Kenmore 596.6928 series, 6992 series, 6993 series, 6994 series, 6995 series Use & Care Manual

Use & Care Guide
Manual de uso y cuidado

Guide d'utilisation et d'entretien

English / Espafiol / Fran_ais

Models/Modelos/Mod_les: 596.6928% 6991% 6992% 6993% 6994% 6995% 6996*

596.6997*, 6998*

I<enmore

,,:,::,:color number, n@nero de colo_, le num@o de la couleur

P/N W10312764A
Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com

www.sears.ca

@

TABLE OF CONTENTS

WARRANTY .................................................................................. 3

REFRIGERATOR SAFETY .............................................................. 4

Proper Disposal of Your Old Refrigerator ......................................... 4

INSTALLATION INSTRUCTIONS ................................................... 5

Unpack the Refrigerator ....................................................................... 5

Location Requirements ........................................................................... 5

Electrical Requirements ......................................................................... 6

Refrigerator Door(s) and Drawer ........................................................ 6

Adjust the Door ....................................................................................... 11

REFRIGERATOR USE .................................................................... 11

Using the Controls .................................................................................. 11

REFRIGERATOR FEATURES ......................................................... 12

Refrigerator Shelves .............................................................................. 12

Crisper and Crisper Cover ................................................................... 12

Crisper Humidity Control ...................................................................... 13

Snack Drawer ......................................................................................... 13

JNDICE

GARANTJA .................................................................................. 18

SEGURIDAD DEL REFRIGERADOR .............................................. 19

C6mo deshacerse adecuadamente de su refrigerador viejo ........ 19

INSTRUCCIONES DE INSTALACION .......................................... 20

Desempaque el refricjerador .............................................................. 20

Requisitos de ubicaci6n ....................................................................... 20

Requisitos el_ctricos .............................................................................. 21

Puerta(s) y caj6n del refrigerador ...................................................... 21

Ajuste la puerta ..................................................................................... 26

USO DE SU REFRIGERADOR ...................................................... 27

Uso de los controles ............................................................................. 27

CARACTERJSTICAS DEL REFRIGERADOR .................................. 27

Estantes del refrigerador ..................................................................... 27

Caj6n para verduras y tapa ............................................................... 28

Control de humedad del caj6n para verduras ............................... 28

Caj6n para bocadillos ......................................................................... 28

FREEZER FEATURES ..................................................................... 13

Freezer Door Shelf ................................................................................. 13

DOOR FEATURES ......................................................................... 13

Dairy Center ............................................................................................ 13

Door Bins.................................................................................................. 13

Full-Width Door Shelf .......................................................................... 14

REFRIGERATOR CARE ................................................................ 14

Cleaning .................................................................................................. 14

Changing the Light Bulb ...................................................................... 14

Power Interruptions ................................................................................ 15

TROUBLESHOOTING ................................................................... 15

Refrigerator Operation ......................................................................... 15

Temperature and Moisture .................................................................. 16

PROTECTION AGREEMENTS ....................................................... 16

ACCESSORIES .............................................................................. 16

SERVICE NUMBERS .................................................. BACK COVER

CARACTERISTICAS DEL CONGELADOR ..................................... 29

Estante de la puerta del congelador ................................................ 29

CARACTERISTICAS DE LA PUERTA ............................................ 29

Centro de productos 16cteos ............................................................... 29

Recipientes de la puerta ...................................................................... 29

Estante de ancho completo de la puerta ......................................... 29

CUlDADO DE SU REFRIGERADOR ............................................. 29

Limpieza ................................................................................................. 29

C6mo cambiar el foco ......................................................................... 30

Cortes de corriente ............................................................................... 30

SOLUCION DE PROBLEMAS ........................................................ 31

Funcionamiento del refrigerador ........................................................ 31

Temperatura y humedad ..................................................................... 32

CONTRATOS DE PROTECCION .................................................. 32

ACCESORIOS .............................................................................. 32

NOMEROS DE SERVlCIO ................................. CONTRAPORTADA

2

TABLEDESMATIERES

GARANTIE .................................................................................. 33

Si:CURITi: DU Ri:FRIGi:RATEUR .................................................. 34

Mise au rebut adequate de votre vieux r_frig_rateur ................... 34

INSTRUCTIONS D'INSTALLATION .............................................. 35

D_ballage du r_frig_rateur ................................................................ 35

Exigences d'emplacement .................................................................. 35

Specifications _lectriques .................................................................... 36

Porte(s) et tiroir du r_frig_rateur ........................................................ 36

Aiustement de la porte ......................................................................... 41

UTILISATION DU RI_FRIGI_RATEUR ............................................ 42

Utilisation des commandes ................................................................. 42

CARACTI_RISTIQUES DU RI_FRIGI_RATEUR ................................ 42

Tablettes du r_frig_rateur ................................................................... 42

Bac _ I_gumes et couvercle ................................................................ 43

R_glage de rhumidit_ dans le bac _ I_gumes ................................ 43

Tiroir _ collations .................................................................................. 43

KENMORE APPLIANCE WARRANTY

ONE YEAR LIMITED WARRANTY
When installed, operated and maintained according to all

instructions supplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date
of purchase, call 1-800-4-MY-HOME _eto arrange for free repair.

This warranty applies for only 90 days from the date of purchase if
this appliance is ever used for other than private family purposes.

THIS WARRANTY COVERS ONLY DEFECTS IN MATERIAL AND
WORKMANSHIP. SEARS WiLL NOT PAY FOR:

1. Expendable items that can wear out from normal use, including
but not limited to filters, belts, light bulbs, and bags.

2. A service technician to instruct the user in correct product
installation, operation or maintenance.

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions supplied

with the product.

5. Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.

6. Damage to or failure of this product caused by the use of
detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.

CARACTI_RISTIQUES DU CONGI_LATEUR .................................. 43

Tablette de porte du cong_lateur ...................................................... 43

CARACTI_RISTIQUES DE LA PORTE ........................................... 44

Compartiment & produits laitiers ...................................................... 44

Balconnets de la porte ........................................................................ 44

Tablette de porte de pleine largeur ................................................. 44

ENTRETIEN DU RI_FRIGI_RATEUR .............................................. 44

Nettoyage ............................................................................................. 44

Remplacement de I'ampoule d'_clairage ........................................ 45

Pannes de courant ................................................................................ 45

DI_PANNAGE .............................................................................. 46

Fonctionnement du r_frig_rateur ...................................................... 46

Temperature et humidit_ .................................................................... 47

CONTRATS DE PROTECTION ..................................................... 47

ACCESSOI RES............................................................................. 47

NUMI_ROS DE SERVICE ............................ COUVERTURE ARRIi:RE

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF

REMEDIES
Customer's sole and exclusive remedy under this limited warranty

shall be product repair as provided herein. Implied warranties,
including warranties of merchantability or fitness for a particular
purpose, are limited to one year or the shortest period allowed by
law. Sears shall not be liable for incidental or consequential
damages. Some states and provinces do not allow the exclusion or
limitation of incidental or consequential damages, or limitations on

the duration of implied warranties of merchantability or fitness, so
these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United
States or Canada.

This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.

Sears Brands Management Corporation

Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2C3

PRODUCT RECORD

Record your complete model number, serial number, and purchase
date. You can find this information on the model and serial number

label located on the product.
Have this information available to help you obtain assistance or

service more quickly whenever you contact Sears concerning your
appliance.

Model number

Serial number

Purchase date

Save these instructions and your sales receipt for future reference.

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Remove doors from your old refrigerator.

SAVE THESE INSTRUCTIONS

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.

• Use two or more people to move and install refrigerator.

[] Disconnect power before installing ice maker (on ice maker

kit ready models only).

• Use a sturdy glass when dispensing ice (on some models).

• Do not hit the refrigerator glass doors (on some models).

Proper Disposalof YourOld Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous -
even if they will sit for "just a few days." If you are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer-

• Take off the doors.

• Leave the shelves in place so that children may not easily climb
inside.

4

INSTALLATION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install
refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For more
information, see "Refrigerator Safety."

• Shelves, bins, door shelf rails, and other feature parts may be
packaged in the Interior FeaturePak. Follow the instructions
contained in the package for proper assembly.

• Dispose of/recycle all packaging materials.

When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for

cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the refrigerator straight out when moving it. Do not wiggle or
"walk" the refrigerator when trying to move it, as floor
damage could occur.

Explosion Hazard

Keep flammable materials and vapors, such as
gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for 1/2"
(1.25 cm) of space on each side and at the top. Allow for 1"
(2.54 cm) of space behind the refrigerator. If your refrigerator has
an ice maker, allow extra space at the back for the water line
connections. When installing your refrigerator next to a fixed wall,
leave 21/2'' (6.3 cm) minimum on the hinge side (some models
require more) to allow for the door to swing open.

NOTE: It is recommended that you do not install the refrigerator
near an oven, radiator, or other heat source. Do not install the
refrigerator in a location where the temperature will fall below
55°F (13°C).

Clean Before Using

After you remove all of the packaging materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
"Refrigerator Care."

important information to know about glass shelves
and covets:

Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.

1/2"(1.25 crn)

]1

/

/

/

21/2"(6.3 cm)

_i ec_s" __,;_t__!eq_,__eme_'_'s_,,

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator to OFF. Press the Freezer
(Down Arrow) until a dash (-) appears in both the Freezer and
Refrigerator displays as shown. Disconnect the refrigerator from
the electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the temperature
controls to the desired setting. See "Using the Controls."

FREEZER REFRIGERATOR

Cold Colder Cold Colder

7 is Coldest Recommended Setting 4Recommended Setting 4

TOOLS NEEDED: 5_6", 3/8", 1/4" hex head socket wrenches, a
#2 Phillips screwdriver, and a flat-blade screwdriver.

IMPORTANT:

• Your refrigerator has a standard door with a freezer door
(Style 1) or freezer drawer (Style 2). Follow the instructions

specific to your model.
All graphics referenced in the following instructions are

included later in this section after "Final Steps." The graphics
shown are for a right-hand swing refrigerator (hinges factory

installed on the right).

• If you only want to remove and replace the door(s), see
"Remove Door(s) and Hinges" and "Replace Door(s) and
Hinges."

• Before you begin, turn the refrigerator control OFF, and remove
food and adjustable door or utility bins from the doors.

Remove and Replace Refrigerator and Freezer Door
or Drawer Handles

Style 1 - Refrigerator Door with Freezer Door
Refrigerator Door

• To remove the handle, pull the trim pieces off each end of the
handle. Using a Phillips screwdriver, remove the handle screws.
Make sure you keep the screws for reattaching the handles. See
Graphic 2.

To replace the handle, align the handle on the door or drawer
as shown. Using a Phillips screwdriver, attach the handle with
the handle screws. Snap the trim pieces onto the end of the

handle.

Freezer Door

• To remove the handle, remove the two screws attaching the
handle to the top of the door. See Graphic 5-1.

• To replace the handle, align the holes in the handle with the
holes in the door. Insert a screw in each of the holes. Tighten the

screws.

Style 2 - Refrigerator Door with Freezer Drawer
Metal handles

• To remove the handle, use a 3/32" or 1/8" Allen wrench to loosen
the two setscrews located on the side of each handle. Pull the

handle straight out from the door or drawer. Make sure you
keep the screws for reattaching the handles. See Metal Handle
graphics 2 and 4.

• To replace the handles, reverse the directions.

Plastic handles

To remove the handle, slide the trim pieces to each end of the
handle and lift off. Using a Phillips screwdriver, remove the
handle screws. Make sure you keep the screws for reattaching
the handles. See Plastic Handle graphics 2 and 4.

To replace the handle, align the handle on the door or drawer
as shown. Using a Phillips screwdriver, attach the handle with
the handle screws. Using your hand, apply firm pressure on the
face of the trim and slide each trim piece toward the center of

the handle.

6

RemoveDoor(s)andHinges

5_6" Hex Head 7"o/oHinge &crew

Style 1

1. Unplug refrigerator or disconnect power.

2. Keep the freezer door closed until you are ready to lift it free
from the cabinet.

NOTE: Provide additional support for the door while the hinges
are being moved. Do not depend on the door gasket magnets
to hold the door in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge
graphic. Lift the refrigerator door free from the cabinet.

4. Remove the center hinge pin and remove the hinge screws as
shown in the Center Hinge graphic. Lift the freezer door free

from the cabinet.

Style 2

1. Unplug refrigerator or disconnect power.

2. Keep the refrigerator door closed until you are ready to lift it
free from the cabinet.

NOTE: Provide additional support for the door while the hinges
are being moved. Do not depend on the door gasket magnets
to hold the door in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge
graphic. Lift the refrigerator door free from the cabinet.

4. Remove the parts for the bottom hinge as shown in Bottom
Hinge graphic.

Reverse Door(s) (optional)

IMPORTANT: If you want to reverse your door so it opens from the
opposite side, follow these steps. If you are not reversing the door,
see "Replace Door and Hinges."

Door Stop Screw Door Handle Seal Screw Front

Flat-Head Handle Screw Cabinet Hinge Hole Plug

Cabinet

1. Remove hinge screws from handle side and move them to
opposite side. See Graphic 1-1.

2. Remove cabinet hinge hole plugs from cabinet top and move
them to opposite side hinge holes as shown in Graphic 1-2.

Refrigerator door

1. Remove the refrigerator handle assembly as shown in
Graphic 2. Keep all parts together.

2. Remove door handle seal screw front. Move to opposite side of
refrigerator door as shown in Graphic 5 or 6, depending on
your style.

3. Remove the door stop. Move it to the opposite side of the
refrigerator door as shown in Graphic 3 or 4, depending on
your style.

4. Attach the refrigerator handle to the opposite side of the
refrigerator door. Replace the handle trim as shown in
Graphic 2.

5. Tighten all screws. Set aside the door until hinges and freezer
compartment door or drawer are in place.

Freezer door

1. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 5-1.

2. Remove freezer door handle seal screw. Move to opposite side
of freezer door.

3. Remove door stop. Move to opposite side of freezer door as
shown. See Graphic 4.

4. Attach handle to opposite side of freezer door.

5. Tighten all screws. Set aside door until bottom hinge is installed
on product.

Replace Door(s) and Hinges

Style 1

1. Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the freezer door.

NOTE: Provide additional support for the door while the hinges
are being moved. Do not depend on the door gasket magnets
to hold the door in place while you are working.

2. Assemble the parts for the center hinge as shown in the Center
Hinge graphic, and tighten all the screws. Replace the
refrigerator door.

3. Assemble the parts for the top hinge as shown in the Top Hinge
graphic. Do not tighten the screws completely.

4. Adiust the doors so that the bottom of the refrigerator door is
aligned with the top of the freezer door. Tighten all screws.

Style 2

1. Replace the parts for the bottom hinge as shown. Tighten
screws,

NOTE: Provide additional support for the door while the hinges
are being moved. Do not depend on the door gasket magnets
to hold the door in place while you are working.

2. Assemble the parts for the top hinge as shown in Top Hinge
graphic. Do not tighten screws completely.

3. Adjust the door so that the bottom of the refrigerator door is
aligned with the top of the freezer drawer. Tighten all screws.

Remove and Replace Freezer Drawer

Final Steps

IMPORTANT: Two people may be required to remove and replace
the freezer drawer. All graphics are included later in this section
after "Final Steps."

Remove Drawer Front

1. Open the freezer drawer to full extension.

2. Loosen the four screws attaching the drawer glides to the
drawer front. See Drawer Front Removal graphic.

NOTE: Loosen screws three to four turns. Keep the screws in the
drawer front.

3. Lift drawer front upward and off the screws. See Drawer Front
Removal graphic.

Replace Drawer Front

1. Slide the drawer glides out of the freezer compartment. Insert
the screws in the top of the drawer front into the slots in the
drawer brackets. See Drawer Front Replacement graphic.

2. Pull the drawer brackets toward you to insert the two screws in
the bottom of the drawer front into the brackets. See Drawer

Front Replacement graphic.

3. Completely tighten the four screws.

1. Check all holes to make sure that hole plugs and screws are in
place. Reinstall top hinge cover as shown in Top Hinge graphic.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug into a grounded 3 prong outlet.

3. Return all removable door parts to door and food to
refrigerator.

Style1-FreezerDoor

Top Hinge

A. H_ge Cover Screw
B, Top Hinge Cover

C, 5/18" Hex-Head Hinge Screws
D, Top Hinge

Center Hinge

A, Hinge Pin Cover
B, Center Hinge

C. Hinge Screws

A

'1

A, Cabinet Hinge Hole Plugs

B

A. _" Hex-Head Hinge Screws

A. Handle Trim

A

B

C

B. Refrigerator Door Handle
C. Flat-Head Handle Screws

A....................................._ :_-_

A. Door Hinge Hole Plug

Front View

Side View

\

A. Door Stop Screws
B. Door Stop

I I

A B

A

A. Flat-Head Handle

Screws

Door Handle
Seal Screw

Front

_?? .............A

A. Door Hinge Hole Plugs

Style 2-Freezer Drawer

Top Hinge

t" A

A, Hinge Cover Screw

B, Top Hinge Cover
C, s/18"Hex-Head Hinge Screws

D. Top Hinge

Plastic Handle

A. Handle Trim
B. Flat-Head

Handle Screws

C. Refrigerator

Door Handle

A. Cabinet Hinge Hole Plugs

Bottom Hinge

A. Hinge Pin Cover
B, Bottom Hinge
C. Hinge Screws

Metal Handle @

A

3 1

A. ½_" or _" Setscrew

A. _2" or _" Setscrew

Plastic Handle

A B C B A

:HaFlSH;2%ndleScrewe

C. Freezer Door Handle

Door Handle
Seal Screw
Front

/

/

J

/

A. Hinge Screws

Front View

A, Door Stop Screws

B. Door Stop

0

Side View

_1

A B

A. Loosen 4 Door Bracket Screws

10

Adi _S_ B_'__ ....

Your refrigerator has two front adjustable rollers located at the
base of the refrigerator. If your refrigerator seems unsteady or you
want the door to close more easily, use the instructions below.

Style 1-Freezer Door Models

1. Remove the base grille. Grasp the grille firmly and pull it
toward you.

2. Remove the bracket cover. Insert the eraser end of a pencil in
the cover notch. Apply slight downward pressure to the
notched side of the cover while swinging it off.

3.

Using a screwdriver or 3/8" hex driver, turn the roller adjustment
screw on each side to raise or lower that side of the

refrigerator.
NOTE: Having someone push against the top of the refrigerator

takes some weight off the adjustment screws and rollers. This
makes it easier to turn the screws It may take several turns of
the roller adjustment screw to adjust the tilt of the refrigerator.

• To raise, turn the roller adjustment screw to the right.

• To lower, turn the roller adjustment screw to the left.

4.

Turn the brake foot clockwise until it is firmly against the floor
to keep the refrigerator from rolling forward when the freezer
door is pulled open.

Style 2-Freezer Drawer Models

1. Remove the base grille. Grasp the grille firmly and pull it
toward you.

2. Using a 1/4" hex driver, turn the leveling screw on each side to
raise or lower that side of the refrigerator.

NOTE: Having someone push against the top of the refrigerator
takes some weight off the leveling screws. This makes it easier
to turn the screws. It may take several turns of the leveling
screw to adjust the tilt of the refrigerator.

• To raise, turn the leveling screw clockwise.

• To lower, turn the leveling screw counterclockwise.

/

A. Leve/ing screw

3. Open the door again to make sure that it closes as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both leveling screws clockwise. It may take several
more turns, and you should turn both screws the same amount.

4. Replace the base grille.

A. Roller adjustment screw

B. Brake foot

5.

Open the door again to make sure that it closes as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both roller adjustment screws to the right. It may take
several more turns, and you should turn both adjustment screws

the same amount.

6.

Replace the bracket cover. Place the bracket cover into the
outer edge, swing the cover toward the cabinet and snap it into
place.

Z Replace the base grille.

REFRIGERATOR USE

° Sl .......0_ II_@L>

The temperature controls are located at the top front of the
refrigerator or freezer compartments.

IMPORTANT:

• When the power is on, the temperature display shows the
actual temperature of the compartment.

• Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has
cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool the
compartments any faster.

• The recommended settings should be correct for normal
household refrigerator use. The controls are set correctly when
milk or juice is as cold as you like and when ice cream is firm.

• If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked
before adjusting the controls.

11

Temperature Controls

For your convenience, the temperature controls are preset at the
factory. When you first install your refrigerator, make sure the
controls are still set to the recommended setting as shown.

Recommended Setting "4"

FREEZER

Cold

Recommended Setting 4 7 is Coldest

To Turn Off/On:
Press the freezer down arrow touch pad until a dash (-) appears in

both the refrigerator and freezer displays. Neither compartment
will cool.

Colder

REFRIGERATOR

Cold Colder

Recommended Se%ing 4

Adjusting Controls

If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the chart below as a
guide.

Press the up or down arrow touch pads to adjust the temperature.
Except when starting the refrigerator, do not adjust either control
more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.

The shelves in your refrigerator are adjustable to meet your
individual storage needs.

Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open, and save energy.

Shelves and Shelf Frames

To remove and replace a shelf/shelf frame:

1. Remove the shelf/frame by tilting it up at the front and lifting it
out of the shelf supports.

2. Replace the shelf/frame by guiding the rear shelf hooks into
the shelf supports. Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports.

3. Lower the front of the shelf and make sure that the shelf is in
position.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm REFRIGERATOR Control

one setting higher

FREEZER too warm/too little ice FREEZER Control one

setting higher

REFRIGERATOR too cold REFRIGERATOR Control

one setting lower

FREEZER too cold FREEZER Control one

setting lower

REFRIGERATOR FEATURES

Your model may have some or all of these features.

important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

To remove and replace the crisper(s):

1. Slide crisper(s) straight out to the stop. Lift the front of the
crisper(s) and slide out the rest of the way.

2. Replace the crisper(s) by sliding back in fully past the drawer
stop.

To remove the crisper(s) cover:

1. Remove crisper(s).

2. Holding the glass insert firmly with one hand, press up in center
of glass insert until it rises above the plastic frame. Gently slide
the glass insert forward to remove.

3. Lift the cover frame up and remove it.

12

To replace crisper(s) cover:

1. Fit back of cover frame into supports on side walls of the
refrigerator and lower the front of the cover frame into place.

2. Slide rear of glass insert into cover frame and lower front into
place.

You can control the amount of humidity in the moisture-sealed
crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best storage of
fruits and vegetables with skins.

• Fruit: Wash, let dry and store in refrigerator in plastic bag or
crisper. Do not wash or hull berries until they are ready to use.

Sort and keep berries in original container in crisper, or store in
a loosely closed paper bag on a refrigerator shelf.

• Vegetables with skins: Place in plastic bags or plastic container
and store in crisper.

HIGH (closed) keeps moist air in the crisper for best storage of
fresh, leafy vegetables.

• Leafy vegetables: Wash in cold water, drain and trim or tear
off bruised and discolored areas. Place in plastic bag or plastic
container and store in crisper.

To remove and replace the snack drawer:

1. Pull drawer out to full extension. Tilt up front of drawer and pull
straight out.

2. Replace the snack drawer by inserting the drawer into the
frame rails and push the drawer back into place.

FREEZERFEATURES

Your model may have some or all of these features.

F_'e®ze__Doo__Shef

Convenient storage for smaller frozen food items.
To remove and replace the shelf:

1. Remove the shelf by sliding it up and pulling it straight out.

2. Replace the shelf by sliding it in above the desired support and
pushing it down until it stops.

DOOR FEATURES

Your model may have some or all of these features.

To remove and replace the dairy center:

1. Remove the dairy center by raising and holding the cover up
while lifting the dairy center up and pulling it straight out.

2. Replace the dairy center by sliding it in above the desired
support and pushing it down until it stops.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,

freeze the meat.

Fresh fish or shellfish ............................... use same day as purchased

Chicken, ground beef, variety meats (liver) ........................... 1-2 days

Cold cuts, steaks/roasts ............................................................ 3-5 days

Cured meats ............................................................................. 7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.

©oo

To remove and replace the bins:

1. Remove the bin by lifting it up and pulling it straight out.

2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.

13

To remove and replace the shelf:

1. Remove the shelf by sliding it up and pulling it straight out.

2. Replace the shelf by sliding it in above the desired support and
pushing it down until it stops.

REFRIGERATOR CARE

3.

Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water.

• To keep your stainless steel refrigerator looking like new
and to remove minor scuffs or marks, it is suggested that
you use the manufacturer's approved Stainless Steel
Cleaner and Polish. To order the cleaner, see "Accessories."

IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come into

contact with any plastic parts such as the trim pieces, dispenser
covers or door gaskets. If unintentional contact does occur,
clean plastic part with a sponge and mild detergent in warm
water. Dry thoroughly with a soft cloth.

4.

There is no need for routine condenser cleaning in normal home
operating environments. If the environment is particularly
greasy or dusty, or there is significant pet traffic in the home,
the condenser should be cleaned every 2 to 3 months to ensure
maximum efficiency.

If you need to clean the condenser:

• Remove the base grille.

• Use a vacuum cleaner with a soft brush to clean the grille,
the open areas behind the grille and the front surface area

of the condenser.

• Replace the base grille when finished.

5.

Plug in refrigerator or reconnect power.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid buildup
of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator-
NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to
replace the bulb with an appliance bulb of the same size, shape,

and wattage (no greater than 40 watts).

1. Unplug the refrigerator or disconnect power.

2. Remove the light shield (on some models).

• Top of the compartment - Slide the light shield toward the
back of the compartment to release it from the light

assembly.

3. Replace the burned-out bulb(s) with an appliance bulb(s) no
greater than 40 watts.

4. Replace the light shield.

• Top of the compartment - Insert the tabs on the shield into

the liner holes on each side of light assembly. Slide the
shield toward the front until it locks into place.

NOTE: To avoid damaging the light shield, do not force the

shield beyond the locking point.

5. Plug in refrigerator or reconnect power.

14

If the power will be out for 24 hours or less, keep the door or doors
closed (depending on your model) to help food stay cold and

frozen.
If the power will be out for more than 24 hours, do one of the

following:

• Remove all frozen food and store it in a frozen food locker.

• Place 2 Ibs (907 g) of dry ice in the freezer for every cubic foot
(28 L) of freezer space. This will keep the food frozen for 2 to

4 days.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

• If neither a food locker nor dry ice is available, consume or can
perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled
one. A freezer full of meat stays cold longer than a freezer full of

baked goods. If you see that food contains ice crystals, it may be
refrozen, although the quality and flavor may be affected. If the
condition of the food is poor, dispose of it.

The refrigerator will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an e×tension cord.
Failure to follow these instructions can result in death_

fire_ or electrical shock.

• Power cord unplugged? Plug into a grounded 3 prong outlet.

• Is outlet working? Plug in a lamp to see if the outlet is working.

• Household fuse blown or circuit breaker tripped? Replace the
fuse or reset the circuit breaker. If the problem continues, call

an electrician.
Is control on? Make sure the refrigerator control is on. See

"Using the Control(s)."
New installation? Allow 24 hours following installation for the

refrigerator to cool completely.
NOTE: Adiusting the temperature control to coldest setting will

not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its
high-efficiency compressor and fans. The unit may run even longer
if the room is warm, a large food load is added, the door is opened
often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this
reduction, you may hear intermittent noises from your new
refrigerator that you did not notice from your old model. Below are
listed some normal sounds with explanations.

• Pulsating - fans/compressor adiusting to optimize performance.

• Hissing/Rattling - flow of refrigerant or from items placed on
top of the refrigerator.

• Popping - contraction/expansion of inside walls, especially
during initial cool-down.

• Water running/dripping - may be heard when water melts
during defrosting and runs into the drain pan.

The door will not close completely

• Door blocked open? Move food packages away from door.

• Bin or shelf in the way? Push bin or shelf back in the correct
position.

• Crisper cover in the way? Make sure the crisper cover is fully
pushed in, so that the back rests on the supports.

15