Kenmore 22802, 22832, 22842, 22852, 22854 Feature Sheet

Stock Nos./Reserva Nos./Stock nos.

22802, 22832, 22842, 22852, 22854, 22862, 22872, 22882, 22892, 22894, 23812, 23822, 23832, 23902,

23904, 23912, 23922, 23924, 23932, 23934, 24902, 24904, 24922, 24924, 24932, 24934, 24936

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

Water Level Control

Adjust to load size. Clothes should move freely. To change to a
higher water level after agitating starts, turn knob to desired
setting. On models with Variable Water Level Control, turn the
knob to Reset, then to desired setting.

Water Temperature Control

Select a wash/rinse water temperature based on the type of load.
Some models have AUTO TEMPERATURE CONTROL (ATC). ATC
electronically senses and maintains a uniform water temperature
by regulating temperature of incoming hot and cold water.

Speeds Control

WASH/
SPIN SPEED

Heavy Duty

Normal

Handwash/
Casual

Delicate

Handwash
Plus Fine
Delicates

LOAD TYPE AGITATE/

Sturdy or heavily
soiled loads

Normally soiled
cottons & linens

Lingerie &
loosely knit
items

Washable knits &
permanent press
fabrics

Hand washable and
special care items

SPIN SPEED

High-speed
agitation/
High-speed spin

Low-speed agitation/
High-speed spin

Extra-low speed
agitation/
Low-speed spin

Low-speed agitation/
Low-speed spin

Extra-low speed
agitation/Soak/
Low-speed spin

Cycle Selector (Timer) Control

Permanent Press I

A load cooling spray rinse reduces wrinkling.

Permanent Press II

During the wash cycle, the timer reaches PAUSE, and the washer
cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.

Ultra Clean

You may select this cycle for most loads.

Prewash

Helps to remove heavy soils and stains that need pretreatment. This
cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.

Automatic 2nd Rinse

Removes excess detergent residue. May be automatically added
to the Ultra Clean or Permanent Press cycles. Set the RINSE
OPTIONS Control to 2nd Rinse before you start the washer. You
won’t have to come back later to select a second rinse.

Soak

Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. When
finished soaking, reset the washer to a Spin setting to remove
water. The Soak cycle should be followed by an Ultra Clean or
Permanent Press cycle with additional detergent.

8537146

Cycle Selections continued on next page

Rinse & Spin

Spin Only

May be used when an extra rinse is needed to remove additional
detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control to One
Rinse. Set SPEEDS Control. Set Cycle Selector (Timer) Control to
a Rinse setting, then pull out to start the washer.

A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set RINSE OPTIONS Control to One
Rinse. Set SPEEDS Control. Set Cycle Selector (Timer) Control to
a Spin setting, then pull out to start the washer.