Owner^s Manual
Manual Del Propietario
Manuel Du Propriétaire
. jàÊfiÊ^ WÊÊta
Ki&mwÊGt^^
Vacuum Cleaner
Aspiradora
Aspirateur
Model, Modelo, Modèle
216.37010 (US)
216.31701 (Canada)
CAUTION*
Read and follow all
safety and operating
instructions before first
use of this product.
CUIDADO:
Lea y sigue todas ias
instrucciones de operación
y seguridad antes del uso de
este producto.
ATTENTION :
Veuillez lire toutes les
consignes de sécurité et le
mode d’emploi avant d’utiliser
ce produit.
Sears Brands, LLC, Hoffman Estates, IL 60179 U.S.A. wnww,sears -corn
Part # 1-115603*000 Rev. 9/07
Printed in China
Impreso en China
Imprimé en Chine
' ^ Im IEf ^Tf* I^E INI TT
Before Using Your New Vacuum Cleaner Care,........
Vacuum Cleaner.
Kenmore Vacuum Cleaner
Warranty.
...
important Safety Instructions . .. .4-5
Parts and Features ...........
Assembly Instructions ........ ....7
....
...............
...................
.... 2
..
.... 3
..., 6 And Replacement................ ... .13
Dirt Container and Filter
Removal and Replacement
Exhaust Filter Removal
And Replacement.
Belt or Srushroll Removal
Light Bulb Replacement............. , ....14
Vacuum Cleaner Storage.......... ...14
.....
...............
..................
,,
.10-14
. 11-12
......
Operating Instructions........ . .8-10
Power Cord
Floor/ Carpet Cleaning.
Above Floor Cleaning
Pet Handt-Mafe.....................................
....
....................
.....
....................
____
.....9
,.,.10
. ...10
8
Troubleshooting..................
Pi*ofBction /V3r€S0lTi©nts , 16
Requesting Service...... (back page)
..
— ... 15
BEFORE USING YOUR NEW VACUUM CLEANER
Piease read this guide.. It will help you assemble and operate your new Kenmore vacuum
cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, cal! your nearest Sears
store. You will need the complete model and serial numbers when requesting information.
Your vacuum cleaner’s model and serial numbers are located on the Mode! and Serial
Number Plate.
12
Use the space below to record the model number and serial number of your new
Kenmore vacuum cleaner.
Model No.
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference .
l::KIMril9l= II llUf f'l tSAkHrO lAfAI9i?AMTV
amCZtlv Iwl ^Mir \p iir% 1»# %ir l\i I liiF Ew Ew jr^ 111 Cp if I 1
ONE YEAR LIMITED WARRANTY ON KENMORE VACUUM CLEANER
When installed, operated and maintained according to ail insiniciions supplied with the
product, if this appliance fails due to a defect in materia! and workmanship within one year
from the date of purchase, return it to any Sears store, Sears Parts & Repair Service Center,
or other Kenmore outlet for free repair.
If this appliance is ever used for other than private family purposes, this warranty applies for
only 90 days from the date of purchase.
This warranty covers only defects in material and workmanship. Sears will
NOT pay for:
t. Expendable items that can wear out from normal use, including but not limited
to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation,
operation or maintenance.
3. A service technician to clean or maintain this product
4. Damage to or failure of this product if it is not installed, operated or maintained
according to the ail instructions supplied with the product
5. Damage to or failure of this product resulting from accident, abuse, misuse or use
for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners,
chemicals or utensils other than those recommended in all instructions supplied
with the product
7. Damage to or failure of parts or systems resulting from unauthorized modifications
made to this product.
>; ’ ■
Disclaimer of implied warranties; limitation of remedies
Customer’s sole and exclusive remedy under this limited warranty shall be product repair
as provided herein. Implied warranties, including warranties of merchantability or fitness
for a particular purpose, are limited to one year or the shortest period allowed by law. Sears
shail not be liable for incidental or consequential damages. Some states and provinces do
not allow the exclusion or limitation of incidental or consequential damages, or limitation
on the duration of implied warranties of merchantability or fitness, so these exclusions or
limitations may not apply to you.
This warranty applies only while this appliance is used in the United States or Canada.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5D 2D8
IMPORTANT SAFETY INSTRUCTIONS
Your safety is important to us. To
A
WARNING
reduce the risk of fire, electrical
shock, Injury to persons or damage
vifHom yoLii* \^3c#iitJiin ciosmcr
follow basic safety precautions
FEEAD At-L. IW3TNlliJC*T*IONI3
IN THIS MANUAL BEFORE
ASSEMBLING OR USING YOUR
VACUUM CLEANER.
Do not use outdoors or on wet
surfaces. Electrical shock could
occur.
Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
Use only as described in this
manual Use only manufacturer’s
recommended attachments.
I Do not use with damaged cord or
plug. If appliance is not working
as it should, has been dropped,
damaged, left outdoors, or dropped
into water, return it to a service
center for Inspection, Call 1-877
839-2046 to locate the nearest
service centers.
Do not pull or carry by cord, use
cord as handle, close a door on
a cord, or puli cord around sharp
edges or comers. Do not run
appliance over cord. Keep cord
away from heated surfaces.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not leave appliance when
plugged in. Unplug from outlet when
not in use and before servicing.
Do not handle plug or
appliance with wet hands.
Do not put any objects into
openings. Do not use with any
opening blocked; keep free of dust,
lint, hair, and anything that may
reduce air flow.
Keep hair, loose clothing,
fingers, and all parts of body away
from openings and moving parts.
Do not pick up anything that is
burning or smoking, such as
Do not use without dirt container
and filters in place.
Turn off all controls before
unplugging.
i l%r* Mwvf LVi f lOf 1111 IdlLJiv?
or combustible liquids, such as
gasoline, or use in areas where they
may be present.
Keep the vacuum cleaner on the
floor. Do not use on stairs.
Do not use an extension cord with
this vacuum cleaner.
StfirA the UACiiiim Hpener inrinnrQ
Put vacuum cleaner away after use
to prevent tripping accidents.
t*A niAk-iifi
I I Ttrf w LfL* Li III s#l 1 I La I 11 IL# n
IMPORTANT SAFETY
■ i w I M , Щц0 l.m ■ - mmm Ш , ■
Using improper voitage may result
in damage to the motor and possible
injury to the user. Proper voltage is
listed on the cleaner plate.
Unplug before connecting Pet
Handi-IVIate.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your
responsibilities. Your vacuum cleaner is intended only for Household
use. Read this Owner’s Manual carefully for important use and safety
information. This guide contains safety statements under warning
and caution symbols. Please pay special attention to these boxes and
follow any instructions given.
Your cleaner contains a thermal protective device to shut off the motor to
avoid overheating. If this happens, turn switch off and unplug the cleaner.
Inspect the exhaust, inlet, and filters for any blockage. Empty the dirt
container and dean filters. After approximately 30 minutes the motor will
have cooled and the vacuum will be ready to use. Note: The cleaner
must remain unplugged during the 30 minute cooling period.
V mum I I a ■■■ 11 ■ Ш Ш Ш %nr I
WARNING: The cords, wires, and/or
cables supplied with this product
contains chemicals, including lead or
lead compounds, known to the state
of California to cause cancer and
birth defects or other reproductive
harm. Wash hands after using.
It is important to know your vacuum cleaner’s parts and features to assure its proper and
62 ltCC3s $i^£362£3i ilCIfin V/T^l II" \/S3r't II ll^T) l"*lD23-nOf"
wiCIIC? MOC7ii iXwyiwVV \PlCSOvf<* ln^^lv/lw tJIOrlllw ^wvli VCIwIrJUIIII wiwOil Iv7l«
Item Part No. Style No.
Sfii
Pleated Filter 301974002 DCF-4
Belt 1-860140-600
Handle
Cord clip
Cany handle
UB-11
Pet Handi-Mate
Dirt container
release latch
Filter
Dirt container
Exhaust cover
(exhaust filter
inside)
Headlight
Height
adjust
knob
^Stretcl^
hose
Extension wand
& Crevice tool
C0td
Dost Brush
Power
OnfOff
switch
Wheels
Extension
wand
Bumper
Pet Handi-Mate
Crevice tool
r(
Extension wancfs
Nozzle
Dust
brush
.. ............................
^
_______________
T
.
)
A
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such dangers as
fire, electric shock, burns and personal injury. CAUTION statements alert
you to such dangerous personal injury and/or property damage.
ACISCIIIIiSl V iMdTDl
AddClWtSlwi'Y ' liMd I I lUIMw
A
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or
injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover
of the separate REPAIR PARTS LIST or
on the carton., Use this list to verity that
you have received all the components of
your new Kenmore vacuum cleaner.
WARNING
HANDLE ASSEMBLY
1. Attach upper
handle to main
body of cleaner.
A
Do not overtighten.
Overtightening could strip the
screvsr holes.
Do not operate the vacuum
cleaner without the screws in
place.
CAUTION
EXTENSION WAND/
CREVICE TOOL
PLACEMENT
Place the crevice tool (A) in the top of the
extension wand. Place in wand holder on
left side of vacuum cleaner. Place the extra
extension wand (B) in the wand holder on
lllc; \jI Llicir VciUUUIIi L«fCrCtifk;l.s
olHlisi If lint i^ioiai^i^ati“
2. Push handle
plug onto the
front of cleaner.
Insert the one
(1) screw into
the back of the
handle and
tighten, making
sure the handle
plug is secure.
OPERATING INSTRUCTIONS
POWER CORO
1. Turn the quick release upper cord hook
to either side and down to release the
power cord.
A
To reduce the risk of electric
shock) this eppliance has a polarized
plug (one blade is wider than
the other)« This plug will fit in a
polarized outlet only one way. if
1 w m
the plug does not fit fuily in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. Do not change the plug in
any way.
WARNING
2. Detach the power cord
plug from the power cord.
Make sure the power
cord is placed into the
cord clip on the body as
shown.This helps keep
the power cord out from
under the vacuum cleaner
nozzle.
3. Piug the polarized
power cord into a 120
Volt outlet located near
the floor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
WARNING
Personal Injury and Product
Damage Hazard
■ DO NOT plug in if switch is in
the ON position. Personal injury
or damage could result.
* DO NOT use outlets above
counters. Damage from cord to
items in surrounding area could
OCCUTt
» Ep* I ^#L»C»i(fflLlNI I
HEIGHT ADJUST KNOB
IMPORTANT; For easiest adjustment,
place deaner in full upright position.
Turn the height adjust knob to match the
surface being cieaned.
ON/OFF BUTTON
Turn cleaner on by depressing foot
pedal located on the back left side of the
deaner.
Rotate the handle and adjust it to the
desired position for (A) storing the upright,
(B) operating the cleaner, and |C) to dean
under furniture. NOTE: Rotating brush
could cause area rug fringe to become
tangled within deaner. Use caution when
vacuuming any rugs with fringe.
HANDLE RELEASE
To release handle, push the handle
release pedal located on the lower left
side of the cleaner.
CARRY HANDLE
Use the carry handle located on the back
of the cleaner to carry from room to room.
ABOVE FLOOR CLEANING
PET HAN DI-MATE
A
Brush agitator continues to rotate
while hose is renrioved or in use
and at all times while cleaner is on.
Keep hair, loose clothing, fingers,
and all parts of body away from
brush area while cleaner is on.
Cleaner must be in the upright
position to lift the rotating brushroll
off the carpet when cleaning
above the floor.
CAUTION
Cleaner must
be in its upright
position to raise
brushroll from
fioon Remove
the hose from
the tool caddy.
Attach the Pet Handi-Mate to the hose
wand. Brushroll will start automaticaliy.
The Pet Handi-Mate can be used for
cleaning stairs and upholstery.
OcliSKId IxCiVICJVAL
Slide locking tabs to outward position
to unlock. Pivot lower housing and
remove clog.
Choose any of the handy accessories
or use the hose alone. Simply push the
attachment firmly onto the end of the
wand or hose handle. To remove tool,
twist and pull apart gently.
If additional length is needed, use the
extension wand and crevice tool. Use
extension wand and crevice tool together
or separately.
I i"i5Li3C!tCQInrtI£3 SlifnS^ Tdl^CS
1 w i I iltiris#) Oll^f I iOlLfOl v/il IvIVvN^f
housing with the slots on the cover and
pivot cover back Into position on top
of lower housing. Rotate locking tabs
inward into locking position.
10
VACUUM CLEANER CARE
Uil\l ImtwN I AINtZK',l\ESiVlVJV/%Im r%NLI KEr LaAwl^lViCiM I
A |3iriUm\#AI Akin I^CSli Af^iZiMIEZMT‘
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicIriQ or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
Note: For best performance, replace
filter a minimum of every 6 months.
EMPTY dirt CONTAINER
Press dirt container
release button and
remove dirt container
from cleaner.
pleated lid FILTER: Each time the dirt
container is emptied, the filter should be
cleaned. Filter will be discolored after use;
this will not affect the filter’s performance.
Do not brush the filter.
Tap the lid on the
inside of a garbage
can to remove
excess dust and dirt
from filter. DO NOT
APPLY WATER TO
f^l r*A“T“f**r^ r“li I""'».*
PLirA I cD rlL I cRf
Return lid to dirt
container and lock
into place. Align
arrow on lid with
arrow on dirt con
tainer and twist to
“LOCK” position.
Empty contents of dirt container into
garbage can.
Twist and lift dirt
container lid to
remove.
Return dirt container
by latching to base
of unit.
NOTE: The bottom of the dirt container
must be placed behind the plastic rib on
the top of the motor housing. Failure to
properly locate the dirt container will result
in a loss of performance and may cause
debris to leak from the dirt container while
vacuuming.
11
FOAM FILTER CARE
Remove foam filter
from dirt container.
i
Return filter to dirt
container by placing
on top of screen
inside dirt container.
IMPORTANT: Do not return filter
Hold filter under
running water to
wash. Ring excess
water out of filter.
Allow filter to dry for
at least 24 hours.
to the dirt container before it has
completely dried.
EXHAUST FILTER REMOVAL AND REPLACEMENT
Remove exhaust filter from deaner. Tap
WARNING
filter on inside of garbage can to remove
excess dust and dirt from filter.
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
Note: For best performance, replace the
exhaust filter a minimum of every 6 months.
Grasp tab on exhaust filter cover and
pivot forward to remove.
Return exhaust filter to cleaner. Replace
exhaust filter cover by inserting the tab
on the cover Into the slot on the cleaner.
Pivot toward deaner until cover snaps
into place.
12
BELT OR BRUSHROLL REMOVAL AND REPLACEMENT
TO REPLACE BELT
A
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
WARNING
TO REMOVE BELT
Lay cleaner flat and flip cleaner to expose
nozzle base. To remove nozzle guard, slide
Jock A to unlock position, to the left. Then
depress lock B to unlock nozzle guard.
Rotate/pivot the
nozzle guard and
pull off
OR BRUSHROLL
Slide belt onto motor
shaft.
Place new belt in area
of brushroil without
bristles.
With new belt in place,
pull and slide brushroil
into nozzle making
sure that the brushroil
end caps are in the
correct orientation (see
diagram for end cap
orientation). Rotate
brushroil manually
to make sure belt is
properly aligned.
Secure by aligning
the three (3) tabs
in the base slots.
To reattach nozzle
guard, rotate/pivot
back Into position.
® Lift and remove
brushroil. Dispose
of old belt.
To secure nozzle
guard, push lock B
down to lock position.
Slide lock A into lock
position, to the right.
13
I IIZMIT SXIII Ct CHXDI ai^crabImx
I jE5lePS™ES imCEÍ"^d»lwl 1CI» i
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
DC|l/|fl\/C I IIhMT PII II D
TO
1. Disconnect power cord from electrical outlet
2. Press handle release pedal and lay
vacuum cleaner back.
I vksuMflVI *Wir wf »HI* aHM» JH I Ibifll lyy nnHiliNV
3. Remove the two
(2) screws from the
ens cover.
CAUTION
Do not use a bulb rated over 9W
{13V). During extended use^ heat
from the bulb could overheat
surrounding plastic parts.
5. Pull bulb out of
socket. Do NOT
twist Gently push
replacement bulb into
socket to replace.
6. Snap fens cover
back into place and
secure the headlight
lens by replacing the
two screws.
4. Insert flat blade of
screwdriver into slot
at top of the lens.
Lift the lens cover to
remove.
VACUUM CLEANER STORAGE
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord.
Store the vacuum
cleaner in a dry,
indoor area, on the
floor with the handle
locked in the upright
position.
Note: See separate PARTS LIST for bulb
number
WARNING
Electrical Shock and Personal
Injury Hazard
Wrapping the cord too tightly
puts stress on the cord and can
cause cord damage.
14
TROUBLESHOOTING
Review this table to find do-it-yourself solutions for minor performance problems. Any
service needed, other than maintenance described in this Owner's Manual, should be
performed by a Sears or other qualified service agent.
A
WARNING
Disconnect electrical supply before performing maintenance to the unit.
Failure to do so could result in electrical shock or personal injury.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won’t run
Cleaner won’t pick
up or low suction
Oust escaping
from cleaner
Cleaner tools
won't pick-up
Headlight not
working
Cleaner is difficult
to push
1. Power cord not firmly plugged
into outlet
2. Blown fuse or tripped breaker,
3. Thermal Protector activated-
4. Needs service.
1. Dirt container not installed
correctly.
2. Dirt container full
3. Brushroll worn,
4. Broken or worn belt.
5. One or both filters clogged
e. Carpet height setting is
incorrect
1. Dirt container full
2. Dirt container not installed
correctly
3. Hose not installed correctly
4. One or both fiiters not installed
completely
1. Hosectogged-
2. Olrl container full
3. One or both filters clogged.
1, Bulb burnt out
2. boose electrical wires.
1. Carpet height setting is
Incorrect.
2. Broken or worn belt
1. Plug unit in firmly,
2. Check fuse or breaker in home. Replace
fuse/reset breaker.
3. Allow cleaner to cool - Pg, 5.
4. Take to Sears Service Center.
1. Review DIRT CONTAINER REMOVAL AND
REPLACEMENT-Pg, 11, 12
2. Empty dirt container - Pg. 11.
3. Replace brushroil - Pg 13
4. Replace belt - Pg. 13.
5. Remove filters and clean - Pg. 11,12,
Set carpet height adjust lever to appropriate
setting for carpet being cleaned - Pg. 9-
1. Empty dirt container - Pg 11.
2. Review DIRT CONTAINER REMOVAL AND
REPLACEMENT - Pg. 11, 12,
3. Review hose placement - Pg 6
4. Review filter removal and replacement -
Pg 11,12
1, Check inlets, hose and dirt container for
obstructions; remove obstruction if clog
persists, calil-877-839-2046.
2, Empty dirt coritainer - Pg 11
3, Clean filters-Pg, 11.12.
1. Replace bulb-Pg 14
2- Take to Sears Service Center
1. Set carpet height adjust fever to appropriate
setting for carpet being cleaned - Pg 9
2, Repiace belt - Pg. 13
For any c|uestions, |3lease call 1-877-839-2046.
15
MASTER PROTECTION AGREEMENT
Congratulations on making a smart purchase. Your new Kenmore® product is designed
and manufactured for years of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time. That's when having a Master
Protection Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new product. Here’s
what the Agreement* includes;
13 Parts and labor needed to help keep products operating properly under normal
use, not Just defects. Our coverage goes well beyond the product warranty. No
deductibles, no functional failure excluded from coverage “ real protection.
3 Expert service by a force of more than 10,000 authorized Sears service
technicians, which means someone you can trust will be working on your product.
3 Unlimited service calls and nationwide service, as often as you want us, when
ever you want us.
3 “No-lemon” guarantee - replacement of your covered product if four or more
product failures occur within twelve months,
3 Product replacement if your covered product can’t be fixed.
[3 Annual Preventive Maintenance Check at your request ~ no extra charge.
0 Fast help by phone - we call it Rapid Resolution - phone support from a Sears
representative on all products, Think of us as a "talking owner's manual.”
0 Power surge protection against electrical damage due to power fluctuations.
0 $250 Food Loss Protection annually for any food spoilage that is the result of
mechanical failure of any covered refrigerator or freezer
0 Rental reimbursement if repair of your covered product takes longer than promised.
0 10% discount off the regular price of any non-covered repair service and related
installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to
schedule service. You can call anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason
during the product warranty period, we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires. Purchase your Master Protection
Agreement today!
Some limitations and exclusions apply. For prices and additional information In
the U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full details call Sears Canada at
1 »800-361»6665.
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters,
and other major home items, in the U.S.A, or Canada call 1-800-4-!VIY-HOME®,
16
Get
It
fixed, at your home or ours!
Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME
(1-800-4S9-4663)
www.sears.com
Anytime, day or night
(U.S A. and Canada)
www.sears.ca
For expert home solutions advice: www.managemyhome.com
Our Home
For repair of carry-ln products like vacuums, lawn equipment,
and electronics, cail or go on-ilne for the nearest
O03iS r^0iTS allQ tv&puir w0niL6r.
1-800-488-1222 Anytime, day or night {U.S.A. only)
www.sears.com
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U S A ) 1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
1-888-SU-HOGAR®
(1-888-784-6427)
Au Ganada pour service en français:
1-800-LE-FOYER***'
(1-800-533-6937)
www.sears.ca
© Sears Brands, LLC
® Registered Trademark / ™ Trademark / Service Mark of Sears Brands, LLC
® Marca Registrada i ™ Marca de Fábrica i sm Marca de Servido de Sears Brands, LLC
Mc Marque de commerce I Marque déposée de Sears Brands, LLC
Loading...