Kenmore 141.16688800, 141.16689800 Owner's Manual

Use and Care Guide

LiquidPropaneGas(LPG)Grill Island

Model 141.16688800 & 141.16689800

• Safety

• Assembly

• Use and Care

• Cooking Guide

• Frequently Asked Questions

Call us first if you have any problem with this product. We can help you with ques- tions about assembly and grill operation or if there are damaged or missing parts

when you unpack this unit from the ship-

ping box. Please call before contacting your local retailer.

1- 888-317-7642

8am-8pm CST, Monday throuqh Friday

• NOTE TO ASSEMBLER/INSTALLER: Leave this guide with the consumer.

• NOTETO CONSUMER: Keep this guide for future reference.

• RECORDYOURSERIAL#

(see silver CSA label on main body of grill)

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA www.sears.com

• Failure to comply with these instructions could result in a fire or explosion that could cause

serious bodily injury, death or property damage.

• Whether this grill was assembled by you or

someone else, you must read this entire manual

before using your grill to ensure the grill is properly assembled, installed and maintained.

• Use your grill at least 3 feet away from any

wall or surface. Use your grill at least 3 feet away from combustible objects that can melt or

catch fire such as vinyl or wood siding, fences

and overhangs or sources of ignition including

pilot lights on water heaters and live electrical

appliances.

• THISGASAPPLIANCE ISDESIGNED FOROUT- DOOR USE ONLY.

• Never use your gas grill in a garage, porch,

shed, breezeway or any other enclosed area.

• Never obstruct the flow of ventilation air around your gas grill housing.

• Never disconnect the gas regulator or any gas

fitting while your grill is lit. A lit grill can ignite

leaking gas and cause afire or explosion which

could result inproperty damage, personal injury or death.

Guide # P80136006H - Date:2008/0!/11

Primary Safety Warnings ........................... 1-3

Warranty Terms and Conditions .................. 2

Pre-Assembly Instructions ............................. 3

Part Diagrams and Lists ........................ 4-11

Assembly Instructions ............................. 12-14

Use & Care Instructions:

• Gas Safety and Leak Tests ............ 15-18

• Lighting Instructions ............................ 19-20

• Troubleshooting ......................................... 20

• Rotisserie Instruction ........................... 21-23

• Refrigerator Instruction ............................. 24

• Cleaning and Maintenance ................ 25-27

• Cooking Guide ................................... A1-A5

• Frequently Asked Questions ............ A7-A8

Kenmore Elite Full Warranty

If this grill fails due to a defect in material or

workmanship within two years fro,.qnthe date of purchase, call 1-800-4-MY-HOME"_to arrange for

free repair (or replacement if repair proves impossible).

Limited Warranty on Stainless Steel Burners

Any stainless steel burner that ever rusts through will be replaced free of charge. After the second year from the date of purchase you must pay the labor cost to have it installed.

Limited Warranty on Selected Grill Parts

For three years from the date of purchase, any

stainless or painted steel part will be replaced free of charge if it rusts through. After the

second year from the date of purchase you must pay the labor cost to have itinstalled.

If you smell gas:

1. Shut off gas to the appliance. 2 Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call

your gas supplier or your fire

department.

LPG models must be used with Liquid

Propane Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert the grill from one fuel type to another is hazardous and must be performed by a qualified gas technician only, using a NG

Conversion Kit ,_urchased from Sears at 1- 800-4-MY-HOME _.

Keep gas regulator hose away from hot grill surfaces and dripping grease. Avoid unneces- sary twisting of hose. Visually inspect hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call Sears at 1-888-317-7642 for a certified replacement

hose.

California Proposition 65 Combustion byproducts produced when using this product contain chemicals known to the State of California to cause cancer, birth de- fects, orother reproductive harm.

All warranty coverage excludes ignitor batteries and grill part paint loss or rusting (except for rust-through as specified above), which are either expendable parts that can wear out from normal use in less than a year, or are conditions that

can be the result of normal use, accident or improper maintenance.

All warranty coverage is void if this grill is ever used for commercial or rental purposes.

All warranty coverage applies only if this grill is used in the United States.

This warranty gives you specific legal rights, and you may have other rights which vary from

sate to state.

Sears, Roebuck and Co., Hoffman Estates, IL

Brass components on the grill, such as hose fittings, propane cylinder valves (sold sepa- rately) and burner valve stems, contain lead

which is known to the State of California to cause cancer, birth defects, or other reproduc-

tive harm.

Never use charcoal or lighter fluid in this gas grill. Failure to comply with these instructions could result in a grease fire or explosion that could cause serious bodily injury, death or property damage.

The Grease Draining Tray and Grease Recep- tacle must bevisually inspected before each

grill use. Remove any grease andwash Grease

Draining Tray and Grease Receptacle with a mild soap and warm water solution. Failure to

comply with these instructions could re- sult in a grease fire or explosion that could

cause serious bodily injury, death orprop- erty damage.

Failure to comply with these instructions may result in a hazardous situation which, if not

avoided, may result in injury.

Spiders and small insects can spin webs and nest in the grill BL transit and

warehousing as flow obstruction around the

Burner FIRE" can caus ate an unsafe

To expedite the assembly process follow these general guidelines:

[] Tools Required forAssembly :

• protective work gloves

• Phillips Head Screwdriver

[] You will need assistance from another person to

handle this grill and island.

[]

This grill island is shipped in two cartons. You will need both cartons to complete assembly.

[]

Use the Hardware and Part Diagrams to ensure all items are included and free of damage.

as folh o this at least _11or

whenever and if your grill ha

period of time

1. Remove the the rear of each Main Burner using a Phillips Head Screwdriver.

2. Carefully lift each Burner up and away from the Gas Valve Orifice.

3. Check and clean Burner/Venturi Tubes for insects and insect nests. A clogged tube can

lead to a fire beneath the grill.

4. Refer to the figure below and perform one of

these 3 cleaning methods:

[] METHOD 1: Bend a stiff wire or wire coat

hanger into a small hook as shown and run the hook through the Burner Tube and inside

the Burner several times to remove debris.

TO CLEAN BURNER TUBE, INSERT HOOK

HERE Burner Port

Foot

• ................ \o...... z......................

_Burner Tube

[] METHOD 2: Use a bottle brush with a flexible

handle and run the brush through the Burner

Tube and inside the Burner several times to remove any debris.

[] METHOD 3: Use an air hose to force air

through each Burner Tube. The forced air should pass debris or obstructions through

the Burner and out the Ports.

For safe operation ensure the Gas Valve Assem- bly Orifice is inside the Burner Tube before using

your grill. See figure, if the Orifice is not inside the Burner Tube, lighting the Burner may cause

explosion and/or fire resulting in serious bodily injury and/or property damage.

[] Do not assemble or operate the grill if it appears

damaged. If there are damaged or missing parts when you unpack the shipping box or you have questions during the assembly process, call the:

Grill Information Center 1-888-317-7642

8am-8pm CST, Monday throu,qh Friday

Grill Installation Codes The installation must conform with local codes or, in the

absence of local codes, with the National Fuel Gas

Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA58,Natural Gas and Propane Installation Code, CSA B149.1, Propane Storage and Handling Code, B149.2.

Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliances.

An LP cylinder not connected for use shall not be stored in the vicin-

ity of this or any other appliance.

When using electrical appliances, basic

safety precautions should always be used.

• This appliance, when installed, must be electri- cally grounded in accordance with local codes

or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the

Canadian Electrical Code, CSA C22.1.

Gas VaIve AssembIy Orifice

BurnerTube

• Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.

36_

_31

KEY DESCRIPTION PART # QTY

1 Lid Assembly P001472134 1

2 Lid Handle P00205069M 1

2a Lid Handle Heat Insulating Spacer P06801028A 2

3 Protective Pad P055180021 4 4 Name Plate P00410039C 1

5 Temperature Gauge P00601287C 1 6 Temperature Gauge Seat P00614027C 1 7 Cooking Rack / Secondary P01507020G 1

8 Cooking Grid, 6.5" P01604031B 1

9 Cooking Grid, 13" P01604013B 1 10 Cooking Grid / Infl-ared Burner P01615030F 1 11 Heat Diffuser P017080364 3

12 Burner P020080324 3 13 Bowl Assembly P0071339B4 1

14 Grease Draining Plate P069020184 2 15 Heat Diffuser Bracket, Front P033280154 3

16 Heat Diffuser Bracket, Rear P033280174 3 17 Burner Heat Shield P069060454 1

18 Grease Tray Heat Shield, Upper P06903056A 1 19 Bowl Wind Shield P069060754 1

20 Bowl Panel, Rear/Upper P06906021C 1 21 Burner Bracket P0220342DD 1

22 Gas Valve/Manifold Assembly Y0060570 1 23 Connection Hose P037050871 1 24 Electric Wire Set P02615103A 1

25 Gas Collector Box with Electrode P02609010B 3 26 Grease Tray P02706255B 1

27 Grease Tray Heat Shield P06903048B 1 28 Grease Tray Handle P00213012M 1

29 Wheel for Grease Tray P05354002A 2 30 Bowl Support Bracket, Left P01301006K 1 31 Bowl Support Bracket, Right P01302006K 1 32 Control Panel, Upper P0290998FI 1

33 Control Panel P0290999FI 1 34 Electric Ignitor,6-port P02502265C 1

35 Electric Ignitor Protector P05545002A 1 36 Control Knob P03426333J 4

37 Control Knob Spring P05504021A 5 38 Control Knob Seat P03413011J 5

39 Infrared Burner Assembly P020050104 1

40 Drawer Handle P00213020M 1 41 Drawer Panel P019120011 1 42 Drawer P019130011 1

43 Drawer Slide Set P05516132C 2 44 Cart Panel, Front P07621008D 1 45 Cart Panel Frame, Front P03344011D 1

46 Cart Frame P00907014C 2

KEY DESCRIPTION PART# QTY

47 CartPanel,Left P07604018B 1 48 CartPanel,Right P07604019B 1 49 CartPanel,Rear P07604020B 1

50 CartBottomPanelBracket,LF/RR P03305060D 2 51 CartBottomPanelBracket,RF/LR P03305061D 2

52 Regulatorwith Hose P03637001A 1 53 HoseHolder P05536001G 1

54 LightingStick Assembly P05507008A 1 55 RotisserieBurnerAssembly P02007068A 1

56 RotisserieBurnerExtensionTube P03717050B 1 57 RotisserieBurnerElectrode P02614025A 1

58 RotisserieBurnerOrifice P06534005A 1 59 RotisserieBurnerThermocoupteBracket P03328047C 1

60 RotisserieBurnerThermocoupte P05305027A 1 61 ControlKnobforRotisserieBurner P03426343J 1

62 RotisserieBurnerWindShield P06906046B 1 63 InfraredBurnerThermocoupteBracket P033430084 1

64 InfraredBurnerThermocoupte P05305022A 1 65 InfraredBurnerElectrode P02618008B 1

66 LevelAdjuster P05322004A 4 67 GroundWire P02615114D 1

68 ProtectiveCap P055350081 2 69 ElectricWire,5-contact P02615128A 1

70 ElectricWire Set P02616013G 1 71 WireTube P05371001A 1 72 ControlPanelBracket P03303029D 1

Cover P07007048A 1 RotisserieAssembly Y0250147 1

Useand CareGuide P80136006H 1

KEY DESCRIPTION PART# QTY

1 Lid P0015201A4 1

2 LidHingeBracket,Left P033180034 1

3 LidHingeBracket,Right P033180044 1

4 GriddleBurnerBody P0071343D4 1

5 GriddleBurnerBodyBracket P03303105D 2

6 GriddleBurnerFrame P07801070A 1

7 Griddle P05701040E 1

8 Burner/Griddle P020080464 1

9 BowlAssembly P0073540B4 1 10 LightingTube P05507011A 1

11 GrateHandle P05515014E 2 12 Gas CollectorBoxwith ElectricWire P02601006A 1

13 ControlPanelBracket,Left P033040474 1 14 ControlPanelBracket,Right P033040484 1

15 ControlPanel P029056061 1 16 BowlSupportBracket, Left P01304014D 1

17 BowlSupportBracket, Right P01305020D 1

KEY DESCRIPTION PART# QTY

18 BowlSupportBracket,Rear P01319002D 1 19 GreaseTray P02718047B 1

20 GreaseTrayHandle P00213021M 1 21 Wheelfor GreaseTray P05354002A 2 22 GreaseTube P02721042B 1

23 GasValve P03245001G 1 24 ControlKnob P03426353J 1

25 ControlKnobSpring P05504021A 1 26 ControlKnobSeat P03413011J 1

27 CartPanel,Front P07621013D 1 28 CartPanel,Right P07620020D 1

29 CartPanelFrame,Front P03344014D 1 30 CartFrame,Right P03344015D 1

31 CartFrame P03344016D 2 32 CartPanel,Left P07605032P 1

33 CartPanel,Rear P07702093M 1 34 DoorBracket,Bottom P033060314 1

35 DoorBracket,Top P033060324 1 36 DoorHandle P00213022M 1

37 Door P04301042J 1 38 TankTray P01001064D 1

39 DoorMagnetBracket P03301051D 1 40 DoorMagnet P05523005M 2

41 TankHolder P05358002G 1 42 HoseHolder P05536001G 1

43 ExtensionHose,18.5" P03705087K 1 44 LevelAdjuster P05322004A 4

45 Side BurnerConnectionHose P03702034F 1 46 ProtectiveCap P055350081 1

47 ElectricWire, 1-contact P02615129L 1 48 ElectricWire P02616014G 1

49 Gas Fitting P03901036A 1

KEY DESCRIPTION PART # QTY

1 Cart Panel, Top P07801071A 1

2 Cart Panel, Front P07621014D 1

3 Cart Panel Frame, Front P03344014D 1

4 Cart Panel P07620020D 1

5 Cart Panel Frame P03344016D 1

6 Cart Frame P03344015D 2

7 Cart Panel, Right P07606034P 1

8 Cart Panel, Rear P07702094M 1

9 Trim Plate P07524001Q 1 10 Refrigerator Bracket, Left P03311020D 1

11 Refrigerator Bracket, Right P03311021D 1 12 Refrigerator Bracket, Rear P03311022D 1 13 Level Adjuster P05322004A 4

14 Refrigerator P05335021 B 1 15 Refrigerator Door Bracket, Upper P03329014D 1 16 Refrigerator Door Bracket, Lower P03329015D 1 17 Door for Refrigerator P04302048A 1

18 Electric Wire P02615113A 1

To purchase Natural Gas Conversion Parts call Sears at 1-800-4-MY-HOME ®

Natural gas conversion kit Part #Y0440030

Your Island can be converted to natural gas with this natural gas kit and a qualified gas technician only. In order

to convert this grill the tech will need this grill conversion kit.

Natural gas 12' hose Part #P03703001A

If converting the grill and range to use natural gas, in most cases the tech will

need this optional 12' extension hose with 3/8" ID (inner diameter).

For the repair or replacement parts you need:

Call anytime 1-800-4-MY-HOME® (1-800-469-4663)

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts

list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed

Important: Use only Kenmore replacement parts. The use of any part that is not a Kenmore replacement part can be dangerous and will also void your product warranty. Keep this use and care guide for

convenient referral and for part replacement.

KEY DESCRIPTION

1. Rot. Bushing

2. Rot. Thumbscrew 1/4"xl/2"

3. Rot. Collar

4. Rot. Spit

5. Rot. Holding Fork

6. Rot. Motor Bracket

7. Rot. Motor/AC

8. Rot. Screw#10-24x3/4"UNC

9. Rot. Washer

10. Rot. Nut #10-24

Rot. Thumbscrew

1/4"xl/2"

Qty. 3 Part # S196G04084

[ 111111111111111111]

Rot. Screw #10-24x3/4" UNC

Qty. 2 Part # Sl12G10124

PART#

P05508167F S196G04084 P05508168F P05508175F P05508169F P0330701OA P07101045A S112G10124 S411G03084 S362G10124

Rot.Washer Qty. 2

Part # S411G03084

QTY

1 1

1 2 2 2

Rot. Nut.#10-24

Qty. 2

Part # S362G10124

Assemble Island Set

[] Open both cartons and remove all packing materials. [] Open Grill Lid and Refrigerator door and remove packing materials.

[] Align the 3 individual components and slide together

as shown.

[] Be sure to attach the Regulator with Hose to both the

Grill and the Side Bumer before securely placing the island in position. (Please refer to Step 2.)

Note:

All measurements are in inches

Use your grill at least 3 feet away from any wall or surface.

Do not obstruct the flow of air for combustion and ventilation.

DO NOT lift Grill Island units from the table top surfaces when moving or assembling Island set.

Install Regulator with Hose to Grill and Griddle Side Burner

[] Unscrew the Bowl Rear Upper Panel from Bowl Rear Panel (Fig.l) then insert the connection hose through

the hole on the cart right panel of the main grill and then through the hole on the cart left panel of the griddle side grill. (see Fig. 2).

[] insert the electric wire set through the cart left panel of the griddle side grill and then push plug to

the socket of the electric wire, ensure the same color match (Fig. 3).

[] Unscrew the Hose Holder from the Rear Cart Frame.Then fix the hose by Hose Holder onto the Rear

Cart Frame (Fig. 3).

[] Push back Sleeve of the Socket. See Figure A. Insert Plug then release Sleeve. See Figure B. Push Plug until

sleeve snaps forward locking the Plug into the Socket. See Figure C.

[] Complete installation of Regulator with Hose for both Grill and Side Burner Plugs.

Table top surface (_)

Figure A

PLUG_ SOCKET

Figure B _SLEEVE

Figure C

:ig. 1

Red

Green

Plug

Fig. 2

Plug

Red

Green

hose holder

XSLEEVE

Fig. 3

H Adjust Island Assembly Set (on uneven surface position).

[] Level Adjusters are located underside of the Island Assembly as shown.

[] Adjusters are Located on the underside. Adjust the 12 preassembled Level

Adjusters using the wrench provided.

- Turning adjusters clockwise raises the height.

- Turning adjusters counterclockwise lowers the height.

[] IMPORTANT: For illustration purpose the Island Assembly Set is shown

on a tilted angle. FOR YOUR SAFETY DO NOT TILT your Island Assembly at any time.

Wrench Qty. 1

Part # P05515017L

(Already packed in the Use and Care

Guide packaging.)

Pull Refrigerator Cord out. [] Unscrew Trim Plate from the rear of Island set, then pull

Refrigerator Cord out.

[] Reinstall Trim Plate to island set. [] Plug Refrigerator Cord into a properly

grounded outlet.

,Wrench

Level

When you have finished assembling your

grill be sure that all screws are tightened for safe operation of your grill,

Failure to read and follow the Use and Care Instructions could result in a fire or explosion

that could cause serious bodily injury, death or

property damage.

Install Ignitor Battery

[] Unscrew Ignitor Cap from Control Panel. [] Place supplied AA battery into the Ignitor

Slot with positive pole facing you.

[] Position the Cap and Spring over the AA

battery and tighten onto Control Panel.

Ignitor

AA Battery _€<"

Ignitor Cap_

_Spring

With the assistance of another person,

perform this Electrode Check before proceeding.

This test will ensure that the Spark Electrode Tips are properly positioned so your grill lights easily

and properly.

[]

Be sure all Control Knobs are set to "OFF" and open the Grill Lid.

[]

Have your assistant stand behind to the right of the grill and look toward the front of the grill bowl. Never put your face

inside the Grill Head.

[]

Press the ignitor Cap. You should hear a "clicking" sound. Your assistant should see a blue spark within each Gas Collector Box. If a spark is present the Electrode Tips are properly positioned.

[]

If no spark is seen, the Spark Gap needs to be adjusted as follows:

• If the gap between the Spark Elec- trode Tip and Receiver is more than

3/16" use an adjustable wrench to gently squeeze the Gas Collector Box

to narrow gap.

• Recheck the Electrode again, if no "clicking" sound is heard:

- AA Battery may be installed back- wards.

- Electric wires may be loose. Remove the AA Battery and inspect the Ignitor

Junction Box found behind the Control Panel and reconnect any loose wires.

Install Cooking Components

[] Place the Heat Diffusers above the

Burners.

[] Place the Cooking Grids on the ledge

above the Heat Diffuser.

[] Place the Secondary Cooking Rack into

the holes on the upper left and right of the Back Burner frame with the bottom

resting in the slots on either side of the Grill Bowl.

[] Place the Griddle above the Side Burner.

Secondary Cooking Rack

Cooking Grids

Heat

Cooking Grid/infrared Burner

Griddle@

3/16"

_park Gap Gas Collector

Box

ark Electrode Tip

Spark Receiver

CORRECT LP GAS TANK USE

[] LP Gas grill models are designed for use with a

standard 20 lb. Liquid Propane Gas (LP Gas) tank, not included with grill. Never connect your gas grill to

an LP Gas tank that exceeds this capacity. A tank of approximately 12 inches in diameter by 18-1/2 inches

high is the maximum size LP Gas tank to use. You

must use an "OPD" gas tank which offers a listed Overfill Prevention Device. This safety feature

prevents tank from being overfilled which can cause malfunction of LP Gas tank, regulator and/or grill.

[] The LP Gas tank must be constructed and marked

in accordance with the Specifications for LP-Gas

Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/

CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commis-

sion, as applicable.

[] The LP Gas tank must have a shutoff valve,

terminating in an LP Gas supply tank valve outlet, that is compatible with a Type 1 tank connection device. The LP Gas tank must also have a safety

relief device that has a direct connection with the vapor space of the tank.

[] The tank supply system must be arranged for vapor

withdrawal.

[] The LP Gas tank used must have a collar

to protect the tank valve.

[] Never connect an unregulated LP gas tank to your

gas grill. The gas regulator assembly supplied with your gas grill is adjusted to have an outlet pressure of 11" water column (W.C.) for connection to an LP gas tank. Only use the regulator and hose assembly supplied with your gas grill. Replacement regulators and hose assemblies must be those specified by

the Manufacturer.

[] Have your LP Gas dealer check the release valve

after every filling to ensure it remains free of defects. [] Always keep LP Gas tank in upright position. [] Do not subject the LP Gas tank to excessive heat.

[] Never store an LP Gas tank indoors. If you store

your gas grill in the garage always disconnect the LP Gas tank first and store it safely outside.

[] LP Gas tanks must be stored outdoors in a well-

ventilated area and out of the reach of children.

[] Disconnected LP Gas tanks must not be stored in a

building, garage or any other enclosed area.

[] The regulator and hose assembly can be seen after

opening the doors (if applicable) and must be inspected before each use of the grill. If there is excessive abrasion or wear or if the hose is cut, it must be replaced prior to using the grill again.

[] Any attempt to convert the grill from one fuel type

to another is extremely hazardous and must be

performed by a qualified gas technician only, using

a NG Conversion Kit purchased from Sears. [] Never light your gas grill with the lid closed or

before checking to ensure the burner tubes are fully

seated over the gas valve orifices.

[] Never allow children to operate your grill. Do

not allow children or pets to play near your grill.

[] Use of alcohol, prescription or non-prescription

drugs can impair your ability to properly assemble and safely operate your grill.

[] Keep fire extinguisher readily accessible. In the

event of a oil/grease fire, do not attempt to extinguish with water. Use type B extinguisher or smother with dirt, sand or baking soda.

[] In the event of rain, cover the grill and turn off

the burner and gas supply.

[] Use your grill on a level, stable surface in an

area clear of combustible materials.

[] Do not leave grill unattended when in use. [] Do not move the appliance when in use. [] Allow the grill to cool before moving or storing. [] Do not use your grill as a heater.

[] This grill is not intended to be installed in

or on recreational vehicles and/or boats.

[] The grill is not intended for commercial use. [] Never use charcoal in this gas grill.

A. Do not store a spare LP-Gas tank under or near

this appliance. B. Never fill the tank beyond 80 percent full; and C. If the information in "(a)" and "(b)" is not followed

exactly, a fire causing death or serious injury may

occur.

• Use your grill at least 3 feet away from any wall or surface. Use your grill at least 3 feet

away from combustible objects that can melt or catch fire such as vinyl or wood siding,

fences and overhangs or sources of ignition including pilot lights on water heaters and live electrical appliances.

• Outdoor cooking gas appliance shall not be used under overhead combustible construction.

• Never use your gas grill in a garage, porch, shed, breezeway or any other enclosed area.

• Never obstruct the flow of ventilation air around your gas grill housing.

• In windy conditions, always position the front of grill to face oncoming wind to reduce smoke and heat blowing in your face and prevent potential hazards to self and grill.

NOTE about LP Gas Tank Exchange Programs

• Many retailers that sell grills offer you the option of replacing your empty LP Gas tank through an ex- change service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your tank only for an OPD safety feature-equipped tank as described in the LP Gas tank section of this guide.

• Always keep new and exchanged LP Gas tanks in an upright position during use, transit or storage.

• Leak test new and exchanged LP Gas tanks BEFORE connecting one to your grill.

How to Leak Test your LP Gas Tank For you rsafety:

• All leak tests must be repeated each time your LP Gas tank is exchanged or refilled.

• When checking for gas leaks do not smoke.

• Do not use an open flame to check for gas leaks. Your grill must be leak tested outdoors in a well-

ventilated area, away from ignition sources such as gas fired or electrical appliances. During the leak test,

keep your grill away from open flames or sparks. Do not use household cleaning agents. Damage to

gas assembly components can result.

LP Gas Model only:

Secure a 201b LP Gas Tank to Gas Grill

[] Turn your LP Gas Tank Valve clockwise to the

closed or OFF positon.

[] Open the door and unscrew the Wing Bolt from

right bracket of tank holder.

[] Place LP Gas tank into tank holder. Be sure

bottom of tank fully rests in cutout in bottom shelf.

[] install the tank so the Tank Valve faces the rear

right corner of cabinet.

[] Align and screw the Wing Bolt into right bracket

of tank holder to secure the gas tank. Attach the Regulator with Hose to the gas tank.

[] Use a clean paintbrush and a 50/50 mild soap and

water solution.

[] Brush soapy solution onto LP Gas tank in the

areas indicated by the arrows. See diagram.

[] If growing bubbles appear do not use or move the

LP Gas tank. Call an LP Gas Supplier or your Fire Department.

One Nut is fixed to Tank Holder. An

additional Nut and _ J

Bolt is secured_Wing

AFTER inserting tank

into tank hole.

Tank Holder

I//////////_

Wing Bolt 1/4"xl/2" Qty. 2

Part # S233G0408A

(Already installed on the Tank Holder.)

Additional Nut

Tank tray

If growing bubbles appear do not use or move

the LP Gas tank. Contact an LP Gas Supplier or your fire department!

LP Gas Model only: Connect Regulator with Hose to your LPG Tank

[] Turn all Burner Valves to the OFF position. [] Inspect the valve connection port and regulator as-

sembly for damage or debris. Remove any debris. Never use damaged or plugged equipment.

[] Connect the regulator assembly to the tank valve and

HAND TIGHTEN nut clockwise to a full stop. DO NOT use a wrench to tighten because it could damage

the Quick Coupling Nut and result in a hazardous

condition.

[] Open the tank valve 1/4 to 1/2 (counterclockwise) and

use a soapy water solution to check all connections

for leaks before attempting to light your grill. See

"Checking for LP Gas Leaks". If a leak is found,

turn the tank valve off and do not use your grill until

the leak is repaired.

Type 1 connection per ANSI Z21.58b-2007/CSA

1.6A-2007 Quick

CAUTION: When the appliance is not in use the gas

must be turned off at the tank. Place dust cap on

cylinder valve outlet whenever the cylinder is not in

use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage

of propane.

Grill

Gas Valve/Manifold

Regulator with Hose

(LPG)

LP Gas Tank

Disconnecting A Liquid Propane Gas (LPG) Tank From Your Grill

[] Make sure the Burner Valves and LP Gas tank

valve are off. (Turn clockwise to close.)

[] Detach the hose and regulator assembly from

the LP Gas tank valve by turning the Quick Coupling Nut counterclockwise.

Check all connections for LP Gas Leaks

Never test for leaks with a flame. Prior to first use, at the beginning of each season, or every time your LP Gas tank is changed, you must check for gas leaks. Follow these three steps:

[] Make a soap solution by mixing one part liquid

detergent and one part water.

[] Turn the grill Control Knobs to the full OFF

position, then turn the gas ON at source.

[] Apply the soap solution to all gas connections

indicated by the arrows. See diagram. If bubbles appear in the soap solution the connections are not properly sealed. Check each fitting and tighten or repair as necessary.

1. Do not store spare LP cylinder within 10 feet (3m) of this appliance.

2. Do not store or use gasoline or

other flammable liquids and vapors within 25 feet (8m) of this appliance.

3. When cooking with oil/grease, do not allow the oil/grease to get

hotter 350°F (177°C)

4. Do not leave oil/grease unattended.

Check that the end of each Burner Tube is properly located over each Valve Orifice

1. Remove the Drawer and the Grease Draining Tray.

Angle to view orifice and

adjust air shutter

Push LEVER down on right side and up

on left side to unlock

Air

shutter

View from under the grill head

If you have a gas leak that cannot be repaired by

tightening, turn off the gas at the source, disconnect fuel line from your grill and call 1-888-317-7642

or your gas supplier for repair assistance. Never disconnect the gas regulator or any gas

fitting while your grill is lit. A lit grill can ignite

leaking gas and cause a fire or explosion which could result in property damage, personal injury

or death.

Grill Lighting Instructions

1. Before each use, check all hoses for cracks, nicks, cuts, burns or abrasions. If a hose is damaged in any way, do not use your grill before replacing the hose with an authorized part from the Parts List. Also make sure all

gas supply connections are securely tightened.

2. Familiarize yourself with the safety and Use and Care instructions in this guide. Do not smoke while lighting

grill or checking gas supply connections.

3. Be sure the LP Gas tank is filled.

4. Open the Grill Lid.

Failure to replace a faulty hose, secure gas supply connections or to open the Lid before proceeding to the Lighting Procedures could result in a fire or explosion that could cause serious bodily injury,

death, or property damage.

5. Set Control Knobs to OFF and open the LP Gas tank valve SLOWLY 1/4 of a turn.

I Open LP Gas tank _''X

OFF

6. Push and turn Burner Control Knob to _, and you will hear

a clicking sound as the burner is being ignited. Once the burner is lit, turn the knob back to Hi.

Low_

OFF

7. If ignition does not occur in 5 seconds, turn gas off at source and turn Control Knobs OFF. Wait at least 5

minutes for gas to clear, then retry. If your grill still fails to light turn the burner Control Knob(s) and gas source OFF and conduct a leak test of ALL gas connections and gas sources as explained in the LP Gas Tank

installation of this guide. If no leaks are detected, wait 5 minutes for any gas to clear and repeat the lighting procedure.

8. After one Burner is lit, turn the tank valve SLOWLY one more 1/4 of a turn.

9. Turn Knob for each other burner and light as you move toward the fuel source.

Burner Control Knobs on Control Panel

Grill

® ® ®o®®

\. I z i i

Main Burner Rotisserie Infrared

Burner Burner

Rotisserie Burner Lighting Instructions

1. Follow steps 1 through 5 of the Grill Lighting Instructions.

2. Push and turn Burner Control Knob to _: and hold knob in.

3. Keep pressing while you turn knob to Hi and hold in 5 - 10 seconds before releasing.

4. If ignition does not occur in 5 seconds, turn gas off at source and turn Control Knobs OFF. Wait at least

5 minutes for gas to clear, then retry. If your grill still

fails to light turn the Control Knob(s) and gas

source OFF and conduct a leak test as explained in the LP Gas Tank installation of this guide. If no leaks are detected, wait 5 minutes for any gas to clear and repeat the lighting procedure.

5. After Burner is lit, turn the tank valve SLOWLY one more 1/4.

IMPORTANT: Do not use the Rotisserie Burner and Main Burners at the same time. Rotisserie burner is for Rotis-

serie Cooking only.

ROTISSERIE BURNER KNOB:

OFF

Infrared Burner Lighting Instructions

1. Follow steps 1 through 5 of the Grill Lighting Instructions.

2. Push and turn Burner Control Knob to _€ and hold knob in.

3. Keep pressing while you turn knob to Hi and hold in 5 - 10 seconds before releasing.

4. If ignition does not occur in 5 seconds, turn gas off at source and turn Control Knobs OFF. Wait at least

5 minutes for gas to clear, then retry. If your grill still fails to light turn the Control Knob(s) and gas source OFF and conduct a leak test as explained in the LP Gas Tank Installation of this guide. If no leaks are detected, wait 5 minutes for any gas to clear and repeat the lighting procedure.

5. After Burner is lit, turn the tank valve SLOWLY one more 1/4 of a turn.

Griddle Burner Lighting Instructions

1. Follow steps 1 through 3 of the Grill Lighting Instructions.

2. Open the Griddle Side Burner Lid.

3. Set Control Knobs to OFF and open the LP Gas

tank valve SLOWLY 1/4 of a turn.

4. Push and turn Burner Control Knob to _€and you will hear a clicking sound as the burner is being

ignited. Once the burner is lit, tum the knob back to Hi.

5. If ignition does not occur in 5 seconds, turn gas off at source and turn Control Knobs OFF. Wait at least

5 minutes for gas to clear, then retry. If your grill still fails to light turn the Control Knob(s) and gas source OFF and conduct a leak test as explained in the LP Gas Tank installation of this guide. If no

leaks are detected, wait 5 minutes for any gas to

clear and repeat the lighting procedure.

6. After Burner is lit, turn the tank valve SLOWLY one

more 1/4 of a turn.

INFRARED BURNER GRIDDLE BURNER KNOB: KNOB:

I I

kow_

OFF OFF

Manually Lighting Your Grill By Paper Match

To light your gas grill by match, insert a match into the Lighting Stick and follow steps 1 through 5 of the Grill Lighting instructions. Then, light the match and place Lighting Stick through the Cooking Grid on the grill as

shown below. Turn the nearest Control Knob to the Hi setting to release gas. The Burner should light immedi-

ately.

Match

_ighLighting

Stick

(Note:the Lighting Stick is placed in the

drawer.)

Never lean over the grill cooking area while lighting your gas grill. Keep your face and body a safe distance (at least 18 inches) from the front of grill when lighting your grill by match.

Should a FLASHBACK fire occur in or around the Burner Tubes, follow the instructions below.

Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death, or property damage.

• Shut off gas supply to the gas grill.

• Turn the Control Knobs to OFF position.

• Open the Grill Lid.

• Put out any flame with a Class B fire

extinguisher.

• Once the grill has cooled down, clean the Burner Tubes and Burners according to the cleaning instructions in this Use

and Care Guide.

Troubleshooting

If the grill fails to light :

1. Turn gas off at source and turn Control Knobs to OFF. Wait at least 5 minutes for gas to clear, then retry.

2. If your grill still fails to light, check gas supply and connections.

3. Repeat lighting procedure. If your grill still fails to operate, turn the gas off at source, turn the Control

Knobs to OFF, then check the following:

[] Misalignment of Burner Tubes over Orifices

Correction: Reposition Burner Tubes over Orifices.

[] Obstruction in gas line

Correction: Remove fuel line from grill. Do not smoke! Open gas supply for one second to clear any obstruction from fuel line. Close off gas supply at source and recon- nect fuel line to grill.

[] Plugged Orifice

Correction: Remove Burners from grill by removing the screw from the rear of each Burner using Phillips Head Screwdriver. Carefully lift each Burner up and away from

gas valve Orifice. Remove the Orifice from gas valve and gently clear any obstruction with a fine wire. Then

reinstall all Orifices, Burners, screws and cooking components.

[] If an obstruction is suspected in Gas Valves or Manifold,

call the Grill Information Center 1-888-317-7642 8am to 8pm CST, Monday through Friday.

FqObstruction in Burner Tubes

Correction: Follow the Burner Tube cleaning procedure on page 27 of this Use and Care Guide.

[] Misalignment of Ignitor on Burner

Correction: Check for proper position of the Electrode Tip as shown in step 6 page 14. The gap between the Spark Electrode Tip and Spark Receiver should be approximately 3/16". Adjust if necessary. With the gas supply closed, turn any Main Burner Control Knob to

J/, then push in and watch for the presence of a spark at

the Electrode.

[] Disconnected Electric Wires

Correction: Inspect the ignitor Junction Box found behind the Control Panel. Connect loose Electric wires to

Junction Box and try to light the grill.

[] Weak AA battery

Correction: Unscrew the ignitor Cap and replace the battery.

[] If the grill still does not light you may need to purge

air from the gas line or reset the regulator excess gas flow device. Note: This procedure should be done every time a new LP Gas tank is connected to your grill.

To purge air from your gas line and/or reset

the regulator excess gas flow device:

[] Turn Control Knobs to the OFF position.

[] Turn off the gas at the tank valve.

[] Disconnect regulator from LP Gas tank.

[] Let unit stand 5 minutes to allow air to purge.

[] Reconnect regulator to the LP Gas tank. [] Turn tank valve on SLOWLY 1/4 of a turn.

If ignition does not occur in 5 seconds, turn the Control Knob(s) and gas source OFF and conduct a leak test as explained in the Use and Care section of this guide.

If no leaks are detected, wait 5 minutes for any gas to clear and repeat the lighting procedure.

[]

Open the Grill Lid.

[]

Push and turn the Left Main Burner Control Knob to _,.

[] Press Electric ignitor for 3-4 seconds to light

the burners.

CORRECT ROTISSERIE USE

Read all instructions before initial use. IMPORTANT: When using electrical appliances, basic

safety precautions should always be used.

The Rotisserie Motor is set for 120V, 60Hz AC current.

The Rotisserie is for outdoor use only.

Do not let children operate or play nearby your grill or Rotisserie.

Connecting Rotisserie

Always attach the assembled Rotisserie to your grill first and then plug the Cord into a properly grounded outlet.

Operating Rotisserie Do not operate the Rotisserie if the cord or plug be- comes damaged, or if the Rotisserie malfunctions or has been damaged in any manner.

The use of accessory attachments is not recommeded by the manufacturer and may cause injuries. Only use

this Rotisserie for its intended use.

Do not immerse Electrical Cord, Plug or Motor in water or expose to rain, as this may result in an electrical

shock.

Disconnect Rotisserie

Be careful as all surfaces will be hot, both grill and Rotisserie parts. Use protective mitts to handle the

Rotisserie.

Unplug the Rotisserie from electrical outlet when not in use and before cleaning. Allow to cool before adding or removing parts.

When Roitsserie cooking place a Cooking Pan under the food to be cooked as this will capture the drippings and keep your grill clean of excess grease which could

cause a fire. CAUTION: Handle with care when moving a Cooking

Pan with hot oils

Should a grease fire occur, turn the burners and gas off and leave the grill lid Closed until the fire is out.

Store the Rotisserie indoors

When Rotisserie is not in use, store it indoors in a dry place.

To protect against electrical shock, do not immerse electrical cord, plugs or motor in water or expose to rain. Protect electrical elements from burners, hot grill surfaces and grease.

To protect against shock hazard risk, connect only to properly Grounded Outlet.

ELECTRICAL EQUIPMENT USE

To protect against electric shock, do not immerse cord or plugs in water or other liquid.

Unplug from the outlet when not in use and before cleaning. Allowto cool before putting on ortaking off parts.

3. Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance

malfunctions or has been damaged in any manner. Contact the manufacturer for repair.

4. Do not let the cord hang over the edge of a table or touch hot surfaces.

5. Do not use an outdoor cooking gas appliance for purposes other than intended.

6. When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the

outlet.

7. Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.

Never remove the grounding plug or use with an

adapter of 2 prongs.

Use only extension cords with a 3 prong grounding

plug, rated for the power of the equipment, and approved for outdoor use with a W-A marking.

Remove all components from the carton.

Attach the Motor Bracket on the outside of the right grill bowl panel. Align the two holes of the

Bracket with the holes on the grill bowl. Tighten securely using two Screws #10-24x3/4" UNC, Plain

Washers and Nuts provided.

1111111111111111111

Rot. Screw #10-24x3/4" UNC x2

Rot. Washer x2

Rot. Nut #10-24 x2

Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of the Rotisserie Spit. Adjust spacing between Holding Forks to accommodate your food, then tighten the Thumbscrews

to keep the Holding Forks in position. Slide the Collar and Bushing onto the threaded end of the Spit. Do not tighten the Collar Thumbscrew until the Rotisserie is placed into your grill.

Outside of Left Grill Bowl Panel

Rot. Screw#10-24x3/4" UNC

with washers and nuts

Motor Bracket

Washer

#10-24 Nut

Bushing

Rot.Thumbscrew 1/4"xl/2" x3

Thumbscrew

1/4"x1/2"

Holding Forks Spit

Thumbscrew 1/4"x1/2"

+ 51 hidden pages