Kenmore 6.0 cu. ft. Electric Dryer - White Specifications

Shown with washer 26-20022

Kenmore Dryer

Electric Dryer

White 26-60022

Gas Dryer

White 26-70022

• 6.0 cu. ft. capacity

• Rotary controls

• 11 drying cycles

• Timed drying

• Reversible side-swing door

26-60022, 26-70022

Page 1 of 2

SELECTION KENMORE

Electric Dryers:

White 26-60022

Gas Dryers:

White 26-70022

DRYER FEATURES

Capacity (Cu. Ft.) 6.0

CYCLES AND OPTIONS 11 / 0

Specialty Cycles and Options Timed Dry

Touch Up •

Air Dry •

Timed Drying 10-20-30-40-50-60 Min.

CONVENIENCE FEATURES

Door Configuration Reversible

GENERAL FEATURES

Controls Mechanical

Drum Finish Powder-Coated

/3 H.P. Motor •

Top Finish Powder-Coated

Leveling Legs •

Electric Venting Rear

Gas Venting Rear

Electric Dryer Rating: Volts / Hz / Amps 240 / 60 / 30

Electric Dryer Circuit Req. (60 Hz) 30

Gas Dryer Rating: Volts / Hz / Amps 120 / 60 / 15 – 20

Gas Burner BTU / Hour 22,000

LP Gas Conversion Kit 26-49572

Gas Pipe Size (O.D. Inches)

Shipping Weight (Approx. Lbs.) Electric / Gas 122 / 125

WARRANTY

1-Year Limited Warranty – Mechanical and Electrical Parts Parts & Labor

If used for other than private family purposes, warranty applies for only 90 days.

Available February 2011

16610

Dimensions, Inches A B C D

26-6/ 70022 43.375 29 26 22.75

Due to Sears policy of continuous improve ment on its products, Sears reserves the right to change materials and specifications without notice. Before installing, consult installation instructions packed with product for current dimensional and installation data.

26-60022.PDF

Effective 12/06/10

DRYER VENTING RECOMMENDATIONS

Clamps are recommended for wall and dryer connections. Steel clamps designed to resist stretching, with phillips / hex head screw are included one each on elbows and periscopes.

26-98379 — Vent Hood Aluminum body and plastic molded hood with a 4" opening.

26-60022, 26-70022

4" Clearance Behind the Dryer is Preferred for Best Airflow. 2" Clearance is Achieved With Periscopes.

4" CLEARANCE BEHIND DRYER

26-49900 — Over-The-Top™ Kit

Universal solution, 8 foot length. Kit includes two 4 ft. pipe sections with attached elbows, two close elbows, clamps and wall plate.

Page 2 of 2

VENT HOOD TYPE

IMPORTANT NOTE:

Do not use non-metal flexible duct. Also, when installing the venting system, do not exceed the specified length for the vent duct. Venting systems which are longer than specified will accumulate lint, increase drying time and energy use and shorten the life of the dryer.

Number

of 90° Turns

0 64 ft 64 ft 58 ft

1 54 ft 54 ft 48 ft

2 44 ft 44 ft 38 ft

3 35 ft 35 ft 29 ft

4 27 ft 27 ft 21 ft

0 36 ft 36 ft 28 ft

1 31 ft 31 ft 23 ft

2 27 ft 27 ft 19 ft

3 25 ft 25 ft 17 ft

4 23 ft 23 ft 15 ft

POWER CORDS FOR ELECTRIC DRYERS ONLY

26-49387, 26-49787 26-49388, 26-49788

*Complies with 1/1/96 NEC code revision for new construction and remodeling

All Electric Dryers Require Cord

Order Wire Length

26-49387 3 4 ft.

26-49787 3 6 ft.

26-49388* 4 4 ft.

26-49788* 4 6 ft.

Max. Length

of 4" Dia.

Rigid Heavy

Metal Vent

Max. Length

of 4" Dia.

Flexible

Metal Vent

26-49608 — Flexible Pipe 4" x 6' with snap-lock fittings, 90˚ turn takes 1 foot length and 6 inch clearance

26-49609 — Close Elbow Turns 90˚ within 4", rotating collars and snap-lock fittings

2" CLEARANCE BEHIND DRYER

26-49908 — Periscope 0-18"

For outlets that overlap or are very close

26-49904 — Periscope 18-29" Reaches side of most dryers

26-49905 — Periscope 29-50" Reaches top of most dryers

Gas Dryer Connector – Stainless Steel

26-49590

26-49585*

*Los Angeles only

/2" - 3/8" Flex, 5 ft.

/8" - 3/8" Flex, 5 ft.

Due to Sears policy of continuous improve ment on its products, Sears

16610

reserves the right to change materials and specifications without notice. Before installing, consult installation instructions packed with product for current dimensional and installation data.

26-60022.PDF

Effective 12/06/10