Kenmore 72124195S Owner’s Manual

Owner's Manual Manual del Propietario
Canister Vacuum Cleaner
Aspiradora
Model, Modelo 721.24195S
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A www. sears, corn
Part No.: 3828FI3849S Printed in CHINA
KenmoreApplianceWarranty..................................2
ImportantSafety Instructions..................................3
Parts and Features....................................................4
Assembly...................................................................6
Useand Care .............................................................6
HowYour Vacuum Works........................................6
Howto StartYour Vacuum.......................................6
Attachments..............................................................7
AttachmentsUse Chart ............................................7
VacuumingTips ........................................................8
Please read this guide• it will help you assemble and operate your new Kenmore vacuum in the safest and most effective way. For more information aboutvacuum care and operation, call your nearest Sears store. You will need the complete model andserial numbers when requesting information•
Your vacuum's model and serial numbers are located on the Model and Serial Number Plate. Use thespace below to recordthe modelnumber and serialnumber ofyour new Kenmorevacuum. Model No.
Serial No. Date of Purchase Keep this book andyour sales check (receipt) in a safe place for future reference.
PerformanceFeatures............................................8
ChangingThe Dust Bag.........................................9
Cleaning Motor Safety Filter..................................9
Cleaning Exteriorand Attachments....................10
Storing YourVacuum............................................10
CleaningAir-Turbine BrushNozzle.....................11
Belt changingand brush cleaning ......................11
Troubleshooting....................................................13
Parts List..........................................................14-16
Master ProtectionAgreements............................17
Service....................................................Back Cover
ONE YEAR LIMITED WARRANTY When assembled,operatedandmaintainedaccordingto all instructionssuppliedwiththeproduct,ifthis appliance
fails due to a defect inmaterial orworkmanship within one year from the date of purchase, returnit to any Sears store, Sears Parts & Repair Center or other Kenmore outlet for free repair.
Ifthis appliance is used for other than private family purposes, this warranty applies for only 90 days from
the date of purchase.
This warranty covers only defects in material and workmanship, Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limitedtofilters, belts, lightbulbs, and bags.
2.A service technician to instruct the user in correct product assembly, operation or maintenance.
3.A service technician to clean or maintain this product.
4. Damaqeto or failureofthis product if it is notassembled operatedor maintained accordingto allinstructions suppl _d w th the product.
5. Damage to or failureof this product resultingfrom accident, abuse, misuse oruse forother than itsintended purpose.
6. Damage to or failure of thisproduct caused by the use ofdetergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.
7. Damage to or failure of parts orsystems resultingfrom unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies Customeris soleand exclusive remedy under this limitedwarrantyshall be product repairas provided herein. Impliedwarranties,includingwarrantiesofmerchantabilityorfitnessfor a particularpurpose,arelimitedto oneyear or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States and Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 Sears Canada inc., Toronto, Ontario, Canada M5B 2B8
2
WARNING
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions
including the following: Readthis manualbeforeassemblingor using
yourvacuumcleaner. Useyourcleaneronlyasdescribedinthis
manual.Useonlywithsuppliedattachments. To reducethe riskof electricalshock- Do not useoutdoorsor on wetsurfaces.
Disconnect electricalsupply beforeservicing or cleaningout brusharea.Failureto do so
couldresultin electricalshock orbrush suddenlystarting.
Always turn cleaneroff beforeconnectingor disconnectingthe hose.
Always turn cleaneroff beforeunplugging. Do not unplugby pullingoncord.To unplug,
graspthe plug, notthe cord. Hold plugwhen rewindingontocordreel. Do not allow plugto whipwhen rewinding.
Do not usewith damagedcordor plug.If cleaneris notworking as it should,has been
dropped,damaged,left outdoors,ordropped intowater.
Do not pull orcarry bycord,usecordas a handle,closedooroncord, or pullcordaround sharpedgesor corners.Donot runcleanerover cord.Keepcordawayfromheatedsurfaces.
Do not leavecleanerwhenpluggedin.Unplug fromoutletwhennot inuse andbeforeservicing.
Do not allowtobeusedasatoy. Closeattention isnecessarywhenusedbyor nearchildren. Do not handleplug orcleanerwith wet hands.
Do not operatethe cleanerwith a punctured hose.Replaceif cutor worn. Avoidvacuuming
sharp objects.
Do not usewith any openingblocked;keep
free of dust, lint, hair and anythingthat may
reduceair flow. Keep hair,looseclothing,fingers, andall parts
of body awayfromopenings and movingparts. Do not usecleaner withoutdust bagand/or
filters in place.
Always changethe dust bag aftervacuuming
carpet cleanersor freshener,powdersand fine
dust.These productsclogthe bag,reduce airflowand cancause the bagto burst. Failure
to changebag couldcause permanentdamage to thecleaner.
Do not usethe cleanerto pickupsharp hard objects,small toys,pins, paper,etc. Theymay damagethe cleaneror dustbag. Donot pickupanythingthatisburningorsmoking,
suchascigarettes,matches,or hotashes.
Do not usevacuumcleaner
topick upflammableorcombustibleliquids (gasoline,cleaningfluids,perfumes,etc.),oruse in areaswheretheymaybe present.Thefumes
fromthesesubstancescancreatea fire hazard
orexplosion. Use extra care whencleaningon stairs.Donot puton chairs,tables,etc. Keep onfloor.
You are responsiblefor makingsurethat your vacuumcleaner is notusedbyanyoneunable to operateit properly.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your cleaner is intended only for household use. Read this Owner's Manual carefully for important use and safety information. This guide contains safety statements under warning and caution symbols. Please pay special attention to these boxes and follow any instructions given. WARNING statements alert you to such hazards as fire, electrical shock, burns and serious personal injury. CAUTION statements alert you to such hazards as moderate personal injury and/or property damage.
Itisimportanttoknowyourvacuumcleaner'spartsandfeaturestoassureitsproperandsafe use.Reviewthesebeforeusingyourcleaner.
Slide Switch ___ Hose
N
Handle Button / _/ ...................Fitting Hook
Cord Reel
._ ButtonPerformance In _ PowerCord
Telescopic _ / _ (Not Shown) Wand / / "/
// Lid Release [ ....,
// Suction
Wand /_/ Button
Pile Adjustment
...........Air-Turbine Brush Nozzle
ATTACHMENTS
Crevice Tool Dusting/
Upholstery Tool
-4-
Before assembling your vacuum cleaner, be sure you have all the parts shown in PARTS
AND FEATURES.
TELESCOPIC WAND
Hold spring latch and pull out or push in wand to
required length.
CANISTER
1. Open the canister hood.
2. Check to seethat the dustbagis properly installed.See CHANGINGTHE DUSTBAG
forinstructions.
3. Check to see that the motor safety filter is properly installed. See CLEANING
MOTOR SAFETY FILTER for instructions.
Spring Latch
AIR-TURBINE BRUSH NOZZLE
1. Insert wands into the Air- \
Turbine Brush
Nozzle until the
wand button snaps into place
in the hole of
the tool.
2. Slide the Pile Adjustment to the right for long pileand to the left for short pile.
djus
Long Pile Short Pile
ATTACHMENTS
Open theaccessory cover and pull out accessory you want.
For proper use of accessory and best cleaning results, see ATTACHMENT USECHART.
Safety _, i
Filter ;_ i ' Motor
HOSE
Fitting
1. Insert hose into canister until it snaps into place.
To remove hose: Push hose fitting hook down and pull out.
2. Insert wand into handle until lock button snaps into place.
To remove handle: Press lock button in turn the pipe and pull up on handle.
Handle........
®
Lock Button
5
USE AND CARE
The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries the dirt to the dust bag through the air flow passages. The dust bag lets the air pass through, while it traps the dirt. For
best cleaning results, keep the airflow passage open. Check the starred areas occasionally for clogs. Unplug from outlet before checking.
NOTE: Do not stand canister body on its end while operating or you will block the
exhaust vents.
_I_ WARNING
Personal Injury and Product Damage
Hazard!
DO NOT plug in if switch is in ON position. Personal injury or damage
could result.
The cord moves rapidly when rewinding.
Keepchildren away and provide a clear
path when rewinding the cord to prevent personal injury.
DO NOT use outlets above counters.
Damage to items in surrounding area
could occur.
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
f
1. Pull out the power cord to the desired length.
2. Plug power cord into a 120 Volt outlet located near the floor.
Note: To rewind the cord when finished
vacuuming, first unplug the cleaner. Hold
the plug while rewinding to prevent damage or injury from the moving cord.
Press on the cord reel button to rewind the cord.
3. To start, push slide switch down toward MAX. To stop, raise slide up to OFF.
OFF
-6-
ATTACHMENTS ON HANDLE
1. Press handle button on wand and remove it from handle.
2. Push crevice tool onto handle.
ATTACHMENTS ON WANDS
The crevice tool and dusting/upholstery tool do not have locking holes.
Put on attachments as needed.
See chart below.
The dusting/upholstery tool has two options. When the brush is removed the remaining part can be used as an upholstery tool.
Upholstery_
3. Dusting/Upholstery tool will fit onto extension wand only.
CLEANING AREA
ATTACHMENT Furniture* Between Drapes* Stairs Bare Carpeted Walls
Crevice Tool
_/9 X X X X
Dusting /
Cushions* Floors Floors/Rugs
X X
X
Brush
Upholstery Tool
Brush Nozzle
Air-Turbine
X X
X
X X
* Always clean attachments before using on fabrics.
X
Suggestedsweeping pattern
For best cleaning action, the Air-Turbine Brush Nozzle should be pushed straight forward from you and pulled straight back.
This pattern should be continued across the
rug with slow, gliding motions.
NOTE: Fast, jerky strokes do not provide complete cleaning.
Carpeted stairs need to be vacuumed
regularly. For best cleaning results, put the
slide switch on MAX.
For best cleaning results, keep the airflow
passage open. Check occasionally for clogs. See HOW YOUR VACUUM WORKS
section. Unplug from outlet before checking.
ONE-TOUCH CONTROL
The length of wand can be changed by one
touch quickly and easily. Adjust the length of wand as shown.
SUCTION CONTROL
The handle slide switch allows you to change
the vacuum suction for different fabric and carpet weights.
Adjust the suction power with slide switch in the handle.
OVERLOAD PROTECTOR
The motor has an overload protector.
If the cleaner starts but cuts off, unplug cord from wall outlet and wait 20-25 minutes for
motor to cool and automatically reset.
HOSE SWIVEL
The hose swivel prevents the hose
from twisting. This is helpful for cleaning in small
areas.
PERFORMANCE INDICATOR
When the unit is
running, the indicator
windows will be green if there are
no clogs. When the indicator
window turns completely red,
check if the dust bag is full or if other areas are clogged.
See HOW YOUR VACUUM WORKS.
NOTE: Indicator window may turn red when using attachments or when cleaning new carpet. This is due to reduced airflow caused
by the vacuum seal between attachment and surface, or new carpet fuzz filling the bag quickly. Restore airflow by raising attachment slightly from surface you are cleaning, or replace bag if it is full.
IndicatorWindow
-8-
For best cleaning results, the dust bag should be changed before it gets full. Use dust bag no. 5231FI2390J
1. Unplug cord from wall outlet.
2. Pull lid release latch out and up, then lift canister hood.
3. Press back the bag mount hook.
i_\ Lid Release
Bag Mount {_ _ _ '( //
Hook_
_!_ CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc., can clog the bag
and cause it to burst before it is full. Change bag more often when
vacuuming these materials.
4. Remove used bag and throw it away.
5. To insert new dust bag:
Press back the bag mount hook.
Fit bottom edge of bag mount tab onto bag mount ledge.
Pull bag mount tab flush with suction inlet hole.
Secure bag mount hook over top edge of bag mount tab.
Bag Mount Tab
6. Close and latch canister hood.
NOTE: The vacuum is fitted with a safety device which prevents you from closing the canister hood if the bag isnot fitted correctly.
7. Plug cord into wall outlet.
WARNING
Electrical Shock Hazard Do not operate the cleaner without the
motor safety filter. Besure the filter is dry and properly installed to prevent
motor failure and/or electrical shock.
Check motor safety filter occasionally and clean when dirty.
1. Unplug cord from wall outlet and lift canister hood.
2. Pull out the dust bag and motor safety filter as shown.
3. Wash filter in warm soapy water, rinse,
then dr,!. Do not clean in dishwasher or install while damp.
4. Insert motor safety filter back into canister.
5. Insert dust bag and close the hood.
1. Unplug cord from wall outlet. DO NOT drip water on cleaner.
2. Clean vacuum exterior using a clean, soft cloth that has been dipped inclean water,
then wrung out. Wipe dry after cleaning.
NOTE: Regular cleaning helps to reduce static electricity and dust buildup on outer
surfaces of cleaner and attachments.
_I_ CAUTION
DO NOT use attachments if they are
wet. Damage to dust bag and motor
may occur.
Attachments used in dirty areas, such as under a refrigerator, should not be
used on other surfaces until they are
washed since they could leave marks.
When not in use, attach wand assembly to canister by inserting nozzle clip into either the bottom or back storage clip holder. See Fig.1 and Fig.2. Attach hose storage clip to handle. Store wand assembly in upright position only.
Fig. 1 Fig. 2
-10-
7 NozzleClip
BackStorage
Clip Holder
Loading...
+ 21 hidden pages