Kenmore 14117326 Owner’s Manual

Liquid Propane Gas (LPG) Grill

Model 141.16326

Natural Gas (NG) Grill

Model141.17326

OPERATOR'S MANUAL

• Safety

• Assembly

• Use and Care

• Cooking Guide

• Frequently Asked Questions

Call us first if you have any problem with this product. We can help you with questions about

assembly and grill operation or if there are damaged or missing parts when you unpack

this unit from the shipping box. Please call

before returning to the store.

1- 888-317-7642

8am-8pm CST, Monday throuqh Friday

• NOTE TO ASSEM BLER/INSTALLER: Leave this manual with the consumer.

• NOTETO CONSUMER: Keep this manual for future reference.

• RECORDYOURSERIAL# (seesilver CSA label on main body of grill)

Failure to comply with these instructions could

result in a fire or explosion that could cause serious bodily injury, death or property damage.

Whether this grill was assembled by you or someone else, you must read this entire manual before using your grill to ensure the grill is properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

wall or surface. Use your grill at least 3 feet

away from combustible objects that can melt or catch fire (such as vinyl or wood siding, fences and overhangs) or sources of ignition including pilot lights on water heaters and live electrical appliances.

THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY.

Combustion byproducts produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Manuai# P80120004H - Date:2006/0!/26

Primary Safety Warnings ........................... 1-3

Warranty Terms and Conditions .................. 2

Pre-Assembly Instructions .............................. 3

Part Diagrams and Lists .......................... 4-7

Assembly Instructions ............................... 8-13

LP Gas Tank Installation ...................... 14-16

Natural Gas Connection .............................. 17

Use & Care Instructions:

• Lighting Instructions ................................. 18

• Troubleshooting ......................................... 19

• Cleaning and Maintenance ................ 20-21

• Cooking Guide ................................... A1-A6

• Frequently Asked Questions ............ A7-A8

One-Year Full Warranty on Kenmore Grill

If this grill fails due to a defect in material or work- manship within one year from the date of purchase,

call 1-800-4-MY-HOME ®to arrange for free repair (or

replacement if repair proves impossible).

Additional Limited Warranty on Specific Grill

Parts

From the date of purchase for the time periods listed below, the following specific grill parts will be supplied free of charge if they

fail to meet the conditions described. After the first year from the date of purchase, you pay

for labor if you wish to have them installed.

• Stainless Steel Parts - 5 years (except Stainless Steel Tube Burners - 10 years), no rust-through

• Porcelain coated parts - 3 years, no rust-through

• Cooking grids - 3 years, no rust-through

• Powder coated parts - 2 years, no rust-through

• Savor Plates® - 2 years, no rust-through

All warranty coverage excludes ignitor batteries and grill paint loss (except as specified above) or rusting (except rust-through as specified above), which are either expendable parts that can wear out from nor- mal use in less than a year, or are conditions that can be the result of normal use,accident or improper

maintenance.

All warranty coverage is void if this grill is ever used for commercial or rental purposes.

All warrranty coverage applies only if this grill is used in the country where purchased.

IF YOU SMELL GAS:

1. Shut off gas to the appliance.

2 Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

Leaking gas may cause a fire or explosion which could result in property damage, personal injury or death.

1. Do not store spare LP cylinder within 10 feet (3m) of this appliance.

2. Do not store or use gasoline or other flammable liquids and vapors within 25 feet (8m) of this appliance.

3. When cooking with oil/grease, do not allow the oil/grease to get

hotter than 350°F (177°C).

4. Do not leave oil/grease unattended.

The Grease Draining Tray and Grease

Receptacle must be visually inspected before each grill use. Remove any grease and wash Grease Draining Tray and Grease Receptacle with a mild soap and

warm water solution. Failure to comply

with these instructions could result in

a grease fire or explosion that could cause serious bodily injury, death or

property damage.

This warranty gives you specific legal rights, and you may have other rights which vary

from state to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 U.S.A.

Grill Installation Codes The installation must conform with local codes or, in

the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or CANICGA- B149.1, Natural Gas and Propane Installation Code.

Failure to comply with these instructions could result in a fire or explosion that could cause

serious bodily injury, death or property damage.

Spiders and small insects can spin webs and nest in the grill Burner Tubes during transit and

warehousing whi, gas flow

obstruction around the Burner Tub_ )K FIRE" can an unsafe o

To redu you must

initial u )nth in summer active

in your used

for an

1. Remove the Burner using a Phillip_

2. Carefully lift each Burner up and away from the Gas Valve Orifice.

3. Check and clean Burner/Venturi Tubes for insects

and insect nests. A clogged tube can lead to a fire beneath the grill.

4. Refer to the figure below and perform one of

these 3 cleaning methods:

[] METHOD 1: Bend a stiff wire or wire coat

hanger into a small hook as shown and run

the hook through the Burner Tube and inside the Burner several times to remove debris.

TO CLEAN BURNER TUBE, L,,m _

INSERT HOOK HERE

BumerTube

LPG grill models must be used with Liquid

Propane Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert the

grill from one fuel type to another is extremely hazardous and will void the warranty.

Never use your gas grill in a garage, porch, shed, breezeway or any other enclosed area.

Never obstruct the flow of ventilation air around your gas grill housing.

Never disconnect the gas regulator or any gas fitting while your grill is lit. A lit grill can ignite leaking gas and cause a fire or explosion which could result in property damage, personal injury

or death.

Keep gas regulator hose away from hot grill surfaces and dripping grease. Avoid

unnecessary twisting of hose. Visually inspect hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call

Sears at 1-800-4-MY-HOME ® (1-800-469-4663) for a Sears replacement hose.

PRE-ASSEMBLY

Read and perform the following pre-assembly instruc- tions:

[] Tools Required for Assembly include:

• protective work gloves

• protective eyewear

• #3 Phillips Head Screwdriver (included in hardware pack in Parts Box)

[] METHOD 2: Use a bottle brush with a flexible

handle and run the brush through the Burner

Tube and inside the Burner several times to

remove any debris.

[] METHOD 3: Use an air hose to force air

through each Burner Tube. The forced air

should pass debris or obstructions through

the Burner and out the Ports.

For safe operation ensure the Gas Valve Assem-

bly Orifice is inside the Burner Tube before

using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may

cause explosion and/or fire resulting in serious bodily injury and/or property damage.

_ uuuuuuuuuuuuuuuuuu[

Gas Valve Assembly \ Orifice BurnerTube

[] You will need assistance from another person to

handle the grill head and other large, heavy parts.

[] Open Lid of shipping carton and remove parts box

and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

[] Slice all four corners with a utility knife to lay open

the carton. This allows you to remove the grill head

and components packed inside.

[] Use the Hardware and Part Diagrams to ensure all

items are included and free of damage.

[] Do not assemble or operate the grill if it appears

damaged. If there are damaged or missing parts

when you unpack the shipping box or you have

questions during the assembly process, call the:

Grill Information Center 1-888-317-7642 8am-8pm CST, Monday throuqh Friday

P06001048A Hardware Pack for LPG Model 1 For use in assemblyofLPG Model 16326

Sii2G0408A Phiiiips ..........4 AttachesCaiiReaiPanei SidePanei

$112G04121 Phillips Head Screw 1/4"x3/4" 4 Attaches Door Handle to Door

si i2GSa0eAPhiiiipsHeadSciew3ii ........... ............................................................................

$112M04082 Phillips Head Screw M4x8mm 1 Attaches Lighting Stick to Left Bowl Panel

Si i2G04i9A Phiiiips Head Screw i)41_xi:3i:1611.............4 Attaches Bowiio Caii

S112M04082 Phillips Head Screw M4x8mm 2 Installs Side Burner Gas Valve to Side Burner Frame

S233GC)4572 wing Bolt 1/4;i_:1 lii6" 1 ......

S303G0404D Special Nut 1/4" 1 Secures Gas Tank

Already installed in the Tool Holder Kit

Phillips Head _crew 1/4"xl/2" Qty 4 (LPG Model)

Qty 6 (NG Model) Part # S112G0408A

(Black Painted)

Phillips Head Screw 1/4"x3/4"

Qty. 4

Part # $112G04121

Phillips Head Screw 1/4"xl-3/16"

Qty 4 Part # S112G0419A

(Btack Painted)

Phillips Head Screw 1/4"x3/4"

Qty 10 Part # S112G0412A

(Black Painted)

Phillips Head Screw 1/4"x2"

Qty. 12

Part # S112G0432A

(Btack Painted)

Phillips Head Screw M4x8mm Qty. 3

Part # S112M04082 (Black Painted)

Phillips Head Screw 3/16"x3/8" Qty. 6

Part # S112G0306A (Black Painted)

!////////////////////////////I]

Lighting Stick Special Nut 1/4" Wing Bolt 1/4"x6-11/16" Qty. 1 Qty 1 Qty. 1

Part # P05313023B Part # S303G0404D Part # $233G04572 Scale 1:2 (Black Painted) (Black Painted)

Scale 1:2 Scale 1:2

_ [Hardware already installed in the Tool Holder Kit _

I I

Wrench/No.17 Customized Control Knob for Side Burner Qty. 1 Qty. 1

Part # P05515101L Part # P03426083H * One Battery/AA included in the Hardware Pack.

Scale 1:2 Scale 1:2

I (Black Painted) I [ /

Phillips Head Screw M5xSmm Part # S112M0508A

'A2

A10

All

KEY DESCRIPTION PART # QTY

P0011960AA 1

2 Protective Pad P055180011 4

.....3 TempeM_ie6a_ge ................................................................................................................................................................................ P0066i0flA ...........................i......

4 Name Plate P00410037C 1

12 Bowl Panel, Rear P00725239A 1 13 Bowl Panel, Rear!Upper

P00725639A 1

Burner/Main (NG only)

19 Gas Valve!Manifold Assembly (LPG only)

Gas Valve!Manifold Ass em bly (NG only) Y0060320

20 Decorative Front Cover P07508005A 1

Control Panel (NG only) P02909081G 1

22 Control Knob for Main Burner P03419023H 5

24 Grease TrayTrack, Left P05330006K 1

P02008011A 5

Y0060319 1

......25 ....................#05330007K..............

27 Grease Receptacle P02701087B 1

......56ii62636c

29 Decorative Panel for Side Shelf, Left P07503005A 1

......................30 Tool oider ' .................................. ......................................................................1

......34 _iigSide#aneilCe_.............................................................................................................P6_gi_66gE...................i

..... Side oniyi.....................................................................................................P076iS0i2E .......................................i...................

39 Cart Bracket, Front

Fortherepairorreplacementpartsyouneed:

anytime1-800-4-MY-HOME® (1-800-469-4663)

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts

list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed Important: Use only Sears replacement parts. The use of any part that is not a Sears replacement part

can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.

Install Casters

[] Place the Cart Side Panels on the cardboard

Install the 4 Casters onto the Caster Seats as shown.

(

Wrench/No.17 Customized Qty. 1

Part # P05515101L Scale 1:2

H nstall Cart Side Panels to Cart Bottom Shelf

Phillips Head Screw 1/4"x2" Qty. 8

Part # S112G0432A (Black Painted)

[] Install the left and right Cart Side Panels (parts

are labeled L or R) to Cart Bottom Shelf.

Install Cart Rear Panel

[] Install the Cart Rear Panel between rear cart Legs as shown.

Phillips Head Screw 1/4"xl/2" Qty 4

Part # S112G0408A (Black Painted)

/,/

./'

/'/

H nstall Door Bracket

[] install the Door Bracket in the up position (part is labeled UP

to ensure proper assembly) between front Cart Legs as shown.

Phillips Head Screw 1t4"x2" Qty. 4

Part # S112G0432A (Black Painted)

+ 21 hidden pages

Kenmore 14117326 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual