Kenmore 11635923500, 11635922502, 11635922501, 11635922500, 11635923501 Owner’s Manual
Owner's Manual
Manual Del Propietarie
Vacuum Cleaner
Aspiradora
Model, Modelo
116.35922
116.35923
iMPORTANT
Before returning this product-
For replacement parts, please contact:
Sears Parts and Repair Center
(1 =800-488-1222)
Anytime, day or night
(U_S.A. only)
For any other issue, please contact:
Vacuum Cleaner Help Line
(1-877-531-7321)
7:30am-4:00pm EST, M-F
(U.S.A. and Canada)
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
Part No. C_IZCRC5_U_-KC_IZCRCZ_U_
CUIDADO:
Lea y sigue todas las
instrucciones de peraci6n
y seguridad antes del uso
de este producto.
Printed in Mexico
impreso en Mexico
Before Using Your New
Vacuum Cleaner ........................ 2
Kenmore Vacuum Cleaner Warranty .,, 3
Important Safety Instructions ........... 4
Parts and Features ..................... 5
Assembly Instructions ............. 6-7
Operating Instructions ............... 7
Cord Release ...................... 7
Releasing the Handle .......................... 8
Touch Control ...................... 8
InteliCLEAN ......................... 9
Performance Indicator ..................... t0
Gentle Sweep Function ............... t0
Pile Height Selection and Setting ....... !0
Attachments ..................... I1-!2
Attachment Use Table ............... t3
Vacuum Cleaner Care ............... 16
Vacuum Cleaner Storage ............... 16
Cleaning Exterior and Attachments ...... 16
Dust Bag Replacement ................. 17
Motor Safety Filter CIeaning .................. 18
Exhaust Filter Replacement ............ 1B
Light Bulb Replacement .............. 19
Dust Bag Cover Replacement ............... !9
Agitator Cleaning ................... 20
Clog Removal ..................... 20
Troubleshooting .................... 21
Master Protection Agreements ........ 22
Requesting Assistance Or Service back page
li! !iiiiiiiii!!ii
Please read this guide, It wil! help you assemble and operate your new Kenmore vacuum
cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, cal! your nearest Sears store,
You wil! need the complete model and serial numbers when requesting information. Your vacu-
um cleaner's model and serial numbers are located on the Model and Serial Number Plate.
Use the space below to record the model number and serial number of your new Kenmore
vacuum cleaner,
Model No.
Serial No,
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference,
OneYearLimitedWarranty
Whenassembled,operatedandmaintainedaccordingto allinstructionssuppliedwith
theproduct,ifthisvacuumcleanerfailsduetoadefectin materialorworkmanshipwithin
oneyearfromthedateofpurchase,returnitto anySearsstore,SearsParts&Repair
Centerorother Kenmore outlet for free repair°
If this vacuum cleaner is used for other than private family purposes, this warranty
applies for only 90 days from the date of purchase.
This warranty covers only defects in material and workmanship. Sears will NOT
pay for:
1. Expendable items that can wear out from normal use, including but not limited to
filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product assembly, operation or
maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not assembled, operated or maintained
according to all instructions supplied with the product..
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for
other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners,
chemicals or utensils other than those recommended in all instructions supplied with
the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications
made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair
as provided herein. Implied warranties, including warranties of merchantability or fitness
for a particular purpose, are limited to one year or the shortest period allowed by law.
Sears shall not be liable for incidental or consequential damages. Some states and
provinces do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on the duration of implied warranties of merchantability or fitness, so these
exclusions or limitations may not apply to you°
This warranty applies only while this vacuum cleaner is used in the United States and
Canada.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada lnc.,Toronto, Ontario, Canada MSB 2B8
Readali instructions in this-manual before assembiing'0r"using""'your vacuumcieanerl ......
Your safety is important to us. To reduce the risk
&WAR
m I_I
of fire, electrical shock, injury to persons or
damage when using your vacuum cleaner, follow
basic safety precautions including the following:
Use your vacuum cleaner only as
described in this manual. Use only with
Sears recommended attachments.
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
Para un aspirado
mantenido fibre c
rnulaci6nde polo
enchufe y d_ vue
dor para ver si tie
pelo_
Use tijeraspara.,
da alrededor del
Disconnect electrical supply before ser-
vicing or cleaning out the brush area.
Failure to do so could result in the brush
unexpectedly starting, causing personal
injury from moving parts°
Do not leave vacuum cleaner when
plugged in. Unplug from outlet when not in
use and before performing maintenance.
To reduce the risk of electrical shock .. Do
not use outdoors or on wet surfaces..
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do not use with a damaged cord or plug. If
vacuum cleaner is not working as it should,
has been dropped, damaged, left outdoors,
or dropped in water, return it to a Sears
Service Center.
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
vacuum cleaner over cord, Keep cord away
from heated surfaces.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not handle plug or vacuum cleaner with
wet hands.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not put on chairs, tables, etc. Keep on
floor.
Do not use vacuum cleaner to pick up
flammable or combustible liquids (gasoline,
cleaning fluid, perfumes, etc_), or use in
areas where they may be present. The
fumes from these substances can create a
fire hazard or explosion.
Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.
Do not use vacuum cleaner without dust
bag and/or filters in place.
Always replace the dust bag after vacuum-
ing carpet cleaners or freshener, powders,
and fine dust° These products clog the fil-
ters, reduce airflow and can cause damage
to the vacuum cleaner,. Failure to replace
the dust bag could cause permanent dam-
age to the vacuum cleaner.
Do not use the vacuum cleaner to pick up
sharp hard objects, small toys, pins, paper
clips, etc. They may damage the vacuum
cleaner or dust bag.
Proceda siempt
dad antes de e
aspiradora.
ADV
Peligrode cho,
Desconecte la
tenimiento a
podria produci
lesi6n corpora
era imprevista
Si la aspiradorE
ci6n, revise si t_
el filtro est,_ tap
PARA POLVO
MOTOR.
Si la bolsa GIR
est&n libres de
expansible. GirE
manguera expa
del reloj para s_
Manguera
expansible
Cuello
Do not put any objects into openings.
Do not use with any opening blocked; keep
free of dust, tint, hair, and anything that may
reduce air flowo
SAVE THESE
Proper assembly and sa!e use o[ your.vacuum cleaner are your resp.onsibilitieso Your
vacuum cleaner is intenaea Tor Nousenola use. Read this Owner's rvlanual carefully for
important use and safety information. This guide contains safety statements under warn-
ing and caution symbols.
Unplug before connecting Handi-mate Jr.®
You are responsible for making sure that
your vacuum cleaner is not used by anyone
unable to operate it properly_
STRUCT!ONS
4
manguera _
Palanca esca i
manguera
ex{ensi6n
Remueva el ex
expansible del
la manguera, g
arribao
it is important to know your vacuum cleaner's parts and features to assure its proper and safe
use. Review these before using your vacuum cleaner.
Object Style No, Part No. Part No.
in USA in Canada
Headlight Bulb ..... 20-5248 .....
Exhaust Filter EF-! 20-86889 20-40324
Dust Bag 0 20-50690 20-50510
Touch
Control
Telescopic
Wand
Combination------__tllLtk-:_I1!I_
.o°dlo-J / '_ "%_/
Exhaust Ftlter',--_-l!!rt Z"-tl 11 II
A:
Release Lever /
Motor Prolector
(Behind Hose)
iF Dust Bag
[/i ."_.. Furniture
Cover
(Dust Bag
inside)
Crevice
Tool
Agitator_
Pile Height
Adjustment
Headlig
Nozzle
_--//'_ __ --- B-_-_nu, Attachments
'_--\Wa.d (do not store on vacuum cleaner)
Holder o_
FI Wand
Brush
(1
Please pay special attention to these hazard alert boxes, and follow any instructions
& givem WARNING statements alert you to such hazards as fire, electric shock, burns
and personal injury° CAUTION statements alert you to such hazards as personal
injury and/or property damage.
, WARNnNG
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete, Failure
to do so could result in electrical
shock or injury.
Before assembling the vacuum cleaner,
CORD ASSEMBLY
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received all
the components of your new Kenmore
Make sure the quick release upper cord
hook is in the upright position° Remove the
wire tie from the power cord.
vacuum cleaner°
Make sure the
HANDLE ASSEMBLY
Remove the combination brush from
the handle to expose the handle mount-
ing hole.
Remove the handle screw from the body
of the vacuum cleaner.
power cord is
placed into the lock-
ing notch on the
body as shown_ This
helps keep the
power cord out from
under the vacuum
Lockin
Notch
Power
Cord
cleaner agitator.
Position the handle assembly as shown in
the illustration below°
When installing the handle, firmly press
the handle onto the body. Secure with
handle screw provided.
Begin to tighten the screw with your fin-
gers. tt may be necessary to adjust the
handle slightty_
Using a screwdriver, tighten handle screw_
Reinstall combination brush.
Elec trica!
Connection
Handle
Assembly
Handle
Screw
Release
Cord Hook
Cord Plug
Carrying
Handle_ .,-_--,_._.
Wrap the power cord around the quick
release cord hook and the carrying handle.
Lock the power cord plug onto the power
cord.
HANDR-MATE JR.®
For operation of Handi-Mate Jr,@ II_,_! [_
TELESCOPIC WAND
PLACEMENT
see separate
Owner's Manual. . _ _ /
Handi-Mate jr.® _ _"
Handi-MatestorageJr.@ I" _
TO INSERT HANDI-MATE JR ®
Place Handi-Mate Jr2 into the storage
compartment.
Rotate the Handi-Mate Jr2 back until it
snaps into place.
TO REMOVE HANDI'MATE JR2
Rotate Handi-Mate Jr._'out of the storage
compartment°
OPERATING INSTRUCTIONS
PEace the telescopic wand in the wand
holder. Place the crevice tool in the top of
the telescopic wand°
Crevice
Tool
Telescopic
Wand
Wand
Holder
1. Turn the quick
release upper
cord hook to
either side and
down to release
the power cord.
WARNING
,, To reduce the risk of electric shock,
this vacuum cleaner has a polar-
ized plug (one blade is wider than
the other).
,, The plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. if it still does not fit, contact a
qualified technician to install the
proper outlet. Do not change the
2. Detach the
power cord plug Notch
from the power cord
and pull the cord off
the quick release
upper cord hook° Power
Be sure the power
cord is still locked
into the locking notch of the upper cord
hook.
3, Plug the polarized power cord into a t20
Volt outlet located near the floor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
Cord
WARNING
Personal Injury and Product Damage
Hazard
= DO NOT place hands or feet under
the vacuum cleaner at any time.
° DO NOT use outlets above coun-
ters. Damage from cord to items in
surrounding area could occur.
7
CAUTgON
Moving parts! To reduce the risk of personal injury,
DO NOT touch the agitator when vacuum cleaner is
on. Contacting the agitator while it is rotating can
cut, bruise or cause other injuries. Always unplug
from electrical outlet before servicing.
Use caution when operating near children.
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
Note: The agitator does not rotate when the
vacuum cleaner is in the upright position.
MOTOR FUNCTION
Touch
Control Vacuum Cleaner Agitator
Button (Suction) Motor Motor
OFF OFF OFF
CARPET
GENTLE
FLOOR
SUCTION HIGHIMEDtUM/LOW
fnteliCLEAN Variable Power HIGH!LOW/OFF
inteliCLEAN -Turns ON the vacuum
cleaner in inteliCLEAN mode (see
inteliCLEAN section for details)..
SUCTION/TOOLS - Changes the suction
level of the vacuum cleaner motor., tf the
unit is OFF and locked in the upright posi-
tion, pressing the SUCTION button turns
ON only the vacuum cleaner motor to
HIGH for cleaning of most carpets, rugs,
and fabrics. The agitator starts (in HIGH
speed) when the vacuum cleaner is low-
ered into the operating position° Pressing
the SUCTION button cycles the vacuum
cleaner motor through suction levels.
H.M.L = HIGH, MEDIUM, LOW
GENTLEIFLOOR - Turns ON the vacuum
cleaner motor to HIGH suction level and
HIGH .................HIGH to get MEDIUM and LOW suction levels for
HIGH LOW cleaning, press the SUCTION button to
HIGH OFF
\
the agitator motor to LOW speed level for
gentle cleaning of most delicate carpets
and rugs. Pressing the GENTLE/FLOOR
button a second time turns OFF the agita-
tor motor for cleaning bare floors, tn order
cycle the vacuum cleaner motor through
MEDIUM, LOW, and HIGH suction levels
respectively.
CARPET - Turns ON the
vacuum cleaner motor to
HIGH suction level and
the agitator motor to HIGH
speed level for cleaning of
most carpets and rugs., In
order to get MEDIUM and
LOW suction levels for
cleaning, press the SUC..
TION button to cycle the
vacuum cleaner motor
through MEDIUM, LOW,
and HIGH suction levels
respectively.
CLEAN
@
OFF
OFF - Turns OFF vacuum
cleaner.
"Your Kenmore vacuum cleaner is equipped with the latest technology in floor care. The
Kenmore inteliCLEAN automatically chooses the right cleaning power for any cleaning
need. Medium power for everyday pickup, High power for normal dirt, and Maximum
power for deep cleaning high traffic areas°
When inteliCLEAN mode is activated the inteliCLEAN indicator is green.
To turn OFF or de-activate inteliCLEAN press the inteliCLEAN button or TOOLS button.
InteliCLEAN Dirt Sensor
Indicator Lights Green
When there is little or no dirt present the dirt
sensor is green, indicating that inteliCLEAN
power is at MEDIUM. At MEDIUM power the
vacuum cleaner operates at low energy con-
sumption and noise levels.
Motor/Fan Speed
With normal dirt concentration the dirt sen-
sor is amber, indicating that inteliCLEAN
power is at HIGHo Energy consumption
and noise levels increase.
With heavy dirt concentration the dirt sen-
sor is amber and red, indicating that
inteliCLEAN power is at MAXIMUM, The
vacuum cleaner operates at its highest
energy consumption and noise levels.
:_:__::! :!::i_;:ii/_'¸
Motor/Fan Speed _Z_
Motor/Fan Speed _ _U
9
When the vacuum cleaner is running with
normal air flow, the light on the performance
indicator is off. The light comes on whenever
the airflow becomes blocked° If that occurs,
check the disposable dust bag, motor safety
filter and other possible clog locations shown
in CLOG REMOVAL.
NOTE: The light may come on when using
certain attachments, due to reduced airflow
through attachment.
Your Kenmore vacuum cleaner features a
two (2) speed, direct drive agitator for
cleaning a variety of floor surfaces, Please
review the table below before using your
vacuum cleaner,
I.
Do not use the CARPET setting (high
speed) for cleaning berber style car-
pet. The high agitator speed could
damage the carpet or cause excessive
carpet wear.
Touch Control
Setting _
Carpet (1)
Gentle (2)
Floor (3)
To select a pile height setting:
Agitator
s_.__Sp_e2
High
Low
Off
Bare
Floor
Commercial
or Low Pile
2_
Use the GENTLE setting (low speed)
ONLY for berber or delicate pile car-
peting. The agitator may slow down or
stop on thick carpeting, area rugs or
throw rugs. If agitator stops and does
not restart, see AGITATOR MOTOR
OVERLOAD PROTECTOR.
1
The FLOOR setting may be used for
all indoor bare floors including wood,
tile, linoleum, slate etc.
Berber 1 I
or Delicate I ! j Area
Carpet PILP.J.u2hjShag" Rug
V'
Turn off vacuum cleaner, Select a pile
height setting by tilting the cleaner back
until the front wheels are lifted slightly off
the floor.
Slide the adjustment lever to the correct
setting,
There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning (with agitator OFF), and the
HIGH setting for high-pile carpets like
shag carpet, scatter rugs, etc. Use the
other settings as needed for carpet
heights in between.
CAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time
when the agitator is turning. Damage
to carpet may occur.
10
Combination
Bru=h
Carrying
Handle
Extension
Tool
TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
1, Remove the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting, and pulling
straight up.
2. Remove the telescopic wand from the
wand holder°
3. Remove the crevice tool from its stor-
age position in the wand. Turn the lock-
ing ring to the UNLOCK position.
Release Lever
TO USE ATTACHMENTS
Remove the lower end of the extension
hose from the wand holder by grasping the
hose collar, twisting, and pulling straight uF
Rotate the extension hose release lever
down if maximum reach is needed,
_k WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical
shock or personal injury from vacuum
cleaner suddenly starting.
Crevice
Tool
Telescopic
Wand
1, Hose
Collar
Wand
Holder
11
Extend the wand to its full length, Turn the
locking ring to the LOCK position, Attach
the wand onto the open end of the hose°
,_k'_. \Hose Attach floor brush directly to
Suction
Control Slide
Wand
Align the tabs on the wand with the "J"
slots in the hose. Push the wand into the
hose and twist to the right to lock,
Suction
Control
Raised
Tab
Wand
Tool
. extension wand.
_\ "\,_-/-- Teles;opic
Extension _. \\
Wand _.k
Floor _
Brush _J
Use the floor brush for cleaning of floors
or stairs,
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with iow pile and
other delicate items, twist the suction con-
trol slide to the open position. This slide is
located on the telescopic wand, close to
the hose.
Suction
Control This will reduce
suction for ease of
cleaning,
To achieve maximum reach with the
attachments, add the crevice tool to the
end of the wand by inserting and twisting
slightly.
The combination brush can be attached
directly to the wand,
Brush-._ _.
Brush
Holder
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs. Use brush holder with brush for
cleaning loose surfaces such as drapes,
Note: Return suction control slide to the
closed position for normal cleaning.
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching.Trying to reach beyond
the hose stretch capability could cause
the vacuum cleaner to tip over,
12
TO STORE ATTACHMENTS
Remove the combination brush. Snap into
appropriate storage location_
Remove crevice tool from the wand by twist-
ing. Lay aside,
Remove the telescopic wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning the wand locking
ring to the UNLOCK position,
Slide the lower wand into the upper wand,
Turn the wand locking ring to the LOCK posi*
tiono
Place the crevice tool down into the com-
pressed wand. Place the telescopic wand in
the wand holder
.,,;_,,,j; ............
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage or personal injury
could result.
CLEANING AREA
ATTACHMENT Furniture*
CREVICE TOOL v'
coM ..............,
FLOOR BRUSH
Handi-Mate Jr_@ _ v'
* Always clean attachments before using on fabrics. V' = Applicable
** Use the brush holder without the brush for greater suction on furniture cushions or stairs. Use
brush holder with brush for cleaning loose surfaces such as drapes.
Carpet edges
Guide either side or the front of the nozzle
along a baseboard.
Stairs
Set handle in full upright position. Agitator
stops rotating, Use the crevice tool, com-
bination brush or Handi-Mate Jro®,
Unit Tipping
When using the attachments keep the
extension hose release lever in the locked
position when possible, This helps to keep
the vacuum cleaner from tipping over
when stretching the hose. if additional
hose is needed then unlock the release
lever and pull out additional hose. Use
caution not to tip over vacuum cleaner,
Between
Cushions* Drapes* Stairs
J
v'
v'
WARNING
Personal Injury Hazard
Use care if vacuum cleaner is placed on
stairs, If it falls, personal injury or prop-
erty damage could result.
For best cleaning results, keep the airflow
passage clear,
Unplug the vacuum cleaner from the outlet
before checking.
13
Floors
v'
MOTOR PROTECTION
SYSTEM
Motor Protector
This vacuum cleaner has a motor protector
by-pass valve which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. The by-pass valve
opens to prevent motor overheating and
possible damage to the vacuum cleaner.
You will notice a change of sound as air
rushes through the valve opening
To correct problem install a new dust
bag. If using attachments, adjust to
allow for greater air flow.
NOTE: The motor
protector may open
when using
attachments or
when cleaning new
carpet due to
reduced airflow
caused by the
attachments (Behind Hose)
themselves or by
new carpet lint filling
the dust bag quickly. To correct problem
install a new dust bag. If using
attachments, adjust to allow for greater
air flow.
Motor Pro rector
Thermal Protector
This vacuum cleaner has a thermal
protector, which automatically trips to
protect both the vacuum cleaner and the
agitator motor from overheating. If a clog
prevents the normal flow of air to the motor,
the thermal protector turns the motor off
automatically° This allows the motor to cool
in order to prevent possible damage to the
vacuum cleaner°
To correct problem: Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum cleaner to
cool and the thermal protector to reset.
Check for and remove clogs, replace
bag if necessary. See CLOG REMOVAL
section. Also check and replace any
clogged filters.Wait approximately 40-50
minutes before restarting vacuum
cleaner.
AGITATOR MOTOR
OVERLOAD PROTECTOR
The agitator motor has built-in protection
against motor damage should the agitator
jam. if the agitator slows down or stops, the
agitator overload
protector shuts off
the agitator motor,,
The vacuum
cleaner motor will
continue to run°
Agitartor Motor _ I
Reset Button -- _,/_
Note: Do not block motor protector.
To correct
problem: Turn off and unplug vacuum
cleaner, remove obstruction, then press
Agitator Motor reset button.
If the problem persists, have the
vacuum cleaner serviced by a Sears or
other qualified technician,
14
Loading...