Kenmore 11634723402, 11634723401, 11634722402, 11634722401, 11634722400 Owner’s Manual
...
Owner's Manual
Manual Del Propietario
®
Vacuum Cleaner
Aspiradora
Model, Modelo
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this product.
116.34722
116.34723
CUIDADO:
Lea y sigua todas las
instrucciones de operaci6n
y seguridad antes del uso de
este producto.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
Impreso en Mexico
Part No. CO1ZCGY10U00 - KCO1ZCGYZOU0 Printed in Mexico
Before Using Your New Vacuum ....... 2
Kenmore Vacuum Cleaner Warranty ....
Important Safety Instructions ......... 3
Parts and Features .................. 4
Operating Instructions ............... 5
Getting Started ...................... 5
Using Handle ....................... 5
Storing Handle ...................... 5
Cord Assembly ..................... 5
Using Cord Hook .................... 5
Pile Height Selection and Settings ........ 6
On/Off Switch ...................... 6
Releasing the Handle ................. 6
Attachments ....... : ................ 7
Attachment Use Chart ................. 7
Vacuuming Tips .................. 8
Performance Features ............. 8
Please read this guide. It will help you assemble and operate your new Kenmore vacuum in
the safest and most effective way.
For more information about vacuum cleaner care and operation, call your nearest Sears store.
You will need the complete model and serial numbers when requesting information.Your vacu-
um's model and serial numbers are located on the Model and Serial Number Plate.
Vacuum Cleaner Care ................ 9
Vacuum Storage .................... 9
Cleaning Exterior and Attachments ...... 9
Dust Bin Cleaning .................. 10
Dust Bin Assembly .................. 11
Dust Bin Filter Changing/Cleaning ....... 12
Filter Replacement .................. 13
Cleaning Secondary Filter Screen ....... 13
Exhaust Filter Cleaning .............. 13
Replacing Headlight Bulb ............. 14
Belt Changing and Agitator Cleaning . .15,16
Cleaning Exterior ................... 17
Removing Clogs .................... 17
Troubleshooting .................... 18
Requesting service ........ (back page)
Use the space below to record the model number and serial number of your new Kenmore
vacuum.
Model No.
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.
LIMITED ONEYEARWARRANTY ON KENMOREVACUUM CLEANER
This warranty is for one year from the date of purchase, and includes only private household
vacuum cleaner use. During the warranty year, when this vacuum cleaner is operated and
maintained according to the owner's manual instructions, Sears will repair any defects in
material or workmanship free of charge.
This warranty excludes vacuum bags, belts, light bulbs, and filters, which are expendable parts
and become worn during normal use.
For warranty service, return this vacuum cleaner to the nearest Sears Service Center in
the United States.
This warranty applies only while this product is in use in the United States. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179
2
Yoursafety is important to us.To reduce the risk of fire, electrical shock, injury
to persons or damage when using your vacuum cleaner, follow basic safety pre-
cautions including the following:
Read this manual before assembling or
using your vacuum cleaner.
Use your cleaner only as described in
this manual. Use only with Sears recom-
mended attachments.
To reduce the risk of electrical shock -
Do not use outdoors or on wet surfaces.
Disconnect electrical supply before any
servicing or cleaning. Failure to do so
could result in electrical shock or person-
al injury.
Always turn cleaner off before unplug-
ging.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not use with damaged cord or plug.
If cleaner is not working as it should, has
been dropped, damaged, left outdoors,
or dropped into water, return it to a
Sears Service Center.
Do not pull or carry by cord, use cord as
a handle, close door on cord, or pull
cord around sharp edges or corners. Do
not run cleaner over cord. Keep cord
away from heated surfaces.
Do not leave cleaner when plugged in.
Unplug from outlet when not in use and
before servicing.
De not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do not handle plug or cleaner with wet
hands.
Do not put any objects into openings.
Do not use with any opening blocked;
keep free of dust, lint, hair and anything
that may reduce air flow.
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
Do not use cleaner without dust bin
and/or filters in place.
Always clean the dust bin after vacuum-
ing carpet cleaners or freshener, pow-
ders and fine dust. These products clog
the filters, reduce airflow and can cause
damage to the cleaner. Failure to clean
the dust bin could cause permanent
damage to the cleaner.
Do not use the cleaner to pick up sharp
hard objects, small toys, pins, paper
clips, etc. They may damage the cleaner
or dust bin.
Do not pick up anything that is burning
or smoking, such as cigarettes, matches,
or hot ashes.
Do not use cleaner to pick up flammable
or combustible liquids (gasoline, cleaning
fluids, perfumes, etc.), or use in areas
where they may be present. The fumes
from these substances can create a fire
hazard or explosion.
Use extra care when cleaning on stairs.
Do not put on chairs, tables, etc. Keep
on floor.
You are responsible for making sure that
your vacuum cleaner is net used by any-
one unable to operate it properly.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities.Your cleaner
is intended only for household use. Read this Owner's Manual carefully for important use and
safety information. This guide contains safety statements under warning and caution symbols.
Please pay special attention to these boxes and fellow any instructions given. WARNING
statements alert you to such dangers as fire, electrical shock, burns and personal injury. CAU-
TION statements alert you to such dangers as personal injury and/or property damage.
3
Item Part No. Part No.
In U.S. In Canada
Exhaust Filter 20-86880 20-86880
Headlight Bulb 20-5248 20-5248C
Belt 20-5275 20-5275C
It is important to know your vacuum
cleaner's parts and features to assure
its proper and safe use. Review these
before using your cleaner.
ATTACHMENTS
Wends',(l 7
Due
Brush
Release
Button
Motor
Protector
Dusting Brush
Handle
Dust Bin
Crevice Tool
Switch
Release Pedal
(Inside)
Nozzle
Furniture Guard J
4
Uon
Inlet
OPERATING INSTRUCTIONS
USING HANDLE
To release handle; press handle release
button as shown. With release button
depressed rotate handle clockwise to the
operating position. Once handle reaches
the operating position (up) the handle will
automatically lock into place.
{--I
f
Operating _tl° I
Position i,_1
IHandle
Release
Button
NOTE: You should hear a noticeable "click"
sound when handle reaches the operating
position.
NOTE: Make sure the handle is locked in
the operating position before using
vacuum. DO NOT operate vacuum Unless
handle is locked.
Never pun the vacuum cleaner with the
handle in the storage position. The handle
will drag on the floor.
Carrying
Always lift the Handle
vacuum by the
carrying handle when
transporting to storage.
CORD ASSEMB
Make sure the quick release upper cord hook
is in the upright position. Remove the wire tie
from the power cord.
Make sure the power
cord is placed into the
locking notch. This
helps keep the power
cord out from under
the vacuum cleaner
agitator.
Wrap the power cord
around the upper and
lower cord hooks and
lock the power cord
plug onto the power
cord.
\
USING CORD HOOK
STORING HANDLE
To rotate the handle to the storage position
when vacuum is not in use, press handle
release button and rotate handle counter-
clockwise for easy storage.
NOTE: You should hear a noticeable "click"
sound when handle reaches the storage
position.
Detach plug
head from power
cord,
Rotate cord hook
down to release
cord. Return the
cord hook to the
upright position
before
attempting to
rewind the cord.
5
Cord Hook
rHead
SOME MODELS
To select a pile height setting:
Turn off cleaner. Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct
setting,
Models with no selector adjust automatically
for varying carpet heights.
SUGGESTED PILE HEIGHT SETTINGS
You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets.
Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter
rugs
MED: medium to long pile.
LOW: short to medium pile.
EX LOW: very low pile.
Place unit in "HIGH" when using attach-
ments to prevent possible floor damage.
ATTENTION: Special care is required when
vacuuming certain types of carpet or floor
covering. Always check the carpet or floor
covering manufacturer's recommended
cleaning instructions before vacuuming.
Pile Height --X _
Adjustment \._._ _ J LI
WARNING
Personal Injury Hazard
To avoid personal injury, DO NOT
place hands or feet underneath the
unit when changing height setting.
Ensure ON-OFF switch is OFR Plug the
power cord into 120V outlet. ON position
turns vacuum on. OFF position turns
vacuum off.
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
Switch
6
Loading...