Congratulations on your purchase of a new refrigerator! We
here at Sears are very proud of our product and we are
completely committed to providing you with the best
service possible. Your satisfaction is our #1 priority.
We know you’ll enjoy your new refrigerator and Thank You
for choosing our product. We hope you consider us for
future purchases.
PLEASE READ AND SAVE THESE
INSTRUCTIONS
This Owner’s Guide provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant
to cover every possible condition and situation that may
occur. Common sense and caution must be practiced
when installing, operating and maintaining any appliance.
Please record your model and serial numbers below
for future reference. This information is found on the
serial plate located inside the refrigerator
compartment.
NOTE: Use only soap and water to clean serial plate.
Model Number; 253________________________________
or; 970
________________________________
Serial Number;
Purchase Date;
Please Read All Instructions Before
Using This Refrigerator.
FOR YOUR SAFETY
• Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
• Do not operate the refrigerator in the presence of
explosive fumes.
* Avoid contact with any moving parts of automatic ice
maker.
* Remove ail staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the refrigerator
is unpacked. Children should NEVER use these items to
play. Cartons covered with rugs, bedspreads, plastic
sheets or stretch wrap may become airtight chambers,
and can quickly cause suffocation.
PROPER DISPOSAL OF YOUR REFRIGERATOR
OR FREEZER
Risk of child entrapment
Child entrapment and suffocation
are not problems of the past.
Junked or abandoned refrigerators
or freezers are still dangerous even if they will sit for “just a few
days." if you are getting rid of your
old refrigerator or freezer, please
follow the instructions below to
help prevent accidents.
Before you throw away your old refrigerator/freezer:
• Remove doors.
• Leave shelves in place so children may not easily climb
inside.
• Have refrigerant removed by a qualified service
technician.
1
<
<
IMSb.
.
A
Important Safety
Instructions (cont)
2
WARNING
These Guidelines Must Be Followed To Ensure That
Safety Mechanisms in This Refrigerator Will Operate
Properly.
ELECTRICAL INFORMATION
• The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
into a properly grounded three-prong receptacle. The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
• Immediately repair or replace any power cord that
becomes frayed or damaged.
• Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and puli straight out
from the receptacle to prevent damaging the power cord.
• Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
• Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
• Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
• Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
IMPORTANT: Turning
Controls to “0” turns off
your refrigerator from
the power to the llg
components. To turn off
must unplug the power
the Freezer and Fresh Food
the compressor and prevents
cooling, but does not disconnect
ht bulb and other electrical
power to your refrigerator, you
cord from the wall receptacle.
FULL ONE-YEAR WARRANTY ON
REFRIGERATOR
For one year from the date of purchase, when this
refrigerator is operated and maintained according to the
instructions provided in this Owner’s Guide, Sears wiii
repair this refrigerator, free of charge, if defective in
materia! or workmanship.
FULL FIVE-YEAR WARRANTY ON SEALED
REFRIGERATION SYSTEM
For five years from the date of purchase, when this
refrigerator is operated and maintained according to the
instructions provided in this Owner’s Guide, Sears wiii
repair the sealed system (consisting of refrigerant,
connecting tube, and compressor motor), free of charge, if
defective in materiai or workmanship.
The above refrigerator warranty applies oniy to
refrigerators which are used for storage of food for private
household purposes.
FULL 30-DAY WARRANTY ON KENMORE
REFRIGERATOR WATER FILTRATION CARTRIDGE. If
this Kenmore Refrigerator Water Filtration Cartridge fails
due to a defect in materiai or workmanship within 30 days
from the date of purchase, RETURN |j TO THE
NEAREST SEARS STORE IN THE UNITED STATES
and Sears will replace it, free of charge.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
Warranty service is available by contacting the NEAREST
SEARS SERVICE CENTER/DEPARTMENT in the United
States. See the back page of this manual.
For warranty questions, please contact the following
address:
Sears, Roebuck and Co.
Dept. 81 TWA
Hoffman Estates, IL 60179
m
O
n
C/)
Do not, under \
or bypass the
grounding prong.
Fewer cord with
3-prong grounded plug
circumstances,
remove,
Warranty Information
CANADA
LIMITED WARRANTY
Ken more
Refrigerators
Sears Canada Inc., warrants every new Kenmore refrigerator to be free from defects in material or workmanship.
What Sears will do, free of charge, in case of defect: ;;
Labor: Instal repaired or
replacement part for;
The Compressor
The Sealed System
(consisting of refrigerant,
evaporator, and condenser)
He
(from date of sale
TEN (10) YEARSTEN (10) YEARSFIVE (5) YEARS
FIVE (5) YEARSFIVE (5) YEARSFIVE (5) YEARS
■; either repair ::
....
.
All other parts or
adjustments
X Normal Responsibility of the Customer
W The following items, since they are not manufacturing defects, are not included in the warranty, but are the
responsibility of the customer:
o
z
LU
1} Damage to finish after delivery.
2) Improper power supply, low voltage, or any defects in the house wiring system or appliance not connected
to electric outlet.
3) Replacement of light bulbs.
4} Damage caused by moving the product from its original installation.
5) Service required as a result of alteration, abuse, fire, floods, or acts of God.
6) Providing adequate air circulation to the refrigerating system.
7} Proper use and care of product as listed in the customer's manual; proper setting of the controls.
If any service is required under this warranty, simply call 1-800-FOR-WIY-HOWIE (1-800-469-4663).
This warranty is in addition to any statutory warranty. The above warranty covers Kenmore Refrigerators
sold and operated in Canada only and shall not apply if the refrigerator is used for other than domestic
Maintain the value of your Kenmore refrigerator with a Sears Maintenance Agreement.
SEARS CANADA INC. • Toronto, Canada • MSB 2B8
ONE (1) YEARONE (1) YEARONE (1) YEAR
purposes.
Sears Maintenance Agreement
PRINTED IN U.S.A.
□
PROTECTION AGREEMENTS
Si
...
.
...
...I.I...
g;:
' . ..g'-V: 'V:i:
X; x.,: x,,: gx x.x x.x x.x x.x x.x x.x x.x x.x,
11
i
.........
..........................
.
In the U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase. Your
new Kenmore® appliance is designed and
manufactured for years of dependable operation. But
like all products, it may require preventive
maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you
money and aggravation.
Purchase a Master Protection Agreement now and
protect yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend
the life of your new appliance. Here’s what’s included
in the Agreement;
y Expert service by our 12,000 professional repair
specialists
y Unlimited service and no charge for parts and
labor on al! covered repairs
y “No-lemon” guarantee ~ replacement of your
covered product if more than three product failures
occur within twelve months
Y Product replacement if your covered product
can’t be fixed
y Annual Preventive Maintenance Check at your
request - no extra charge
y Fast help by phone - non-technical and
instructional assistance on products repaired in
your home, plus convenient repair scheduling
y Power surge protection against electrical
damage due to power fluctuations
Y Rental reimbursement if repair of your covered
product takes longer than promised
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service. You
can call anytime day or night, or schedule a service
appointment online.
In Canada
Maintenance Agreements
Your purchase has added value because you can
depend on Sears HomeCentral® for service. With over
2400 Service Technicians and access to over 900,000
parts and accessories, we have the tools, parts,
knowledge and skills to ensure the pledge: We Service
What We Sell.
Your Kenmore® appliance is designed, manufactured
and tested to provide years of dependable operation.
Yet any major appliance may require service from time
to time. The Sears Maintenance Agreement offers you
an outstanding service program, affordably priced.
The Sears Maintenance Agreement
• Is your way to buy tomorrow’s service at today’s
price.
• Eliminate repair bills resulting from normal wear
and tear.
• Provides for non-technical and instructional
assistance.
• Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your appliance is in proper running
condition.
Some limitations apply. For information
concerning Sears Canada Maintenance
Agreements, call 1-800-361-6665
m
O
C/)
Sears has over 12,000 professional repair specialists,
who have access to over 4.5 million quality parts and
accessories. That’s the kind of professionalism you
can count on to help prolong the life of your new
purchase for years to come. Purchase your Master
Protection Agreement today!
Some limitations and exclusions apply. For prices
and additional information, call 1-800-827-6655.
Sears Installation Service
For Sears guaranteed professional installation of home
appliances and items like garage door openers and
water heaters, in the U.S.A. call 1-800-4MY-HOME®.
This Owner’s Guide provides specific operating
instructions for your mode!. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
CAUTION
i
the temperatui
above 110°F (43°C). The compressor will not be able
to maintain proper temperatures inside the
refrigerator.
CAUTION
lower front of your refrigerator. Sufficient air circulation
is essential for the proper operation of your
refrigerator.
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circuiation, and plumbing and electrical
ÇA
-I
o
Z
LU
connections;
Sides STOP
Back
DOOR OPENING
NOTE: If you refrigerator is placed with the door hinge
side against a wall, you may have to allow additional
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food. For best use of drawers
and freezer baskets, the refrigerator should be in a
position where both the refrigerator and freezer doors can
be fully opened.
I
.........
)oh
Do Not block the toe grille on the
----------------
.....................
3/8”
1”
Installation
To Install Toe Grille:
1. Open freezer and
fresh food
compartment doors.
iipii
2. Line up toe grille at
base of refrigerator,
making sure the four
bottom tabs are
resting through holes
at base of cabinet.
3. Starting from left side
of toe grille, press in on first top tab using your thumb
and push toe grille forward until it snaps in place. Continue
this process until all tabs aresnapped in place and toe
grille is secured to refrigerator.
LEVELING
Ail four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator is equipped with adjustable
front rollers to help level your unit. To ensure proper door
seal and assist door closing, the refrigerator should be
tilted 1/4” (6 mm), front to back.
To Level Your Refrigerator:
1. Remove toe grille. (See “To Remove Toe Grille’’.)
2. Use fiat-blade sc re wd rive r or 3/8” socket wrench
to adjust front rollers.
TOE GRILLE INSTALLATION / REMOVAL
To Remove Toe Grille:
1. Open freezer and fresh food compartment doors.
2. WorWng from left side of toe grille, slip your fingers between
top of toe grille and cabinet. Gently puil forward until first set of
t^s are free. Slide your hand down past the free tabs aid puil
forward again untíl frte second set of tabs are free. Continue
this process until all t^s are free and the toe grille can be
removed. (See graphic at top of page in right column.)
3. Check both doors to be sure seals touch cabinet on all
four sides.
installation - connecting Ice Maker To
A WARNING
from electrical power before connecting a water supply fine to the refrigerator.
To avoid electric shock, which can cause death or severe personai injury,
itor
.......
CAUTION
recommended since it greatly
Mi
ËifMl
• DO NOT instaii water suppiy tub
water, ensure that the softener is maintained and working properly.
Before Installing The Water Supply Line, You Will Need
•Basic Toois: adjustable wrench, flat-blade screwdriver, and Phillips™ screwdriver
• Access to a household cold water line with water pressure between 20 and 100 psi.
• A water supply line made of V4 inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
• A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
• A compression nut and ferrule (sleeve) for connecting the water suppiy line to the ice maker inlet valve.
To Avoid Property Damage:
damage if plastic tubing
icaisfrom a malfunctioning softener can damage the ice maker.
RTAI
sure that your water supply line connections comply with ail local plumbing codes.
..
............
.
nected to soft
NOTE: A water line kit is available from your appliance dealer at additional cost, it contain
inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) inch brass complp^phin®^^^^^^
sleeves, and instructions for installing a water supply line. ■ '
To Connect Water Supply Line To Ice Maker Inlet Valve
1. Disconnect refrigerator from electric power source.
2. Place end of water suppiy line into sink or bucket. Turn ON water supply
and flush supply line until water is clear. Turn OFF water suppiy at shut
off valve.
3. Unscrew plastic cap from water valve inlet and discard cap.
4. Slide brass compression nut, then ferrule (sleeve) onto water suppiy line,
as shown.
5. Push water supply line into water valve inlet as far as it will go {V4 inch).
Slide ferrule (sleeve) into valve inlet and finger tighten compression nut
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water suppiy line to rear panel of
refrigerator as shown.
7. Coil excess water supply line (about 2V2 turns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that
leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (see ice maker front cover for
ON/OFF position of arm).
- Copper water line
froiTi household water supply:
(Include enou9h tuhin9 in loop to allow :
moving refrigerator out for cleaning.)
Compression
steel::
CIsmp
Brass
:NÚt:<
m
z
Q
!Z
V)
IMPORTANT It takes approximately 24 hours for the ice maker to begin prodiicing ice. Air ipihippM
cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may'diuSilci fe
or have poor flavor. Discard ice made during the first 24 hours.
Hlrge
9s MW ■■■ ■ ■ -A’’-' Cow ■ I
Door Removal Instructions
№
-I
o
z
LU
Hinge
Screws
„1
i f-i-.. T?
I Ö • ••. 'i ;•• •:
. . . . .
I
Screws
Cover 5crew
1bp Hinge
Cover
IbpHinge
Hinge
Asiembly
Poor
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways,
foilow these steps to remove the doors.
IMPORTANT; Before you begin, turn Freezer and Fresh Foot/controls
to “O” and remove electrical power cord from wall outlet. Remove any
food from door shelves.
1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.
To Remove Refrigerator Door:
1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This will make it easier to realign
doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door
aside.
4. Remove bottom hinge, if necessary.
5. Reverse this procedure to reinstall refrigerator door.
To Remove Freezer Door:
1. Disconnect water line coming from lower hinge of freezer door at connection
located under front of freezer: Press outer ring against face of fitting, then pull
to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on
flat sides of each connector and bend both parts back and forth, then with
firm grasp, pull both pieces apart.
Trace around hinge with soft lead pencil. This will make it easier to realign
doors when they are replaced.
Remove top hinge, allowing wiring harness to pull through hinge and lift freezer
door off of ixittom hinge pin. Lay door dovm flat to avoid kinking water line.
Remove bottom hinge, if necessary.
Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting tube and
push until mark touches face of fitting, replace toe grille and plug in electrical power
cord. Turn both temperature controls to center position. Adjust settings as necessary.
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.