Kenmore 665.16512, 665.16514, 665.16519, 665.17512, 665.17514 Owner's Manual

...
ULTRA WASH® Dishwasher
Use & Care Guide
Lavavajillas ULTRA WASH
®
Manual de uso y cuidado
®
Lave-vaisselle ULTRA WASH
Guide d’utilisation et d’entretien
665.17512, 665.17514, 665.17519
8539310A
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8
www.sears.com
www.sears.ca
TABLE OF CONTENTS
PROTECTION
PROTECTION AGREEMENTS.......................................................2
In the U.S.A...................................................................................2
In Canada .....................................................................................3
WARRANTY.....................................................................................3
DISHWASHER SAFETY..................................................................4
Before Using Your Dishwasher ....................................................5
PARTS AND FEATURES ................................................................6
ULTRA WASH® Soil Removal System Featuring
START-UP GUIDE ..........................................................................7
Using Your New Dishwasher........................................................7
DISHWASHER LOADING..............................................................8
Loading Suggestions....................................................................8
Loading the Top Rack..................................................................8
Loading Bottom Rack ..................................................................9
Loading Silverware Basket........................................................ 10
DISHWASHER USE .................................................................... 10
Detergent Dispenser.................................................................. 10
Rinse Aid Dispenser .................................................................. 12
Dishwasher Efficiency Tips ....................................................... 12
Control Panel............................................................................. 13
Cycle Selection Charts.............................................................. 13
Canceling a Cycle...................................................................... 14
Changing a Cycle or Setting ..................................................... 14
Adding Items During a Cycle..................................................... 14
Option Selections...................................................................... 14
Cycle Status Indicators ............................................................. 15
Active Vent................................................................................. 15
Drying System ........................................................................... 15
Overfill Protection Float............................................................. 16
WASHING SPECIAL ITEMS........................................................ 16
DISHWASHER CARE................................................................... 17
Cleaning..................................................................................... 17
Drain Air Gap ............................................................................. 17
Storing ....................................................................................... 17
TROUBLESHOOTING.................................................................. 18
SERVICE NUMBERS ............................................... BACK COVER
smartwash
™ Sensing System...................................7
AGREEMENTS
In the U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase. Your new Kenmore dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when having a Master Protection Agreement can save you money and aggravation.
Purchase a Master Protection Agreement now and protect yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life of your new appliance. Here’s what’s included in the Agreement:
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.
Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That’s the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and information call
®
appliance is designed and manufactured for years of
Expert service Unlimited service and no charge
covered repairs
“No-lemon” guarantee
product if more than three product failures occur within twelve months
Product replacement Annual Preventive Maintenance Check
extra charge
Fast help by phone
assistance on products repaired in your home, plus convenient repair scheduling
Power surge protection
power fluctuations
Rental reimbursement
longer than promised
by our 12,000 professional repair specialists
for parts and labor on all
– replacement of your covered
if your covered product can’t be fixed
at your request – no
– non-technical and instructional
against electrical damage due to
if repair of your covered product takes
1-800-827-6655
.
Sears Installation Service
For Sears guaranteed professional installation of home appliances and items like garage door openers and water heaters, in the U.S.A. call
1-800-4-MY-HOME
®
.
2
In Canada
Maintenance Agreements
Your purchase has added value because you can depend on Sears HomeCentral Technicians and access to over 900,000 parts and accessories, we have the tools, parts, knowledge and skills to back our pledge: We Service What We Sell.
You r K en mo re to provide years of dependable operation. Yet any major appliance may require service from time to time. The Sears Maintenance Agreement offers you an outstanding service program, affordably priced.
®
for service. With over 2,400 Service
®
appliance is designed, manufactured and tested
The Sears Maintenance Agreement
Guarantees tomorrow’s service at today’s price.
Eliminates repair bills resulting from normal wear and tear.
Covers non-technical and instructional service calls.
Provides an annual Preventive Maintenance Check, at your request, to ensure that your appliance is in proper running condition.
Some limitations apply. For information concerning Sears Home Central 1-800-361-6665.
®
Maintenance Agreements, call
WARRANTY
FULL ONE-YEAR WARRANTY ON THIS KENMORE ULTRA WASH
For one year from the date of purchase, when this dishwasher is installed and operated according to instructions provided in the Installation Instructions and Use & Care Guide, Sears will repair this dishwasher, free of charge, if defective in material or workmanship.
FULL TWO-YEAR WARRANTY ON ELECTRONIC CONTROL AND POWER SUPPLY BOARD
For two years from the date of purchase, when this dishwasher is installed and operated according to instructions provided in the Installation Instructions and Use & Care Guide, Sears will repair, free of charge, the electronic module and power supply board if defective in material or workmanship.
FULL WARRANTY FOR THE LIFE OF THE DISHWASHER, ON ULTRA LIFE™ TUB MODELS, AGAINST LEAKS IN THE TUB AND INNER DOOR PANEL
For the life of the dishwasher, if a leak should occur as a result of failure of the polypropylene tub or inner door panel due to cracking, chipping or peeling, Sears will replace free of charge the tub or inner door panel.
®
DISHWASHER
LIMITED TWO-YEAR WARRANTY ON THE ULTRA WASH® WASH SYSTEM
After the first year and until two years from the date of purchase, when the dishwasher is installed and operated in accordance with the instructions provided in the Installation Instructions and Use & Care Guide, Sears will replace any part of the ULTRA WASH ULTRA FLOW™ water feed tube, motor seals and pump gasket) due to defective materials or workmanship. Customer assumes any labor costs associated with replacement of these parts.
®
wash system (motor, pump, spray arms,
LIMITED FIVE-YEAR WARRANTY ON UPPER AND LOWER RACKS
After the first year and until five years from the date of purchase, when the dishwasher is installed and operated in accordance with the instructions provided in the Installation Instructions and Use & Care Guide, Sears will replace parts for the upper or lower dishrack if the rack rusts due to defective materials or workmanship. Customer assumes any labor costs associated with dishrack replacement.
WARRANTY RESTRICTION
If the dishwasher is subject to other than private family use, the above warranty coverage is effective for only 90 days.
WARRANTY SERVICE
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES OR CANADA. This warranty applies only while the product is in use in the United States or Canada.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.
Warranty terms may vary in Canada. For Sears Warranty information in the United States or Canada,
please reference the service numbers located on the back page of this manual.
Sears, Roebuck and Co.
D/817WA, Hoffman Estates, IL 60179
Toronto, Ontario, Canada M5B 2B8
Sears Canada, Inc.
PRODUCT RECORD
In the space below, record your complete model number, serial number, and purchase date. You can find this information on the model and serial number label, located as shown in the Parts and Features section of this book. Have this information available to help you quickly obtain assistance or service when you contact Sears concerning your appliance.
Model number 665.______________________________________________
Serial number___________________________________________________
Purchase date __________________________________________________
Save these instructions and your sales receipt for future reference.
3
DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
can be killed or seriously injured if you don't
You follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
4
Before Using Your Dishwasher
Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts.
Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector
in terminal box. Do not use an extension cord. Failure to follow these instructions can result in
death, fire, or electrical shock.
Install where dishwasher is protected from the elements. Protect against freezing to avoid possible rupture of fill valve. Such ruptures are not covered by the warranty. See “Storing” in the “Dishwasher Care” section for winter storage information.
Install and level dishwasher on a floor that will hold the weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors (such as the cap on the drain outlet) before installing. See Installation Instructions for complete information.
5
PARTS AND FEATURES
2
3
5 6
7
8
9
0
4
10
11
1
1
1
2
3
1 1
1
4 5 6
1
7
1
8
9
1
2
21
1.
Upper level wash
2.
Top ra ck
3.
Utensil basket
4.
Bottom rack
5.
Model and serial number label
6.
Fold-down tines
7.
Water inlet opening [in tub wall]
Control Panel
SMART
WASH
POTS
PANS
CYCLES
NORMAL
WASH
CHINA
GENTLE
QUICK
RINSE
8.
Rack bumper
9.
Heating element
10.
Detergent dispenser
11.
Active vent
12.
Flexible tines
13.
Cup shelves
14.
No-flip clips [on some models]
HI TEMP
SCRUB
OPTIONS
SANI
RINSE
AIR
DRY
LOCK ON
WASHING
SENSING
DRYING
SANITIZED
CLEAN
15.
Top spray arm
16.
ULTRA FLOW™ water feed tube
17.
Silverware basket
18.
Lower spray arm
19.
Overfill protection float
20.
ULTRA WASH
21.
Rinse aid dispenser
HOURS
2 4 8
DELAY
HOURS
CANCEL
DRAIN
®
module
START
6
ULTRA WASH® Soil Removal System
Featuring
smartwash
Sensing System
The ULTRA WASH® Soil Removal System gives you sparkling clean dishes, while using less energy and time. The ULTRA
®
Soil Removal System includes:
WASH
A heavy-duty grinder that acts as a food disposer to grind and dispose of large food particles.
An ULTRA WASH® sensor to monitor soil level and adjust the cycles as needed.
An Automatic Temperature Control (ATC) that ensures the proper water temperature for the selected wash cycle and soil level of the load.
A Triple Action Filtration system that intermittently filters soil from the wash water.
How the ULTRA WASH® Soil Removal System and the Triple Action Filtration System work
1.
Load the dishwasher. Remove bones, large chunks or burned-on food. No rinsing is necessary. Any remaining food soil will be ground up and disposed down the drain with the wash water.
2.
After dishwasher starts, hot water fills the dishwasher to a level near the bottom of the overfill protection float.
3.
When the wash cycle begins, the SENSING indicator glows and the soil level and water temperature are read.
4.
The water drains at the end of the wash cycle or when high soil levels are sensed. Once drained, water fills again near the bottom of the overfill protection float.
5.
As the main wash cycle begins, the SENSING indicator glows while the sensors measure soil load and temperature. Heat will be added during this period until the needed temperature is reached. The temperature needed depends on the cycle chosen and the soil level and dishload sensed.
6.
Detergent is dispensed at the correct time in the cycle. The hot water and detergent spray against the soiled surfaces of the load and remove food particles.
7.
Soils washed from the dishes are filtered from the wash water through the pump system. (See illustration below.)
1
2
9.
The length of the main wash depends on the soil level sensed and the time needed to reach water temperature. The wash action will repeatedly pause for several seconds during this process.
10.
Once the first rinse begins, fresh hot water enters the dishwasher and sprays onto the dishes. This rinse water is then pumped through the ULTRA WASH System and remaining soil is removed.
11.
The final rinse water is heated. The rinse aid is dispensed to the water for the final rinse to prepare the dishes for drying.
®
Soil Removal
How the ULTRA WASH® Sensor and the Automatic Temperature Control (ATC) work
1.
The SENSING indicator glows while the ULTRA WASH Sensors detect the soil level or water temperature in the dishwasher.
2.
After the soil level is determined, unnecessary portions of the cycle are skipped.
3.
The ATC adjusts the water temperature throughout the cycle depending upon the soil level detected. Higher water temperatures are used to improve cleaning with heavier soiled loads.
How the
1.
2.
smartwash
When the indicator glows while the detecting the amount of soil, water temperature, and the size of the dishload in the dishwasher.
After the soil level and dishload size are determined, the sensors automatically adjust the temperature and the amount of water used for the load. This allows less water usage when there is a smaller, less heavily-soiled dishload.
smartwash
™ Sensing System works
™ cycle is started, the SENSING
smartwash
™ Sensors are
®
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety information and useful operating tips.
Using Your New Dishwasher
1.
Scrape large food soil and hard items (toothpicks or bones) from dishes.
2.
Properly load the dishwasher. (See “Dishwasher Loading.”) Make sure nothing prevents the spray arm(s) from spinning freely.
3
1. Soiled water flows into the pump.
2. The water is then pumped into the spray arms.
3. A portion of the pumped water is directed through the filterbox.
Water travels through this sytem continuously during both wash and rinse cycles.
8.
Once soils collect in the filterbox, they will be sensed and purged. (See 3 above.) The soil is purged by removing only the soils and water in the filterbox. Only a small amount of hot water is removed from the wash cycle. Removing only soiled water conserves water and detergent.
3.
Add detergent and check the rinse aid dispenser. Add rinse aid if needed. (See “Dishwasher Use.”)
7
4.
Push door firmly closed. The door latches automatically. Run hot water at the sink nearest your dishwasher until the water is hot. (See “Dishwasher Efficiency Tips.”) Turn off water.
5.
Press the desired cycle and option selections. (See “Dishwasher Use.”) Press START. Or press START to repeat the same cycle and options as the previous cycle.
DISHWASHER
LOADING
Loading the Top Rack
The top rack is designed for cups, glasses, and smaller items. Many items, up to 9 in. (22 cm), fit in the top rack. (See recommended loading patterns shown.)
NOTE:
The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
Loading Suggestions
Remove leftover food, bones, toothpicks and other hard items from the dishes. It is not necessary to rinse the dishes before putting them into the dishwasher.
NOTE:
Dishes soiled with tomato-based products should be
pre-rinsed to avoid staining. The wash module removes food particles from the water. The
module contains a chopping device which will reduce the size of food items.
NOTE:
If hard items such as fruit seeds, nuts, and egg shells enter the wash module, you might hear chopping, grinding, crunching, or buzzing sounds. These sounds are normal when hard items enter the module. Do not let metallic items (such as pot handle screws) get into the wash module. Damage can occur.
It is important for the water spray to reach all soiled surfaces.
Load dishes so they are not stacked or overlapping, if possible. For best drying, water must be able to drain from all surfaces.
Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not interfere with the spray arm rotation.
Run a rinse cycle to keep dishes moist if you do not plan to wash them soon. Foods such as eggs, rice, pasta, spinach, and cooked cereals may be hard to remove if they are left to dry over a period of time.
Quiet operating tips
To avoid thumping/clattering noises during operation:
Make sure lightweight load items are secured in the racks.
Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the rotation of the spray arm.
Load dishes so they do not touch one another.
NOTE:
For built-in models, keep sink drain plugs closed during
dishwasher operation to prevent noise transfer through drains.
12 place setting
Place items so open ends face down for cleaning and draining.
Load glasses in top rack only. The bottom rack is not designed for glasses. Damage can occur.
Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.
China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur.
Load lightweight plastic items in the top rack only. Only plastic items marked “dishwasher safe” are recommended.
Load plastic items so the force of the spray does not move them during the cycle.
To avoid chipping, do not let stemware touch other items.
Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for best stability.
Utensil basket
Use this extra capacity basket in the back of the top rack to hold spatulas, wooden spoons, and similar items.
8
Cup shelves
Fold down the extra shelves on the right side of the top rack to hold additional cups, or long items such as utensils and spatulas.
Flexible tines (on some models)
The row of tines on the left and right sides of the top rack can be adjusted to make room for a variety of dishes.
To adjust the flexible tines
1.
Grasp the tip of the tine that is in the tine holder.
2.
Gently push the tine out of the holder.
3.
Lay the tines down, toward the center of the rack.
Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.)
NOTE:
The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
Do not load glasses, cups, or lightweight plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.
No-flip clips (on some models)
The no-flip clips hold lightweight plastic items such as cups, lids, or bowls in place during washing.
To move a clip
1.
Pull the clip up and off the tine.
2.
Reposition the clip on another tine.
12 place setting
Load cookie sheets, cake pans, and other large items at the sides and back. Loading such items in front can keep the water spray from reaching the detergent dispenser.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation of the spray arm(s). The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of the dishwasher tub because they might block the water inlet opening.
NOTE:
If you have removed the bottom rack for unloading or
cleaning, replace it with the bumpers in front.
9
Fold-down tines
3
4
You can fold down one or both rows of tines at the back of the bottom rack.
1.
Grasp the tip of the tine that is in the tine holder.
2.
Gently pull the tine out of the tine holder.
3.
Lay the row of tines down in the rack to make room for larger dishes, bowls, pots, pans or roasters.
Loading Silverware Basket
Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table.
NOTE:
Unload or remove the basket before unloading the racks
to avoid spilling water droplets on the silverware.
Place small items such as baby bottle caps, jar lids, corncob holders, etc., in a covered section. Close the cover to hold small items in place.
To remove a small basket
1.
Hold the center basket and one small basket. Slide the small basket forward to release the tabs from the corresponding slots.
2.
Pull the baskets apart.
NOTES:
Do not load silver or silver-plated silverware with stainless steel. These metals can be damaged by contact with each other during washing.
Some foods (such as salt, vinegar, milk products, fruit juices, etc.) can pit or corrode silverware. Run a rinse cycle if you do not have a full load to wash immediately.
DISHWASHER USE
Use suggested loading patterns, as shown, to increase washability of your silverware.
This silverware basket can be separated and placed into the bottom rack in several locations. Load silverware in all sections or just one, depending upon your load.
When covers are up, mix items in each section of the basket with some pointing up and some down to avoid nesting. Spray cannot reach nested items.
IMPORTANT:
pointing down.
Always load sharp items (knives, skewers, etc.)
Detergent Dispenser
The detergent dispenser has 2 sections. The smaller Pre-Wash section empties detergent into the dishwasher when you close the door.
1
2
1. Cover latch
2. Main Wash section
3. Pre-Wash section
4. Cover
The larger Main Wash section automatically empties detergent into the dishwasher during the wash. (See the “Cycle Selection Charts.”)
Use automatic dishwashing detergent only. Other detergents can produce excessive suds that can overflow out of the dishwasher and reduce washing performance.
Add detergent just before starting cycle.
Store tightly closed detergent in a cool, dry place. Fresh automatic dishwasher detergent results in better cleaning.
NOTE:
Do not use detergent if you have selected a rinse cycle.
10
Filling the dispenser
1.
If the dispenser cover is closed, open the cover by rotating the cover latch.
Soft Water (0-2 grains per gallon)
[typical water softener water]
Soil Level Main Wash Pre-Wash
2.
Fill the Main Wash section with detergent. See the following section “How much detergent to use.”
3.
Fill the Pre-Wash section, if needed. (See “Cycle Selection Charts.”)
4.
Close the dispenser cover.
The cover will open during the cycle to dispense the detergent.
How much detergent to use
The amount of detergent to use depends on the hardness of your water and the type of detergent. If you use too little, dishes won’t be clean. If you use too much in soft water, glassware will etch.
Water hardness can change over a period of time. Find out your water’s hardness by asking your local water department, water softener company, or county extension agent.
Main Wash Pre-Wash
1 2
3
1. Use 8 tsp (40 mL) [full])
2. Use 7 tsp (35 mL)
3. Use 6 tsp (30 mL)
4. Use 4 tsp (20 mL) [full]
5. Use 2 tsp (10 mL)
Lightly-soiled/Pre­rinsed dishloads
Normally-soiled dishloads
Heavily-soiled dishloads
6 tsp (30 mL) Empty
6 tsp (30 mL) 2 tsp (10 mL)
7 tsp (35 mL) 4 tsp (20 mL)
Medium Hard Water (2-6 grains per gallon)
[some city water]
Soil Level Main Wash Pre-Wash
Lightly-soiled/Pre­rinsed dishloads
Normally-soiled dishloads
Heavily-soiled dishloads
6 tsp (30 mL) 2 tsp (10 mL)
6 tsp (30 mL) 4 tsp (20 mL)
7 tsp (35 mL) 4 tsp (20 mL)
Hard Water (7-12 grains per gallon)
[well water and some city water]
Soil Level Main Wash Pre-Wash
All soil types 7 tsp (35 mL) 4 tsp (20 mL)
Very Hard Water (13 grains per gallon and above)
Soil Level Main Wash Pre-Wash
4 5
All soil types 8 tsp (40 mL) [full] 4 tsp (20 mL) [full]
Turn the rinse aid dispenser to a higher setting as needed. (See
[hard well water]
“Rinse Aid Dispenser” section.) It might be necessary to use the Pots Pans or Normal cycle with the Hi Temp Scrub option for best wash performance in very hard water.
NOTE:
Fill amounts shown are for standard powdered detergent. Amounts may vary if you use liquid or concentrated powdered detergent. Tablet detergents should be placed in the main wash section of the detergent dispenser with the cover closed. Follow instructions on the package when using liquid dishwasher detergent, concentrated powdered detergent or tablet detergent.
11
Rinse Aid Dispenser
Rinse aids prevent water from forming droplets that can dry as spots or streaks. They also improve drying by allowing water to drain off of the dishes during the final rinse by releasing a small amount of the rinse aid into the rinse water. Your dishwasher is designed to use a liquid rinse aid. Do not use a solid or bar-type.
Filling the dispenser
The rinse aid dispenser holds 4.8 oz (145 mL) of rinse aid. Under normal conditions, this will last for about three months. You do not have to wait until the dispenser is empty to refill it. Try to keep it full, but be careful not to overfill it.
1.
Make sure the dishwasher door is fully open.
2.
Turn the dispenser knob to the left and lift it out.
3.
Add rinse aid until the indicator window looks full.
4.
Clean up any spilled rinse aid with a damp cloth.
5.
Replace the dispenser knob.
Rinse aid setting
The amount of rinse aid released into the final wash can be adjusted. The factory setting is at 2. For most water conditions set the adjuster to 1 or 2. If there are rings or calcium (hard water) spots on dishes, try a higher setting.
6
-
5
-
-
4
3
x
2
a
1
m
To adjust the setting
Remove the dispenser knob, then turn the adjuster inside the dispenser to the desired setting.
Dishwasher Efficiency Tips
Hot water dissolves and activates the dishwashing detergent. Hot water also dissolves grease on dishes and helps glasses dry spot-free. For best dishwashing results, water should be 120°F (49°C) as it enters the dishwasher. Loads may not wash as well if the water temperature is too low. Water that is too hot can make some soils harder to remove and cause certain detergent ingredients not to function. If your water heater is located far from the dishwasher, it may be necessary to run the hot water at the faucet closest to the dishwasher to minimize the amount of cold water in the water line.
To check water temperature
1.
Run hot water at the faucet closest to your dishwasher for at least 1 minute.
2.
Place a candy or meat thermometer in a glass measuring cup.
3.
Check the temperature on the thermometer as the water is running into the cup.
To save water, energy and time, do not rinse dishes before putting them into the dishwasher.
Use a delay feature (on some models) to run your dishwasher during off-peak hours. Local utilities recommend avoiding heavy usage of energy at certain times of day.
During the summer, run your dishwasher at night. This reduces daytime heat buildup in the kitchen.
Use a rinse aid to improve drying.
Use cycles or options that add extra heat to the wash or rinse portion of the cycle only when needed.
If your home is equipped with a water softener, you may want to avoid starting the dishwasher during the regeneration of the softener, as this may contribute to poor wash performance.
12
Control Panel
SMART
WASH
POTS
PANS
CYCLES
NORMAL
WASH
CHINA
GENTLE
QUICK
RINSE
HI TEMP
SCRUB
OPTIONS
SANI
RINSE
Cycle Selection Charts
Select the wash cycle and options desired. Or press START to use the same cycle and options as the previous cycle.
NOTE:
If the last cycle you completed was a rinse cycle, the dishwasher will run the last full wash cycle and options that you selected when you press Start.
A “●” shows what steps are in each cycle. Temperatures indicate where extra heat is added. Water usage is shown in
U.S.
gallons/liters.
AIR
DRY
LOCK ON
O
Wash Main
130°F
(54°C)
HOURS
WASHING
SENSING
DRYING
SANITIZED
CLEAN
2 4 8
DELAY
HOURS
Use this cycle for hard­to-clean, heavily-soiled pots, pans, casseroles, and regular tableware.
Wash
140°F
(60°C)
Rinse Rinse Final
CANCEL
DRAIN
Heated
Rinse
140°F (60°C)
START
Use both detergent dispenser sections.
Dry Minimum
Time (min)
89* 6.9-10.4/
Water Usage (gal/L)
26.1-39.4
Dish-
load
Full
Par-
tial
Use this cycle for all day-to-day soil types when washing full to partial dishloads. During the cycle, the sensors will determine water temperature, wash time, and water amount based on the soil level and the dishload size. During the main wash, the wash action will repeatedly pause for several seconds.
Soil
Wash Main
Level
Sensed
Heavy
Light
Heavy
Light
Wash
●●
140°F
(60°C)
●●
130°F
(54°C)
●●
130°F
(54°C)
●●
120°F
(49°C)
Rinse
Rinse Final
or
Purge
Purge
Use both detergent dispenser sections when washing a full soiled dishload.
Use one detergent dispenser section when washing lightly soiled partial dishloads.
Heated
Rinse
140°F (60°C)
140°F (60°C)
140°F (60°C)
140°F (60°C)
Dry Mini-
Water
mum
Usage
Time
(gal/L)
(min)
101* 8.8-10.1/
33.3-38.2
93* 6.9/26.1
93* 6.9-8.4/
26.1-31.8
68* 5.9/22.3
Wash Main
Rinse Main
Wash
●●
130°F (54°C)
Wash
120°F (49°C)
Use this cycle for loads with normal amounts of food soil. (The energy-usage label is based on this cycle.) During the main wash, the wash action will repeatedly pause for several seconds.
Rinse Rinse Final
Heated
Rinse
140°F (60°C)
Use this cycle for china and crystal. This cycle uses a light wash and gentle dry. During the heated dry, the heating element cycles on and off.
Rinse
or Purge
Purge
Rinse Final
Heated
Rinse
135°F (57°C)
Use both detergent dispenser sections.
Dry Minimum
Time (min)
90* 6.9-10.1/
Water Usage (gal/L)
26.1-38.2
Use main detergent dispenser section.
Dry Minimum
cycled
Time (min)
71* 5.9-8.4/
Water Usage (gal/L)
22.3-31.8
13
Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.
Wash Rinse Main
*
If the incoming water temperature is less than the recommended temperature or food soils are hearvy, the cycle will automatically compensate by adding time, heat and water as needed.
Wash
Rinse Final
Do not use detergent with this cycle.
Heated
Rinse
Dry Time
(min)
Water Usage (gal/L)
10 1.8-2.7/
6.8-10.2
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.
To add items
1.
Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.
2.
Open the door. If the detergent dispenser cover is still closed, add the item.
3.
Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5-second pause.
Canceling a Cycle
Anytime during a cycle, press
CANCEL/DRAIN glows. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. The light goes off when the dishwasher finishes the drain.
To stop the drain
You can press CANCEL/DRAIN again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL/DRAIN before starting the dishwasher to clear all options and cycles.
Changing a Cycle or Setting
During the first minute of a cycle
1.
Press a new cycle and/or options.
2.
Check the detergent dispensers. They must be filled properly for the new cycle.
Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to use the same cycle and option(s) as the previous wash cycle.
NOTE:
If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.
Hi Temp Scrub
Select this option to heat the water during parts of the cycle. Hi Temp Scrub heats the water to 145ºF (63ºC) in the main wash. Heating the water helps improve washing results. Hi Temp Scrub is useful when loads contain baked-on food.
This option adds heat and wash time to the cycle. When Hi Temp Scrub is used with the Pots Pans cycle, water is also added to the cycle.
NOTE:
Hi Temp Scrub is an option with Smart Wash, Pots Pans and Normal Wash.
After the first minute of a cycle
1.
Press
CANCEL/DRAIN glows. Your dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely.
2.
Check the detergent dispensers. They must be filled properly for the new cycle.
3.
Close the door.
4.
Press a new cycle and/or options.
5.
Press START.
14
Sani Rinse
Select this option to raise the water temperature in the final rinse to approximately 155°F (68°C). Sani Rinse adds heat and time to the cycle. This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.
NOTE:
Sani Rinse is an option with SmartWash, Pots Pans, and Normal Wash. Only these sanitization cycles have been designed to meet the NSF/ANSI requirements.
Air Dry
Select this option to dry without heat. Air drying is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.
LOCK ON
The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE:
Quick Rinse automatically uses this option. Air Dry is an
option with all other cycles.
Lock On
Use the Lock On to prevent unintended use of the dishwasher. You can also use the lock feature to prevent unintended cycle or option changes during a cycle.
LOCK ON
When LOCK ON is lit, all buttons are disabled.
NOTES:
To turn on the Lock
Press and hold
The dishwasher door can be opened while the controls are locked.
You can turn on the Lock while the dishwasher is running.
LOCK ON
Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle Status indicators.
W
ASHING
S
ENSING
D
RYING
S
ANITIZED
C
LEAN
Sensing
Your dishwasher senses the soil level on the dishes. Soil level determines the length of some cycles, the amount of heat added to the wash or rinse, and the cycle needed for the load. SENSING glows during the soil sensing parts of the cycle. Wash action continues while sensing occurs.
Sanitized
If you select the Sani Rinse option, SANITIZED glows when the Sani Rinse cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted. The light goes off when you open the door.
Clean
CLEAN glows when a cycle is finished. The light turns off when you open the door or press CANCEL/DRAIN.
Active Vent
The Active Vent reduces the sounds from your dishwasher. The cover closes after the cycle starts. Filling and washing sounds are reduced. The Active Vent opens when wash action ends and vapor is vented into room.
NOTE
: There is a slight noise when the cover closes or opens.
This is normal.
for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during off-peak hours.
To delay the start
1.
Close the door.
2.
Select a wash cycle and options.
3.
Press DELAY HOURS 1 time for a 2-hour delay, 2 times for a 4-hour delay, or 3 times for an 8-hour delay.
HOURS
2 4 8
DELAY
HOURS
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.
4.
Press START.
NOTE:
To cancel the delay, press CANCEL/DRAIN until all Delay
Hours lights are off.
Drying System
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
IMPORTANT:
during drying.
The vapor is hot. Do not touch the vent
15
Overfill Protection Float
The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Material Dishwasher Safe?/Comments
Gold
Glass
No
Gold-colored flatware will discolor.
Yes
Milk glass yellows with repeated dishwasher washing.
Check under the float for objects that may keep the protector from moving up or down.
WASHING SPECIAL
ITEMS
If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.
Material Dishwasher Safe?/Comments
Aluminum
Disposable Aluminum
Bottles and Cans
Cast Iron
China/ Stoneware
Yes
High water temperature and detergents can affect finish of anodized aluminum.
No
Do not wash throwaway aluminum pans in the dishwasher. These might shift during washing and transfer black marks to dishes and other items.
No
Wash bottles and cans by hand. Labels attached with glue can loosen and clog the spray arms or pump and reduce washing performance.
No
Seasoning will be removed and iron will rust.
Yes
Always check manufacturer’s recommendations before washing. Antique, hand-painted, or over-the-glaze patterns may fade. Gold leaf can discolor or fade.
Hollow-Handle Knives
Pewter, Brass, Bronze
Disposable Plastics
Plastics
Stainless Steel
Sterling Silver or Silver Plate
Tin
Wooden Ware
No
Handles of some knives are attached to the blade with adhesives which can loosen if washed in the dishwasher.
No
High water temperatures and detergent can discolor or pit the finish.
No
Cannot withstand high water temperatures and detergents.
Yes
Always check manufacturer’s recommendations before washing. Plastics vary in their capacity to withstand high temperatures and detergents. Load plastics in top rack only.
Yes
Run a rinse cycle if not washing immediately. Prolonged contact with food containing salt, vinegar, milk products, or fruit juice can damage finish.
Yes
Run a rinse cycle if not washing immediately. Prolonged contact with food containing salt, acid, or sulfide (eggs, mayonnaise, and seafood) can damage finish.
No
Can rust.
No
Wash by hand. Always check manufacturer’s instructions before washing. Untreated wood can warp, crack, or lose its finish.
Crystal
16
Yes
Check manufacturer’s recommendations before washing. Some types of leaded crystal can etch with repeated washing.
DISHWASHER CARE
Cleaning
Cleaning the exterior
In most cases, regular use of a soft, damp cloth or sponge and a mild detergent is all that is necessary to keep the outside of your dishwasher looking nice and clean.
Drain Air Gap
Check the drain air gap anytime your dishwasher isn’t draining well.
Some state or local plumbing codes require the addition of a drain air gap between a built-in dishwasher and the home drain system. If a house drain is clogged, the drain air gap protects your dishwasher from water backing up into it.
Cleaning the interior
Hard water minerals can cause a white film to build up on the inside surfaces, especially just beneath the door area.
Do not clean the dishwasher interior until it has cooled. Wear rubber gloves. Do not use any type of cleanser other than dishwasher detergent because it may cause foaming or sudsing.
To clean interior
Make a paste with powdered dishwasher detergent on a damp sponge and clean.
OR
Use liquid automatic dishwasher detergent and clean with a damp sponge.
OR
See the vinegar rinse procedure in “Spotting and filming on dishes” in “Troubleshooting.”
NOTE:
Run a normal cycle with detergent after cleaning the
interior.
The drain air gap is usually located on top of the sink or countertop near the dishwasher. To order a drain air gap, please
1-800-4-MY-HOME
call
NOTE:
The drain air gap is an external plumbing device that is not part of your dishwasher. The warranty provided with your dishwasher does not cover service costs directly associated with the cleaning or repair of the external drain air gap.
®
. Ask for Part Number 300096.
To clean the drain air gap
Clean the drain air gap periodically to ensure proper drainage of your dishwasher. Follow the cleaning instructions provided by the manufacturer. With most types, you lift off the chrome cover. Unscrew the plastic cap. Then check for any soil buildup. Clean if necessary.
Storing
Storing for the summer
Protect your dishwasher during the summer months by turning off the water supply and power supply to the dishwasher.
Winterizing your dishwasher
Protect your dishwasher and home against water damage due to freezing water lines. If your dishwasher is left in a seasonal dwelling or could be exposed to near freezing temperatures, have your dishwasher winterized by authorized service personnel.
17
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
Dishwasher is not operating properly
Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched? Is the right cycle selected? Refer to the “Cycle Selection
Charts.” Is there power to the dishwasher? Has a household fuse
blown or circuit breaker tripped? Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not restart, call for service.
Is the water shut-off valve (if installed) turned on? It is normal for certain cycles to repeatedly pause for several
seconds during the main wash.
Dishwasher will not fill
Is the overfill protection float able to move up and down freely? Press down to release.
Dishwasher seems to run too long
Is the water supplied to the dishwasher hot enough? The dishwasher runs longer while heating water. Refer to the “Dishwasher Efficiency Tips” section.
A delay automatically occurs in some wash and rinse cycles until the water reaches the proper temperature.
Water remains in the dishwasher
Is the cycle complete?
Detergent remains in the covered section of the dispenser
Is the cycle complete? Is the detergent lump-free? Replace detergent if necessary. Is the bottom rack installed properly with the bumpers in the
front? Refer to the “Parts and Features” section. Reinstall the rack if necessary.
White residue on the front of the access panel
Was too much detergent used? Refer to the “Detergent Dispenser” section.
Is the brand of detergent making excess foam? Try a different brand to reduce foaming and eliminate buildup.
Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle once or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a vinegar rinse as described in “Spotting and filming on dishes” later in this Troubleshooting guide.
Condensation on the kitchen counter (built-in models)
Is the dishwasher aligned with the countertop? Moisture from the vent in the dishwasher console can form on the counter. Refer to the Installation Instructions for more information.
Dishes are not completely clean
Food soil left on the dishes
Is the dishwasher loaded correctly? Refer to the “Dishwasher Loading” section.
Is the water temperature too low? For best dishwashing results, water should be 120°F (49°C) as it enters the dishwasher. Refer to the “Dishwasher Efficiency Tips” section.
Did you use the correct amount of fresh detergent? Use recommended dishwasher detergents only. Refer to the “Detergent Dispenser” section. Detergent must be fresh to be effective. Store detergent in a cool, dry area. Heavy soil and/ or hard water generally require extra detergent.
Do you have hard water? You may need to increase the amount of detergent you are using. Refer to the “Detergent Dispenser” section. Also, you may need to switch to a detergent with a phosphorous content of 8.7%.
Is detergent caked in dispenser? Use fresh detergent only. Do not allow detergent to sit for several hours in a wet dispenser. Clean dispenser when caked detergent is present.
Is the pump or spray arm clogged by labels from bottles and cans? If you wash bottles and cans in your dishwasher, check for labels clogging the pump or spray arm.
Is the home water pressure high enough for proper dishwasher filling? Home water pressure should be 20 to 120 psi (138 to 828 kPa) for proper dishwasher fill. A booster pump on the water supply can be added if pressure is too low.
Are high suds slowing the wash arm? Never use soap or laundry detergents. Use recommended dishwasher detergents only.
18
Loading...
+ 42 hidden pages