Kenmore 25379822890, 25379802892, 25378847792, 25378842791, 25378842790 Owner’s Manual

Record Your Model and Serial Numbers .............. Cover

ore

Important Safety Instructions ....................................... 2

First Steps ........................................................................ 3

Energy Saving Ideas ....................................................... 4

Setting the Controls ....................................................... 4

Temperatures ............................................................. 4

Energy Saver Switch ................................................. 4

Moisture .................................................................... 4

Fresh Food Storage ........................................................ 5

Care and Cleaning ....................................................... 6-7

Automatic Ice Maker (some models) ............................ 7

Reversible Door instructions .................................... 8-!0

Avoid Service Checklist ........................................... I0-I I

Normal Operating Sounds ........................................... 11

Sears Service ................................................................. i2

Refrigerator Warran_j ................................................ 12.

Sears Service in Canada ............................................... !3

Warranty (Canada) ....................................................... 14

::.J_,_ _J Jt_,,JJ, , , , ,, , i,

Read and Save These instructions

This Owner's Guide contains general operating instructionsfor your refrigerator and features information for several models.
Your refrigerator may not have all the described features, Use your refrigerator only as instructed in this guide. These

instructions are not meant to cover every possible condition and situation that may occur Common senseand caution must

be practiced when installing, operating, and maintaining any appliance,

Record Your Model and Serial Numbers

Record the mode} and serial number in the space provided below, The serial plate is located on the top left wall of the

refrigerator compartment.
Model Number:

Serial Number:
Purchase Date:

PRINTEDIN

U SA

P/N 218827100B (9809)

Important Safety

Instructions

Proper Disposal of

Your RefrigeratorFreezer

Risk of child entrapment.

Child entrapment and suffocation are
not problems of the past Junked or

abandoned refrigerators or freezers are

still dangerous -- even if they wif! sit for

"just a few days, = ifyou are getting rid

of your old refrigerator or freezer, please

follow instructions below to help

prevent accidents.
BEFOREYOU THROW AWAY YOUR

OLD REFRIGERATOI_]FREEZER:

Read all instructions before using this refrigerator.

For Your Safety

Do not store or usegasoline or other flammable vapors and liquids in the vicinityof
this or anyother appliance_Readproduct labelsfor flammability and other warnings,

rt,,,v-,_:_tl_f_Child Safety

• Destroy carton, plastic bags, and any exterior wrapping material immediately
after the refrigerator isunpacked Children should never use these items for

play..Cartons covered with rugs, bedspreads, plastic sheetsor stretch wrap may
become airtight chambersand can quickly causesuffocation.

• Remove all staples from the carton° Staples can cause severe cuts and destroy

finishes if they come in contact with other appliances or furniture: .......

• An empty, discarded ice box, refrigerator or freezer is a very dangerous
attraction to children Remove the door of arly-ap_pliance that is not in use,

even if it is being discarded,

* Remove

doors.

* Leave

shelves in
place so

children
may not

easily
climb

inside°

[l_._i_l_ Avoid fire hazard or

electric shock. Do not use an extension
cord or anadapter plug. Do not remove

any prong from the power cord.

Groundinc

wall

_,,Jv-_!!_=l Electrical Information

These guidelines must be followed to ensure that safety mechanisms in

the design of this refrigerator will operate properly. ............

• The refrigerator must be plugged into its own 115 Volt, 60 Hz, AC only
electrical outlet, The power cord of the appliance is equipped with a three-
prong grounding plug for your protection against shock hazards° It must be
plugged directly into a properly grounded three-prong receptade_ The
receptacle must be installed in accordance with local codes and ordinances.

Consult a qualified electrician, DO.NOT_USE AN EXTENSION.CORD ORAN .....

ADAPTERPLUG. ..........

• If voltage varies by 10 percent or more, performance of your refrigerator may
be affected. Operating the refrigerator with insufficient power can damagethe
compressor, Such damage is not covered under your warranty. If you suspect

your voltage is high or tow, consult your power company for testing,.

° To prevent the refrigerator from being turned off accidentally, do not plug the

• Do not pinch, knot, or bend the power cord,

|

Other Precautions

• Never unplug the refrigerator byputling on the power cor& Always gdp the plug

firmly and pull straight out from the receptacle.

o To avoid electrical shock, unplug the refrigerator before cleaning and before

replacing a light bulb. Note= Turning the refrigerator control to OFFturns off

the compressor, but does not disconnect power to the light bulb or other

electrical components.

• Do not operate the refrigerator in the presence of explosive fumes.

° If your refrigerator hasan automatic icemaker, avoid contact with moving parts.

Power suppiy i

cord wittl 3-prong

grounding p}ug

Before starting the refrigerator, follow these important first steps:

3" AIR SPACE

CJearance

Proper air circulation and leveling willensure efficient operation,

Location

• Choose a place that is near a grounded electrical outlet DO NOT use an
extension cord or an adapter plug

• If possible, place the refrigerator out of direct sunlight and away from the
range, dishwasher or other heat sources,.

. The refrigerator must be installed on a floor that is level and strong enough

to suppor_ a fully loaded refrigerator°

• Consider water supply availability for models equipped with an automatic ice
maker,.

Installation

o Do not install the refrigerator where the temperature will drop below 60°F

(I 5°C)or riseabove 110°F (43°C) The compressor will not be able to maintain
proper temperatures.

* A!low space around the unit for good air circulation. Leave a I inch (25 mm)

space behind and a 3 inch (75 ram) space above the refrigerator for adequate
circulation

, In a recessed installation, allow an extra 112inch (10-I 5 ram) on each side

for easeof installation: .........................

, For best circulation, elevate the unit 1 inch (25 mm) from the floor, especially

if the floor is carpeted

Door Opening

The doors should open to allow easy accessto a counter when removing food,

,__Do not position the refrigerator so you have to walk aroundthe refrigerator

doors.

, Reversethe doors if necessary.See "Reversible Door instructions.._

P_ISE

LOWER

Screw-type Levelers (some models)

LOWER

CABINET

CABINET

Exposed bolt (some models)

CABINET

CABINET

Leveling

All four corners of refrigerator must rest firmly on a solid floor. Some models are

e_u!pped withadjustab_le screw:type !ev_e!ers.Others are equjp_p_edwit_h_ro!lers.- tf
your refrigerator did not come with rollers, theycan be purchasedfrom your dealer,

, To adjust screw-type levelers {some models): Tip cabinet back slightly and

raiseadjusting bolts as needed.

= To adjust front rollers {some models); Use a screwdriver, 3/8" socket

wrench, or nutdriver to adjust rollers as shown.

RAISE THE FRONT of cabinet enough so doors will close freely when opened
halfway. Levelcabinet side to side,

Cleaning

• Wash the inside, all removable parts and the outside with mild detergent and
warm water. Wipe dry DO NOT USE HARSH CLEANERS ON THESE

SURFACES.

• Do not use razor blades or other sharp instruments which can scratch the
appliance surface, when removing adhesive labels. Any glue left from the

tape or energy label can be removed with a mixture of warm water and mild
detergent, or touch the residue with the sticky side of tape already removed.

, DO NOT REMOVETHE SERIALPLATE

LOWER

Sunkenbolt (somemodels)

_J

Energy Saving Ideas

Setting the Controls

= Locate the refrigerator inthe coolest part of the room, out of direct sunlight and

away from heating ducts or registers. Do not place the refrigerator next to heat-
producing appliances such as a range, oven or dishwasher.. If this is not possible,
asection of cabinetry or an added layer of insulation between the two appliances
will help the refrigerator operate more efficiently.

• Level the refrigerator so the doors close tightly.

• Refer to this Owner's Guide for the suggested refrigerator settings.

• Periodic cleaning of the condenser will help the refrigerator run more efficiently°
See Outside in the "Care and Cleaning" section.

• Do not overcrowd the refrigerator or block cold air vents,. Doing so causes the
refrigerator to run longer and usemore energy, Shelvesshould not be lined with
aluminum foil, wax paper or paper toweling.Liners interfere with cold air
circulation, making the refrigerator less efficient, which could cause food
spoilage°

° Cover foods and wipe containers dry before placing them in the refrigerator, This

cuts down on moisture build-up inside the unit°

• Organize the refrigerator to reduce door openings. Remove as many items as
needed at one time and close the door as soon as possible.

11 T ,

Cool Down Period

Toensure safe food storage, allow the refrigerator to operate with the doors closed
for at least 8 to 12 hours before loading with food.

RefricperatorControl

Freezer

Refrigerator and Freezer Controls
o To start out, set control dials to the midpoint for a trial period of 24 hours,

Temperatures

• After 24 hours, adjust the controls as needed. Adjust temperatures one
number at a time, For colder temperatures, turn the dial toward COLDEST

Forwarmer temperatures, turn the dial toward COLD The temperature will
increaseor decrease, but not necessarily by t, 2, or 3 degrees

An adjustment made to one compartment may require an adjustment to the other,

o Turning the refrigerator control will change the temperature in BOTH

compartments, if the refrigerator control is turned to OFF, cooling

stops in both compartments.

• Turning the freezer control will change only the temperature inthe freezer

compartment°

To maintain temperatures, a fan circulates air in the refrigerator and freezer
compartments. For good circuiation, do not block cold air vents with food items.

Energy Saver Switch (somemodels)

Ifyour refrigerator is equipped with an EnergySaver Switch, keep it set on ENERGY

SAVERfor lowest energy usage.

Moisture

During humidweather, or if moisture appears on the cabinet between the doors,

set switch to REDUCEEXTERIORMOISTURE A heater will warm the surface and
allow moisture to evaporate_

EnergySaver

/'

/

I '

Fresh Food Storage

Shelf Adjustment

Refrigerator shelves are easily adjustable to suit individual needs° Some models have
sliding shelves, others have cantilever shelves, Before adjusting shelves, remove all

food.. The shipping clipswhich stabilizethe shelvesfor shipping may be removed and

discarded.

Toadjust sliding shelves,remove by pulling forward to the stop position, then lift the
front edge up and pull out. Replaceon any pair of rails by reversing this procedure_

Toadjust cantilever shelves(shelvessupported at the rear of the refrigerator), lift the
back of the shelf upand out. Replaceshelf byinserting hooks at rear into slots, Lower
and lock into position.

Sliding Shelf

cantilever Shelf

Toadjust combination cantile_r/51iding shelves,remove shelf by lifting hook out of
rear slot, and sliding shelf forward to the stop position. Lift up front edge and pull

out° Replaceshelf by sliding shelf back on supports, and inserting the hook into the
respective middle slot.

Door Storage

Door racksallow convenient storage of jars,bottles, and cans. Items used often are
available for quick selection. Somemodels have door rackswhich can accommodate
gallon-size plastic drink containers and economysize jars and containers which are
available today. Some racksare removable and adjustable for maximum efficiency.

The door bins can be moved to suit individual needs Remove bins by lifting straight

up, Place bins in the desired position and lower over the supports°

The Dairy compartment is wLarmerthan the general food storage section and is
intended for short term storage of cheese, spreads; or butter_ .

Crispers

The Crispers, located under the bottom refrigerator shelf, are designed for storing
fruits, vegetables, and other fresh produce. Wash items in clear water and remove

excesswater before placing inthe Crispers.Itemswith strong odors or high moisture

should be wrapped before storing.......................

Meat Pan (some models)
Some models am equipped with a Meat Pan that can be positioned below any
refrigerator shelf. Use this pan for short term storage of bulk meat items..If meats
are to be kept !onger than 1 or 2 days, they should be frozen.

SombinatiDn

! 'Ill ' I III1'1

Care and Cleaning

metal surfaces, Do not touch refriger-

_ Damp objects stick to cold

ated surfaces with wet or damp hands,

Keep your refrigerator and freezer clean to prevent odor build-up Wipe up anyspills
immediately and clean both sections at least twice a year, Never use metallic
scouring pads, brushes,abrasive cleanersor strong alkaline solutions on any surface
Do not wash any removable parts in a dishwasher.

Always unplug the power cord from the wall outlet before cleaning. Turning
the control to OFFdoes not disconnect power to the controls, light bulb, or other

electrica! components.

Inside

Wash insidesurfaces of the refrigerator and freezer with a solution of 2 tablespoons

baking soda in I quart warm water, Rinse and dry thoroughly, Be sure to wring

excess water out of sponge or cloth before cleaning around the controls,
light bulb, or any electrical parts.

Wash removable parts suchas shelvesanddrawers with baking soda solution or mild

detergent and warm water. DO NOT"USE HARSH CLEANERS ON THESE SUR-
FACES,Rinseand dry thoroughly_ Clean the door gaskets with mild suds, rinsewith

clearwater and wipe dry Do not userazor blades or other sharp instruments which
canscratch the appliance surfacewhen removing adhesive labels. Any glue leftfrom
the tape or energy label can be removed with a mixture of warm water and mild

detergent;oi-;tooth the _esiddewith the sticky side of tape already removed. DO

NOT REMOVE THE SERIAL PLATE,

To avoid damage and help
the refrigerator run as efficiently as
possible; clean the condenser
periodically,,

DEFROST

WATER

PAN

Outside

Wash the cabinet and handleswith warm water and mild liquid detergent. Rinsewell
and wipe dry with a cleansoft cloth,

When moving the refrigerator, pull straight out. Do not shift the refrigerator from
side to side as this may tear or gouge the floor covering,If the refrigerator hasan

automatic ice maker, be careful not to move the refrigerator beyond plumbing
connections.

Periodically clean the condenser (black tubes and wires on the back of the
reffi_rator)_ usinga vacuum wi_h i_f.sdusti_O-t66[ &ttach-meri__'bc:utJm th_ _oils to

remove dust build-up Do not allow lint or dust to accumulate on the coils,

The defrost water pan is located at the bottom rear of the refrigerator on top of the
compressor (shown left). The pan should be cleaned periodically,. Wipe dean with

a damp cloth,

Replacing the Light Bulb

To replace the light bulb:

1, Unplug the refrigerator:

2. Wear gloves as protection against possible broken glass.

3. Replace old bulb with an appliance bulb of the same wattage,.
4,. Remember to plug the refrigerator back in.

Care and Cleaning

(continued)

.... I1' I

Automatic Ice Maker

Vacation and Moving Tips

Short vacations: Leavethe refrigerator operating during vacations of I to 3 weeks_

Use up all perishable itemsfrom the refrigerator section, Wrap and store other
itemsin the freezer° Ifthe unit has an automatic ice maker,turn off the icemaker,

Long vacations: Remove all food and iceif you will be gone I month or more,Turn

the control to OFFand disconnect the power_ If the unit has an automatic ice
maker, turn off the ice maker and turn the water supply valve to the dosed

position, Defrost and clean the interiorthoroughly, Leaveboth doors open to
prevent odor and mold buildup. Block open if necessary.

Moving: When moving the refrigerator, follow these guidelines to prevent

damage:

. Removeall food and other items from both the refrigerator and freezer

compartments_ Empty the ice storage bin, Defrost and clean the

interiorthoroughly_,

• If a hand truck is used in moving, load the refrigerator from the side,,
° Turn front rollers asfar up aspossible (some models). This will protect them

during sliding or moving°

° The cabinet should be well padded and handled with care DO NOT

DROP.

If your refrigerator has an automatic ice maker, it will provide a continuous supply
of ice for normal use, The automatic ice maker isan optional accessory which may

be installed in most models at any time, Call your local dealer for installation,

After the plumbing connections have been completed, the water supply valve must

be opened. Placethe ice container under the ice maker, pushing it asfar back as
possible. Lower the wire signal arm to its "down" or ON position, Because of new
plumbing connections, the first production of ice cubes may be discolored or have

anodd flavor, Throw the iceaway until the cubesmade arefree of discoloration and

taste, Rememberthat water quality determines your icequality, It is best to connect
the ice maker to water that is not softened, Chemicals from a malfunctioning

softener can damage the. ice maker,, tf the ice maker is connected to soft water,
ensure the softener is maintained and working properly.

To stop the ice maker, tift the wire signal arm until it dicks and locks in the "up"
or OFFposition, The ice maker turns off automatically when timeicecontainer isfull.

If your model has an adjustabIe freezer shelf, place the shelf so the wire signal arm

will hit the icewhen the icecontainer isfull,

Ice Maker Tips

1, Icestored too long may develop an odd flavor, Empty the container and be sure

the wire signal arm is in its "down" or ON position, The ice maker wilt then
produce more ice,

2. Occasionallyshake the container to keep ice separated.,

3. Keepthe wire signal arm in its "up" or OFFposition until the refrigerator
is connected to the water supply or whenever water supply isturned off,

4- Certain sounds are normal when the ice maker is operating. They are:

Motor operation

Ice being loosened from the tray
Ice being dropped into the container

Running water
Water valve opening and closing

For more information on these operations, see "Normal Operating Sounds,'

5, Wash ice container in warm water with mild detergent, Rinsewell and dry,
& Stop the ice maker when cleaning the freezer or for short vacations,,

7. lfthe ice maker will be turned off for a long period of time, turn the water supply

valve to the closed position,

Reversible Door
instructions

Your refrigerator isequipped with convertible door hinges., Hinging of the door can be
changed to the opposite side any time you wish, An envelope containing extra plastic

hole plugs isinduded in some models, Turn the refrigerator control to OFF, Removeall

food, bottles, and other items from the door. Begin with freezer door, Completely

remove one door before beginning the other,

Tools Necessary:

screwdriver

Socket

Wrench Set

1, Snap off hinge cover attop/"................of cabinet 2. Open the freezer " doorenough to allow

(some models). With the freezer door it to be iifted off the center hinge.
dosed, remove the two screws attaching
upper hinge to cabinet, Lift the hinge up
and off, Be sure to save screws, hinge,

an d.s_h!m,for reassembly later,_- ,_

N-0T-E: Some models t_ave- pocket"

handles, which are recessed into the

side of the door, On these models,

HlngB Pin

only the hinges wil! need to be re-

versed, A handle is built into both
sides of each doon

OR _ Adjustable

Wrench

3. With the refrigerator door dosed, remove

center hinge pin° (Note the arrangement of
the upper andlower washers (somemodels)

on the hinge pin, The washers must be
assembledlater in the same manner,)Open
refrigerator door enough to allow door to be
lifted off theIoWeThin'g_, Remo_vt_the two

screws attaching the center hinge, Thethird

outermost screw under the center hinge

shouldbeleftinplace. Save hinge,pin, and
washers (some models) for reassembly

later, Reinstallscrews in original holes_

OF

Washer

_O Hiinge

Hinge

4. Remove hinge pin, hinge, and the two 5. Carefully remove the hole plugs from
bolts attaching the lower hinge, Save the the hinge holes in the center mullion and
hinge, hinge pin, washer (some top of cabinet and reinstal! in the opposite

models) and bolts for reassembly later, set of holes

o

FreezerDoor

RefrigeratorDoor

6_ After the handles are removed (see
steps 7 and 8), remove door stop from

bottom of freezer and refrigerator door
and reinstall on opposite side,

Reversible Door
Instructions (continued)

=Feezer Door LockH_ndleor=

7. (When needed,, please refer to your

literature pack,) Reversehandles while doors

are off, Remove the two screws attaching the

handle to the bottom of the freezerdoor, Swing
bottom of handle away from the door and slide

handleup and off dovetail button° Removescrew

and dovetail button and install on other side,

moving hole plug from correspondinghole to the

opposite side, Reverse instructions for
reattaching handle. Startwith handle offset away
from the door. Placetop of handleover dovetail

button, swing handle into an upright position
and push upward, locking it into place, Secure

bottom of handle with screws,

Hinge Pin

DovetalJ Button

Refrigerator Door

$¢rews

Lock Handle Ov_t

OoveL_11Bu_on

8.(When needed, please refer

to your literature pack.) To
remove handle: PuUdown to

slidetrim off bottom of handle
Remove the two screws

attaching the handle to the top
of the refrigerator door. Swing
thetop of handle awayfrom the

door and slide handle down and
off dovetail button Remove

screw and dovetail button and
installonother side,movinghole
plugsfrom corresponding holes

to the opposite side. Reverse
instructions for reattaching

handle, Start with the handle
offset away from the door, Place

bottom of handle over dovetail
button, swing handle into an

upright position and push
downward, locking it into place,

Trim Lock A_/h_Ev_

TrimLec_

Secure top of handle with
screws, Replacetrim

Trim Removal (Full-Length Trim models only):

In some models, the refrigerator door has a full length trim piece which
continuesfrom the bottom of the handle to the bottom of the door Thetop of

the trim fits around the baseof the handle An adhesive "trim lock"ispositioned

about half-way down. The bottom of the trim isheld in place by either an

adhesivetrim took,or a trim lock with two prongs inserted into a hole on the
face of the door. Removethe trim by gently pulling the trim lock areasout and
away from the door. When the trim isfree from the door, gently pull the trim

down and awayfrom the baseof the handle, usinga slight side to side motion
To reattach trim: Slideboth trim locksout of trim. Insertthe new adhesivetrim

lockscontained in your literature pack, NOTE: Trim lock must be removed and
installed bysliding OVERthe two donut shaped areas,install trim to handle by
sliding over baseof handle Carefully align trim and press down at trim lock

]ocations.Replacehole plug on opposite side Use rubbing alcohol to remove
any adhesive residue from old trim lock location(s).

LowLrHinge

or

Hlnge
Pin

9. Using a putty knife, remove black plastic plug
(not shown) from front of baseand reinstallin the

oppositeset of lower hinge holes.Assemblelower
hinge to cabinet Install hinge pin in opposite

hinge hole from which it was removed install the

washer (somemodels)on the lowerhinge pin and

insert hinge bolts, but do not tighten Hingeswill
haveto remainloose againstcabinet to align door.

Washer

Bolts Lower Hinge

Piug

Center Hinge
(ups{de down)

10,Turn center hinge upside down andsecureto

cabinet asshown, using the screwswhich are in
the new holes, lnstaiI refrigerator door on lower
hinge pin, Align door with edge of cabinet Hold

the door on front of cabinet

Reversible Door
Instructions (continued)

Hinge Pin

Center Hing_

,Screws

11. Place original washer (some models)

over hole in refrigerator door and lineup

hole in center hinge, insert hinge pin

12. Remove ptug from upper bearing
of door and reinstall on opposite side

!3, Assembte upper hinge to top of cabinet
and door Useopposite set of holes Do not

completely tighten screws.

through both holes_Placewasher (some

models) on hinge pin, then position

freezer door on center hinge.

Align doorssothere isaparallel gapbetween

doors, Adjust doors to cabinet so gaskets

seal but do not bind. Tighten upper and

lower hinge screws

Additional adjustment may be necessary
after loading the door shelves, Returnfood,

bottles, and other articles to doors..Turn

the refrigerator contro! on and to the

previous setting.-

Avoid Service Checklist Before calling for service, review this I}st. It may save you both time and expense,

This list includes common occurrences that are not the result of defective
workmanship or materials in this appliance.

OCCURRENCE

RUNNING OF REFRIGERATOR

Refrigerator compressor does not

run.

SOLUTION

Refrigeratorcontrol isset to OFF,Turn on refrigeratorcontrol, SeeSetting the Con_'ols.
Plugat wall outlet is disconnected Besureplug istightly pushed into outlet.
Housefuse hasblown or circuit breaker hastripped Check and/or replacefuse with a 15amp

time-delayfuse, Resetcircuit breaker
Poweroutage. Check houselights Call localelectriccompany

Refrigerator runs too muchor too
long,

TEMPERATURES ARE TOO COLD OR TOO WARM

Refrigeratorislargerthanthe previousoneyouowned Thisisnormal Larger,more efficientunits
requirelonger running time

Room or outside weather is hot tt is normal for the refrigerator to work longer under these

conditions

Automatic ice maker is operating (some models) Operation of the ice maker causes the

refrigerator to run slightly more,

Doors are opened too frequently or too long Warm air entering the refrigerator causes it to run
more, Open the doors less often

Refrigerator or freezer door may be slightly open_ Make sure refrigerator is level. Keep food and

containers from blocking door.,

Temperatures ineither compartment are too cold or too warm See Setting the Con_'o|s.

10

OCCURRENCE SOLUTION

AUTOMATIC ICEMAKER (some models)

Ice maker is not making any ice, Ice maker wire signal arm is in "up" or OFF position Move wire signal arm to "down" or ON

position.

Householdwater linevalveisnot open, Turnon householdwater linevalve,,

Watersupplyvalvein refrigeratorisbeingbtockedbyforeign material Unplugthe refrigeratorand
turn off water suppiy.Sliderefrigeratorout and locatewhere water isconnected to the valve,

Unscrewthe brassfitting andpull out the screenfrom insidethe valvemesh Cleanthescreenof
foreign material. Replacescreenandbrassfitting andturn the water supplyon; checkfor leaks,

Plugin refrigerator and slide into place,

WATER/MOISTURE/FROSTIN51DEREFRIGERATOR

Moisture collects on inside of Weather is hot and humid which increases rate of frost buildup and internal sweating, This is

refrigerator walls, normal, Be sure doors are sealed tightly Open doors less often.

Water cotlects under drawer cover or Vegetables contain and give off moisture Washedvegetablesandfru]tsdrainwhileintt_ed_:awer,

in bottom of drawer. This is normal Pat rinsed vegetables dry with a towel before storing, Clean and dry crispers as

necessary,

WATER/MOISTURE/FROST_ REFRIGERATOR

Moisture forms on outside of Door isslightly open, causing cold air from inside the refrigerator to meet warm air from outside,
refrigerator or between doors.

This fs normal in humid weather When humidity is lower, the moisture should disappear, Setthe
Energy Saverto the Reduce Exterior Moisture position,

ODORS IN REFRIGERATOR/FREEZER......................

Interior needs to be cleaned Clean interior with a sponge, warm water, and baking soda,
Foodwith strong odor is in refrigerator/freezer. Cover food tightly°

ice has picked up odor or flavor from strong food stored in refrigerator or freezer Cover foods

tightly Discard stale ice,

UGHT BULB IS NOT ON

-Light bulb is burned out. See-;_Replacingthe Light Butb" in Care and Cleaning.,

Lightswitch isstuck,Lightswitch is locatedon theceilingof the refrigeratorcompartment near
the temperature control box. Pushin light switchto release.

No electdc current is reaching refrigerator, See nUNNtaeo_nEFmGE_ORabove

Normal Operating

Sounds rAUTOMATIOiceM, eR•

| Occasionally yea will haas ice
Lcubes dropping _nts the ice bin

YOU may hear air being toted

EVAPORATOR FAN I

through the cshlnet by the lan

EVAPORATOR I

flow of refdgeranf throuoh the!

may create a bol'ithg I

sound. J

DEFROST HEATER
Dur_g defrost cycles water dd#p_ng

onto thB heater may cause e hissing
or sizzling sound. After dekostJr_g, a

poppin_ sound may occur.

WATER VALVE •
When the _ce maker fills w_

water, yet_ will i_ar a bez:zbg

sound and water nJnnlng,

mllllll 'Ul

Sears Service

_We ServiceWhat We Sell" isour assurance you can depend on Sears for service

....and Sears service is nationwide. Your refrigerator has added value when you

consider that Sears has service units nationwide, staffed with professional
technicians specifically trained on Sears appliances and having parts, tools and

equipment to insurethat we meet our pledge to you... "We Service What We Sell."

Sears Maintenance Agreement

Maintain the value of your Kenmore® refrigerator with a Sears Maintenance
Agreement° Searsrefrigerators are designed, manufactured, and tested for years

of dependable operation. Yet, any modern appliance may require service from
time to time.

The Sears Maintenance Agreement
o is your way to buy tomorrow's service at today's price°

• Eliminates repair bills resulting from normal use.

• Allows for as many service calls as required°
, Provides for service by professional Sears-trained technicians.

• Offers an annual preventive maintenance check-up at your request.

This maintenance agreement does not cover ori_ginalinstallation, reinstallation,
or damage resulting from external causessuch asacts of God, abuse, theft, fire,

flood, wind, lightning, freezing, power failure, power reduction, etc., Pleaseask
a salesperson to see the agreement for all of the terms and conditions..

Refrigerato r Warranty

Full One-Year Warranty on Refrigerator

For one year from date of purchase;-when this refrigerator is operated and

maintained according to the instructions provided in this Owner's Guide, Sears
will repair this refrigerator, free of charge, if defective in material or
workmanship.

Full Five-Year Warranty on Sealed Refrigeration System

Forfive yearsfrom the date of purchase, when this refrigerator is operated and

maintained according to the instructions provided in this Owner's Guide, Sears

will repair the sealed system (consisting of refrigerant, connecting tubing, and

compressor motor), free of charge, if defective in material or workmanship.

The above warranty coverage applies only to refrigerators which are used for

storage of food for private household purposes. Excludes original and

replacement Kenrnore Ice& Water filter cartridges (if equipped with the filter

system). Original and replacement cartridges are warranted for 30 days (parts

only).

Warranty serviceisavailable bycontacting the NEARESTSEARSSERVICECENTER/

DEPARTMENTin the United States. Seethe back page of this manual

This warranty gives you specific legal rights, and you may have other rights

which vary from state to state.

Sears, Roebuck and Co.

3333 Beverly Road

Hoffman Estates, IL 60179

12

Sears Service in Canada

Dear Customer:

tn manufacturing this product, many steps have been taken to provide you with
the highest quality_ Unfortunately, errors or omissions occasionaly occur_ In the

event you find a missing or defective part, pleasecontact your nearest Searsstore.
If you haveanysuggestions that would help usto improve our assembly/operation

instructions or this prouct, please write them down, including the information
listed below and mail to:

Sears Canada, Inc. Attn: Buyer Dept. 646

222 Jarvis Street
Toronto, Ontario

MSB 2B8

Purchased by:
NAME:

ADDRESS:
CITY:
POSTALCODE:.
MODEL No.:.

DATEOFPURCHASE_.J__j LOCATIONOF PURCHASE:

PROV,:

PHONE:

SERIALNo:

COMMENTS:

13