Kenmore 141.16737900, 141.16730900 Owner's Manual

Use and Care Guide

E L I T E

_®

End Panel Module Model 141.16730900

• Safety

• Assembly

• Use and Care

Serving Cart Module

Model 141.16732900

Outdoor Refrigerator Module Outdoor Sink Module Model 141.16736900 Model 141.16737900

Note: All modules are sold separately.

Call us first if you have any problem with this product. We can help you with ques- tions about assembly and operation or if there are damaged or missing parts when you unpack this unit from the shipping box.

Please call before contacting your local

retailer.

1-888-317-7642

8am-8pm CST, Monday throu.qh Friday

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA www.sears.com

NOTE TO ASSEMBLER/INSTALLER:

Leave this guide with the consumer. NOTE TO CONSUMER:

Keep this guide for future reference.

• RECORD YOUR SERIAL #

(see silver CSA/serial label onmain bodyof module)

Guide # P80174008L - Date:2009/01/21

Primary Safety Warnings ............................... 2

Warranty Terms and Conditions ................... 2

Pre-Assembly Instructions ............................... 2

Part Diagrams and Lists ........................... 3-6

Assembly Instructions ................................. 7-11

Use and Care Instructions ......................... 12-13

Cleaning and Maintenance ...................... 13-14

Repair Protection Agreements ...................... 15

Kenmore Elite Full Warranty If the module fails due to a defect in material or

workmanship within two years from the date of

purchase, call 1-800-4-MY-HOME'to arrange for

free repair (or replacement if repair proves im-

possible). Limited Warranty on Selected Parts

For three years from the date of purchase, any stainless or painted steel part will be replaced free of charge if it rusts through. After the second year

from the date of purchase you must pay the labor

cost to have it installed.

All warranty coverage excludes part paint loss or

rusting (except for rust-through as specified above),

which are either expendable parts that can wear

out from normal use in less than a year, or are conditions that can be the result of normal use,

accident or improper maintenance.

To expedite the assembly process follow these

general guidelines:

[] Tools Required forAssembly :

• protective work gloves

[]

For your safety, obtain assistance from another person

when assembling this product.

[]

Use the Part Diagrams to ensure all items are included

and free of damage.

[]

Do not assemble or operate the module if they appear damaged. If there are damaged or missing parts when you unpack the shipping box or you have questions dur-

ing the assembly process, call the:

Grill Information Center 1-888-317-7642

8am-8pm CST, Monday throuqh Friday

California Proposition 65 Warning

The Outdoor Sink Module is provided with a Faucet

Assembly. You can have the faucet plumbed directly to your homes inside water supply line (supplies not

included) so your outdoor sink can be used for washing

food and dishes. However, if you elect to attach a

garden hose to your Faucet Assembly, be aware that in some U.S. States water supplied through a garden

hose is regarded to be unfit for human consumption.

All warranty coverage is void if the module is ever

used for commercial or rental purposes.

All warranty coverage applies only if the product

is used in the United States.

This warranty gives you specific legal rights, and you may have other rights which vary from state

to state.

Sears, Roebuck and Co., Hoffman Estates, IL

When using electrical appliances, basic safety

precautions should always be used.

This appliance, when installed, must be electri- cally grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the

Canadian Electrical Code, CSA C22. 1.

• Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.

5-.

" " " -4

-3

KEY DESCRI PTION 16730900 PART# QTY

1 Cart Panel, Top P07801072A 1

2 Cart Panel, Front P07621016D 1 3 Cart Panel, Frame P03344017D 2

4 Cart Panel, Rear P07702104M 1 5 Cart Panel, Left P07619003D 1

6 Decorative Bracket P03344018D 3 7 Level Adjuster P05322004A 4

Cover P07005011B 1 Wrench (Packed with the 16655900 Use and Care Guide) P05515017L 1

Use and Care Guide P80174008L 1

For the repair or replacement parts you need:

Calla rre 1-800-4-MY-HOME® (1-800-469-4663)

To obtain the correct replacement parts for your module, please refer to the part numbers in this parts

list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number

2. Part Number

3. Part Description

4. Quantity of parts needed

Important: Use only Kenmore replacement parts. The use of any part that is not a Kenmore replacement part can be dangerous and will also void your product warranty. Keep this use and care guide for convenient referral

and for part replacement.

13a

® ........i2 15........._ _9

%'_16 _14a

_12

KEY DESCRI PTION 16732900 PART# QTY

1 Cart Panel, Top P07801073A 1 2 Cart Panel, Left/Right P07622001D 2 3 Cart Frame,Front P03344019D 1

4 Cart Frame, Rear P03344024D 1 5 Cart Frame Bracket P03303104D 2

6 Cart Panel, Front P07621017D 1 7 Level Adjuster P05322004A 4

8 Serving Cart Panel P07801074A 1 9 Serving Cart Panel Bracket, Left/Right P03327072D 2

10 Serving Cart Panel Bracket, Rear P03327071D 1 11 Serving Cart Leg Assembly P03334005D 2

12 End Cap P04523001A 4 13 Caster P05112002A 2

13a Caster/Rear P05112011A 2

14 Serving Cart Shelf, Upper P07512016B 1

14a Serving Cart Shelf, Lower P07512017B 1

15 Cart Handle Bracket P03303103D 2 16 Service Cart Handle P00212006A 1

17 Protective Pad, Left P055180193 1 18 Protective Pad, Right P055180203 1

Cover P07005009B 1 Wrench (Packed with the 16655900 Use and Care Guide) P05515017L 1

Use and Care Guide P80174008L 1

2 _

KEY DESCRI PTION 16736900 PART# QTY

1 Cart Panel, Top P07801075A 1 2 Cart Panel, Front P07621017D 1

3 Cart Frame, Front P03344019D 1

3a Cart Frame, Rear P03344023D 1

4 Cart Panel, Left/Right P07622001D 2 5 Cart Panel, Rear P07702105M 1 6 Trim Plate P07524001Q 1

7 Refrigerator Bracket, Left P03311032D 1 8 Refrigerator Bracket, Right P03311033D 1

9 Refrigerator Bracket, Rear P03311037D 1

10 Level Adjuster P05322004A 4 11 Refrigerator P05335022B 1

Cover P07005008B 1 Wrench (Packed with the 16655900 Use and Care Guide) P05515017L 1

Use and Care Guide P80174008L 1

7 \-4

11\

10\\\

KEY DESCRI PTION 16737900 PART# QTY

1 Faucet Assembly P05513050M 1 2 Sink Frame P07801076A 1

3 Sink P0071342BC 1 4 Drain Assembly P05512090M 1

5 Drain Pipe P055120913 1 6 Cart Frame, Front P03344019D 1

6a Cart Frame, Rear P03344023D 1

7 Cart Panel, Front P07621017D 1 8 Cart Panel, Left/Right P07622001D 2

9 Door Trim Plate P07510003H 1

10 Door P04301043J 1

10a Door Bracket, Inner P03303128D 1

11 Door Handle P00213030M 1 12 Cart Panel, Rear P07702106M 1

13 Slide Set Bracket P03311034D 2 14 Cart Basket P05203007G 1 15 Slide Set P05516013C 1 16 Cart Basket Bottom P01001053L 1 17 L Bracket, Left P03301062C 1

18 L Bracket, Right P03301063C 1

19 Door Bracket, Left P033270694 1 20 Door Bracket, Right P033270704 1 21 Level Adjuster P05322004A 4

22 Sink Bracket, Left P03327079D 1 23 Sink Bracket, Right P03327080D 1 24 Pipe Bracket P05512016G 1

Cover P07005010B 1 Wrench (Packed with the 16655900 Use and Care Guide) P05515017L 1

Use and Care Guide P80174008L 1

To Level End Panel Module

[] Remove all packing materials. [] Level Adjusters are located on the underside of the Module as shown.

[] Adjust the 4 preassembted Level Adjusters using the wrench provided.

- Turning adjusters clockwise raises the height.

- Turning adjusters counterclockwise lowers the height. IMPORTANT: For illustration purpose the Module is shown on a tilted angle. FOR YOUR SAFETY-

DO NOT TILT your Module at any time. Top, Panel

j...... j_

- / \\\,

Wrench Qty.1

Part # P05515017L (The wrench is not provided, please find it from

16655900 grill pack)

DO NOT lift Module from the Top Panel when moving or assembling the unit.

Note: This Module is pre-assembted for use as a Left End Panel. Ifnecessary,

you can change it to the Right End Panel following these steps:

How to change the Left End Panel to a Right End Panel

[] Detach the Top Panel and Rear Cart Panel by removing the 4 Fiat Screws 1/4"x3/8" from each panel. [] Detach the Front Cart Panel and Left Cart Panel by removing the 6 Fiat Screws 1/4"x3/8" from each panel.

[] With the assistance of another person, turn the steel frame around so the 2 support brackets face the grill island or

modulethatwilIsitadjacent to this Right End Panel. See Figure.

[] Turn the Front Cart Panel and Rear Cart Panels upside down and re-assemble them to the steel frame using the

previously removed screws.

[] Turn the Left Cart Panel upside down and re-assemble it to the steel frame using the previously removed screws. [] Attach the Top Panel to the steel frame. Be sure the flat edge is on the left and the rounded corners of the Top Panel

are on the outside. Secure using the 4 previously removed Fiat Screws.

Top Cart Panel

Left Cart

Panel

Rear Cart Panel

Decorative Brackets

Front Cart Panel

Upside '_ Down

/ j/

Level Adjuster _ f Wrench

Upside Down

Tum

Round

Top Cart Panel

When you have finished assembling this module be sure that all screws are tightened for safe

operation of the unit.

Front Panel

Decorative Brackets

Rear Cart Panel

Left Cart Panel

Remove the Support Bar [] Remove all packing materials.

[] Remove the two 3/16"x3/8" Phillips Head Screws

and then remove the Support Bar. Note: the Support Bar is used to reinforce the Cart Frame Assembly during shipping and must be removed to roll out the Serving Cart.

/Top Panel

To Level Serving Cart Module

[]

Level Adjusters are located on the underside of the Module as shown in Fig. 1.

[]

Adjust the 4 preassembted Level Adjusters using the wrench provided.

- Turning adjusters clockwise raises the height.

- Turning adjusters counterclockwise lowers the height. IMPORTANT: For illustration purpose the Module is shown on a tilted angle. FOR YOUR SAFETY-DO NOT TILT your Module at any time.

Wrench Qty. 1

Part # P05515017L (The wrench is not provided, please find it from

16655900 grill pack)

H nstall Cart Handle

[] Unscrew two Philip Head Screw 3/16"x 3/8" and Spring Washer 3/16" from Cart Handle. [] Install the Cart Handle to Cart using Phillips Head Screw 3/16"x3/8" and Spring Washer 3/16".

Support Bar

Fig. 1

\- ......./ Wrench

Level Adjuster

DO NOT lift Module from the Top Panel when moving or assembling the unit.

1_ Install the Serving Cart

[] Push the Serving Cart into the Cart

Frame Assembly as shown.

Cart Frame Assembly

Serving Cart

When you have finished assembling this

module be sure that all screws are tightened for safe operation of the unit.

To Level Refrigerator Module

[] Remove all packing materials. [] Level Adjusters are located on the underside of the Module as shown.

[] Adjust the 4 preassembted Level Adjusters using the wrench provided.

- Turning adjusters clockwise raises the height.

- Turning adjusters counterclockwise lowers the height. IMPORTANT: For illustration purpose the Module is shown on a tilted angle. FOR YOUR SAFETY-DO NOT TILT your Module at any time.

\\\\

Wrench Qty. 1

Part # P05515017L (The wrench is not provided, please

find it from 16655900 grill pack)

/ /

Top Panel

Pull Refrigerator Cord out [] Unscrew Trim Plate from the Rear Cart Panel, then

pull Refrigerator Cord out.

[] Reinstall Trim Plate to Rear Cart Panel. [] Plug Refrigerator Cord into a properly grounded outlet.

Level Adjuster

x\\\\

Wrench

DO NOT lift Module from the Top Panel when moving

or assembling the unit.

When you have finished assembling this module be sure that all screws are tightened for safe

operation of the unit.

Install FaucetAssembly(This assemblyprocessrequires2 people)

[] Remove all packing materials. [] Open Cart Door as shown. (See Fig. 1). [] Remove Faucet rubber washer and Bracket and insert the Faucet as shown.

From the underside of the Sink Frame, reattach the Faucet washer and Bracket, secure the Bracket.

(See Fig. 2).

[] Apply pipe tape (not provided) on the Faucet pipe inlet. Connect a 5/8" water supply hose, pipe or tube

(not provided) to the Faucet Pipe Inlet and then tighten as shown. (See Fig. 4)

CAUTION: Use a wrench to connect your water source. DO NOT over-tighten the connection or you may damage the copper pipe.

[] Feed the loose end of the preassembted drain pipe through the Rear Cart Panel so the sink drains

outside the cabinet. (See Fig. 3)

[] Feed your 5/8" water supply hose, pipe or tube through the Rear Cart Panel and connect it to an appropriate

water source.

Sink Frame/

top /_,

Fig. 1

Fig. 3

For illustration pur- poses the left cart side panel is not shown.

/ , Use Wrench to tighten

Outlets for Faucet '\

\ (not provided)

and Drain Pipe

i,, /

Bracket ',\ /

\\\\ !

\"... I _ Fig. 2

t _upply hose or tubes_

CAUTION: "-.... ..................... Fig. 4

Avoid breaking the copper tube from the faucet.

Thee California Proposition 65 Warning

outdoor sink module is provided with a Faucet

Assembly. You can have the faucet plumbed directly to your homes inside water supply line (supplies not

included) so your outdoor sink can be used for washing food and dishes. However, if you elect to attach a garden hose to your Faucet Assembly, be aware that in some U.S. States water supplied through a garden

hose is regarded to be unfit for human consumption.

+ 21 hidden pages