Kenmore 66513692N411, 66513692N412, 66513693N411, 66513693N412, 66513699N411 Installation Guide

...

Kenmore 66513692N411, 66513692N412, 66513693N411, 66513693N412, 66513699N411, 66513699N412, 66514833N510, 66514833N511, 66514823N511, 66514815N612, 66514819N610, 66514819N612, 66514823N510, 66514815N611, 66514813N610, 66514813N611, 66514813N612, 66514815N610, 66514812N612, 66514799N510, 66514799N512, 66514812N610, 66514793N512, 66514792N512, 66514793N510, 66514793N511, 66514759N512, 66514762N510, 66514763N510, 66514769N510, 66514792N510, 66514792N511, 66514759N511, 66514754N511, 66514754N512, 66514759N510, 66514754N510, 66514753N511, 66514753N512, 66514753N510, 66514752N511, 66514749N511, 66514749N512, 66514749N513, 66514742N511, 66514742N512, 66514742N513, 66514743N510, 66514743N511, 66514743N512, 66514749N510, 66514712N710, 66514713N710, 66514715N710, 66514719N710, 66512833K313, 66512833K314, 66512803K312, 66512793K312, 66512789K312, 66512783K312, 66512783K313, 66512782K312, 66512782K313, 66512779K313, 66512779K314, 66512776K314, 66512774K314, 66512774K313, 66512773K314, 66512772K314, 66512769K314, 66512763K313, 66512763K314, 66512762K313, 66512762K314, 66514703N511, 66514703N512, 66514579N610, 66514579N611, 66514579N612, 66514573N610, 66514573N611, 66514573N612, 66514565N611, 66514569N610, 66514572N610, 66514563N611, 66514565N610, 66514562N611, 66514552N610, 66514553N610, 66514543N711, 66514545N710, 66514545N711, 66514549N710, 66514542N710, 66514542N711, 66514543N710, 66514522N611, 66514523N610, 66514523N611, 66514529N610, 66514529N611, 66514522N610, 66513549N411, 66513549N412, 66513549N413, 66513549N414, 66513543N411, 66513543N412, 66513543N413, 66513542N414, 66513542N411, 66513542N412, 66513542N413, 66513409N411, 66513409N412, 66513403N413, 66513403N412, 66513403N411, 66513402N413, 66513402N412, 66513402N411, 66513229N414, 66513229N413, 66513229N411, 66513229N412, 66513223N412, 66513223N413, 66513223N414, 66513223N411, 66513222N414, 66513222N411, 66513222N412, 66513222N413, 66514703N510, 66514752N512, 66514752N510, 66514742N510, 66512793K313, 66512789K313, 66512773K313, 66512772K313, 66512769K313, 66514572N612, 66514572N611, 66514563N610, 66514562N610, 66514559N610, 66514549N711 Installation Guide

Installation instructions

Instrucciones de instalaci6n instructions d'installation

Engllsh / Espa_ol / Fran_als

I en more Elite

e ®

P/N W10747788A Sears Brands Management Corporation

Hoffman Estates, IL 60179 U,S,A, www.kenmore.com

www, sears,com

Sears Canada tnc, Toronto, Ontario, Canada M5B 2C3

WWW, Sea rs,ca

_/_iC_ =_° _'_ _, _,-o_=,_

H _I I,_,_I

TABLEOF CONTENTS

DISHWASHER SAFETY ............................................................. 2 Make Power Cord Connection .......................................................13

iNSTALLATiON REQUIREMENTS ............................................. 3

Tools and Parts...................................................................................3

Location Requirements ..................................................................... 4

Drain Requirements ...........................................................................6

Water Supply Requirements ...........................................................6

Electrical Requirements ....................................................................6

iNSTALLATION INSTRUCTIONS ............................................. 7

Prepare Cabinet Opening--

Existing Utilities ................................................................................. 7

Prepare Cabinet Opening--New Utilities ................................... 7

Prepare and Route Water Line.......................................................9

Install Drain Hose.............................................................................10

Install Optional Moisture Barrier ..................................................12

Prepare Dishwasher ........................................................................12

Determine Cabinet Opening ..........................................................15

Install Door Handle .........................................................................16

Custom Panel Installation ...............................................................16

Choose Attachment Option ........................................................... 17

Prepare Water Supply Line........................................................... 17

Move Dishwasher Close to Cabinet Opening ............................ 18

Connect to Water Supply ............................................................ 20

Connect to Drain ............................................................................ 20

Make Direct Wire Electrical Connection .....................................21

Secure Dishwasher in Cabinet Opening .....................................23

Complete installation ..................................................................... 24

Check Operation .............................................................................26

If Dishwasher Does Not Operate .................................................26

Additional Tips.................................................................................26

DISHWASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

You Need to= [] Slowly open dishwasher door while someone grasps the rear

of the dishwasher. Remove shipping materials and drain hose. Close dishwasher door until latched.

NOTE: Each dishwasher is tested at the factory and may contain some residual water in the tub as a result of the test.

[] Observe all governing codes and ordinances.

Tip Over Hazard

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

[] Install this dishwasher as specified in these instructions. [] Installation should be performed by a qualified service

technician.

[] The dishwasher must be installed to meet all electrical and

plumbing national and local codes and ordinances.

Care shall be exercised when the appliance is installed or removed, to reduce the likelihood of damage to the power cord.

WARNING= To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is

completely enclosed at the time of installation.

iNSTALLATiON

REQUIREMENTS

Gather the recommended took and parts before starting installation. Read and follow the instructions provided with any

took listed here.

All Installations

Tools Needed:

i F,at:b,ade

e s I screwdriver

5 " i "

_6 and V4 /_) J

nut dr!vers or _S-" JSmal!level

hex sockets __.._.._.._/ _

10', adjustab!e wrench _ 'TorX ®_T20® and, if that opensto _ installing custom _

!'/8" (2 9 Cm)_ fr°nt.pane/s,

Other Useful Items You May Need:

Torx_ T15 screwarivers

Other Parts Needed: (not provided)

%" Compression Household Wiring Twist-on Wire x 3/4 Hose Fitting (Metallic) Strain Relief Connectors

with rubber seal to fit %" (2.2 cm) hole NOTE: Confirm and 90°elbow (required to properly proper size for

(required to secure household connecting your properly connect wiring to the dish- gauge of house- household water washer terminal box) hold wiring to the line to the NOTE: Use only UL .16-gauge wiring

dishwasher)

(Part Number W!0685193)

To order parts, caff 1-800-469-4663, for Part Number above, or see local electrical/plumbing supply retailer for equivalent.

Optional Accessory Parts Available:

Moisture BarderTape NOTE: Moisture barrier tape is

an optional, added level of protection if installing a

dishwasher under a wooden countertop.

(Part Number 4396277)

I i

Listed/CSAApproved in the dishwasher

part ,_ NOTE: Use on y

_- -3_ UL Listed/CSA

Approved parts.

(Part I ff _ Number 4396672) 'J '_

Side Panel Kit For enclosing the side of

the dishwasher when

installing it at the end of your cabinetry.

varies with

color)

(Part Number _

To order parts, call 1-800-469-4663,for PartNumber above.

F,ashlight__ Ba

Pa#s Suppffed:

Drain h0se Drain hose #10 X underc0unter Door clamps (2)Phillips, mounting handle(on

(1 large/red head brackets (2) 5ome

and I smallJ __ screws (2) _m°dels)-

;Ireen) . .

Make sure all these parts are included in the literature package. If parts are not included, call 1-800-422-1230. In Canada, call

1-800-807-6777

First-time Installatlons=

Check local codes. Check existing electrical supply. See the "Electrical Requirements" section, it is recommended that electrical connections be made by a licensed electrical installer.

Additional Tools Needed:

Additional Ports Needed (not provided)

Coppe_ tubing (%" screw:TyPe Opti0na!,L0nge[

O,D. suggested)Clamps Drain Hose Maximum or Rexible Braided 11/2,. 2" length: 12 ft (3.7 m) Water Supply Line (3.8!- 5cm) NOTE:Must meet

Kit (Part Number (3 maximum) AHAM/IAPMO test W10278635RP), Kit . standards, fit 1,

includes Braided (2,5 cm)drain

Hose and %,' connection, and be Compression x 3/4, resistant to heat and

HoseF tt ng detergent,

1-®)TORX,T15, and T20 are registered trademarks of Acument Intellectual Properties, LLC.

To order parts; call 1.800'469_466& for part number above, or see local electrical supply retailer for equivalent.

NOTE: If using a flexible braided hose, replace inlet hose after 5 years to reduce the risk of hose failure. Record hose

installation or replacement dates on the hose for future reference.

For DirectWire For Power Cord

Cabinet Grommet Power Cord Kit

For 11/2"(3.8 cm) Kit typically incHudes power cord,

hoHe in cabinet, metallic strain relief, grommet, and

twist-on wire Connectors.

Number 302797) (___ Id L_

NOTE: Required for metal cabinets. (Part Number 4317824)

oTOorder parts, call 1-800-469-4663, for Part Number above,

r see local electrical supply retailer for equivalent.

Dishwasher must be fully enclosed (top, sides, back, and floor) upon installation. A side panel kit is available from your dealer

for installing your dishwasher at the end of your cabinetry. An optional moisture barrier accessory is also available for

installing underneath a wooden countertop. See the "Tools and Parts" section at the front of the guide for part details and

orders. Check location where dishwasher will be installed. The location

must provide: [] Convenient access for loading and unloading dishes. Corner

locations require a 2" (5.1 cm) minimum clearance between the side of the dishwasher door and the wall or cabinet.

[] Easy access to water, electricity and drain.

[] Grounded electrical supply required. [] Make sure pipes, wires and drain hose are within the

shaded area shown in the "Product and Cabinet Opening Dimensions" section.

[] Do not run drain lines, water lines or electrical wiring

where they can interfere with or contact dishwasher motor or legs.

[] Shelter dishwasher and water lines leading to

dishwasher against freezing. Damage from freezing is not covered by the warranty.

NOTE= If dishwasher will be left unused for a period of time or in a location where it may be subject to freezing, have it

winterized by authorized service personnel.

[]

A square opening for proper operation and appearance.

[]

The cabinet front to be perpendicular to floor.

[]

A level floor. Helpful Hint: If floor at front of opening is not level with

floor at rear of opening, shims may be used to level dishwasher. NOTE: To avoid shifting during dishwasher

operation, shims must be securely attached to the floor. The location where the dishwasher will be installed must

provide clearance between motor and flooring. Motor should not touch the floor.

[] Do not install dishwasher over carpeted flooring.

3/41

/ (1.9 cm)

A. Insulation may be compressed

(not used on all models).

B. For panel-ready models, dishwasher

depth is 24" (60 cm) not including the

3/4"(1.9 cm) custom door panel.

C. Door handles may protrude forward

of the face of the dishwasher; varies by model.

31/2"-41/4''

(8.8 cm - 10.6 cm) /

For 4" (10 cm) toe (9

kick. height of cabinet

opening is 341/2'' (86.3 cm).

NOTE: Shaded areas of cabinet walls show where

utility connections may be installed

D. Measured from the Iowesl point on the

underside of the countertop. May be redu ced to 331W (85.1 cm) by removing

the wheels and 3erforated area of insulation

(blanket) on dishwasher.

E. Minimum. measured from narrowest point of opening.

Check that all surfaces have no protrusions that would prohibit dishwasher installation.

61/4 ''

/15.9cm

[]

A new drain hose is supplied with your dishwasher. If drain hose is not long enough, use a new drain hose with a

maximum length of 12 ft (3.7 m) that meets all current AHAM!IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher. See the "Tools and Parts" section at the front of

the guide for part details and orders.

[]

Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain

hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

[]

Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (50.8 cm) above sub floor or

floor.

[] If required, the air gap should be installed in accordance

with the air gap installation instructions. When you are connecting the air gap, a rubber hose (not provided) will be

needed to connect to the waste tee or disposer inlet.

[] Use 1/2" minimum I.D. drain line fittings

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical

Code, ANSI!NFPA 70 - latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association 1Batterymarch Park Quincy, MA 02169-7471

You Must Have: [] 120-volt, 60 Hz, AC-only, 15- or 20-amp, fused electrical

supply.

[] Copper wire only. [] A maximum of two field wiring supply conductors (12 AWG

largest size) plus one grounding conductor are permitted in the terminal box.

We Recommend: [] A time-delay fuse or circuit breaker.

[] A separate circuit.

If Connecting Dishwasher With A

Power Cord: [] Use UL Listed power cord kit

marked for use with dishwasher. See the "Tools and Parts" section at the front of the guide for

part details and orders. Power cord must plug into a grounded 3

prong outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all

local codes and ordinances.

If Connecting Dishwasher With Direct Wiring:

[] Use flexible, armored or

nonmetallic sheathed, copper wire with grounding wire that meets the

wiring requirements for your home and local codes and ordinances.

[] Use a UL Listed/CSA Approved metallic strain relief. See the

"Tools and Parts" section at the front of the guide for part details and orders.

[]

A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure can be verified by a licensed plumber.

[]

120°F (49°C) water at dishwasher.

[]

3/8"O.D. copper tubing with compression fitting or flexible braided water supply line. See the "Tools and Parts" section

at the front of the guide for part details and orders. NOTE: 1/2"minimum plastic tubing is not recommended.

[]

A 90 ° elbow with 3/4"hose connection with rubber washer. See the "Tools and Parts" section at the front of the guide for

part details and orders.

[]

Do not solder within 6" (15.2 cm) of the water inlet valve.

iNSTALLATiON iNSTRUCTiONS

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

i Discoaaect electric al POwe[ atthe fuse bO× or c!rcu!t

Cable

When removing a previous dishwasher, be sure to avoid damaging the existing power cord, drain line, and water line

connected to the dishwasher.

If the water line and the cable extend to the locations shown,

proceed to the "install Drain Hose" section. If they do not reach far enough, follow the instructions in the "Prepare Cabinet

Opening--New Utilities" section.

YeS --Follow instructions )n the "Prepare Cabinet

Opening--Existing Utilities section. NO Follow instructions in the "Prepare Cabinet

Opening--New Utilities" section,

Existing utility hookups

Prepare And Route The Electrical Supply

What type of electrical

connection will you use?

[

Option A_ Power Cord =

Option B_Direct Wire

NOTE." A grounded 3 prong outlet is required inside a cabinet next to the dishwasher cabinet opening.

Drill a 11/2" (3.8 cm) hole in cabinet side or rear. See the "Product and Cabinet Opening Dimensions" section.

Helpful Tip."Wiring the dishwasher will be easier if you route the cable into the cab}net opening from the right-hand s}de.

Drill a 11/2"(3.8 cm) hole in right-hand cabinet side or rear. See the "Product and Cabinet Opening Dimensions" section.

Wood cabinet: Sand the hole until smooth.

Metal cabinet: Cover edges of hole with grommet included with power cord kit.

See the "Tools and Parts" section at the front of the guide for part details.

Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover edges of hole with a grommet.

See the "Tools and Parts" section at the front of the guide for part details.

Route cable from power supply through cabinet hole (cable must extend to the right front side of cabinet opening). Tape

cable to the floor in area shown. This will prohibit cable from moving when dishwasher is moved into cabinet opening.

+ 18 hidden pages