate in the oven control display.

To set the target temperature press Meat Probe once then enter the desired target internal temperature using the

numer!c key pads (default setting is 170°F/77°C). Press STA_to accept the meat probe target temperature.

Close the oven door.

6. Set the oven control for Bake, Conv Bake or Conv Roast and the desired oven temperature. The meat probe cannot be

set with Broil or Self Clean.

7. During the cooking process the actual meat probe tempera- ture will display by default. To view the target temperature press the Meat Probe once. After 6 seconds the display will show the actual meat probe temperature. If the target temperature needs to be changed during the cooking process, press Meat Probe once and use the numeric keys to

adjust the target temperature. Press ST_'RTto accept any change.

8. The oven control will provide 3 beeps when the internal target temperature is reached. By default the oven will automatically change to a Warm & Hold setting. The Warm & Hold function will maintain the oven temperature

at 170 ° F (77°C). Instructions for changing how the oven reacts after reaching the internal target temperature may

be found later in this section.

9. Press STOP to cancel cooking at any time.

[]

receptacle connector handle

3robe

To set the oven to continue cooking after reaching the probe target temperature:

1. Press Meat Probe and hold for 6 seconds.

2. Press Self Clean and tgqgle until the Continu message appears then press STA_RTto accept.

To set the oven to cancel cooking and automatically start Warm & Hold after reaching the probe target temperature:

1. Press Meat Probe and hold for 6 seconds.

2. Press Self Clean and toggle until CANCEL message appears then press ST_Tto accept.

Figure 35: Probe set to continue cooking

Figure 36: Probe set to cancel cooking

Minimal Internal Cooking temperatures

Internal temperatureFood type

Beef, veal, lamb-roasts, steak & chops

Medium 160°F (71°C)

Well done 170°F (77°C)

Fresh pork-roasts, steaks & chops

Medium 160°F (71°C)

Well done 170°F (77°C)

Ham 160°F (71°C)

Poultry

Whole chicken, turkey 165°F (74°C)

Poultry breasts, roasts 165°F (74°C)

Stuffing (cooked alone or in bird) 165°F (74°C)

Leftovers 165°F (74°C)

Information courtesy the U.S. Department of Agriculture Food Safety and Inspection Service.

The U.S. Department of Agriculture states, "Rare fresh beef is popular, but you should know that cooking it to only 140°F/60°C means some food poisoning organisms may survive." (Source: Safe Food Book, Your Kitchen Guide, USDA Rev. June 1985.) The lowest temperature recommended by the USDA is 145°F/

63°C for medium rare fresh beef.

Setting Oven Controls

Setting Slow Cook

The Slow Cook function may be used to cook foods more slowly and at lower oven temperatures. Slow Cook provides cooking results much the same way as a Slow Cooker or Crock-Pot.

Slow Cook is ideal for roasting beef, pork & poultry. Slow cooking meats may result in the exterior of meats becoming

dark but not burnt. This is normal.

For Slow Cook two settings are available, high (Hi) or low (Lo). The high setting is best for cooking foods from a 4 to 5 hour time period. The low setting is best for cooking foods from a 8 to 9 hour time period.

Some tips for best results when using Slow Cook:

• Completely thaw all frozen foods before cooking with the Slow Cook.

• When using a single oven rack, place in oven rack position 2or3.

• Position multiple racks to accommodate size of cooking utensils when cooking multiple food items.

• Do not open the oven door often or leave the door open when checking foods. If the oven heat escapes often, the Slow Cook time may need to extended.

• Cover the foods to keep them moist or use a loose or vented type cover to allow foods to turn crisp or brown.

• Roasts may be left uncovered so browning can occur. Cook times will vary; depending on the weight, fat content, bone & the shape of the roast.

• Use the recipe's recommended food temperature and a food thermometer to determine when the food is done.

FOOD POISONING HAZARD. Do not let food

To set Slow Cook:

1. Position cookware in oven and close oven door.

2. Press Slow Cook. HI will appear in the display indicating the default temperature setting is for high.

3. If a low setting is needed, press Slow Cook again to select the low setting.

4. Press

To cancel Slow Cook at any time press sToP.

STARTto activate Slow Cook.

Important note=

• Slow Cook may be used with additional settings of Cook Time and Delay Start.

• The maximum cook time for Slow Cook function is 11 hours and 59 minutes unless the control has been changed to the

continuous Bake mode.

• Preheating the oven will not be necessary when using the Slow Cook feature.

• Add any cream or cheese sauces during the last hour of cooking.

Setting Oven Controls

Warm & Hold TM

Warm & Hold will keep cooked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold will shut=off automatically. Warm & Hold should only be used with foods that are already at serving temperatures. Warm &

Hold will maintain the oven temperature at 170 ° F (77°C).

FOOD POISONING HAZARD. Do not let food

To set Warm & Hold:

1. If needed, arrange oven racks and place cooked food in oven.

2. Press Warm & Hold. HLd will appear in the display. If no other keys are touched within 25 seconds the request for

Warm & Hold will clear.

3. Press Warm & Hold will automatically turn off after 3

START "

hours.

To turn Warm & Hold off at any time press

To add Warm & Hold to automatically turn ON after baking 45 minutes with default oven set temperature of 350°F:

1. Press Cook Time.

2. Enter 4 5 using numeric keypad.

3. Press _L to accept.

START

4. Press Bake.

5. Press _ to accept.

START

6. Press Warm & Hold. Hid will appear in the display.

7. Press STARTto accept. When the cook time is over, the Warm & Hold will automatically turn ON. The Warm & Hold function will automatically turn OFF after 3 hours.

Important note=

• Warm & Hold will maintain the oven temperature at 170 ° F

(77°C) for 3 hours.

• Warm & Hold may be set when finished cooking or may be added to automatically turn on after cooking using Cook Time. Delay Start may also be added.

Recipe Recall

Use the Recipe Recall feature to record and recall your favorite baking recipe settings. This feature stores and recalls different recipe settings using Bake, Conv Bake, and Conv Roast Recipe Recall may be programmed for any baking temperature

between 170°F (77°C) to 550°F (288°C).

To store a Bake recipe. The recipe in this example is for a Bake at 325°F with a cook time of 45 minutes:

Press Bake.

Press 3 2 5 using the numeric keys to enter oven tempera- ture.

Press ..........

START] "

Press Cook Time.

Press 4 5 using numeric keys to enter cook time. Press and hold _ until a tone sounds (about 3 seconds).

START

The tone indicate_ that the recipe setting has been recorded for future recall.

Z Press stop.

Important note: The oven will automatically start heating with the recorded recipe unless is pressed at this time.

_o_

To recall recipe stored in the example shown above. Recipe is for bake at 325°F for 45 minutes:

Position cookware in oven and close door.

Press Bake. (If recipe was stored using another cooking

feature press that instead.).

Press _T_ • The oven will begin to cook with the programmed recipe. If Cook Time was previously recorded

this feature will also recall the cooking time. To cancel Recipe Recall at anytime press To erase a stored recipe:

1. Press the function where the recipe is stored and enter

another temperature or default 350F to overwrite existing

temperature.

2. Press ..........

3. Press Cook Time, enter 0 (zero) and hold start key for 3

seconds until you hear the acceptance tone.

4. Press to stop cooking.

Important note.

• The Recipe Recall stores Bake, Conv Bake, Conv Roast,

Slow Cook, Cakes Breads and Preheat settings. This

feature will not work with Delay Start settings.

• If a recalled recipe includes Cook Time the oven will auto-

matically shut-off when the Cook Time is finished.

Setting Oven Controls

Accent Light

Figure 37: Accent light feature located beneath oven controls Your appliance includes a decorative Accent light at the base of

the oven controls panel. The Accent light provides a theatre style intensity feature that slowly increases brightness at turn on and slowly fades when turning off.

When the Accent light is off, the light operates in automatic mode. This means the Accent light will turn on automatically when an oven, cooktop function or feature such as the Timer have been activated. The Accent light will turn off automatically when these functions or features are no longer active.

When the Accent light is OFF, it may be manually turned ON by pressing Accent Light once. When the Accent light has been manually turned on, it will remain on until manually turned off by pressing Accent Light again. The Accent light brightness is adjustable from 0 to 100 percent.

Figure 38: Accent light at highest intensity

Figure 39: Accent light at lowest setting

Operating oven lights

To adjust Accent light brightness:

1. Press and hold Accent Light until an acceptance tone sounds (about 6 seconds).

2. The default brightness setting of 100 will appear in the display (Figure 38).

3. Using the numeric keys, enter any digit from 0 to 100 to change the brightness level. Entering 0 (Figure 39) will effectively turn the Accent light OFF until the brightness level is adjusted to a higher level.

4. Press to save the desired brightness setting.

Note: To check the brightness level after adjusting, press the Accent Light key once. For further adjustment repeat steps 1, 3

and 4 above.

START

The interior oven lights will automatically turn ON when the oven door is opened.

Press L) to turn the interior oven lights ON and OFF whenever the oven door is closed. The oven light will not operate in Self

Clean.

The interior oven lights are located on the rear wall of the oven interior and are covered with a glass shield. The glass shield protects the bulb from high temperatures and should always be in place whenever the oven is in use.

To replace the interior oven light, see Replacing oven lights in the Care & Cleaning section.

Setting Oven Controls

Adjusting oven temperatures

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully.

If you think the oven is cooking too hot or too cool for your recipe times, you may adjust the control so the oven cooks hotter or cooler than the oven temperature displayed.

The oven temperature may be increased as much as +35°F (+19°C) or decreased -35°F (-19°C) from the factory calibrated

settings. To increase (+) or decrease (-) the oven temperature by 20°F:

1. Press and hold Bake until the control provides the 2 audible

tone (about 6 seconds).

2. Enter 2 0 using numeric keypad.

3. Press Self Clean to toggle between plus (+) if increasing

temperature or minus (-) if decreasing the temperature.

4. Press _ to accept change.

Important note.

• Oven temperature adjustments made will not change the

• If the temperature shows an adjustment of -20°F, and a

• DO NOT USE oven thermometers such as those found in

START

Broil or Self Clean function temperatures.

+20°F adjustment is needed, you can toggle between the minus (-) or plus (+) in the display by pressing Self Clean.

grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to

40°F degrees from actual temperatures.

Restoring factory default settings

When new, your appliance left the factory with predetermined oven control settings. Over time, the user may make changes to these default settings. The following options have user settings that may be modified and may have been set with changes since the appliance was new:

• 12 or 24 hour display mode

• Continuous bake or 12-Hour Energy Savings mode

• Silent or audible control

• Oven temperature display (Fahrenheit or Celsius)

• Oven temperature adjustments

• Stored recipes If you choose to restore to factory default

settings, ALL of the above user settings will be restored to factory default settings, the oven temperature offset will reset and any stored recipe information will be cleared.

To restore oven control to factory default settings:

1. Press and hold the 7 key until acceptance tone sounds

(about 6 seconds).

2. Press START"The control has been reset with the default

settings.

The oven temperature adjustment may be made if your oven control has been set to display °C (Celsius) tempera-

tures. Minimum and maximum settings for Celsius is plus (+) or minus (-) 19°C.

Setting Oven Controls

Setting the Sabbath feature (for use on the Jewish Sabbath and Holidays)

For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please visit the web at www.star-k.org.

The Cook Time and Delay Start keys are used to set the Sabbath feature. The Sabbath feature may only be used after

the Bake function is active.

Once the oven is properly set using the Bake function and the Sabbath mode is active, the oven will remain continuously ON

until the Sabbath feature is cancelled. The Sabbath feature will override the factory preset 12-Hour Energy Saving feature and

start the continuous bake mode.

FOOD POISONING HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when finished cooking.

To program oven to Bake with default oven temperature of 350°F and activate the Sabbath feature:

1. Be sure the clock is set with the correct time of day.

2. Arrange oven racks, place cookware in oven and close oven

door.

3. Press Bake.

4. Press _

5. If Cook Time or Delay Start are not needed, skip this step

6. Press and hold both Cook Time and Delay Start keys simul-

START"

and continue to step 6. If a Cook Time or Delay Start are desired enter the times at this point. Refer to the Cook Time and Delay Start sections for detailed instructions.

taneously for about 3 seconds to set the Sabbath feature. Once the feature is set, SAb (Figure 40) will appear in the display indicating the oven is properly set for the Sabbath

feature.

Important note.

It is not advised to attempt to activate any other oven function except Bake while the Sabbath feature is active. ONLY the following keys will function correctly when the

Sabbath feature is active: 0-9 number keys, Bake, and ALL OTHER KEYS should not be used onC= ine

STOP "

Sabbath feature is active.

You may change the oven temperature once baking has started. Press Bake, use the numeric keys to enter the oven

temperature change (170 to 550F °) and press Jewish Holidays only). Remember that the oven control will

no longer provide audible tones or display any further changes when the Sabbath feature is active.

It is recommended that any oven temperature change with the Sabbath feature active be followed with two presses of

the ........._ key. This will insure the oven remains ON even if

START

the atfempt to set the oven temperature was lower or higher than the oven control can accept. If the oven temperature is

set incorrectly, the oven temperature will default to 170°F or 550°1:. Try to set the desired oven temperature again.

If the oven light is needed during the Sabbath, press 9 to turn oven light on before activating the Sabbath feature.

Once the oven light is turned ON and the Sabbath feature is active, the oven light will remain on until the Sabbath

feature is turned OFF. If the oven light needs to be off, be sure to turn the oven light off before activating the Sabbath

feature.

Remember the oven will shut-off automatically after completing a Cook Time, Delay Start or Warm & Hold and therefore may only be used once during the Sabbath/ Jewish Holidays.

If a Delay Start time longer than the default 11 hours and 59 minutes is desired, set the oven control for the 24 hour day display mode setting. For detailed instructions See "Setting 12 or 24 hour display mode".

......._ (for

START

Figure 40: Oven showing Sabbath setting

Setting Oven Controls

Sabbath Feature (cont'd))

To turn the oven off and keep the Sabbath feature active:

Press []

STOP"

To turn off the Sabbath feature:

Press and hold both Cook Time and Delay Start simultaneously for at least 3 seconds to turn the Sabbath feature off. The

control will provide an acceptance tone and SAb will disappear from the display. The oven is no longer programmed for the

Sabbath feature.

What to do during a power failure or power interruption after the Sabbath feature was activated:

Should you experience a power failure or interruption, the oven will shut-off. When power is restored the oven will not turn back on automatically. The oven will remember that it is set for the Sabbath and the oven display will show the message SF for Sabbath failure (Figure 41).

Figure 41: Display showing power failure in Sabbath mode The food may be safely removed from the oven while still in the

Sabbath feature, however the oven cannot be turned back on until after the Sabbath/Holidays. After the Sabbath observance

turn OFF the Sabbath feature. Press and hold both Cook Time and Delay Start keys for at least 3 seconds simultaneously to

turn the Sabbath feature off. SF will disappear from the display and the oven may be used with all normal functions.

Proof Bread (Warmer Drawer)

The warmer drawer has a Proof Bread feature that may be used to prepare bread dough. The recommended length of time to keep fresh or thawed bread dough in the warmer drawer is about 45-60 minutes. Times may vary depending on the dough. Be sure however to follow the recipe's recommended times.

Since the bread dough will nearly double in volume be sure to place the prepared dough in a large bowl. Arrange the warmer drawer rack in the downward position (Figure 42) and place the bowl with dough on the warmer drawer rack.

Figure 42: Warmer drawer rack down for proofing bread To set Proof Bread using warmer drawer:

1. Arrange the warmer drawer rack in warmer drawer and place bread dough in a large bowl on warmer drawer rack.

Close warmer drawer.

2. Press ON-OFF to turn ON warmer drawer.

3. Press Lo once set warmer drawer to Lo power setting.

4. Press Lo again to activate Proof Bread feature. The Proof Bread indicator light will glow when the Proof Bread feature is active (Figure 43).

5. When the bread dough is ready, press ON-OFF to turn the warmer drawer off and remove bread dough from warmer

drawer.

Figure 43:

• PROOF

Warmer

Drawer

BREAD

Lo m

Bread Proof indicator light

Setting Oven Controls

Warmer Drawer

The purpose of the warmer drawer is to keep hot cooked foods at serving temperatures such as vegetables, gravies, meats, casseroles, biscuits, rolls and pastries. It is not recommended to heat cold food in the warmer drawer; always start with hot

food.

The warmer drawer may also be used to warm dinner plates. All food placed in the warmer drawer should be covered with a lid or aluminum foil to maintain quality.

FOOD POISONING HAZARD. Do not let food

Storage in or on appliance_flammable

materials should not be stored in an oven, warmer drawer, near surface units. This includes paper, plastic and cloth items, such as cookbooks, plastic ware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range.

DO NOT LEAVE CHILDREN ALONE --

children should not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or

stand on any part of the appliance, including the warmer drawer.

Arranging warmer drawer rack positions

The keep warmer drawer rack may be used in 2 ways:

• In the upright position (Figure 44) to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish underneath).

• In the downward position (Figure 45) to allow for light weight food items and empty cookware (for example, rolls or pastries and dinner plates) on the rack.

Figure 44: Warmer drawer rack in upright position

_Always use pot holders or oven mitts when removing food from the warmer drawer as cookware and plates will be hot and you can be burned.

Important note.

The warmer drawer is equipped with a catch that may require extra force to open and close the drawer.

Figure 45: Warmer drawer rack in downward position

Setting Oven Controls

Warmer Drawer Controls

The warmer drawer control is located on the left side of the control panel. Use the warmer drawer control key to turn ON

and OFF and make temperature adjustments. Available temper- ature settings are approximate, and are designated by Lo, Med, and Hi (Figure 47). If needed, refer to Warmer drawer recom- mended food settings provided in this section.

Warmer drawer indicator light The warmer drawer indicator light is located beside the ON-

OFF key (Figure 46). It glows when the warmer drawer is turned ON, and remains on until the warmer drawer is turned OFF

Warmer

\1/

_e_ indicator

Warmer

Drawer

Figure 46: Warmer drawer indicator light To set warmer drawer:

1. Arrange the warmer drawer rack (if needed) in the warmer

drawer and place the cooked food or dishes in the warmer drawer. Close warmer drawer.

2. Press @.

3. Press Hi Lo key to toggle to the desired temperature setting.

Release when the desired temperature setting is displayed by the indicator lights. (Figure 47).

4. Once warming is finished, press _ to turn OFF and

carefully remove items from warmer drawer.

__lAIways use potholders or oven mitts when

removing food from the warmer drawer as cookware and plates will be hot and you can be burned.

®.

Lo m

drawer light

Hi !

ko !

! m m

Warmer Drawer settings

The recommended warmer drawer food settings shown are meant to be used as a recommendation only. If a particular food item is not listed, start with the Med setting. If more crispness is desired, remove the lid or aluminum foil from the

food.

Most foods may be maintained at serving temperatures on the Med setting. When a combination of foods are to be kept warm (for example, a meat with 2 vegetables and rolls) use the Hi setting. To minimize heat loss, avoid opening the warmer drawer frequently while in use.

Warmer drawer recommended food settings

Food Item Setting Bacon Hi Hamburger patties Hi

Poultry Hi Pork chops Hi

Fried food Hi Pizza Hi

Gravies Med Casseroles Med

Eggs Med Roasts (beef, pork, or lamb) Med Vegetables Med

Biscuits Med Roils (hard) Med

Pastries Med Rolls (soft) Lo

Empty dinner plates Lo

Important note.

• Do not use plastic wrap to cover food. Plastic may melt onto the drawer and be very difficult to clean up. Use only utensils and cookware recommended by the manufacturer

for use a warmer drawer.

• Always start with hot food when using the warmer drawer. DO NOT heat cold food in the warmer drawer.

• Self Clean can not be set when the warmer drawer is active.

Warmer

Drawer

Figure 47: Setting desired temperature in warmer drawer

Warmer

Drawer

Warmer

Drawer

Setting Oven Controls

Removing and replacing warmer drawer

Electrical shock hazard can occur and result in

serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer drawer.

To remove the warmer drawer.-

1. Turn power OFF to the appliance before removing the warmer drawer.

2. Open the warmer drawer completely.

3. On left warmer drawer rail, locate black release lever and press up with finger while pulling out slightly on the oven drawer handle. On right warmer drawer rail, locate black release lever and press down with finger while pulling out slightly on the warmer drawer handle (Figure 48).

4. The warmer drawer should now be released from the rails. Remove warmer oven drawer (using level & square motion)

completely out and away from the appliance.

To replace the warmer drawer:

Left-hand rail and release

Warmer drawer -- handle

\ u

,<,

1. Pull the bearing glides to the front of the outer compart- ment glide channels until they snap into place (Figure 50).

2. Carefully line up both sides of the warmer drawer glide rails to the outer compartment glide channels located inside the empty warmer drawer compartment (Figure 49).

While holding the warmer drawer level and square using the warmer drawer handle, push (do not force) the warmer drawer all the way into the outer compartment glide channels all the way into the range. Open the warmer drawer again to verify the glides have seated.

If you do not hear the levers click into place or the bearing glides do not feel seated remove the warmer drawer and repeat steps 1 through 3. This will minimize possible damage to the bearing glides.

Right-hand rail and release

Figure 48: Warmer drawer releases

Figure 49: Warmer drawer channels

Figure 50: Warmer drawer glides

Setting Oven Controls

Self Clean

A self-cleaning oven cleans itself with high temperatures that are well above normal cooking temperatures. The high cleaning temperature eliminates soils completely or reduces them to a fine powdered ash you can wipe away afterwards with a damp

cloth.

The Self Clean function allows you to set any amount of cleaning time from 2 hours to 4 hours. A 3-hour cleaning time is best used for normal cleaning; 2-hour time for light soils and a

4-hour clean time for heavier stubborn soils.

Read before starting Self Clean Be sure to read all the following caution and important state-

ments BEFORE starting the self-cleaning cycle:

DO NOT leave small children unattended near the appliance. During the self-cleaning cycle, the outside of the range can become very hot to touch and can cause burns.

DO NOT line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior. Aluminum foil will melt

to the interior of the oven.

The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT force the oven door open. This can damage the automatic door locking system.

Use caution when opening the oven door after self-cleaning. The oven may still be VERY HOT and can cause burns. Toavoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

Important note.

Completely remove ALL OVEN RACKS and ANY ACCESSORIES FROM OVEN CAVITY to avoid damage to oven racks. If the oven racks are not removed they may discolor.

Remove ALL items from the oven and cooktop including cookware, utensils and ANY ALUMINUM FOIL. Aluminum foil will not withstand high temperatures from a self-clean cycle and will melt.

DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom (Figure 51). These areas heat sufficiently to burn soil on. Clean using soap and water prior to starting

Self Clean.

Remove any excessive spill overs. Any spills on the oven bottom should be wiped-up and removed before starting a self-clean cycle. To clean, use hot, soapy water and a cloth. Large spill overs can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may leave a dull spot even after cleaning.

DO NOT clean the oven door gasket (Figure 51). The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket. DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage to the door gasket.

Figure 51: Areas to clean and to avoid

1. Be sure the oven is empty and ALL oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.

2. Press Self Cleon for a default 3-hour clean time. After pressing Self Clean you may accept the default 3-hour

clean time by going to step 3. At this time you may choose a different clean time. The amount of clean time must be

within 2 to 4 hours and entered using the numeric keys pads. Enter 2 0 0 for a 2-hour time or enter 4 0 0 for a 4- hour self-clean time. You may choose a 2 hour 15 minute clean time by entering 2 1 5 (hours and minutes).

3. Press to activate Self Clean.

START

Setting Oven Controls

Setting Self Clean (cont'd.)

As soon as Self Clean becomes active, a motor driven lock mechanism will begin locking the oven door automatically, door Loc will appear in the display (Figure 52). DO NOT open the oven door when door Loc is displayed (allow 15 seconds for the lock mechanism to lock the oven).

Once the oven door has locked, CLn will appear in the display indicating Self Clean has started (Figure 53).

Figure 52: Door locking Figure 53: Oven in clean mode

Figure 54: Oven too hot for Figure 55: Door opens when door to unlock oven has cooled

When Self Clean is finished

1. CIn message will turn off and Hot will appear in display window (Figure 54).

2. Once the oven has cooled down (about 1 hour) and Hot is no longer displayed, the door Opn message will appear (Figure 55). When this message turns off the oven door may be opened.

Use caution when opening the oven door after

self-cleaning. The oven may still be VERY HOT and can cause burns. To avoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

3. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper

towel.

Important note.

The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the 1st self- clean cycle to help eliminate the normal odors associated with the 1st self-clean cycle.

When the clean time finishes the oven door will remain locked until the range has cooled sufficiently. In addition to

the clean time that was programmed, you must allow about 1 additional hour for the oven to cool before you will be able to open the oven door.

The Self Clean function will not operate whenever a radiant surface element is ON or the oven lockout is active.

Setting Delay Start Self Clean

To start a delay Self Clean with default clean time of 3 hours and a start time of 9:00 o'clock:

1. Be sure the clock is set with the correct time of day, the oven is empty and ALL oven racks are removed. Be sure oven door is completely closed.

2. Press Delay Start.

Using numeric keypad enter 9 00.

Press to accept.

STAK[

Press Self Clean. Press

START"

If it becomes necessary to stop Self Clean when active:

1. Press s_p •

2. If Self Clean has heated the oven to a high temperature, allow enough time for the oven to cool and the door Opn message to appear (Figure 55). When this message turns OFF the oven may be opened.

Before restarting Self Clean, be sure to read important notes below.

Important note.

• When Self Clean function is active you may check the amount of clean time remaining by pressing Self Clean

once.

If your control is set with the default 12 hour display mode, the Delay Self Clean can only be set to start up to 11 hours and 59 minutes in advance. To set a Delay Start Self Clean to begin 12 or more hours (maximum is 23 hours and 59 minutes) in advance, be sure to set the control for 24 hour display mode.

If Self Clean was active and then interrupted by a power failure or cancelled before the oven was thoroughly cleaned, it may be necessary to run another self-clean cycle again. If the oven temperature was high enough when inter- rupted your oven control may not allow another self-clean cycle to be set for up to 4 hours after the interruption.

Setting Oven Controls

Steam Clean

Steam cleaning works best for spot cleaning and light soils on the oven bottom. Steam clean may also be used before manu-

ally cleaning the oven or before Self Clean to help loosen soils on the oven bottom.

Do not set the cleaning temperature higher

than the temperature listed in these instructions. Higher tem-

peratures will dry the steam too soon and may lead to burns or serious injury when cleaning.

_Do not attempt to wipe out the oven before the cooling off period or attempt to shorten the cooling off

period. Doing so may lead to burns or other serious injury when cleaning.

Do not add ammonia, oven cleaners, or any

other household cleaners or chemicals to the water used for steam cleaning.

To set the controls for steam clean:

1. Oven should be at room temperature. Remove all racks

and oven accessories.

2. Scrape or wipe loose debris from the oven bottom.

3. Pour 8 oz (235 ml) distilled or filtered water onto the oven bottom (Figure 56). Close the oven door.

10.

An alert will sound when the timer is finished. Press Timer

Set/Off to stop the timer and press _o_ to return to the

clock.

11.

Stand to the side of the range out of the way of escaping vapor when opening the oven door.

12.

Wipe oven cavity and bottom. Do not clean oven door gas- ket (Figure 57).

Fig. 57 Do not clean the oven door gasket

To stop the steam cleaning cycle at any time, press !

STOP •

Fig. 56

Pour water onto the oven bottom

Press Bake.

Enter 170°F (77°C) using the arrow keys or the numeric key- pad and press START.

Set the minute timer for 10 minutes.

Allow the oven to heat. Do not open the oven door while the oven is heating.

An alert will sound when the timer is finished. Press Timer

Set/Off to stop the timer and press to return to the

clock.

Set the minute timer for 10 minutes to allow for a cool-down period. Do not attempt to wipe out the oven before a 10

minute cool-down period.

Important notes:

• Always stay close to the oven when steam cleaning, so you can hear the timer alert.

For best results, wipe out oven immediately after the cool- down period is complete.

Removal of especially stubborn or baked-on soils may require a manual cleaning or a self clean cycle. See instructions in the "Self Clean" and "General Cleaning"

sections.

• Some condensation or water vapor may appear close to the oven vent, and some water may remain on the oven bottom. This is normal. Wipe with a soft cloth or sponge when the cool-down period is complete.

• The oven gasket may become damp; do not wipe dry. Open door to broil position and allow to air dry.

• Local water sources often contain minerals (hard water) and will leave deposits on the oven cavity surfaces. If this occurs, wipe cavity surfaces with diluted vinegar or lemon juice.

Use distilled or filtered water.

If the door is opened during steam cleaning or cool-down period, steam will escape and the oven may be more difficult to clean. Keep oven door closed during steam cleaning.

Care and Cleaning

Cleaning Various Parts of Your Oven

Before cleaning any part of the oven, be sure all controls are turned off and the oven iscool. Remove spills and any heavy soiling as soon as possible. Regular cleaning will reduce the difficulty of major cleaning later.

Surface Type Recommendation

Aluminum and Vinyl •

Painted body parts • Painted decorative trims

Easy Clean TM Stainless Steel

Porcelain enamel broiler pan and insert (available by mail order)

Door liner and body parts

Oven racks • Oven racks must be removed from oven cavity. Clean by using a mild, abrasive cleaner

Oven door • Use soap and water to thoroughly clean the top, sides, and front of the oven door. Rinse

Use hot, soapy water and a cloth. Dry with a clean cloth.

Use a soft cloth and clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first.

Do not spray liquids directly on the oven control and display area. Do not use large amounts of water on the control panel. Excess water on the control area may cause damage to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring

pads, or paper towels. They will damage the finish. Your oven finish may be Easy Clean TM Stainless Steel (some models). Clean the stainless

with warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a soft clean cloth. Do not use any store bought cleaners like stainless steel cleaners or any other types of cleaners containing any abrasive, chlorides, chlorine, or ammonia.

It is recommended to use mild dish soap and water or a 50/50 solution of water and vinegar.

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged during future heating.

following manufacturer's instructions. Rinse with clean water and dry.

well. You may use a glass cleaner on the outside glass of the door. Do not immerse the door in water. Do not spray or allow water or the glass cleaner to enter the door vents.

Do not use oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the outside of the oven door.

• Do not clean the oven door gasket. On self-clean models, the oven door gasket is made

of a woven material which is essential for a good seal. Care should be taken not to rub, damage, or remove this gasket.

Cleaning the cooktop and surface burners

To avoid possible burns DO NOT attempt any

of the cleaning instructions provided below before turning OFF all of the surface burners and allow them to cool.

Any additions, changes or conversions required

in order for this appliance to satisfactorily meet the application needs must be made by an authorized qualified Agency.

Routinely clean the cooktop. Wipe with a clean, damp cloth and wipe dry to avoid scratches. Keeping the surface burner head ports and slots clean will prevent improper ignition and an uneven flame. See the following sections for more instructions.

To clean recessed and contoured areas of cooktop

If a spill occurs on or in the recessed or contoured areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.

To clean burner grates

• Clean when the grates are cool.

• Use nonabrasive plastic scrubbing pad and mild abrasive

cleanser.

• Food soils containing acids may affect the finish. Clean

immediately after the grates are cool.

• Thoroughly dry grates immediately following cleaning.

To clean burner caps

• Remove caps from burner heads after they have cooled.

• Clean heavy soils with a plastic scrubbing pad and

absorbent cloth.

• Thoroughly dry burner caps immediately following cleaning

including the bottom and inside of cap.

• Do not use abrasive cleaners. They can scratch porcelain.

• Do not clean burner caps in the dishwasher.

• Do not operate surface burners without burner caps

properly in place. See IMPORTANT notes below.

Care and Cleaning

i!)i;

slots

ignition port

Figure 58: Cooktop burner head

To clean the surface burner heads

For proper gas flow it may be necessary to clean the burner head and slots. To clean, first use a clean DAMP cloth to soak up any spills. Remove any food from between the burner slots using

a small nonabrasive brush like a toothbrush and afterwards wipe up using a damp cloth. For stubborn soils located in the

slots, use a small-gauge wire or needle to clean. Any spill on or around the electrode must be carefully cleaned.

Take care not to hit the electrode with any thing hard or it could be damaged.

To clean the burner head ignition ports Each burner head has a small ignition port located as illus-

trated. Should you experience ignition problems it may be that this port hole is partially blocked with soil. With the burner head in place, use a small wire gauge needle or the end of a paper clip to clear the ignition port (refer to Figure 58; round style shown; oval models on some models not shown).

Important: Always keep the surface burner caps in place whenever a surface burner is in use.

When replacing the burner caps, be sure the burner caps are seated firmly on top of the burner heads.

The surface burner heads are secured to the cooktop and must be cleaned in place on the cooktop. For proper flow of gas and ignition of burners.

DO NOT allow spills, food, cleaning agents or any other material to enter the gas orifice holder opening.

Care and Cleaning

General Cleaning

Refer to the Cleaning recommendation information in the Care and Cleaning section for more details about cleaning specific parts of the range.

Before manually cleaning any part of the range,

be sure all controls are turned of and the range is cool. The range may be hot and could cause burns.

Ammonia must be rinsed before operating the

oven. Provide adequate ventilation.

Aluminum foil and utensils

NEVER cover any slots, holes, or passages in

the oven bottom and never cover an entire oven rack with materials such as aluminum foil.

Doing so blocks the air flow through the oven and may cause

CARBON MONOXIDE poisoning. Aluminum foil linings may trap heat and cause a fire hazard.

Aluminum foil - Use of aluminum foil on a hot cooktop can

damage the cooktop.

• Do not use thin aluminum cooking utensils or allow

aluminum foil to touch the surface burners under ANY circumstances.

Replacing the oven light

Be sure the oven is unplugged and all parts are

cool before replacing oven light. The interior oven lights are located at the upper left and right

corners at the rear of the oven cavity. (See Figure 59). To replace the oven interior light bulbs: Important note:

Use a paper towel or cotton glove while handling the new bulb when installing.

1. Turn electrical power off at the main source or unplug the appliance.

2. Replace bulb with a new 40 watt appliance bulb.

3. Turn power back on again at the main source (or plug the appliance back in).

4. Be sure to reset the time of day on the clock.

Aluminum utensils - The melting point of aluminum is much lower

than that of other metals. Care must be taken when aluminum pots or pans are sued on the cooktop.

If aluminum pans are allowed to boil dry when using the cooktop, the cookware may be damaged or destroyed.

Figure 59: Replacing oven light

Removing and Replacing the Oven Door

The door is heavy. For safe, temporary storage,

lay the door flat with the inside of the door facing down. To remove the oven door:

1. Open oven door completely, horizontal with floor (See Figure 60).

Pull the door hinge locks on both left and right door hinges down from the oven frame completely toward the oven door (See Figure 61). A tool such as a small flat-blade screwdriver may be required.

3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 62).

4. Close the door to approximately 10 degrees from the oven door frame.

5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 62).

To replace oven door:

1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 62).

Holding the oven door at the same angle as the removal position (See Figure 62), seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 63). The hook of the hinge arms must be fully seated onto the roller pins.

3. Fully open the oven door, horizontal with floor (See Figure 60).

4. Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 61).

5. Close the oven door.

Figure 60: Door hinge location

Figure 61: Door hinge locks

door -

oven

Care and Cleaning

Oven door hinge

locations

10o

hinge

Important: Special Door Care Instructions:

• Most oven doors contain glass that can break.

• Do not close the oven door until all the oven racks are fully in place.

Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage

at a later time.

Figure 62: Holding door for removal

roller

hinge

arm

Figure 63: Location of hinge arm and roller pin

Before You Call

Oven Baking

For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles.

The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.

Baking Problems and Solutions

Baking Problems

Cookies and biscuits burn on the bottom.

Causes Corrections

Cookies and biscuits put into oven before the preheating time is completed.

Oven rack is overcrowded.

Dark pans absorbs heat too fast.

Allow oven to preheat to desired temperature before

placing food in oven.

Choose pan sizes that permit 2" to 4" of air space (5.1 cm to 10.2 cm) on all sides when placed in the oven.

Use a medium weight baking sheet.

Cakes too dark on top or bottom

Cakes not done in center

Cakes not level.

Foods not done when cooking time is over.

Cakes put in oven before preheating time is completed.

Rack position too high or too

lOW.

Oven too hot.

• Oven too hot.

• Incorrect pan size.

• Pan not centered in oven.

• Oven not level.

• Pan too close to oven wall or rack overcrowded.

• Pan warped.

• Oven too cool.

• Oven overcrowded.

• Oven door opened too frequently.

Allow oven to preheat to the selected temperature before

placing food in the oven.

• Use proper rack position for baking needs.

• Set oven temperature 25°F/13°C lower than recommended.

• Use pan size suggested in recipe.

• Use proper rack position and place pan so there is 5.1 cm to

10.2 cm (2" to 4") of space on all sides of pan.

Place a marked glass measuring cup filled with water on

the center of the oven rack. If the water level is uneven,

refer to the installation instructions for leveling the oven. Be sure to allow 5.1 cm to 10.2 cm (2" to 4") of clearance

on all sides of each pan in the oven.

• Do not use pans that are dented or warped.

• Set oven temperature 25°F/13°C higher than suggested and bake for the recommended time.

• Be sure to remove all pans from the oven except the ones to

be used for baking.

• Open oven door only after shortest recommended baking time.

Before You Call

Solutions to Common Problems

Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the problem listed:

Problem Solution

Poor baking results

Oven does not operate.

Oven light does not work. • Be sure the oven light is secure in the socket. See "Replacing the oven light" on page 38.

Flames inside oven or smoking from • Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity. Wipe oven vent. up excessive spills before starting oven. If flames or excessive smoke are present when

Self clean does not work. • Oven control not set properly. Review "Self Clean" on page 33.

Oven racks discolored or do not • Oven racks left in oven cavity during self clean. Always remove oven racks from oven slide easily, cavity before starting a self-clean cycle. Clean using a mild abrasive cleaner following

Oven smokes excessively when • Incorrect setting. Follow broiling instructions in "Setting Broil" on page 21 broiling. •

Oven control panel beeps and displays any F or E code error.

Many factors effect baking results. Use proper oven rack position. Center food in the oven and space pans to allow air to circulate. Preheat oven to the set temperature

before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time. See "Self Clean" on page 33 if you feel the oven is too hot or cold.

• The time of day is not set. The oven clock must first be set in order to operate the oven. Be sure oven controls are set properly. See "Setting the Clock" on page 15 and review

instructions for the desired cooking function in this manual.

• Service wiring is not complete.

using broil, see "Setting Broil" on page 21.

manufacturer's instructions. Rinse with clean water, dry, and replace in oven.

Meat too close to the broil element. Reposition broil rack to provide proper clearance

between the meat and broil element. Remove excess fat from meat. Cut remaining fatty

edges to prevent curling. Grease build up on oven surfaces. Regular cleaning is necessary when broiling

frequently. Grease or food splatters will cause excessive smoking. Oven control has detected a fault or error condition. Press STOP to clear the error code.

Try bake or broil function. If the F or E code error repeats, turn off power to appliance, wait 5 minutes and then repower appliance. Set clock with correct time of day. Try bake or broil function again. If fault recurs, press STOP to clear.

Soil not completely removed after self clean.

• Self Clean was interrupted. Review instructions in "Self Clean" section on page 33.

• Excessive spills on oven bottom. Clean before starting self clean.

Failure to clean soil from the oven frame, the door liner outside the oven door gasket,

and the small area at the front center of the oven bottom. These areas are not in the self-cleaning area, but they get hot enough to burn on residue. Clean these areas before

starting the self-cleaning cycle. Burned-on residue can be cleaned with a stiff nylon

brush and water or a nylon scrubber. Be careful not to damage the oven gasket.

Master Protection Agreements

Congratulations on making a smart purchase, Your new Kenmore ® product is designed and manufactured for years of dependable operation.

But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can

save you money and aggravation. The Master Protection Agreement also helps extend the life of your new

product. Here's what the Agreement* includes: [] Parts and labor needed to help keep products operating properly

under normal use, not just defects. Our coverage goes well beyond the product warranty. No deductibles, no functional failure

excluded from coverage - real protection.

[] Expert service by a force of more than 10,000 authorized Sears

service technicians, which means someone you can trust will be working on your product.

[] Unlimited service calls and nationwide service, as often as you

want us, whenever you want us.

[] "No=lemon" guarantee- replacement of your covered product if

four or more product failures occur within twelve months.

[] Product replacement if your covered product can't be fixed. [] Annual Preventive Maintenance Check at your request - no extra

charge.

[] Fast help by phone - we call it Rapid Resolution - phone support

from a Sears representative on all products. Think of us as a "talking

owner's manual".

[] Power surge protection against electrical damage due to power

fluctuations.

[] $250 Food Loss Protection annually for any food spoilage that is

the result of mechanical failure of any covered refrigerator or freezer.

[] Rental reimbursement if repair of your covered product takes

longer than promised.

[] 25% discount off the regular price of any non-covered repair

service and related installed parts.

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.

The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master Protection Agreement today!

Some limitations and exclusions apply, For prices and additional information in the U.S.A. call 1=800=827=6655.

* Coverage in Canada varies on some items. For full details call

Sears Canada at 1=800=361 =6665. Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. or

Canada call 1=800=4=MY=HOME ®,

Acuerdos maestros de protecci6n Enhorabuena por haber hecho una compra inteligente, Su nuevo

producto Kenmore®est_, disedado y fabricado para brindarle ados de funcionamiento liable. Pero, como cualquier producto, puede necesitar

mantenimiento preventivo o reparaciones peri6dicas. Es por eso que tener un Acuerdo maestro de protecci6n podrfa ahorrade dinero y

molestias. El Acuerdo maestro de protecci6n tambi6n sirve para prolongar la

durabilidad de su nuevo producto. El acuerdo* incluye Io siguiente: [] Piezas y mano de obra necesarias para contribuir a mantener el

funcionamiento adecuado de los productos utilizados en condiciones normales de uso, no s61o en case de defectos de los

productos. Nuestra cobertura va mucho m_s all& que la garantia del producto. No se aplican deducibles ni exclusiones por fallas del

funcionamiento: es decir, verdadera protecci6n.

[] Servicio t_cnico pot expertos (mAs de 10000 t_cnicos

autorizados de Sears), Io cual significa que quien repare o realice el mantenimiento de su producto sera un profesional de confianza.

[] Servicio t_cnico a escala nacional y n_mero ilimitado de

llamadas de solicitud de servicio t_cnico: se puede poner en contacto con nosotros cuantas veces Io desee y cuando Io desee.

[] Garantia "sin sorpresas': se reemplaza el producto cubierto per el

acuerdo si ocurren cuatro o mAs fallas del producto en un periodo de 12 meses.

[] Reemplazo del producto: en caso de que no se pueda reparar el

producto cubierto por el acuerdo.

[] Revisi6n anual preventiva de mantenimiento del producto:

puede solicitada en cualquier memento, sin costo alguno.

[] R_pida asistencia telef6nica, la cual denominamos Soluci6n

r_pida: es decir, asistencia telef6nica a trav_s de cualquiera de nuestros representantes de Sears, sobre cualquiera de nuestros

productos. Piense en nosotros como en un "manual padante del usuario".

[] Protecci6n contra fallas el_ctricas, contra dados debidos a

fluctuaciones de la corriente el_ctrica.

[] $250 al a_o para cubrir cualquier posible deterioro de

alimentos que haya tenido que desechar debido a una falla mecAnica de cualquiera de nuestros refrigeradores o congeladores cubiertos por este acuerdo.

[] Devoluci6n de gastos de alquiler de electrodom_sticos si la

reparaci6n de su producto asegurado toma mAsque el tiempo prometido.

[] 25% de descuento aplicable tanto a los costos del servicio de

reparaci6n, come de las piezas instaladas relacionadas que no hayan quedado cubbrtos pot este acuerdo.

Una vez que haya realizado empago de este acuerdo, bastara una simple Ilamada telef6nica para concertar una visita de servicio. Puede Ilamar a

cuaiquier hora demdia o de manoche, o bien concertar una visita de servicio por Internet.

La adquisici6n del Acuerdo maestro de protecci6n es una inversi6n exenta de desgos. Si por cualquier motivo decide cancelar dicho acuerdo durante el periodo de garantia del producto, le haremos un reintegro total del valor. O bien un importe proporcional si cancela el acuerdo en

cualquier otro momento posterior al vencimiento del periodo de garantia del producto, iAdquiera hoy mismo su Acuerdo maestro de protecci6n!

AIgunas limitaciones y exclusiones podrian aplicarse. Para solicitar precios e informacibn adicional, llame al 1=800=827=6655 (en los

EE.UU.). * La cobertura en Canad_ varia en el caso de algunos articulos. Para

obtener detalles completos al respecto, Ilame al 1=800=361=6665 de Sears de Canada.

Servicio de instalaci6n de Sears Para soticitar la instalacidn por profesionales de Sears de

electrodomesticos, abridores de puertas de garaje, calentadores de agua y otros articulos de uso prioritario en el hogar, Ilame al 1=800=4=MY=

HOME en los EE.UU. o CanadA.

®RegisteredTrademark/ TMTrademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries

® Marca Registrada / TMMarca de Fabfica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros paises MCMarque de commerce / MDMarque ddpos_e de Sears Brands, LLC

Kenmore 790.7535, 790.7534, 7534, 790.7533 Use & Care Manual

Specifications and Main Features

Frequently Asked Questions

User Manual