22-30503.PDF
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specifications without
notice. Consult installation instructions packed with the product for
final dimensional data. For complete warranty information, contact
your local Sears Contract Sales Account Manager.
Effective 03/19/07
Rev. 2
06007
22-30503
Selection
Stainless 22-30503
Cooktop Features
Burner Type Sealed
Triple Ring Burner BTU (Nat./LP) 16,000/10,000
Power Burner BTU (Nat./LP) 1@17,200/14,000
1@12,200/11,000
All-Purpose Burner BTU (Nat./LP) 2@9,500/8,000
Simmer Burner BTU (Nat./LP) 1@5,000/4,000
Simmer Burner Location RR
Grate Styling Continuous
Matte Finish
Grate Material Porcelain-Coated
Cast-Iron
Dishwasher Safe Grates •
Cast-Iron Griddle Included
Cooktop Surface Ceramic Glass
w/Stainless Trim
Valves (Degrees of Turn) 270
General Features
Optional 9-in. PRO-Style Backguard† 903048-9010
Electronic Ignition •
Convertible to LP* •
Shipping Weight (Approx. Lbs.) 93
Warranty
1-Year Limited Warranty –
Entire Appliance Parts & Labor
2-5 Year Limited Warranty –
Cooktop Elements Parts
If used for other than private family purposes, warranty applies for
only 90 days.
RR = Right Rear
*LP orifices included; conversion must be done by qualified
LP installer
†Call Sears parts at 1-866-732-7728
page 1 of 1
Kenmore PRO™36-Inch Sealed Gas Slide-In Cooktop
22-30503 – Stainless
• Ceramic glass surface with stainless steel frame
• One 16,000 BTU triple ring burner
• One 17,200 and one 12,200 BTU power burner
• Two 9,500 BTU all-purpose burners
• One 675 to 5,000 BTU simmer burner
• Porcelain-coated cast-iron, continuous grates with matte finish
• Gourmet Accessory Package with cast-iron griddle
• Dishwasher-safe grates
• Electronic ignition
• Convertible to LP (kit included)
• Optional 9" Pro-style backguard available through Sears Parts (903048-9010)
Model 22-30503
Overall Stainless
Controls Stainless
Look
Surface Stainless/
Black
Matte
Grates Black
slide-in cooktop
IMPORTANT: Do not slide unit into cabinet cutout. Protruding screws on
the bottom of unit may damage the bottom front finish.
*30" min. for unprotected cabinet, 24" min. for protected surface.
**Critical to the proper installation of the cooktop. Be sure to respect
these dimensions. The 35
15
/16" dimension reflects the finished size. It is
recommended to undercut this dimension and adjust upon installation of
the appliance due to the variation in countertop materials.
†Depth below cooktop.