Use & Care Guide
Manual de Uso y Cuidado
English / Espafiol
Models/Modelos: 119.16126011
I(enmore
@ @
P?ri
P/N MCDLPTA000
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A
www.kenmore.com
www.sears.com
@
@ @
o
Primary Safety Warnings .................................... 1-3
Warranty Information ..............................................
Pre-Assembly instructions ..................................... 3
Part Diagram and Lists ....................................... 4-7
Assembly instructions ...................................... 8-17
Use & Care Instructions ................................. 18-27
Frequently Asked Questions .......................................... 27
Spanish Guide ............................................................. 28-54
Repair Protection Agreement ......................................... 55
Sears Parts and Service Information .......................... 56
Kenmore Full Warranty
If this grill fails due to a defect in material or workmanship
within one year from the date of purchase, call
1-800-4-MY-HOME® to arrange for free repair (or
replacement if repair proves impossible).
For five years from the date of purchase, the
stainless steel burners will be replaced free of
charge if they rust through. After the first year
from the date of purchase, you must pay the labor
cost to have them installed.
All warranty coverage excludes ignitor batteries,
grill part paint loss, discoloration, and surface
rusting, which are either expendable parts that can
wear out from normal use within the warranty
period, or are conditions that can be the result of
normal use, accident or improper maintenance.
IF YOU SMELL GAS"
• Shut off gas to the appliance.
• Extinguish any open flame.
• Open lid.
• If odor continues, keep away
from the appliance and immediately
call your gas supplier or your fire
department.
• Do not store or use gasoline or other
flammable liquids or vapors in the
vicinity of this or any other appliance.
• An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
If you are missing parts, need assistance during
assembly, or have any other questions, please call
1-800-933-0527 between the hours of 8:30am
and 5:00pm, Monday through Friday, Central time.
Note that you will be speaking with a
representative of the grill manufacturer and not a
Sears employee.
Product Record
IMPORTANT" Fill out the product record information
below.
All warranty coverage is void if this grill is ever used for
commercial or rental purposes.
All warranty coverage applies only if this grill is used in the
United States.
This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
Sears Brands Management Corporation
Hoffman Estates, IL 60179
For residential use only. Do not use for commercial cooking.
• Model Number 119.16126011
Serial Number
(See silver CSA plate inside of Cabinet Panel)
• Date Purchased
• Read and follow all Safety, Assembly, and Use &
Care Instructions in this Guide before assemblin9
and cooking with this grill,
• Failure to follow all instructions in this Use & Care
Guide may lead to fire or explosion, which could
result in property damage, personal injury, or
death,
DO NOT light this grill without first reading
the Lighting Instructions.
DO NOT light this grill without checking the
burner tubes for blockage that could have
occurred during shipment. See the Cleaning and
Maintenance Instructions.
• DO NOT use any type of charcoal in this grill.
• DO NOT operate the main burners and back
burner at the same time. (If Equipped)
• ALWAYS inspect the grease tray before each
use. Remove and clean as necessary.
THIS GRILL IS FOR OUTDOOR USE ONLY!
This outdoor cooking gas appliance is not
intended to be installed in or on boats or
recreational vehicles.
The installation must conform with local codes or, ir
the absence of local codes, with either the National
Fuel Gas Code, ANSI Z223.1/NFPA 54, or CAN/CGA
B149.1, Natural Gas and Propane Installation Code
or Propane Storage and Handling Code, B149.2.
All electrical accessories (such as a rotisserie or
light) must be electrically grounded in accordance
with local codes, or in the absence of local codes,
with the National Electrical Code, ANSI/NFPA 70, or
the Canadian Electrical Code, CSA C22.1. Keep any
electrical cords away from hot surfaces.
use your gas gr ng, garage,
porch, shed, breezeway or any other enclosed
area.
• NEVER obstruct the flow of ventilation air around
your gas grill cabinet.
• DO NOT leave children and pets unattended in the
area when the grill is in operation.
• ENSURE the grill is on a level surface when in
operation. You can adjust the feet in the front to
level and stabilize the grill.
• NEVER attach an unregulated gas line to this
appliance.
Liquid Propane Gas (LPG) grills must be used with
the liquid propane gas regulator assembly
supplied. This grill is not convertible to natural
gas.
ALWAYS keep the gas hose assembly away from
any heated surface and dripping grease. Avoid
unnecessary twisting of the hose. Visually
inspect the hose prior to each use for cuts,
cracks, excessive wear, or other damage. Do not
use the gas grill if the hose appears damaged.
Call Sears at 1-800-4-MY-HOME®
(1-800-469-4663) for a Kenmore replacement
gas hose assembly.
PRE-ASSEM BLY
• Two people will be necessary to assemble the
larger parts of the grill.
• Lay a cardboard sheet on the floor and use as a
work surface to protect floor and grill parts from
scratches.
• Once all parts are removed and unpacked, use
the Hardware and Part Diagrams to ensure all
items are included and free of damage.
• Use protective gloves when assembling this grill.
SAVE THESE INSTRUCTIONS!
• Leave the instructions with the consumer.
• Retain the instructions for future reference.
G
A
Grill Transport Handle Heat Shield
Phillips Head Bolt M6x25mm
Qty: 2pcs
Part No... MCDKY14000
Flat Heat Bolt M6x25mm
Qty: 4pcs
Part No. MCDKY15000
Step Heat Bolt M6
Qty: 4pcs
Part No.: MCDKY16000
D
Qty: 2pcs
Part No.: FP0027
H
B
Phillips Head Screwdriver
Qty: 1 pc
Part No.: MCDKY20000
C
Battery Size AA
Qty: 1 pc
Flat Heat Bolt M6x12mm
Qty: 8pcs
Part No.: MCDKY17000
E
Phillips Head Bolt M6xl0mm
Qty: 9pcs
Part No.: MCDKY18000
Washer Head Bolt M4xl0mm
Qty: 14pcs
Part No.: MCDKY19000
Propane Tank Support Chain Hook
Qty: 1 pc
Part No.: $4061-000B-001
K
Propane Tank Support Chain
Qty: 1 pc
Part No.: SE0232-001
A1
A2
i
2
Part No
HCDKCVA038
*ASMA0014-03
Description
Hood Assembly
Hood Bolt
A3
A4
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
Bll
B12
B13
B14
B15
B16
B17
B18
B19
i
SE0208
CA0045-002
i
i
HCDLBDA048
SC0096
i
2
$7007-026D-018
2
$7007-026D-017
i
$1036-026D-016
i
MCDKADD000
i
$1036-026D-017
3
SD0050-A
i
SE9012
*ASMB0084-02
i
i
*ASMB0084-03
3
PLABS0090-001
3
FA0121-001
SE0282-001
i
2
FP0027
i
*ASMB0081-04
i
SE0280-012
2
SE0281-012
3
$1007-012E-015
Thermometer
Thermometer Seat
Firebox Assembly
Gas Manifold Assembly
Shelf Right-Front Left-Back Support
Shelf Left-Front Right-Back Support
Control Panel Left Support
Regulator and Hose Assembly
Control Panel Right Support
'T' Burner
Electric Igniter
Firebox Front Shield Panel
Control Panel
Control Knob
Control Knob Seat
Manual Igniter Stick
Grill Transport Handle Heat Insulator
Grill Transport Handle
Warming Rack
Cooking Grate
Heat Diffuser
B20
B21
B22
B23
B24
B25
B26
B27
C1
C2
C3
$1017-026D-012
i
i
MCCCYPD125
MCDKYPB000
i
4
FE0025M
3
SE9009
i
SE0131B
*ASMB0081-06
i
i
*ASMB0084-04
2
HCDKFRA038
i
*ASMC0083-03
*ASMC0084-02
i
Firebox Rear Shield Panel
Grease Pan
Grease Pan Bracket
Hood Bumper
Electrode
Electronic Igniter Button
Firebox Assembly Support
Electronic Igniter Wire Set
Cabinet Side Panel
Cabinet Front Panel
Cabinet Frame Assembly
Key Qty Part No Description
C4 1 HCDKBTA048 Cabinet Bottom Panel
C5 2 FE0080 Caster
C6 2 FE0154N Adjustable Foot
C7 1 $8015-000B-001 Bottle Opener
C8 1 $8014-000A-007 Cap Catcher
C9 1 $4061-000B-001 Propane Tank Support Chain Hook
C10 1 SE0232-001 Propane Tank Support Chain
Cll 1 MCDKFRH015 LP Tank Bracket
D1 1 $7002-026D-022 Left Shelf Assembly
D2 1 $7002-026D-023 Right Shelf Assembly
D3 2 *ASME0024-03 Shelf Handle
D4 1 *ASME0083-01 Shelf Left Control Panel
D5 1 *ASME0083-02 Shelf Right Control Panel
N/A 1 PCDKPA0000 Hardware Pack
N/A 1 MCDLPTA000 Manual
If you are missing hardware or have damaged parts after unpacking grill, call 1-800-933-0527 for
replacement.
To order replacement parts after using grill, Call 1-800-4-MY-HOME ®.
Install Cabinet Left Side Panel and Right Side Panel
[] Attach Cabinet Left Side Panel to the Cabinet Base using 2 Phillips Head Bolts (M6xl0mm).
[] Attach Cabinet Right Side Panel to the Cabinet Base using 2 Phillips Head Bolts (M6xl0mm),
Do not fully tighten any bolts at this time,
Phillips Head Bolt M6xl0mm
Qty: 4
Install Cabinet Front Panel and LP Tank Bracket
[] Attach Cabinet Front Panel to the Cabinet Base using 1 Phillips Head Bolt (M6xl0mm).
[] Attach Cabinet Front Panel to the Cabinet Left and Right Side Panels using 4 Washer Head Bolts
using the top and lower holes(M4xl0mm), Do not fully tighten any bolts at this time,
[] Attach LP Tank Bracket to center holes of Cabinet Front Panel using 2 Washer Head Bolts as shown,
Phillips Head Bolt M6xl0mm
Qty: 1
Washer Head Bolt M4xl0mm
Qty: 6
LP Tank Bracket
Qty: 1
Instal| Cabinet Frame
[] Slide Cabinet Frame into position between side panels as shown.
[] Attach the Cabinet Frame to the Cabinet Base using 2 Phillips Head Bolts (M6xlOmm).
[] Attach the Cabinet Frame to the Cabinet Left and Right Side Panels using 5 Washer Head Bolts
(l_14x::[Omm). Now ensure base and cabinet components are square and tighten all bolts used in the
cabinet assembly,
Phillips Head Bolt lq6xlOmm
Qty: 2
Note: Do not install this
Washer Head Bolt lq4xlOmm
Qty: 5
Attach Propane Tank Support Chain and Propane Tank Support Chain Hook
[] Attach the Propane Tank Support Chain to Cabinet Frame using 1 Washer Head Bolt (M4xlOmm),
[] Attach the Propane Tank Support Chain Hook to Cabinet Frame using 1 Washer Head Bolt
(M4xlOmm).
Propane Tank Support Chain Hook
Qty: 1
center boltatthistime.
Washer Head Bolt M4xlOmm
Qty: 2
Hang Bottle Cap Catcher
[] Hang Bottle Cap Catcher on the Cabinet Front Panel.
Install Hood and Firebox Assembly
[] Remove regulator and hose from underside of Hood and Firebox Assembly. Remove packing
from regulator.
[] With the aid of an assistant, place Hood and Firebox Assembly onto the Cabinet, and attach to
the Cabinet Frame using 2 Phillips Head Bolts (M6x25mm).
Phillips Head Bolt M6x25mm
Qty: 2
10
Attach Hood and Firebox to Cabinet Assembly 8= Install the Regulator Hose Support Chain
[] Attach the Hood and Firebox Assembly to the front of the Cabinet Side Panels using 2 Phillips
Head Bolts (M6xi0mm)..
[] Attach the Regulator Hose Support Chain (on the regulator hose) to the back of cabinet Side
Panel using ! Washer Head Bolt (M4xl0mm),
Phillips Head Bolt M6xi0mm
Qty: 2
Washer Head Bolt M4xi0mm
Qty: i
Install Grease Pan Bracket and Grease Pan
[] Insert the Grease Pan Bracket into the bottom of Lower Heat Shield.
[] Install the Grease Pan into the Grease Cup Bracket, inserting it from the Back of the cabinet.
1!
Install Control Knobs
[] Press 3 Control Knobs onto the valve stems as shown.
Install Side Shelf Supports to Firebox Assembly
[] Attach Side Shelf Right Front Support and Side Shelf Right Back Support to Firebox Assembly
using 4 Flat Head Bolts (M6x::[2mm).
[] Attach Side Shelf Left Front Support and Side Shelf Left Back Support to firebox Assembly
using 4 Flat Head Bolts (M6x12mm).
Flat Heat Bolt M6x12mm
Qty: 8
Pin
12
Step Bolt M6
Qty: 4
Attach Side Shelves
[] Position the Shelf Brackets to the inside of the Shelf Supports in storage position.
[] Attach Left and Right Shelves to Shelf Supports with 2 Step Bolts (M6) each. Securely tighten.
Side Shelf Operation
[] Pull up on the Left Side Shelf and slide down over the support pins to secure in the upright
position. Repeat the same procedure on the Right Shelf. To lower, slide shelves up and fold down
into storage position.
mmmmm mmmmm
• •
13
Install the Heat Diffusers, Cooking Grates, Warming Rack
[] Insert the Heat Diffusers into the firebox by placing them into the indentations along the front
and back of the firebox, See Figure 1,
[] Place the Cooking Grates into the firebox, See Figure 2,
[] Insert the Warming Rack into the slots of firebox side panels as shown, See Figure 3
Inset 1
Inset 3
Inset 2
14
Install Grill Transport Handle
[] Attach Transport Handle and 2 Handle Heat Shields to the back of the Firebox using 4 Flat Head
Bolts (M6x25mm).
Transport Handle Heat Shield
Qty: 2
Flat Heat Bolt M6x25mm
Qty: 4
Place and Secure LP Cylinder into the Cabinet
[] Be sure the LP cylinder is "OFF" by turning the hand wheel clockwise until is stops. Place the LP
cylinder down into the tank support hole in the bottom of the cabinet. Be sure the burner control
is turned to the "Off" position, Remove the safety cap from the cylinder valve, Center the
nipple of the regulator into the cylinder and turn the black nut clockwise until it stops, Hand tighten
only,
[] Hang the Propane Tank Support Chain around the LP tank and attach to its hook to secure the tank,
Propane Tank Support Chain
Qty: 1
15
Install Battery
[] Unscrew the electronic igniter cap. Place the "AA" Battery into the igniter with the positive (+) end
up. Screw the electronic igniter cap back into place.
Battery (Size AA)
Qty: 1
Do not dispose batteries into
fire as they may leak or
explode,
Congratulations - Assembly is now complete!
[] Remove any additional labels or packing material from the grill except the CSA label. Be sure to
clean all foam packing material out of all areas.
[] Please proceed to and read the remaining sections of the Use & Care Guide prior to hooking up
your LP cylinder or operating your grill.
ld
l_ 6rill Transport
[] Grasp Grill Transport Handle with one hand and Grill Hood Handle with the other. Place foot
against back of grill base for leverage. Tilt grill back onto wheels to transport.
CAUTION: Grill must be completely cooled down before transporting.
17