Kenmore 72137060700 Owner’s Manual
Use and Care Guide
Guia de Uso y Cuidado
Premalite '°
Vacuum Cleaner
Premalite TM
Aspiradora
Model/Modelo: 721.37060
®
CAUTION: Read and follow
all safety and operating
instructions before first
use of this product.
CUlDADO: Lea y sigue
todas las instrucciones de
operaci6n y seguridad
antes del uso de este
producto.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
Part No.: MFL37631501 7/07 Printed in China * Impreso en China
Directions for Use
It is a violation of Federal law
to use this product in a manner
inconsistent with its labeling.
Direcciones de uso
Es una violacion a la ley Federal
utilizar este producto de una manera
contraria con su etiquetado.
Kenmore Vacuum
Cleaner Warranty ............................ 2
Before Using Your New
Vacuum Cleaner .............................. 3
Important Safety Instructions _..3, 4
Parts and Features ........................ 5
Assembly ...................................... 6-8
Unpacking the Vacuum Cleaner ......6
Installing the Hose ............................ 6
Attaching the Wand/Handle .............. 7
Cord Storage .................................... 8
Accessory Storage ............................ 8
Operation .................................... 9-14
Switch Operation .............................. 9
Handle Tilt Release Operation .......... 9
Adjusting the Nozzle Height ............ 10
Tips and Tricks ................................ 11
Attachments and Use Chart ............ 11
Using the Wand or Wand Handle ..12
Installing Attachments .................... 13
Agitator Motor Overload
Protection ........................................ 14
Thermal Overload Protection .......... 14
LED Headlight ................................ 14
Care and Cleaning .................. 15-21
Storing the Vacuum Cleaner .......... 15
Dust Bin Components .................... 15
Emptying the Dust Bin .................... 16
Cleaning the Dust Bin and
Screen Filter .................................... 16
Cleaning the Foam Pre-Filter .......... 17
Replacing the HEPA Filter .............. 17
Pet Handi Mate ®............................. 18
Agitator Maintenance ................ 18, 19
Replacing the Agitator Belt .............. 19
Removing Clogs .............................. 20
Cleaning the Exterior of the
Vacuum Cleaner .............................. 21
Troubleshooting ...................... 21, 22
Master Protection Agreements __23
Customer Service ........ Back Cover
ONE YEAR LIMITED WARRANTY
When assembled, operated, and maintained according to all instructions supplied with this product, if the
appliance fails due to a defect in material or workmanship within one year from the date of purchase, return
it to any Sears store, Sears Parts & Repair Center, or other Kenmore outlet for repair.
tf this appliance is used for other than private family purposes, this warranty applies for only 90 days from
the date of purchase.
This warranty covers only defects in material and workmanship.
Sears will NOT pay for:
1. Expendable items that can wear out, including but not limited to filters, belts, light bulbs, and bags
2. A service technician to instruct the user in correct product assembly, operation, or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not assembled, operated, or maintained according to all
instructions supplied with this product.
5. Damage to or failure of this product resulting from accident, abuse, misuse, or use for other than its
intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals, or utensils
other than those recommended in all instructions supplied with this product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies:
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided
herein. Implied warranties of merchantability or fitness for a particular purpose are limited to one year or the
shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some
states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or
limitations may not apply to you.
This warranty applies only while this appliance is used inthe United States or Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state or province to province.
Sears Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
Please read this guide. It will help you assemble and operate your new Kenmore
vacuum cleaner in the safest and most effective way.
For more information about the care and operation, call your nearest Sears store.
You will need the complete model and serial numbers when requesting information.
Your vacuum cleaner's model and serial numbers are located on the Model and
Serial Number Plate. Use the space below to record the model number and serial
number of your new Kenmore vacuum cleaner.
Model No.:
Serial No.:
Date of Purchase:
Keep this Use and Care Guide and your sales receipt in a safe place for
future reference.
:: WARNING
Your safety is important to us. To reduce the risk of fire, electric shock,
injury to persons, or damage when using your vacuum cleaner, follow
basic safety precautions including the following:
• READ THIS MANUAL BEFORE
ASSEMBLING OR USING YOUR
VACUUM CLEANER.
• Use your vacuum cleaner only as
described in this manual. Use only with
supplied attachments.
• To reduce the risk of electric shock, do
NOT use outdoors or on wet surfaces.
• Disconnect electrical supply before
servicing or cleaning out brush area.
Failure to do so could result in electric
shock or brush suddenly starting.
• Always turn vacuum cleaner off before
connecting or disconnecting the hose.
• Always turn vacuum cleaner off before
unplugging.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not use with damaged cord or plug.
If vacuum cleaner is not working as it
should, has been dropped, damaged,
left outdoors, or dropped into water,
return it to a Sears Parts & Repair
Center.
Do not pull or carry by cord, use cord as
a handle, close door on cord, or pull
cord around sharp edges or corners. Do
not run vacuum cleaner over cord. Keep
cord away from heated surfaces.
Do not leave vacuum cleaner when
plugged in. Unplug from outlet when not
in use and before servicing.
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do not handle plug or vacuum cleaner
with wet hands.
• Do not put any object into openings.
• Do not use with any opening blocked;
keep free of dust, lint, hair, and anything
that may reduce air flow.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• Do not use vacuum cleaner without dust
bin and/or filters in place.
• Always clean dust bin after vacuuming
carpet cleaners or freshener, powders,
and fine dust. These products clog the
filter, reduce airflow, and can cause
damage to the vacuum cleaner. Failure
to clean the dust bin could cause
permanent damage to the vacuum
cleaner.
• Do not use the vacuum cleaner to pick
up sharp hard objects, small toys, pins,
paper clips, etc. They may damage the
vacuum cleaner or dust bin.
• Do not pick up anything that is burning
or smoking, such as cigarettes,
matches, or hot ashes.
• Do not use vacuum cleaner to pick up
flammable or combustible liquids
(gasoline, cleaning fluids, perfumes,
etc.), or use in areas where they may
be present. The fumes from these
substances can create a fire hazard
or explosion.
• Use extra care when cleaning on stairs.
Do not put on chairs, tables, etc. Keep
on floor.
• You are responsible for making sure
that your vacuum cleaner is not used by
anyone unable to operate it properly.
• WARNING: The cords, wires, and/or
cables supplied with this product
contain chemicals, including lead or
lead compounds, known to the state of
California to cause cancer and birth
defects or other reproductive harm.
Wash hands after using.
Proper assembly and safe use of your vacuum cleaner are your responsibilities.
Your vacuum cleaner is intended only for household use. Read this Use and Care
Guide carefully for important use and safety information. This guide contains safety
statements under WARNING and CAUTION symbols. Please pay special attention
to these boxes and follow any instructions given. WARNING statements alert you to
such hazards as fire, electric shock, burns, and serious personal injury. CAUTION
statements alert you to such hazards as moderate personal injury and/or
property damage.
- SAVE THESE INSTRUCTIONS-
It is important to know your vacuum cleaner's parts and features to assure its
proper and safe use. Review these before using your vacuum cleaner.
Common Replacement Parts
_e Part No. in U.S.A.
Filter ADQ33064201
Pre-Filter MDJ37614401
r Belt MAS37628301
Note: Common replacement parts are available through
Sears Parts at 1-800-488-1222.
Handle
Wand
Dust Bin
Dusting/
Upholstery Tool
Accessory Tools /Crevice Tool
Pet Handi Mate ®
Handle Release
Button
Carpet Height Power Level
Indicators Indicators
LED Headlight
Agitator
Bin
Carry Handle
30
On-Board
Tool Storage
Handle Release
Pedal
Height
Adjustment
Pedal
Quick
Release
Cord
Hanger
Bottom
Plate
Release
Button
To reduce the risk of shipping damage, your vacuum cleaner is shipped
partially unassembled.
Unpacking the Vacuum Cleaner
Carefully unpack the vacuum cleaner
and make sure that you have all parts
before discarding of any packaging.
Remove any tape, cardboard inserts,
and protective film before assembly.
Parts packed separately from the
vacuum cleaner are:
• Wand handle
• Wand
• Crevice tool
• Dusting/upholstery too!
• Pet Handi Mate ®
Installing the Hose
Your vacuum cleaner is shipped
from the factory with the hose
pre-installed. If the hose has come
loose during shipping, follow the
steps below to reinstall it.
To install the hose:
1. Press the dust bin release button and
remove the dust bin.
3. From the front of
the vacuum cleaner
insert the lower end
of the hose through
the body at the _._3 _
location shown.
4. From the back of the vacuum cleaner,
feed the lower end of the hose down
and attach to the vacuum cleaner
base as shown.
2. Raise the HEPA filter cover.
5. Lower the HEPA filter cover and reinstall
the dust bin by placing it in the holder,
then tilting it forward until it clicks into
place. Make sure the dust bin is properly
seated and the cord wrap frame (hanger)
is fully engaged in the dust bin handle.
Attaching the Wand/Handle
To assemble the wand and wand
handle to the vacuum cleaner:
1.Press the hose onto
the bottom of the
wand handle until it _,
clicks into place.
I
t
2. Press the top end
of the wand into the
wand handle until
it locks.
3. Insert the bottom end of the wand into
the socket on the vacuum cleaner
base. Then tilt the wand back until
it locks into place.
WARNING
Personal injury and Product Damage Hazard!
DO NOT useoutlets above counters. Damage to items inthe surrounding area
could occur.
Cord Storage
For ease of use,
extend the cord
from the base of
the vacuum cleaner
and press into the
retainer clip.
To store the cord:
1. Make sure the cord hanger is in the
UP position.
2. Wrap the cord around the cord
hanger and hook, then clip the plug
onto the cord.
NOTE: To reduce the risk of electric
shock, this vacuum cleaner has a
polarized plug; one blade is wider than
the other. This plug will fit in a polarized
outlet only one way. tf the plug does not
fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet.
Do not change the plug in any way.
Clip
To unwind the cord: _._._
1. Rotate the upper
cord holder to the
DOWN position.
2. Unclip the plug and
extend the cord.
Accessory Storage
Your vacuum cleaner features
convenient on-board storage for the
crevice tool and dusting/upholstery tool.
1. Insert end of the crevice tool into the
slot on the lower cord hanger, rotate up
and lock into place.
NOTE: It will only fit one way.
2. Press the dusting/upholstery too! onto
the upper holder.
Switch Operation
Your vacuum cleaner features a
multi-speed motor that allows you to
adjust suction power for a variety of
cleaning tasks.
To turn on the vacuum cleaner:
1. Plug the power cord into a proper
outlet.
2. With the handle in the upright
position, press the ON/OFF
button. The Hi power level
indicator will light and the main motor
will run on high speed. The agitator
will start and the CARPET indicator
will light when the handle is tilted
down.
3. Press the power button
to select the power level.
Pressing the button
repeatedly will cycle through
the power levels.
Handle Tilt Release Operation
1. Press the left foot pedal to
release the handle to tilt back to a
comfortable position for floor
cleaning. For best cleaning, push
the vacuum cleaner forward and
pull backward in slow, even strokes.
2. To lock the handle in the upright
position for using attachments, raise
the handle until it is in a fully upright
position, and it will lock into place.
NOTE: The agitator will not run with the
handle in the upright position.
ON/OFF
Recommended settings:
_Lo: drapes, hard surfaces
Med:furniture, upholstery, area rugs
Hi: shag carpet, long pile, etc.
4. When the vacuum cleaner
ON/OFF button is pressed,
the agitator is set to come on
automatically when the
handle is tilted down. For bare floors,
press the Carpet/Floor button to turn
off the agitator.
NOTE: The Carpet (Agitator ON/OFF)
light will not come on and the agitator
will not run with the handle in the
upright position.
Adjusting the Nozzle Height
To adjust the nozzle height:
Press the right foot pedal to adjust the
pile height. Each press of the pedal will
step the nozzle height through extra
low, low, medium, and high. The right
side LED indicators will light to confirm
each position.
Suggested pile height settings:
You may need to raise the height to
make some jobs easier, such as
vacuuming scatter rugs and longer
pile rugs.
Recommended settings:
XLO very low pile, bare floors
L short to medium pile
M medium to long pile
H shag carpet, long pile, scatter rugs
Attention: Special care is required
when vacuuming certain types of carpet
or flooring. Always check the carpet
or floor covering manufacturer's
recommended cleaning instructions
before vacuuming.
10
Tips and Tricks
Carpet Edges and Corners:
For tight corners, carpet edges, and
along base boards, use the dusting/
upholstery tool. Use the crevice tool for
especially hard to reach areas.
Stairways and Landings:
Use the dusting/upholstery tool or
Pet Handi Mate® on stairs and landings.
Make sure that the vacuum cleaner is
placed so that it cannot tip or fall.
Attachments
See below and pages 12 and 13 for
instructions on selecting and using
attach ments.
Personal Injury Hazard
Use care ifvacuum cleaner is placed on
stairs. If it falls, personal injury or property
damage could result.
WARNING /
Crevice Tool Dusting/Upholstery
Crevice tool can be Tool
used fortight Use the upholstery
corners, between tool with the dusting
cushions, etc. brush in place for
dusting furniture,
walls, etc.
Attachment Use Chart
ATTACHMENT
Upholstery
Tool
Dusting/
Upholstery
Tool
Crevice
Tool
Pet HandiMate®
Furniture/
Hard
Surfaces*
,/
,/
Upholstered
Cushions*
,/
v"
,/
Upholstery Tool
Slide the dusting
brush off the
upholstery tool to
vacuum carpeted
floors, rugs, walls,
upholstered
furniture, cushions,
drapes, and other
fabrics.
CLEANING TASK
Drapes* Stairs
(lower
power
level)
,/
,/
Pet Handi Mate_'
This air-turbine
powered brush is
great for stairs and
vehicle interiors, as
well as removing pet
hair, lint, etc. from
fabrics and carpets.
Do NOT use on
pets.
Carpeted Walls
Floors/
Rugs
•/ v"
,/
Always make sure attachments are clean before using on fabrics.
11
Using the Wand or Wand Handle
: CAUTION
Never pull the vacuum cleaner by the
hose. Property damage could result.
For added versatility, the wand
may be removed from the vacuum
cleaner.
To release the wand and handle:
1. Make sure the vacuum cleaner is
locked in the upright position and on
a flat, stable surface.
2. Press the wand release button on
the carry handle and tilt the wand
handle forward.
3. Lift the wand out
and up.
4. If you wish to use
the handle only,
press the release
button on the
bottom side of the
handle and pull the
wand straight out of the handle.
12
Installing Attachments
Using the crevice tool:
Slide the crevice tool over the end of
the wand or fit it into the handle.
Using the dusting/upholstery tool:
Slide the dusting/upholstery tool over
the end of the wand or fit it into the
handle for dusting walls or hard
surfaces.
Slide the dusting
brush off the
dusting/upholstery
tool for cleaning
upholstery,
cushions, etc.
%
Using the Pet Handi Mate_"_:
The Pet Handi Mate_>attaches to the
wand like the other attachments.
However when attaching the Pet Handi
Mate _ to the handle push in until it
clicks into place. To remove press the
button on the bottom side of the handle.
/
It features a turbine-powered agitator to
provide extra cleaning power on carpets
and fabrics. It is great for cleaning stairs,
cushions, and vehicle upholstery.
When using the Pet Handi Mate;_ check
frequently for the buildup of hair, fibers,
lint, and other debris in the brush area.
Excessive buildup can reduce
performance and could damage the
Pet Handi Mate_.See the Care and
Cleaning section for cleaning
instructions.
When finished using the crevice tool or
dusting/upholstery tool, fit them back
into their holders on the back of the
vacuum cleaner.
13
Agitator Motor Overload Protection
The agitator has a built-in protection
against motor damage should the
agitator jam.
If the agitator stops, the agitator
overload protector shuts off the
agitator motor. The suction motor
will remain on at this time.
To correct problem: Turn off and
unplug vacuum cleaner, remove
obstruction, and press the RESET button.
When vacuuming, if the agitator
is not running at full speed due
to an obstruction, in the agitator area,
the agitator "ON/OFF" LED will begin
a series of three flashes followed by a
pause.
To correct problem: Turn off and
unplug vacuum cleaner, then remove
obstruction from the agitator.
Agitator ON/OFF
Thermal Overload Protection (Main Vacuum Cleaner Motor)
This vacuum cleaner has a thermal
overload protector which automatically
activates to protect the vacuum cleaner
from overheating, if a clog prevents the
normal flow of air to the motor, the
thermal protector turns the motor off
automatically to allow the motor to cool
in order to prevent possible damage to
the vacuum cleaner.
To correct problem: Turn the vacuum
cleaner off and unplug the power cord.
Check for and remove clogs, if
necessary. Also check and
clean/replace any clogged filters.
Wait approximately 30 minutes and
plug the vacuum cleaner in and turn
back on to see if the motor protector
has reset. The thermal protector system
will not reset until the vacuum cleaner
has cooled down.
LED Headlight
The LED headlight will come on when
the vacuum cleaner is on.
14
Alwaysfollowallsafetyprecautionswhencleaningandservicingthe
vacuumcleaner.
Storing the Vacuum Cleaner
When not in use, wrap the cord around
the cord hanger, as shown. Store the
crevice tool and upholstery tool in their
proper places on the back of the
vacuum cleaner.
WARNING
Electrical shock and personal
injury hazard.
Take care when wrapping the cord.
Wrapping the cord too tightly puts
stress on the cord and can cause
cord damage. Do not criss-cross
when wrapping the cord. A damaged
cord is an electrical shock hazard
and could cause personal injury
or damage.
Dust Bin Components
The dust bin consists of several key
components. Always make sure that all
parts are properly reinstalled after
emptying the dust bin.
NEVER operate the vacuum cleaner
without all filters in place!
NEVER operate the vacuum cleaner
with wet filters or components!
Key components:
Dust bin lid:
Open to access pre-filter.
Pre-filter:
Captures medium to fine particles.
Dust bin:
Where dirt is collected.
Screen filter:
Captures larger debris and fibers.
Bottom plate release button:
Press down to open the bottom plate.
Bottom plate:
Open to empty the dust bin.
Dust bin --
Bottom--
plate
Screen filter _
i
i
)
Bottomplate
release button
(onback)
S
15
Loading...