KING SIZETM CAPACITY DRYER
1
3 |
4 |
5 |
6 |
2
Stock Nos. 60992 (Elec.) & 70992 (Gas) Stock Nos. 60994 (Elec.) & 70994 (Gas) Stock Nos. 60996 (Elec.) & 70996 (Gas) Stock Nos. 60997 (Elec.) & 70997 (Gas)
Features –
Become familiar with all features before using your dryer. Refer to your Owner’s Manual for feature details.
1Cycle Selector Control (Timer)
• EVENHEAT™ with Auto
•
•TOUCH UP
•TUMBLE FREETM HEATED DRYER RACK
2MOISTURE MONITOR indicator lights
35 FABRIC CARE/ TEMPERATURE settings for additional clothing care
4WRINKLE GUARD® III
5END-OF-CYCLE SIGNAL (adjustable tone)
3977534B
11/99
6PUSH TO START Button
7Lint Screen
8Model and Serial No. Plate
9Drum Light
10TUMBLE FREETM Heated Dryer Rack -- for gentle care of special fabrics
11EZ Loader Hamper Door
Additional Features
•ULTRA QUIET PAK™ Sound Insulation for extra-quiet operation
•KING SIZE TM Capacity for fewer loads
•Porcelain Top
8
9
10
7
Your dryer has features that may vary from those described in your Owner’s Manual. These features are illustrated and described on this sheet. Refer to your Owner’s Manual for general operating instructions.
EVENHEAT™ with Auto Moisture Sensing Plus Cycle
for your Benefit
Proper use of the EVENHEAT™ with Auto Moisture Sensing Plus cycle will dry your clothes faster and at lower temperatures with less shrinking and fading.
This cycle takes the guesswork out of drying. Dryness is determined by an electronic sensor that “feels” the amount of moisture in clothes as they pass over it. Once the cycle starts, the sensor automatically adjusts the drying time based on the size of the load and the types of fabric being dried. As a result, clothes dry faster and you get more precise drying temperatures.
The EVENHEAT™ drying system uses a solid-state sensor to prevent the large variations in drying temperatures that occur in most other dryers. More consistent,
even heat in every cycle results in better fabric care by shortening drying times and by maintaining lower drying temperatures.
More about EVENHEATTM with Auto Moisture Sensing Plus
•When the Cycle Selector Control (Timer)
is set to NORMAL DRY *, and has run through a full drying cycle, you can feel the dried clothes and determine if the load is more damp than you would like.
•If the load is too damp, you can use the TIMED DRY cycle to dry the clothes further. The next time you do a similar load, move the timer toward MORE DRY.
•If the load is overdried at the end of the cycle, you can move the timer toward DAMP DRY the next time you do a similar load.
NOTE: For very small loads (3-4 garments) use the TIMED DRY cycle for best results. You can use the FABRIC CARE/ TEMPERATURE Control with a setting that is appropriate for your load.
When to Use DAMP DRY
for your Benefit
Selecting DAMP DRY helps shorten drying times for items you would normally hang dry.
Some fabrics will shrink if dried in a clothes dryer. Selecting DAMP DRY gives you the benefit of electronic moisture sensing.
Clothes are dried with heat for a brief time so most of the moisture is removed. However, the drying cycle stops while the clothes are still damp to prevent overdrying. As a result, fabrics retain the proper amount of moisture so they will not shrink.
When to Use the TUMBLE FREETM Heated Dryer Rack
for your Benefit
The dryer rack gives you concentrated heat for efficient and uniform drying. It also reduces noise when drying items that have buckles. Use the heated dryer rack with the TIMED DRY cycle only. This allows you to machine dry items for a specific length of time without tumbling.
FITTHIS OVER BOTTOM |
OF DOOR OPENING |
|
FABRIC CARE/TEMPERATURE CONTROL
for your Benefit
Proper use of this control helps ensure that fabrics are dried at the right temperature for maximum life.
Use this control to select the drying temperature that matches the fabrics in your load.
•For hand washed or delicate items, select the ULTRA DELICATE setting. This setting will not exceed a maximum fabric temperature of 140°F.
NOTE: Not all hand washable garments can be dried in a dryer. Check the care label on all hand washable garments to determine whether or not they can be machine dried.
•For more description of garment types and temperature settings, refer to your Owner’s Manual.
MOISTURE MONITOR
The Moisture Monitor senses moisture in the load and indicates the drying status:
•WET - A wet load is in the dryer.
•DAMP - The load is 80% dry. You may remove partially dry items (which saves on ironing) or the lighter items of a mixed load (e.g., lingerie and some exercise wear).
•COOL DOWN - The load is dry and is in the COOL DOWN period.
“Smart,” Temperature-Sensing COOL DOWN Period
Once the selected level of dryness
is reached, the dryer goes into a Cool Down period lasting 1-10 minutes. Unlike other dryers which provide a fixed 10-minute Cool Down, this “smart” Cool Down period is based on the temperature of the clothes in your load and varies the time accordingly. The Moisture Monitor’s “Cool Down” light will come on during this period.
•For small loads or loads that are dried at a lower temperature, the Cool Down period will be reduced to as low as one minute.
•For large loads or loads that are dried at a high temperature, the Cool Down period will be closer to 10 minutes.
TOTAL CARETM SYSTEM
The exclusive TOTAL CARETM SYSTEM combines the KING SIZETM load capacity, EVENHEATTM , WRINKLE GUARD® III, and the TUMBLE FREETM Heated Dryer Rack to ensure total drying care for any type of fabric and load size.