Kenmore Elite 30-Inch Radiant Slide-In Range
Stainless 22-41053
Black 22-41059
• 4.2 cu. ft. Flex Clean self-clean oven
• True convection with third 2,500W element
• Variable speed convection cooking
• True hidden bake element
• Three heavy-duty, porcelain-coated integrated handle racks
• One triple 12" / 9" / 6" @ 3,000 / 1,900 / 800W power radiant element
• One dual 12" / 9" @ 3,000 / 1,800W power radiant element
• Two 6" @ 1,200W radiant elements
• Warm & Serve™ zone
• Storage drawer with full extension drawer glides
• Easy Set™ 575 glass tap touch controls
• Glass door with x-large window (22-41053: stainless door)
• Two interior halogen lights
• Includes rear top filler kit
Model 22-41053 22-41059
Overall Stainless Black
Console Black Black
Door / Drawer Stainless Black
Handle Stainless Black
Surface Black Black
Flecks Grey Grey
22-41053/9
Page 1 of 2
SELECTION ELITE
Stainless 22-41053
Black 22-41059
OVEN FEATURES SELF-CLEAN
Oven Capacity (cu. ft.) 4.2
Variable Time Self-Cleaning Flex Clean 2–4 Hours
Electronic Oven Controls
Lockout
Food Category Convenience Pads •
Convection with Third Element True, Variable Speed
Auto Convection Conversion •
Temperature Recall •
Cook & Hold Warm Oven •
Delay Start Cook & Clean
Automatic Oven Shutoff •
Sabbath Mode* Certified
Hidden Bake Element True
Variable Broiling System Advanced, 400 – 550°
Total Adjustable Oven Racks
Integrated Handle Racks 3
Oven Light 2 Halogen (Auto & Manual)
Removable Glass Door
Window X-Large
Oven Interior W x H x D (in.) 24
COOKTOP FEATURES
Electronic Cooktop Controls
Cooktop Surface Ceramic Glass
12-in. / 9-in. / 6-in. Triple (Watts)
12-in. / 9-in. Dual (Watts)
6-in. (Watts) 2 @ 1,200 (24W ESEC)
Simmer Select™
Warm & Serve™ Zone
On / Hot Surface Indicator Lights 5-ESEC / 5-ESEC
GENERAL FEATURES
Oven Door Handle Material Metal
Drawer
Storage Drawer Handle Material Metal
Power Rating (kW) @ 240V / 208V 12.6 / 9.7
Bake / Broil @ 240V (Watts or BTU / Hr.) 2,500 / 4,000
Bake / Broil @ 208V (Watts) 1,875 / 3,000
Convection @ 240V (Watts) 2,500
Breaker / Copper Wire Size (240V)** 40 / 8
Item Weight (Approx. Lbs.) 229
Shipping Weight (Approx. Lbs.) 238
ACCESSORIES
Side Panel Kit – Black 22-628-903066-9010
Backguard – Black 22-628-903046-9010
Leveling Leg Extension Kit 22-628-903065-9010
Rear Top Filler Kit Included
Range Cord Required •
WARRANTY
1-Year Limited Warranty –
Entire Appliance Parts & Labor
2–5-Year Limited Warranty –
Glass Cooktop, Cooktop Elements Parts
If used for other than private family purposes, warranty applies for only 90 days.
*Sabbath Mode overrides auto oven shutoff
**Always consult local and national electrical codes
Glass Tap Touch
Easy Set™ 575, w/Blue LED
Oven Door,
Cooktop & Oven Control
3 Heavy-Duty,
Porcelain-Coated
Frameless
(41053: Stainless)
1
/8 x 16 1/2 x 18 1/32
Precision Set™
with Digital Display (ESEC)
1 @ 3,000 / 1,900 / 800
(16W ESEC)
1 @ 3,000 / 1,800
(36W ESEC)
ESEC
•
Storage w/Full Extension
Drawer Glides
03311
Due to Sears policy of continuous improve ment on its products, Sears
reserves the right to change materials and specifications without notice.
Before installing, consult installation instructions packed with product
for current dimensional and installation data.
22-4105X.PDF
Effective 04/04/11
28 5/16"
Side Panel
Door Open+
21
3
/4"
35 5/8" 36
3
/8"
30"
31
5
/16"
Min.
cutout
width
3
/4"
3
/4"
31
1
/2"
Formed or tiled
countertop
trimmed 3/4" back
at front corners of
countertop opening.
21
3
/4" min.**
22
1
/8" max.
CABINET
FRONT
1 1/8"
22
7
/8" min.
††
23 1/4" max.
COUNTERTOP PREPARATION
The cooktop sides of the range fit over the cutout edge of your countertop. Countertop must be level.
If you have a square finish (flat) countertop, no countertop preparation is required. Cooktop sides lay directly on edge of countertop.
Formed front-edged countertops must have molded edge shaved flat 3/4" from each front corner of opening.
Tile countertops may need trim cut back 3/4" from each front corner and/or rounded edge flattened.
If the existing cutout width is greater than 30 1/16", reduce the 3/4" dimension.
††For cutouts below 22 7/8", applaince will slightly show out of the cabinet.
**Note: Minimum cutout depth is increased to 24" with optional backguard.
Note: Rear Top Filler Kit ships with product
28 5/16"
Side Panel
Door Open+
21
3
/4"
35 5/8" -
36 3/8"
30"
31
5
/16"
21
3
/4" min.**
22
1
/8" max.
1 1/8"
22
7
/8" min.
††
23 1/4" max.
Shave Raised
Edge To Clear
31
1
/2" Wide
Cooktop.
1 1/2" Max.
13"
30" Min.
For existing 29" cutout width
opening, you must call the Sears Service
Center for optional thinner side panels.
Also you must prepare the countertop
edge as shown in “Counterdepth
Preparation”.
Locate Cabinet
Doors 1" Min. From
Cutout Opening
18" Min.
Approx. 1
7
/8"
30" Min.*
30"
†
±1/16"
35
5
/8" Min.
36
5
/8" Max.
24" Min.
21 3/4"
Min.**
22
1
/8"
Max.
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20.3 - 43.2 cm) From Right of Cabinet
and 2" to 4" From Floor
28 5/16"
Side Panel
Door Open+
21
3
/4"
35 5/8" -
36
3
/8"
30"
31
5
/16"
21
3
/4" min.**
22
1
/8" max.
1 1/8"
22
7
/8" min.
††
23 1/4" max.
Shave Raised
Edge To Clear
31
1
/2" Wide
Cooktop.
1 1/2" Max.
13"
30" Min.
For existing 29" cutout width
opening, you must call the Sears Service
Center for optional thinner side panels.
Also you must prepare the countertop
edge as shown in “Counterdepth
Preparation”.
Locate Cabinet
Doors 1" Min. From
Cutout Opening
18" Min.
Approx. 1
7
/8"
30" Min.*
30"
†
±1/16"
35
5
/8" Min.
36
5
/8" Max.
24" Min.
21 3/4"
Min.**
22
1
/8"
Max.
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20.3 - 43.2 cm) From Right of Cabinet
and 2" to 4" From Floor
Do not pinch the power supply cord or flexible gas conduit between the range and the wall.
Do not seal the range to the side cabinets.
*Note: 24" min. clearance between the cooktop and the bottom of the cabinets when the bottom
of the wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered
with not less than No. 28 MSG sheet metal, 0.015" stainless steel, 0.024" aluminum, or 0.020"
copper. 30" min. clearance when the cabinet is unprotected.
†Note: To avoid cooktop glass breakage for cutout with more than 30 1/16", make sure appliance
is centered in the counter opening while pushing it in. Raise leveling legs at maximum position,
insert the appliance in the counter and then level. Make sure the unit is supported by the leveling
legs and not by the cooktop glass itself.
+Allow at least 19 1/4" clearance for door depth when it is open.
22-41053/9
2
" Wide
Dual-Fuel:
10" Min.
From Wall
Both Sides
1 1/2" Max.
13" Min.
18" Min.
30" Min.*
30" Min.
30"
36" Std.
35
3
/8"
Min.
24" Min.
1 1/8"
22
7
/8" min.†
23 1/4" max.
21 3/4"
min.**
22 1/8"
max.
WALL
Page 2 of 2
22-49614,
22-49616
ACCESSORIES (OPTIONAL)
Call Sears Parts at 1-800-225-2864.
*Complies with 1/1/96 NEC code revision for new construction and remodeling
03311
RANGE CORD REQUIRED
Order Wire Length
22-49614 3 4 ft.
22-49616 3 6 ft.
22-49624* 4 4 ft.
22-49626* 4 6 ft.
Due to Sears policy of continuous improve ment on its products, Sears
reserves the right to change materials and specifications without notice.
Before installing, consult installation instructions packed with product
for current dimensional and installation data.
22-49624,
22-49626
SIDE PANEL KIT
Includes two full size (right and left) panels.
NOTE: Product is shipped with 4
width panels. Order this full size kit as needed.
22-628-903066-9010 – Black
1
/2" min.
All ranges are equipped with an Anti-Tip device. The installation of this
device is an important, required step in the installation of the range.
BACKGUARD
22-628-903046-9010 – Black
LEVELING LEG EXTENSION KIT
22-628-903065-9010
22-4105X.PDF
Effective 04/04/11