Kenmore 141.16327, 141.17327 Owner's Manual

Liquid Propane Gas (LPG) Grill

Model 141.163271

Natural Gas (NG) Grill

Model 141.173271

OPERATOR'S MANUAL

• Safety

• Assembly

• Use and Care

• Cooking Guide

• Frequently Asked Questions

Call us first if you have any problem with this product. We can helpyou with questions about assembly and grill operation or if there are damaged or missing parts when you unpack this unit from the shipping box. Please call before retu rning to the store.

1- 888-317-7642

8am-8pm CST, Monday throu.qh Friday

• NOTE TO ASSEMBLER / INSTALLER: Leave this manual with the consumer.

• NOTETO CONSUMER: Keep this manual for future reference.

• RECORD YOURSERIAL #

(see silver CSA label on main body of grill)

Failure to comply with these instructions could result in a fire or explosion that could cause serious bodily injury, death or property damage.

Whether this grill was assembled by you or someone else, you must read this entire manual before using your grill to ensure the grill is properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

wall or surface. Use your grill at least 3 feet

away from combustible objects that can melt or catch fire (such as vinyl or wood siding, fences and overhangs) or sources of ignition including pilot lights on water heaters and live electrical appliances.

THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY.

Combustion byproducts produced when using this product contain chemicals known to the

State of California to cause cancer, birth defects, or other reproductive harm.

Manuai# P80120002B - Date:2005/01/20

Primary Safety Warnings ........................... 1-3

Warranty Terms and Conditions .................. 2

Pre-Assembly Instructions .............................. 3

Part Diagrams and Lists .......................... 4-7

Assembly Instructions ............................... 8-14

LP Gas Tank Installation ...................... 15-17

Natural Gas Connection .............................. 18

Use & Care Instructions:

• Lighting Instructions ................................. 19

• Troubleshooting .......................................... 20

Cleaning and Maintenance ..................... 21-22

Cooking Guide ........................................ A1-A6

Frequently Asked Questions ................ A7-A8

IF YOU SMELL GAS:

1. Shut off gas to the appliance. 2 Extinguish any open flame.

3. Open lid.

4. If odor continues, keep away from

the appliance and immediately call your gas supplier or your fire

department.

One-Year Full Warranty on Kenmore Grill For one year from the date of purchase Sears will repair this grill if it is defective in material or

workmanship.

If repair proves im possible, Sears will, at your option, either replace this grill with a new one, or refund the full purchase price.

This warranty excludes ignitor batteries and grill paint

loss or rusting, which are either expendable parts that can wear out from normal use in less than a

year, or are conditions that can be the result of

normal use, accident or improper maintenance.

Limited Warranty on Selected Grill Parts

From one year after the date of purchase for the designated time periods listed below,

Sears will replace the following grill parts if they are defective in material or workmanship. You will be charged for labor.

• Lifetime: Tube Burners and Stainless Steel parts (except for discoloration due to normal use or

excessive heat, and scratches or dents caused

by normal use and improper maintenance).

• 2 Years: All Other Grill Parts (except Savor Plates TM, cooking grids and ignitor battery)

Warranty Service Warranty service is available by contacting

Sears at 1-800-4-MY-HOME ®

Warranty Restrictions

• This warranty is void if grill is used for

commercial or rental purposes.

• This grill is safety certified for use only in the country where purchased. Modification for use in any other location is a safety hazard and will void the warranty.

• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA,

Hoffman Estates, IL 60179 U.S.A.

1. Do not store spare LP cylinder within 10 feet (3m) of this appliance.

2. Do not store or use gasoline or other flammable liquids and vapors within 25 feet (8m) of this appliance.

3. When cooking with oil/grease, do not allow the oil/grease to get hotter than 350°F (117°C).

4. Do not leave oil/grease unattended.

LPG grill models must be used with Liquid Propane Gas and the regulator assembly

supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert

the grill from one fuel type to another is extremely hazardous and will void the

warranty. Never use your gas grill in a garage, porch, shed,

breezeway or any other enclosed area. Never obstruct the flow of ventilation air around

your gas grill housing. Keep gas regulator hose away from hot grill

surfaces and dripping grease. Avoid unneces- sary twisting of hose. Visually inspect hose

prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call Sears at 1-800-4-MY-HOME ® (1-800-469-4663) for a Kenmore replacement hose.

Grill Installation Codes The installation must conform with local codes or, in the

absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or CAN/CGA-B149.1, Natural Gas and Propane installation Code.

Failure to comply with these instructions may result in a hazardous situation which, if not

avoided, may result in injury,

Spiders and small insects can spin webs and nest in the grill ing transit and

warehousing flow

obstruction round the Burner T_ FIRE"

can cau_ ate an unsafe €

To .'K

FIRE bes as follc grill.

Also do _ummer

and fall or in your area, and if used for an extended perioc

1. Remove the screw from the rear of each Burner using a Phillips Head Screwdriver.

2. Carefully lift each Burner up and away from the Gas Valve Orifice.

3. Check and clean Burner/Venturi Tubes for insects and insect nests. A clogged tube can lead to a fire

beneath the grill.

4. Refer to the figure below and perform one of

these 3 cleaning methods:

[] METHOD 1: Bend a stiff wire or wire coat

hanger into a small hook as shown and run the hook through the Burner Tube and inside

the Burner several times to remove debris.

TO CLEAN BURNER TUBE, INSERT HOOK HERE

BurnerTube

[] METHOD 2: Use a bottle brush with a flexible

handle and run the brush through the Burner Tube and inside the Burner several times to

remove any debris.

[] METHOD 3: Use an air hose to force air

through each Burner Tube. The forced air should pass debris or obstructions through the

Burner and out the Ports.

For safe operation ensure the Gas Valve Assem- bly Orifice is inside the Burner Tube before using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may cause explosion and/or fire resulting in serious bodily

injury and/or property damage.

Gas Valve Assembly Orifice Burner Tube

PRE-ASSEMBLY

Read and perform the following pre-assembly instructions:

[] Tools Required for Assembly include:

• protective work gloves

• protective eyewear

• #3 Phillips Head Screwdriver (included in hardware pack in Parts Box)

[] You will need assistance from another person to handle

the grill head and other large, heavy parts.

[] Open Lid of shipping carton and remove parts box

and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

[] You may slice the carton front corners with a utility

knife to lay open the carton front panel. This allows you to raise the grill head Lid and remove the compo- nents packed inside, making it easier to lift. Use the sliced off carton front as a work surface to protect floor and grill parts from scratches.

[] Use the Hardware and Part Diagrams to ensure all

items are included and free of damage.

[] Do not assemble or operate the grill if it appears

damaged. Ifthere are damaged or missing parts when you unpack the shipping boxor you have questions during the assembly process, call the: Grill Information Center 1-888-317-7642

8am-8pm CST, Monday throu.qh Friday

PART # PART DESCRIPTION QTY PURPOSE OF PART

PO6001033A HardwarePackforLPGModel 1 For use inassemblyofLPGMode1163271

S112GO408A Phillips Head Screw 1/4','x112" 16 Installs Casters to CartBottom Shelf

Sii2G0432A Phiiiips Head Sciew 1/4 _ .... 8 _aches Ca_Legs with Side Panei tO Caii BoSom St'leif

8112G0408A Phillips Head Screw 1/4"xl/2" 4 Attaches Cart Rear Panel to Cart Legs with Side Panel

8112G0432A Phillips Head Screw 1/4::x2". 4 Attaches Door Bracket to CartLegs with Side Panels

:,,- .................................Attac gg g ac_g Eeg.........................................................................................................................................................

Sl12M04082 Phillips Head Screw M4xSmm 1 Attaches Lighting Stickto LeftBowl Panel

6 hiiiips ........................................" i_iiN _e_uiaio _i_ i 6gdgiggi;i..............................................

66SSi ..................................................................................................................................................................................

Already installed in the Tool Holder Kit

Phillips Head Screw 1/4"xl/2"

Qty 27 (LPG Model) Qty 36 (NG Model)

Part # S112G0408A

(Btack Painted)

Phillips Head Screw 1/4"x3/4" Qty 14

Part # S112G0412A (Btalck Painted)

Lighting Stick Qty 1

Part # P05313023B Scale 1:2

Phillips Head Screw 1/4"xl-3/16" Qty. 4

Part # S112G0419A (Btack Painted)

Phillips Head Screw M4xSmm Qty 1

Part # S112M04082 (Btack Painted)

* One Battery/AA and #3 Phillips Head Screwdriver

included in the Hardware Pack.

Phillips Head Screw 1/4"x2" Qty 12

Part # S112G0432A (Btack Painted)

Phillips Head Screw 3/16"x3/8" Qty 10

Part # S112G0306A (Btack Painted)

Special Nut 1/4" Qty 1 Qty. 1 Ref. # $233G04482

Ref # S303G0404A (Black Painted) (Black Painted) Scale 1:2 Scale 1:2

I- 7

Hardware already installed in the Tool Holder Kit

Wing Bolt 1/4"x6-5/16"

I I I _t_._ I

I (Btack Painted) I L I

Phillips Head Screw M5xSmm Part # S112M0508A

\A2

AI0

KEY DESCRIPTION PART # QTY

.......... ii.......................................................................... i........

12 Bowl Panel, Rear .............................................................................1.................................

15 Burner Bracket

20 Decorative Front Cover P07508005D

P00721281A 1

37 Cart Legs with Side Panel, Left P07617002E 1

......................42 Cart Bracket, Front ......................................................6J .............................................

...................... Plate ..................................................#05540002B ..................................................................................4.......................................

KEY DESCRI PTION PART # QTY

44 Door Guide Plate P05510006A 1 45 Door, Left P04305001E 1

46 Door Magnet P05523002K 4 47 Door Trim Plate P07510003D 2

49 Door, Right P04306001E 1 50 Door Handle

52 Door Hinge Bracket, Top/Right P03313002J 1 53 Door Hinge Bracket, Bottom/Left P03313005J 1 54 Door Hinge Bracket, Bottom!Right P03313003J 1 55 Cart Partition Panel, Left P07512001D 1

................... a ii P artiii k e_ .........................................................................................................................................................................................................................................................................................................................................................................................................................................................................P03303014J 1

57 Cart Partition Panel, Right (NG only) P07512002D 1 58 Cart Partition Panel Bracket, Right (NG only) P03303015J 1

59 Caster, 3 in., with Brake P05119001A 4 60 Regulator with Hose (LPG only) P03631001A 1

61 Hose, 12 ft. (NG only) P03703001A 1

64 Connection Tube (NG only) P03705018A 1 65 Lighting Stick

/_3 Side Burner Lid P00115346A 1

Side Burner Pot Support P00805013B 1

Side Burner Gas Valve Assembly(NG only) 1

A7 ',Control Knob for Side Burner 1 A8 Control Knob Seat P03415263L 1

Side Burner with Brass Ring (NG only) P02002011D 1

A10 Side Burner Bracket P02215072E 1 A11 Side Burner Connection Hose P03705019J 1

For the repair or replacement parts you need:

Callanytime 1-800-4-MY-HOME® (1-800-469-4663)

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed Important: Use only Kenmore replacement parts. The use of any part that is not a Kenmore replacement

part can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.

Install Casters

[] Place the Cart Bottom Shelf on the cardboard

work surface with the bottom side of shelf facing up. Install the 4 Casters onto the

Caster Seats as shown.

Phillips Head Screw 1/4"xl/2"

Qty. 16

Part # S112G0408A

(Black Painted)

Install Cart Legs with Side Panels

[] install the left and right Cart Legs with Side Panel

(parts are labeled L or R) to Cart Bottom Shelf.

Phillips Head Screw 1/4"x2" Qty. 8

Part # S112G0432A (Black Painted)

Install Cart Rear Panel

[] Install the Cart Rear Panel between rear cart Legs as shown.

Phillips Head Screw 1/4"xl/2" Qty. 4

Part # S112G0408A (Black Painted)

,/"

-_/

,/"

Install Left Partition Panel [] Install the Left Partition Panel to Left Cart Side Panel

and Cart Rear Panel.

[] Install the Left Partition Panel Bracket between

Partition Panel and Cart Bottom Shelf.

Phillips Head Screw 1t4"xl/2" Qty. 7 Part # S112G0408A

(Black Painted)

Install Right Partition Panel (For NG Model only)

[] Repeat for Right Partition Panel.

Phillips Head Screw 1/4"xl/2"

Qty. 7

Part # S112G0408A

(Black Painted)

Install Door Bracket

[] Install the Door Bracket in the up position (part is labeled

UP to ensure proper assembly) between front Cart Legs as shown.

Phillips Head Screw 1/4"x2"

Qty. 4

Part # S112G0432A (Black Painted)

+ 21 hidden pages