Kenmore 11639055900, 11639050900 Owner’s Manual

Use & Care Guide

Manual de Uso y Cuidado

Vacuum

Cleaner

Aspiradora

Model, Modelo

IMPORTANT

Before returning this product-

For [eplacement parts, please contact:

Sears Parts and Repair Center

(I =800-488-1222)

Anytime, day or night

(U.SA. only)

For any other issue, please contact:

Vacuum Cleaner Help Line

(1-877-531-7321)

8:00am-5:00pm EST, M-F

(U.SA and Canada)

116.39050

116.39055

_-_,_?1

CAUTION: Read and follow all

safety and operating instructions before first

use of this producL

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A, www.kenmore,com www,sears.com

Part No. C01ZDHK_UOO-KCO1ZDHKZOU0

CUIDADO: Lea y siga todas las

instrucciones de operaci6n y seguridad antes del uso

de este producto.

Printed in Mexico

Impreso en Mexico

Before Using "four New

Vacuum Cleaner .................. 2

Packing List .................... 2

Kenmore Vacuum Cleaner Warranty , 3

Important Safety Instructions ...... 4

Parts and Features ......... 5

Assembly Instructions ............. 6

Handle .......................... 6

Attachment Assembly ......... 7

Power Cord .......... 8

Operating Instructions ......... 9

Power Cord ..................... 9

Releasing the Handte ............. 10

OFFtFLOO RtCARPET Switch ..... 10

Pile Height Selection ............... 11

Suggested Pile Height Settings ....... 11

Attachments ..................... I2

Please read this guide. It will help you assemble and operate your new Kenmore vacuum cleaner in the safest and most effective way,

Attachment Use Table ............... 13

Vacuuming Tips ................... 13

Performance/Safety Features ,. 14-15

Vacuum Cleaner Care .......... IB

Vacuum Cleaner Storage ....... 16

Cleaning Exterior and Attachments .... 16

Dust Cup Emptying .................. 17

Dust Cup Cleaning ................. 18

Pre-Filter Cleaning .............. 1g

Primary Filter Cleaning ........... 20

Exhaust Filter Replacement .......... 21

Agitator Cleaning .................. 2 t

Clog Removal ................ 22

Troubleshooting .............. 24

Master Protection Agreements ..... 25

Requesting Assistance

Or Service ................ Back page

For more information about vacuum cleaner care and operation, call your nearest Sears Parts and Repair Center or the Vacuum Cleaner Help Line listed on the cover of this guide. You

will need the complete model and serial numbers when requesting information, "four vacuum

cleaner's model and serial numbers are located on the Model and Serial Number Plate Use the space below to record the model number and serial number of your new Kenmore

vacuum cleaner_

Model No..

Serial No,

Date of Purchase

Keep this book and your sales check (receipt) in a safe place for future reference.

PACKING LIST

Your KENMORE VACUUM CLEANER is packaged with the following parts and compo- nents assembled separately in the carton:

1 Upright Vacuum Cleaner t Pet Handi Mate TM I Handle I Telescoping Wand

1 Crevice Tool 1 Use & Care Guide t Combination Brush t Repair Parts List

Each of the above assemblies are shown in detail inside the Repair Parts List,

One"fearLimited Warranty Whenassembled,operatedandmaintainedaccordingto allinstructionssuppliedwith theproduct,if thisvacuumcleanerfailsduetoadefectin materialorworkmanshipwithin

oneyearfromthedateofpurchase,returnittoanySearsstore,SearsParts& Repair CenterorotherKenmoreoutletforfreerepair.

Ifthisvacuumcleaneris usedforotherthanprivatefamilypurposes,thiswarranty

appliesforonly90 daysfromthedateofpurchase. Thiswarranty covers only defects in material and workmanship. Sears will NOT

pay for:

1,. Expendable items that can wear out from normal use, including but not limited to

filters, belts, light bulbs, and bags.

2.. A service technician to instruct the user in correct product assembly, operation or maintenance.

3 A service technician to clean or maintain this product.,

4. Damage to or failure of this product if it is not assembled, operated or maintained according to all instructions supplied with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with

the product..

7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.

Disclaimer of implied warranties; limitation of remedies Customer's sole and exclusive remedy under this limited warranty shall be product repair

as provided herein, implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages° Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these

exclusions or limitations may not apply to you.

This warranty applies only while this vacuum cleaner is used in the United States and

Canada.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8

WARNI G:

Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions including the following:

Use your vacuum cleaner only as described in this manual. Use only with

Sears recommended attachments,

Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts

Disconnect electrical supply before ser- vicing or cleaning out the brush area

Failure to do so could result in the brush unexpectedly starting, causing personal injury from moving parts.

Do not leave vacuum cleaner when plugged in, Unplug from outlet when

not in use and before performing main- tenance,

To reduce the risk of electrical shock -

Do not use outdoors or on wet surfaces. Do not allow to be used as a toy. Close

attention is necessary when used by or

near children. Do not use with a damaged cord or

plug. If vacuum cleaner is not working

as it should, has been dropped, dam-

aged, left outdoors, or dropped in water, return it to a Sears Service Center for

assessment before using again. Do not pull or carry by cord, use cord

as a handle, close a door on cord, or pull cord around sharp edges or cor-

ners Do not run vacuum cleaner over cord,. Keep cord away from heated sur-

faces r Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord..

Do not handle plug or vacuum cleaner

with wet hands.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Do not put on chairs, tables, etc. Keep on floor.

Do not use vacuum cleaner to pick up flammable or combustible liquids (gaso-

line, cleaning fluid, perfumes, etc,), or

use in areas where they may be pre- sent The fumes from these substances

can create a fire hazard or explosion.

Do not pick up anything that is burning

or smoking, such as cigarettes, match-

es, or hot ashes.

Do not use vacuum cleaner without

dust cup and/or filters in place.. Always clean the dust cup after vacu-

uming carpet cleaners or freshener,

powders, and fine dust° These products

clog the filters, reduce airflow and can

cause damage to the vacuum cleaner_

Failure to clean the dust cup could

cause permanent damage to the vacu-

um cleaner,

Do not use the vacuum cleaner to pick

up sharp hard objects, small toys, pins,

paper clips, etc. They may damage the

vacuum cleaner or dust cup_

Unplug before connecting Pet Handi

Mate T_

Do not put any objects into openings..

Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow,.

You are responsible for making sure that your vacuum cleaner is not used by anyone unable to operate it properly,

SAVE THESE INSTRUCTHO

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum cleaner is intended for Household use. Read this Use & Care Guide carefully for

important use and safety information. This guide contains safety statements under warning and caution symbols.

Itisimportanttoknowyourvacuumcleaner'spartsandfeaturestoassureitsproperandsafe use Reviewthesebeforeusingyourvacuumcleaner.

Object Style No. Part No. Part No,

in USA in Canada

Exhaust Filter f EFq 20_86889 20-40324

Quick Release

Cord Hook----_ !

Pet

Carry

Primary Filter Cover

(Filter Inside

Combination Brush

Handle Release

Pedal-\_ k

Hose

Release Level

Dirt

Tool

Telescopic

Wand

Holder

Model/Serial Numbers

Hose

...... .......Pi_ease pay speciai attentio nto_ihese haza;d ate d boxesl and fo flow any inStr"c _I

tions given. WARNING statements alert you to such hazards as fire, electric shock, burns and personal injury CAUTION statements alert you to such haz-

ards as personal injury andtor property damage.

Before assembling the vacuum cleaner,

kWARNING

Electrical Shock Hazard

Do not plug vacuum cleaner into the electrical supply until the assembly is

complete. Failure to do so could result in eletrical shock or injury.

check the PACKING LISTo Use this list to verify that you have received all the

components of your new Kenmore vacuum cleaner.

HANDLE

CAUTION

Do not overtighten handle screw,

Overtightening could strip the screw

holes,

Do not operate the vacuum cleaner

without the screw in place,

I, Remove the handle screw from the

body of the vacuum cleaner°

2. Position the handle assembly as shown in the illustration.

3. Using a screwdriver, tighten handle

screw,

NOTE: It may be necessary to adjust the handle slightly.

Handle

Screw Hole

Handle

ATTACHMENT ASSEMBLY

HOSEAND WAND

1, Insert the tab on

the telescopic wand

into the "J" slot on the hose handle. Twist

the telescopic wand to lock in place°

2. Place the telescop- ic wand in the wand

holder and route the hose as shown.

Hose /

Holder _( /

Raised

Edge

4, Rotate the

hose release lever down and

route the hose as shown

5, Snap the hose into the

hose cuff on the side of the vacuum cleaner

Hose Handle

Hose

Telescopic

Hose Release

Wand

3, Snap the hose handle

into the hose holder located on the handle

of the vacuum cleaner_

NOTE: Be sure the raised

edge of the hose handle

rests against edge of the

hose holder,

PET HANDI MATE TM For operation of Pet Handi Mate TM see

separate Use & Care Guide,

1, Place Pet Handi Mate TM

Pet Ha n dl Mate TM

into the storage area

2. Rotate the Pet Handi Mate TM

back until it

snaps into place,

CREVICE TOOL

t, Insert the crevice tool into

the holder on the

side of the vacu- um cleaner as

shown.

COMBINATION BRUSH

1, Insert the combination

brush into

the holder

on the back of the

vacuum

cleaner as shown.

Hose Release

6, Rotate the hose release lever

upwards to lock the hose in place

[

1. Make sure that cord hook is in upright position as shown,

2, Wrap power cord loosely around cord hook and carry handle,

3. Lock power cord plug onto the power cord,

POWER CORD

WARNBNG

Electrical Shock and Personal Injury Hazard

Wrapping the cord too tightly puts stress

on the cord and can cause cord damage. A damaged cord is an electrical shock

hazard and could cause personal injury

or damage.

Carry

CAUTtON

Moving partsl To reduce the risk of personal injury, DO NOT touch the agitator when vacuum

cleaner is on. Contacting the agitator while it is rotating can cut, bruise or cause other injuries°

Always turn off and unplug from electrical outlet

before servicing. Use caution when operating near children.

I. Turn the quick release cord

hook to either side and down to release the

power cord,

POWER CORD

, WARN NG I

• To reduce the risk of electric shock,

this vacuum cleaner has a polarized

plug (one blade is wider than the other).

The plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a

qualified electrician to install the proper outlet. Do not change the plug in any way.

2. Detach the power cord plug from the power cord and pull the cord off the quick

release cord hook

3. Be sure the power cord is

locked into the locking notch of

the quick release

cord hook

Locking

Power

Cord

]

4. Plug the polarized power cord into a 120 Volt outlet located near the floor

WARNING

Personal Injury and Product Damage Hazard

DO NOT use outlets above counters. Damage from cord to items in

surrounding area could occur.

5. To store cord, turn the quick release

cord hook to the up position, then wrap cord loosely around quick release cord

hook and carry handle.

WARNING

Electrical Shock And Personal Injury Hazard

Wrapping the cord too tightly puts stress

on the cord and can cause cord damage.

A damaged cord is an electrical shock

hazard and could cause personal injury or damage.

[

Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with

your hand, Note: The agitator does not rotate when the

vacuum cleaner is in the upright position

RELEASING THE HANDLE t

OFFIFLOOR/CARPET SWITCH 1

]

To start the vacuum cleaner, slide the OFFtFLOOR/CARPET switch from the OFF

position to the FLOOR or CARPET position

d CAUTION

Refer to your carpet manufacturers

cleaning recommendations. Some

more delicate carpets may require that they be vacuumed with the agitator turned off, to prevent carpet damage.

To stop the vacuum cleaner, slide the ON/FLOORICARPET switch to the OFF

position,

CAUTmON

Do not allow vacuum cleaner to

remain in one spot for any length of time when the agitator is turning.

Damage to carpet may occur.

OFF - turns both OFF/FLOOR/ suction and CARPET

brush motors off FLOOR - turns Selector

on the suction motor only In

this position the agitator does

not revolve Use this setting for cleaning hardwood and

tile floors and when any attachments (tools) are used

CARPET - turns on both the suction and the brush motors.

Note: The agitator does not rotate when the vacuum cleaner is in the upright position.

PILE HEIGHT SELECTION

To select a pile height setting: Select a pile height setting by pressing the

HEIGHT ADJUST button on the side of

the nozzle, The pile height setting shows

on the indicator window., See SUGGESTED PILE HEIGHT SETTINGS

CAUTION

Refer to your carpet manufacturers cleaning recommendations. Some

more delicate carpets may require that they be vacuumed with the agitator turned off, to prevent carpet damage.

r_HEIGH T

• %_.//'-3Y ADJUST J.---------------_'/_-../Button

_J'_-lndi;ator

Window

[

There are four (4) pile height Settings on the vacuum cleaner. For best deep down cleaning, use the XLO setting.. However,

you may need to raise the height to make some jobs easier, such as scatter rugs

and some deep pile carpets, and to prevent the vacuum cleaner from shutting offr

SUGGESTED PILE HEIGHT SETTINGS

Suggested settings are: HI - Shag, deep pile, or scatter rugs.

MED - Medium to deep pile. LO - Low to medium pile. XLO - Most carpets_ Also, use XLO with

FLOOR operation setting for bare floors and delicate carpets..

ATTACHiVIENTS

CAUTION

Do not use the hose when vacuum cleaner handle is tilted back into the

floor cleaning position.

Always return the vaccum cleaner to the upright position before using the

hose and attachments.

TO USE ATTACHMENTS

1, Place the vacuum cleaner in the upright position.

2, Remove the hose handle and wand by removing hose handle from hose holder and

lifting upo

CAUTION

When using attachments, be careful not to overextend the stretch hose

when reaching. Trying to reach beyond the hose stretch capability

could cause the vacuum cleaner to tip over,

kCAUTION

DO NOT pull the vacuum cleaner around the room by the hose, Property damage or personal injury could result.

TELESCOPING WAND

1. The wand length is adjustable and

requires no assembly To adjust, simply push down on

the wand handle and slide the upper wand

to the desired heighL

3. Use attachments as needed° See

ATTACHMENT USE TABLE.

FOR ADDITIONAL REACH

Rotate hose release lever down to release hose for

maximum hose reach,

Hose Release

2. Extend wand to desired length

COMBINATION BRUSH

The combination brush can be attached directly to the wan&

Combination [_

""'" /o,S

Use the brush holder without the brush for greater suction on furniture cushions

or stairs

Use brush holder with brush for cleaning

loose surfaces such as drapes,

ATTACHMENT USE TABLE

CLEANING AREA

ATTACHMENT

CREVICE TOOL

coMBINATION BRUSH '*_* PET HANDI MATE TM _d_

_/= Applicable

* Always clean attachments before using on fabrics and waits,

**Use the brush holder without the brush for greater suction on furniture cushions or stairs+

Use brush holder with brush for cleaning loose surfaces such as drapes,

Carpet edges Guide either side or the front of the nozzle

along the walt baseboard°

Stairs Set handle in full upright position. The

agitator stops rotating automatically Use the crevice tool, combination brush or Pet

Handi Mate TM

Unit Tipping

When using the attachments keep the

hose release lever in the locked position

when possible This helps to keep the vacuum cleaner from tipping over when

stretching the hose+ If additional hose is needed then unlock the hose release

lever and pull out additional hose, Use caution not to tip over vacuum cleaner

Furniture*

Between

Cushions*

Drapes*

Stairs

WARNING

Personal Injury Hazard Use care if vacuum cleaner is placed

on stairs. If it falls, personal injury or property damage could result.

For best cleaning results, keep the airflow passage clear, Unplug the vacuum clean-

er from the outlet before checking.

See CLOG REMOVAL

Walls

_'._$_,,_

MOTOR PROTECTION

SYSTEM

Thermal Protector- Suction Motor This vacuum cleaner has a thermal

protector which automatically trips to protect the vacuum cleaner suction motor

Ifa clog prevents the normal flow of air to

the motor, the thermal protector turns the motor off automatically This allows the

motor to cool in order to prevent possible damage to the vacuum cleaner

Thermal Protector - Agitator Motors This vacuum cleaner has thermal

protectors which automatically trip to protect the agitator motorsThe thermal

protectors turn the motors off automatically, This allows the motors to cool in order to prevent possible damage

to the vacuum cleaner_

CAUTION

Always return the vaccum cleaner to the upright position before using the

hose and attachments. Failure to do

so may result in overheating of the

agitator motors and can cause the

thermal protectors to trip.

Motor Protector

This vacuum cleaner has a motor protector

by-pass valve which prevents motor

overheating and damage The valve opens to provide cooling air when a clog prevents

normal air flow to the vacuum cleaner

suction motor You will notice a change of sound as air rushes through the valve

opening.

Motor

Protectol

To correct problem empty the dust cup and clean the primary filter. If using attachments, adjust to allow for greater

air flow.

NOTE: The motor protector may open when using attachments or when cleaning

new carpet due to reduced airflow caused by the attachments themselves or by new carpet lint filling the dust cup quickly_

To reset thermal protectors: Turn the vacuum cleaner off and unplug the power

cord from the outlet to allow the vacuum

cleaner to cool and the thermal protectors to reset

Check for and remove clogs, and

empty dust cup if necessary. See

CLOG REMOVAL section. Also check

and replace any clogged filters. Wait

approximately 40-50 minutes before

restarting vacuum cleaner.

Note: Do not block motor protector.

WARNING

Electrical Shock And PersonaJ Injury Hazard

Disconnect electrical supply before per-

forming maintenance to the vacuum cleaner. Failure to do so could result in

electrical shock or personal injury from vacuum cleaner suddenly starting.

AGITATOR OVERLOAD

PROTECTOR

The agitator has builtdn protection against motor damage should the agitator jam. If the agitator slows down or stops, the

agitator overload

protector shuts off

the agitator motors, The vacuum

cleaner suction

motor will continue

to run

To correct problem: Turn off and unplug vacuum cleaner, remove obstruction, then

press AGITATOR RESET BUTTON.

if the problem persists, have the vacuum cleaner serviced by a Sears or

other qualified technician.

DIRT SENSOR

The electronic dirt sensor is a feature which will detect particles as they pass

through the vacuum cleaner.

OPERATION

As you vacuum, the red indicator light will

come on and stay on as long as the

sensor detects a high concentration of

particles passing through the vacuum cleaner.

TO CLEAN DIRT SENSOR OPTICS

The dirt sensor optics consist of two optic

cells located inside the dust cup port. Occasionally, it may become necessary to

clean the two optic cells to assure maximum performance

It is recommended the optic cells be

cleaned,

• When the green light stays on continuously,.

• When dirt or dust adheres to the optic cells°

• Whenever the dust cup is removed,

To clean the sensor, wipe the optic cells with a soft, dry cloth, Never use cleaners

or liquids as they can help speed the recoating of the optic cells and

make it necessary to

clean them much sooner than

normal, The dirt sensor optic

cells can be reached by removing the

dust cup,

Dirt Sensor

Optic Cells _/

The dirt sensor indicators are located on the nozzle of the vacuum cleaner

. When little or no dirt is present the dirt

sensor is green°

• With medium or heavy concentration the dirt sensor is red.

Always follow all safety precautions when

performing maintenance to the vacuum cleaner

.................._,:r_::¸...............

WARNING

Electrical Shock And Personal Injury Hazard

Disconnect electrical supply before

servicing or cleaning the vacuum

cleaner. Failure to do so could result in electrical shock or personal injury

from vacuum cleaner suddenly starting.

Gather the cord

and wrap it loosely around

the quick release upper

cord hooks and carry handle,

Lock power cord plug onto the power cord.

Store the vacu-

um cleaner in a

dry, indoor area,

on the floor with the handle

locked in the upright position.

'vACUUM CLEANER STORAGE

Power Cord--_

Quick Release

Electrical Shock And Personal Injury Hazard

Wrapping the cord too tightly puts stress

on the cord and can cause cord damage. A damaged cord is an electrical shock

hazard and could cause personal injury or damage.

Carry

WARNING

CLEANING EXTERIOR AND ATTACHMENTS

Unplug cord from wall outlet.

Clean exterior using a clean, soft cloth that

has been dipped in a solution of mild liquid

detergent and water, then wrung dry. DO

NOT drip water on vacuum cleaner. Wipe dry after cleaning

To reduce static electricity and dust build- up, wipe outer surface of vacuum cleaner

and attachments,

Wash attachments in warm soapy water, rinse and air dry.. Do not clean in dish-

washer,

CAUTION

Do not use attachments if they are wet. Attachments used in dirty areas,

such as under a refrigerator, should not be used on other surfaces until

they are washed. They could leave marks.

+ 35 hidden pages