
,, E/AIRtS
Vacuum Cleaner
Owner's Manual
)
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this product°
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
PART NO. CO1ZARD10UOO-4370537 Printed in U,S,A.

Before Using Your New Vacuum ....... 2
Kenmore Vacuum Cleaner Warranty .. • 2
Important Safety Instructions ......... 3
Parts and Features ................... 4-5
Assembly .......................... 6-7
Use .............................. 8
How to Start ....................... 8
Vacuuming Tips ....................... 9
Suggested Pile Height Settings ......... 9
Attachments ......................... 10
Attachment Use Chart ................... 10
Performance Features ............... ! !
How Your Vacuum Works ............ 12
Please read this guide. It will help you assemble and operate your new Kenmore vacuum in
the safest and most effective way
For more information about the care and operation, call your nearest Sears store. You will
need the complete model and serial numbers when requesting information. Your vacuum's
model and serial numbers are located on the Model and Serial Number Plate.
Canister Care ...................... 12
Bag Changing ....................... t2
Motor Safety Filter Cleaning ........... 13
Cleaning Exterior and Attachments ..... t3
Power-Mate TM Care ................... 14
LightBulb Changing ................... 14
Belt Changing and Brush Cleaning . • 14-15
Brush Servicing ...................... 16
Brush Assembly ...................... 16
Troubleshooting ..................... 17
Requesting Assistance Or Service ..... 18
Use the space below to record the model number and serial number of your new Kenmore
vacuum.
Model No..
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.
FULL ONE-YEAR WARRANTY
When used for private household purposes, if within one year from the date of purchase, this
vacuum cleaner fails due to a defect in material or workmanship, RETURN ITTO THE NEAR-
EST SEARS SERVICE CENTER/DEPARTMENT IN THE UNITED STATES, and Sears will
repair it free of charge.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
SEARS, ROEBUCK AND CO., D!817 WA, Hoffman Estates, IL 60179

WARNING
Your safety is important to us. To reduce the risk of fire, electrical shock, injury to
persons or damage when using your vacuum cleaner, follow basic safety precau-
tions including the following:
Read this manual before assembling or
using your vacuum cleaner.
Use your cleaner only as described in this
manual. Use only with Sears recommended
attachments.
To reduce the risk of electrical shock- Do
not use outdoors or on wet surfaces.
Disconnect electrical supply before servic-
ing or cleaning out brush area. Failure to do
so could result in electrical shock or brush
suddenly starting,
Always turn cleaner off before connecting or
disconnecting the hose or POWER*MATE "_.
Always turn cleaner off before unplugging.
Do not unplug by pulling on cord_ To unplug,
grasp the plug, not the cord.
Hold plug when rewinding onto cord reel.
Do not allow plug to whip when rewinding,
Do not use with damaged cord or plug If
cleaner is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, return it to a Sears Service
CenteflDepartment.
Do not pul! or carry by cord, use cord as a
handle, close door on cord, or pull cord
around sharp edges or corners. Do not run
cleaner over cord. Keep cord away from
heated surfaces.
Do not leave cleaner when plugged inn
Unplug from outlet when not in use and
before servicing
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children.
Do not handle plug or cleaner with wet
hands.
Do not operate the cleaner with a punctured
hose_ The hose contains electrical wires_
Replace if cut or worn. Avoid picking up
sharp objects
Do not put any objects into openings.
Do not use with any opening blocked; keep
free of dust, lint, hair and anything that may
reduce air flow.
Keep hair, loose clothing, fingers, and all
parts of body away from openings and mov-
ing parts.
Do not use cleaner without dust bag and/or
filters in place°
Always change the dust bag after vacuum-
ing carpet cleaners or freshener, powders
and fine dust. These products clog the bag,
reduce airflow and can cause the bag to
burst° Failure to change bag could cause
permanent damage to the cleaner.
Do not use the cleaner to pick up sharp hard
objects, small toys, pins, paper, etc_ They
may damage the cleaner or dust bag.
Do net pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
Do not use cleaner to pick up flammable or
combustible liquids (gasoline, cleaning fluids,
perfumes, etc.), or use in areas where they
may be present. The fumes from these sub-
stances can create a fire hazard or explo-
sion
Use extra care when cleaning on stairs, Do
not put on chairs, tables, etc. Keep on floor,
You are responsible for making sure that
your vacuum cleaner is not used by anyone
unable to operate it properly.
SAVETHESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities, Your cleaner
is intended only for household use° Read this Owner's Manuat carefully for important use and
safety information. This guide contains safety statements under warning and caution symbols_
Please pay special attention to these boxes and follow any instructionsgiven, WARNING
statements alert you to such dangers as fire, electrical shock, burns and personal injury.CAU-
TION statements alert you to such dangers as personal injury and/or property damage.

it isimportantto knowyourvacuumcleaner'spartsandfeaturesto assureitsproperandsafe
use Reviewthesebeforeusingyourcleaner,,
Plug Holder
Wand Swivel
Belt
In U,& #20.5285
In Canada #40110
Upper
Wand
Cord and
Cord Holder
POWER.MATE TM
Power Cord
i -_- Cord and
-- Handle Quick
Release
(Some Models}
*---- Upper
Wand
a
0
Wand Quick
Release Pedal
(Some Models}
POWER.MATE TM
Model/Serial Numbers
(On Bottom) /
Handle
Release//
Pedal
/
Pile Height Pedal
(Some Models}
Pile Height Indicator
(Some Models}
_F_ (Some Models)
Overload Protector
(Reset Button)
POWER-MATETM
Headlight and Lens
Bulb
In U.S. #20.5240 I
In Canada #596181
Light Cover
(Some Models)
Edge Cleaner
(Not Shown}
J

HOSE
Speed
Control
(Some
Models)
3-Way On/Off Switch
Off/Bare Floor/Carpet
(Some Models)
Hand_
Hose SwiveJ
ATTACHMENTS
Crevice
Tool
Dusting
Brush ------_1._
Brush
Fabric ._______
Brush
Floor _________
NOTE: All models have one set of
attachments in the canister. Some
models have an additional set,
which can be kept in the accessory
bag for garage use,,
CANISTER
Attachment
Storage
Canister
Hood
Performance
Indicator
(Some Models)
Bag Holder
Covet
Canister Performance
Indicator Light
(Some Models)
Cord
Rewind Bar
(Not Shown)
Motor Safety Filter
(Behind Dust Bag)
Canister Model/
Serial Numbers
(OnBottom)

Before assembling your vacuum cleaner, be
sure you have all parts shown in PARTS
AND FEATURES°
E• WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Slide wands
together until au
w,.os
wand button
snaps into place_
Turn wand button ,A
to the slotted
area of the wand
Handle
Handle
Button --_
The swivel allows
swivel. Wand
you to turn the
handle to the left
side to reach far-
ther under low
furniture.
Swivel --
Cord
Holder /
POWER-MATE TM
1. Insert wands into POWER-MATE TM until
the wand buttons snaps into place.
2. Connect
POWER-MATE TM
plug and cord as
shown. DO NOT
force. Raised area
of plug must be
toward hand.
3. Secure cord into
cord holder on
wand swivel.
POWER-
MATE TM
Wand
Swivel
Wand
Wand
Button
Swivel
-- Wand Quick
Release Pedal
To remove: Disconnect cord and step on
wand release pedal, then pull up on wands,
6