
E L I T E
®
Refrigerator
Top Mount
Use & Care Guide
Refrigerador
Congelador Superior
Guia para su uso y cuidado
R_frig_rateur
Compartiments Superposes
Guide d'utilisation et d'entretien
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8
"1"1
Z ¸
m
www.sea rs.com
241858200 (0706)

Welcome &
Important Safety
Congratulations
Congratulations on your purchase of a new refrigerator!
We are very proud of our product and we are completely
committed to providing you with the best service possible.
Your satisfaction is our #1 priority.
We know you'll enjoy your new refrigerator and ThankYou
for choosing our product. We hope you consider us for
future purchases.
PLEASE READ AND SAVE THESE
iNSTRUCTiONS
This Owner's Guide provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not
meant to cover every possible condition and situation that
may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
Please record your model and serial numbers below
for future reference. This information is found on the
serial plate located inside the refrigerator
compartment.
NOTE: Use 253
only soap and 970
water to clean
serial plate.
Model Number:
or:
S , TABLE OF CONTENTS
era Number:
Purg f#oDr te!............................................2
Safety Instructions .............................. 2-3
Warranty .............................................. 3
Protection Agreements ........................ 4
Installation--Includes Connecting Optional Ice
Maker To Water Supply ..................................... 5-6
Door Removal ..................................... 7
Door Handle Installation ...................... 8
Features At A Glance ......................... 9
Temperature Controls .......................... 10
Looking Inside ..................................... 11-13
Water Dispenser & Ice Service ........... 14-16
Food Storage & Energy Saving Tips ... 17
Normal Operating Sounds & Sights .... 18
Care & Cleaning .................................. 19-20
Before You Call .................................... 21
Instructions
Please Read All instructions Before
Using This Refrigerator.
FOR YOUR SAFETY
• Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
• Do not operate the refrigerator in the presence of
explosive fumes.
• Avoid contact with any moving parts of automatic ice
maker.
• Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the
refrigerator is unpacked. Children should NEVER use
these items to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap may become
airtight chambers, and can quickly cause suffocation.
PROPER DISPOSAL OF YOUR REFRIGERATOR
OR FREEZER
Risk of child entrapment
Child entrapment and
suffocation are not problems of
the past. Junked or abandoned
refrigerators or freezers are still
dangerous - even if they will sit
for"just a few days." If you are
getting rid of your old
refrigerator or freezer, please
follow the instructions below to
help prevent accidents.
Before you throw away your old refrigerator/freezer:
• Remove doors.
• Leave shelves in place so children may not easily climb
inside.
Have refrigerant removed by a qualified service
technician.

lmporta.ntsa ety
Warranty information
KENIVIORE ELITE APPLIANCE WARRANTY
One Year Limited Warranty
These Guidelines Must Be FollowedTo EnsureThat When installed, operated and maintained according to all
Safety Mechanisms In This Refrigerator will instructions supplied with the product, if this appliance fails due
Operate Properly. to a defect in material or workmanship within one year from the
date of purchase, call 1-800-4-MY-HOME ®to arrange for free
ELECTRICAL iNFORMATiON
* The refrigerator must be pJugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
intoa properly grounded three-prong receptacle. The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
* immediately repair or replace any power cord that
becomes frayed or damaged.
* Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
* Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
* Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
* Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
* Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
IMPORTANT: Turning the refrigerator temperature
control to 0 turns off the compressor and prevents
you r refrigerator from cooling, but does not disconnect
the power to the light bulbs and other e!ectrica!
components.To turn off power to your refrigerator you
must unplug the power cord from the wa Ioutlet,
I or bypass the |
grounding prong....)
y Donot,u.der
repair.
LIMITED FiVE YEAR WARRANTY ON SEALED
REFRiGERATiON SYSTEM
For five years from the date of purchase, when this appliance
is installed,operated, and maintained according to the
instructions supplied with it, Sears will repair the sealed system
(consisting of refrigerant, connecting tubing, and compressor),
free of charge, if defective in material or workmanship.
If this appliance is used for other than private family purposes,
this warranty applies for only 90 days from the date of purchase.
This warranty covers only defects in material and workman-
ship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use,
including but not limited to filters, belts, light bulbs and bags.
2. A service technician to instruct the user in correct product
installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions supplied
with the product.
5. Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of
detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited
warranty shall be product repair as provided
herein. Implied warranties, including warranties of
merchantability or fitness for a particular purpose, are limited to
one year or the shortest period allowed by law. Sears shall not
be liable for incidental or consequential damages. Some states
and provinces do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on the
duration of implied warranties of merchantability or fitness, so
these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the
United States and Canada.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL
60179
Sears Canada Inc.,Toronto, Ontario, Canada M5B 2B8

Master Protection Agreements
Congratulations on making a smart purchase. Your new
Kenmore®product is designed and manufactured for
years of dependable operation. But like all products, it
may require preventive maintenance or repair from time
to time. That's when having a Master Protection
Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the
life of your new product. Here's what the Agreement*
includes:
Parts and labor needed to help keep products
operating properly under normal use, not just
defects. Our coverage goes well beyond the
product warranty. No deductibles, no functional
failure excluded from coverage - real protection.
Expert service by a force of more than 10,000
authorized Sears service technicians, which
means someone you can trust will be working on
your product.
Unlimited service calls and nationwide service,
as often as you want us, whenever you want us.
"No-lemon" guarantee - replacement of your
covered product if four or more product failures occur
within twelve months.
Product replacement if your covered product can't
be fixed.
Annual Preventive Maintenance Check at your
request - no extra charge.
F_ Fast help by phone - we call it Rapid Resolution -
phone support from a Sears representative on all
products. Think of us as a "talking owner's manual".
F_ Power surge protection against electrical damage
due to power fluctuations.
$250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.
Rental reimbursement if repair of your covered
product takes longer than promised.
10% discount off the regular price of any non-
covered repair service and related installed parts.
Once you purchase the Agreement, a simple phone call
is all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices
and additional information in the U.S.A. call 1-800-
827-6655.
* Coverage in Canada varies on some items. For full
details call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call 1-800-4-MY-
HOME ®.

This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that islevel
and strong enough to support afully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker.
iNSTALLATION
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
To Level Your Refrigerator:
1. Remove toe grille.
2. Use fiat-blade screwdriver or 3/8" socket wrench to adjust
front rollers.
Installation Clearances
,, Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
Raise

ltTstBliBtiot7 - Connecting Ice Maker To Water Supply
To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
, Copper tubing is recom mended for the water supply line.Water supply tubing made of 1/_,,plastic is not
recommended since it greatly increases the potential for water leaks. Manufacturer will not be respo nsible
for any damage if plastic tubing is used for supply line.
- DO NOT install water supplytubing in areas where temperatures fall below freezing.
- Chemicals from a malfunctioning softener can damage the ice maker, ifthe ice maker is connected to soft
water, ensure that the softener is maintained and working properly.
iMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.
Before Installing The Water Supply Line, You Will Need
• BasicTools: adjustable wrench, fiat-blade screwdriver, and Phillips TM screwdriver
• Access to a household cold water line with water pressure between 30 and 100 psi.
• A water supply line made of 1Ainch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inletvalve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
• A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
• A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: A water line kit is available from your appliance dealer at additional Cost. Itcontains 25 feet (7:6 meters) of 1A
inch 0D Copper tubing, a saddle type shutoff valve (nonPiercing), (2) IA inch brass compression nuts, (2)ferrules/
sleeves, and instructions for installing a water supply line.
ToConnect Water Supply Line To lce Maker lnlet Valve Plastic water
Tubing to Ice Maker
1. Disconnect refrigerator from electric power source, c=amp
2. Place end of water supply line intosink or bucket. Turn ON water supply and B,es,
Compression
flush supply line until water is clear. Turn OFF water supply at shut off valve.
3. Remove plastic cap from water valve inletand discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as (s=_eve)
shown.
5. Push water supply lineinto water valve inletas far as itwill go (1Ainch). Slide waterline
ferrule (sleeve) intovalve inletand finger tighten compression nut onto valve.
Tighten another half turn with a wrench; DO NOT over tighten. WaterValve
6. With steel clamp and screw, secure water supply line to rear panel of refrigerator ,t
as shown.
7. Coil excess water supply line (about 2Yzturns) behind refrigerator as shown
1
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that leak.
9. Reconnect refrigerator to electrical power source, fr°mh°useheldwatersuPplY
10. TOturn ice maker on, lower wire signal arm (see ice maker front cover for
(Include enough tubing in loop to allow
ON/OFF position of arm). movingrefrigeratoroutforcleaning,)
IMPORTANT: Ittakes approximately 24 hoursfor the icemaker to begin produping ice,Airin new plumbing linesmay cause ice
maker to cycletwo orthree times beforemaking aful!trayof ice.Newplumbing may cause iceto bediscoloredor have par flavor.
Discard icemade during thefirst24 hours, AfterconnePtingthe watersupply, refertO"HowtoPrime the WaterSupplySystem"for
imp°rtant informati°n about priming an empty water supply system"
Your refr gerator's water supp y system no udes severa tub ng nes, a water fi ter, a water valve and a water tank.To
ensure that yourwater dispenser works pro_rly, this system must be €omplete!yfilled with waterwhen your refrigerator
isfirst connected to the household water supply line.

Top Hinge
Cover
Door Removal instructions
Tools Necessary:
3/8"
Fixed
wrencr
3nc]
-lat Head
Screw Driver
DOOR REMOVAL INSTRUCTIONS:
If your refrigerator will not fit through an entrance area. you can reduce its size by
removing the doors. Check first by measunng the entrance.
IMPORTANT: Before you begin turn the refrigerator temperature control to"0" and
remove the electrical power cord from the walloutlet. Remove food from door shelves.
Sockel
Wrench Sel
Top Hinge
Eye Brow
J_J'._ _=____-__._._-_ Bottom
/Pin
Center
Hinge
1. Disconnect electrical supply.
2. Remove toe grille (see figure on page 5).
To remove freezer door:
1. Remove top hinge cover, eye brow and screws.
2. Trace around the hinge with a soft lead pencil. This makes reinstallation easier.
3. Remove top hinge and lift door off bottom hinge pin.
4. Reinstall doorin opposite orderand mannerof removal.
Toremove refrigerator door:
1. Place wood block under door to support itsweight.
2. Unfasten the multi-wire cable bracket by removing its screw from the cabinet.
3. Detach the multi-wire cable connector locatedbelow the door.
Place your thumbs on flat sides of each connector, grasp firmly, and pull apart.
4. Detach the water tube from the connector locatedbelow the door. The connector
releases when you press its outer sleeve inward.
NOTE: If refrigerator has been used, have a container ready to catch excess water
from tube.
5. Remove the bottom hinge screws and hinge, holding the door as its weight rests
on the wood block. Lay the door on its side to avoid damage to cable and tube.
6. Remove the center hinge screws and hinge. Ensure plastic washer stays on
hinge pin.
7. Reinstall door in opposite order and manner of removal. When both doors are
reinstalled, connect water line by inserting tube and pushing until mark touches
face of fitting. Connect cable, replace toe grille, and plug in electrical power cord.
ToD,sCON"EcT
1. Press outer ring against face
i
_ 2. Pullto
remove tube
Insert tube and
pUSh Until mark touches face Offitting