Kenmore 141.173292, 141.163292 Owner's Manual

OPERATOR'S MANUAL

Liquid Propane Gas Grill

Model 141.163292

Natural Gas (NG) Grill

Model 141.173292

• Safety

• Assembly

• Use and Care

• Cooking Guide

• Frequently Asked Questions

(LPG)

Call us first if you have any problem with this product. We can help you with questions about assembly and grill operation or if there are damaged or missing parts when you unpack this unit from the shipping box. Please call before returning to the store.

1- 888-317-7642

8am-8pm CST, Monday throu.qh Friday

• NOTE TO ASSEM BLER/INSTALLER: Leave this manual with the consumer.

• NOTETO CONSUMER: Keep this manual for future reference.

• RECORDYOURSERIAL# (see silver CSA label on main body of grill)

Failure to comply with these instructions could result in a fire or explosion that could cause

serious bodily injury, death or property damage.

Whether this grill was assembled by you or

someone else, you must read this entire manual

before using your grill to ensure the grill is properly assembled, installed and maintained.

Use your grill at least 3 feet away from any wall or surface. Use your grill at least 3 feet away from combustible objects that can melt or

catch fire (such as vinyl or wood siding, fences and overhangs) or sources of ignition including

pilot lights on water heaters and live electrical appliances.

THIS GAS APPLIANCE IS DESIGNED FOR

OUTDOOR USE ONLY.

Combustion byproducts produced when using this product contain chemicals known to the

State of California to cause cancer, birth defects, or other reproductive harm.

Manuai# P80120003L - Date:2006/01/26

Primary Safety Warnings ........................... 1-3

Warranty Terms and Conditions .................. 2

Pre-Assembly Instructions .............................. 3

Part Diagrams and Lists .......................... 4-7

Assembly Instructions ............................... 8-13

LP Gas Tank Installation ...................... 14-16

Natural Gas Connection .............................. 17

Use & Care Instructions:

• Lighting Instructions ................................. 18

• Troubleshooting ......................................... 19

Cleaning and Maintenance ..................... 20-21

Cooking Guide ........................................ A1-A6

Frequently Asked Questions ................ A7-A8

One-Year Full Warranty on Kenmore Grill If this grill fails due to a defect in material or work- manship within one year from the date of purchase,

call 1-800-4-MY-HOME ®toarrange for free repair (or

replacement if repair proves impossible).

Additional Limited Warranty on Specific Grill

Parts From the date of purchase for the time

periods listed below, the following specific grill parts will be supplied free of charge if they

fail to meet the conditions described. After the first year from the date of purchase, you pay

for labor if you wish to have them installed.

• Stainless Steel Parts - 5 years (except Stainless Steel Tube Burners - 10 years), no rust-through

• Porcelain coated parts - 3 years, no rust-through

• Cooking grids - 3 years, no rust-through

• Powder coated parts - 2 years, no rust-through

• Savor Plates® - 2 years, no rust-through

IF YOU SMELL GAS:

1. Shut off gas to the appliance.

2 Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from

the appliance and immediately call your gas supplier or your fire department.

Leaking gas may cause a fire or explosion which could result in property

damage, personal injury or death.

1. Do not store spare LP cylinder

within 10 feet (3m) of this appliance.

2. Do not store or use gasoline or other flammable liquids and

vapors within 25 feet (8m) of this appliance.

3. When cooking with oil/grease, do not allow the oil/grease to get hotter than 350°F (177°C).

4. Do not leave oil/grease unattended.

All warranty coverage excludes ignitor batteries and grill paint loss (except as specified above) or rusting (except rust-through as specified above), which are

either expendable parts that can wear out from nor- mal use in less than a year, or are conditions that

can be the result of normal use, accident or improper maintenance.

All warranty coverage is void if this grill is ever used for commercial or rental purposes.

All warrranty coverage applies only if this grill is used in the country where purchased.

This warranty gives you specific legal rights, and you may have other rights which vary

from state to state.

Sears, Roebuck and Co., Dept. 817WA,

Hoffman Estates, IL 60179 U.S.A.

The Grease Draining Tray and Grease

Receptacle must be visually inspected before each grill use. Remove any grease

and wash Grease Draining Tray and Grease Receptacle with a mild soap and

warm water solution. Failure to comply

with these instructions could result in a grease fire or explosion that could

cause serious bodily injury, death or property damage.

Grill Installation Codes

The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or CANICGA-

B149.1, Natural Gas and Propane Installation Code.

Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death or property damage.

Spiders and small insects can spin webs and nest in the grill Burner Tubes during transit and warehousing whi_ gas flow

obstruction around the

Burner Tub_ "K FIRE" can an

unsafe To redt

must cll before

initial ul in summer active in your used

for an

1. Remove th_ Burner using a Phillit:

2. Carefully lift each Burner up and away from the

Gas Valve Orifice.

3. Check and clean Burner/Venturi Tubes for insects

and insect nests. A clogged tube can lead to a fire beneath the grill.

4. Refer to the figure below and perform one of these 3 cleaning methods:

[] METHOD 1: Bend a stiff wire or wire coat

hanger into a small hook as shown and run the hook through the Burner Tube and inside

the Burner several times to remove debris.

TO CLEAN BURNER TUBE, iNSERT HOOK HERE

BumerTube

[] METHOD 2: Use a bottle brush with a flexible

handle and run the brush through the Burner Tube and inside the Burner several times to

remove any debris.

[] METHOD 3: Use an air hose to force air

through each Burner Tube. The forced air should pass debris or obstructions through

the Burner and out the Ports.

For safe operation ensure the Gas Valve Assem- bly Orifice is inside the Burner Tube before using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may cause explosion and/or fire resulting in serious

bodily injury and/or property damage.

uuuuuuuuuuuuuuuuuu[

Gas Valve Assembly Orifice BurnerTube

LPG grill models must be used with Liquid Propane Gas and the regulator assembly supplied. Natural Gas models must be used

with Natural Gas only. Any attempt to convert the

grill from one fuel type to another is extremely hazardous and will void the warranty.

Never use your gas grill in a garage, porch, shed, breezeway or any other enclosed area.

Never obstruct the flow of ventilation air around your gas grill housing.

Never disconnect the gas regulator or any gas

fitting while your grill is lit. A lit grill can ignite

leaking gas and cause a fire or explosion which could result in property damage, personal injury

or death.

Keep gas regulator hose away from hot grill surfaces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call Sears at 1-8O0-4-MY-HOME _ (1-800-469-4663)

for a Sears replacement hose.

PRE-ASSEMBLY

Read and perform the following pre-assembly instruc-

tions:

[] Tools Required for Assembly include:

• protective work gloves

• protective eyewear

• #3 Phillips Head Screwdriver (included in hardware pack in Parts Box)

[] You will need assistance from another person to

handle the grill head and other large, heaw parts.

[] Open Lid of shipping carton and remove parts box

and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

[]

Slice all four corners with a utility knife to lay open the carton. This allows you to remove the grill head and components packed inside.

[]

Use the Hardware and Part Diagrams to ensure all items are included and free of damage.

[]

Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box or you have

questions during the assembly process, call the: Grill Information Center I -888-317- 7642 8am-8pm CST, Monday throu.qh Friday

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06001051A Hardware Pack for NG Model 1 For use in assemblyofNG Mode1173292 $112G04321 Phillips Head Screw 1/4"x2"

$112G04081 Phillips Head Screw 1/4"xl/2" $112G04321 Phillips Head Screw 1/4"x2"

$112G03061 Phillips Head Screw 3/16"x3/8" 2 Attaches Door Guide Plate to Cart Bottom Shelf

................8 Attaches Car! Legs w!! h S!de Pane! !o Ca_ Bottom ............................................

4 Attaches Cart Rear Panel to Cart Legs with Side Panel 4 Attaches Door Bracket to Cart Legs with Side Panels

Sli2G64 6 Screw i)4"xi--31i6'; 4 Attaches Bowl to Cart

$112M04081 Phillips Head Screw M4x8mm 2 Installs Side Burner Gas Valve to Side Burner Frame

$233G04572 Wing Boii i/4,,x6,11/16,; 1 ......

S303G0404D Special Nut 1/4" 1 Secures Gas Tank

n !o

Already installed in the Tool Holder Kit

PhiiiipsHead MSx8mm 2 Attaches Sheif.....

Phillips Head Screw 1/4"xl/2" Qty 4 (LPG Model)

Qty 6 (NG Model) Part # S112G04081

(Stainless Steel)

Phillips Head Screw 1/4"x3/4"

Qty. 14 Part # $112G04121

(Stainless Steel)

Lighting Stick Qty. 1

Part # P05313023B Scale 1:2

Wrench/No.17 Customized Qty. 1

Part # P05515101L

Scale 1:2

Phillips Head Screw 1/4"xl-3/16"

Qty. 4

Part # S112G04191

(Stainless Steel)

Phillips Head Screw M4xSmm

Qty 3 Part # $112M04081

(Stainless Steel)

Special Nut 1/4" Wing Bolt 1/4"x6-11/16" Qty 1 Qty 1

Part # S303G0404D Part # S233G04572 (Btack Painted) (Btack Painted)

Scale 1:2 Scale 1:2

Control Knob for Side Burner Qty. 1

Part # P03426083H Scale 1:2

Phillips Head Screw 1/4"x2" Qty 12

Part # $112G04321 (Stainless Steel)

Phillips Head Screw 3/16"x3/8"

Qty 6 Part # $112G03061

(Stainless Steel)

_/!/!/!/;/!/!/!/!/!/!/!/!/;/!1

r iHardware already installed in the Tool Holder Kit

I Qty 2 I (Stainless Steel)

* One Battery/AA included in the Hardware Pack.

Phillips Head Screw M5x8mm Part # $112M05081

I I I

7 6_

AI0

KEY _ DESCRIPTION PART # QTY

1 Lid P00119146A 1

1A Lid Trim Plate P0011409DV 1

2 Protective Pad P055180011 4

P00601071A 1

4 Name Plate P00410037C 1

5 Lid Handle P00205034B 1 6 Cooking Rack/Secondary P01515004B 1

.............................7 Cooking................................................................................................................................................................Grid ............P0;1604004B ....................5

8 Savor Plate® P01708009B 5 9 Bowl Panel, Left P00720653C 1

10 :Bowl Panel, Right P00721653C 1

14 Burner/Main (LPG only) P02008010A 5

BumerlMain (NG only) P02008011A 5

15 Burner Bracket P0221001 CA 1 16 Gas Collector Boxwith Electrode P02608002A 4

17 Electric Wire Set P02615024A 1 18 :Electric Ignitor, 4-Port P02502164C 1

19 Gas Valve/Manifold Assembly(LPG only) Y0060319 1

Gas Valve/Manifold Assembly(NG only) Y0060320 1

20 Decorative Front Cover P07508005A 1 21 Control Panel (LPG only) P02909081B 1

Control Panel (NG only) P02909081G 1 22 Control Knob for Main Burner P03419023H 5 23 Control Knob Seat P03415263L 5

24 Grease TrayTrack, Left P05330006C 1 25 Grease TrayTrack, Right P05330007C 1

26 Grease Draining Tray P02707074A 1 27 Grease Receptacle P02701087B 1

.......................................................}................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

28 Side Shelf, Left P01106006B 1 29 Tool Holder P05514008A 1

30 Tool Hook P05514053F 4 31 Cart Bottom Shelf (LPG only) P01004047C 1

32 Cart Bottom Shelf (NG only) P01004048C 1 33 Cart Legs with Side Panel, Left P07614005A 1 34 Cart Legs with Side Panel, Right (LPG only) P07615007A 1

35 Cart Legs with Side Panel, Right (NG only) P07615008A 1 36 Cart Rear Panel (LPG only) P07701058A 1 37 Cart Rear Panel (NG only) P07701059A 1 38 Cart Bracket, Front P03306023C 1

39 Door Stop Plate P05510002L 4

KEY ;; DESCRIPTION PART#

40 Door Guide Plate P05510006A

42 Door Magnet

QTY

44 Door Spacer

46 Door Handle P00205029B 2

48 Door Hinge Bracket, Right

................... ....................................................................................................................................................................................................................................................................................................................................................i...........................

52 Regulator,_.s sem bly (NG only) Y0080016 1

......53 Reguiator ........................ P033030i 6J ............. i

54 Connection Tube (NG only) P03705018A 1

A2 Side Burner Body

A4 Side Burner Pot Support ,_-5 Side Burner Electrode P02607053L i

A6 Assembiy iLPG oniyi ....... Y0060321 .............. i

..................................................Side BUr ..................................................................................................................Y0660322 ..........................................................i ...............

A8 Control Knob Seat P03415063L 1

A9 Side Burnerwith Brass Ring (LPG only)

A12 Side Burner Body Bracket

Hardware Pack (LPG only)

For the repair or replacement parts you need:

Call anytime 1-800-4-MY-HOME® (1-800-469-4663)

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed Important: Use only Sears replacement parts. The use of any part that is not a Sears replacement part

can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.

Install Casters

[] Place the Cart Side Panels on the cardboard

Install the 4 Casters onto the Caster Seats

as shown.

(

Wrench/No.17 Customized Qty. 1

Part # P05515101L

Scale 1:2

Install Cart Side Panels to Cart Bottom Shelf [] Install the left and right Cart Side Panels (parts

are labeled L or R) to Cart Bottom Shelf.

Phillips Head Screw 1/4"x2"

Qty. 8

Part # $112G04321 (Stainless Steel)

Install Cart Rear Panel

[] Install the Cart Rear Panel between rear cart Legs as shown.

Phillips Head Screw 1/4"xl/2" Qty. 4

Part # S112G04081 (Stainless Steel)

H nstall Door Bracket

[] Install the Door Bracket in the up position (part is labeled UP

to ensure proper assembly) between front Cart Legs as shown.

Phillips Head Screw 1/4"x2"

Qty. 4

Part # S112G04321

(Stainless Steel)

+ 21 hidden pages