Kenmore 1163451290, 1163361191, 1163361190 Owner’s Manual

SEARS
Vacuum Cleaner
OWNER'SMANUAL
READ THIS MANUAL for important safety,
assembly and operating instructions.
WARRANTY ................................................................ I
SERVICE..................................................................... I
IMPORTANT SAFETYINSTRUCTIONS ......................... 2
PARTSAND FEATURES.............................................. 3
ASSEMBLY................................................................. 4
USE
Pile Height Selection and Setting ...................... 6
Bare Floor Setting (Optional) ............................. 6
Releasing the Handle ......................................... 6
Using Attachments ........................................... 7-8
Vacuuming Tips.................................................... 9
Performance Features ....................................... 10
VACUUM CLEANER CARE
Vacuum Cleaner Storage ................................ 11
Cleaning Exterior and Attachments ................ 11
Bag Changing .................................................... 12
Motor Safety Filter Cleaning ............................. 13
Exhaust Filter Cleaning ...................................... 14
Belt Changing and Brush Cleaning ........... 15-17
Clog Removal .................................................... 18
Light Bulb Changing .......................................... 19
Brush Servicing .................................................... 20
Brush Assembly ................................................... 20
TROUBLESHOOTING ................................................ 21
AND OPTIONAL
FEATURES
Usersof upright vacuum cleaners have a varietyi of
cleaning needs. Thisvacuum cleaner comes with optional features
which offer the customer the opportunity to selei:t features which best meet their needs.
This manual provides instructions which include those features in addition to those found on the standard model. Optional features include:
Pre-assembly Power Switch Location
Two Power Levels
Bare Floor Setting Belt Protection System
Performance Indicator
Quick Release Cord Wrap
Noting these feature options now will enable you to instantly identity your model when the instructions
refer to STANDARD or OPTIONAL features, Some models may come with an extra dust bag
and/or belt.
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your cleaner is intended only for household use. The cleaner should be stored in a dry, indoor
area. Read this Owner's Manual carefully for important use and safety information.
KENMOREVACUUMCLEANER
FULLONE-YEARWARRANTY
When used for private household purposesl if within one year from the date of purchase, this vacuum cleaner fails
due to a defect inmaterial or workmanship, RETURNITTO
THENEARESTSEARSSERVICECENTER/DEPARTMENTIN THE
UNITEDSTATES,and Searswill repair it free of charge. If this Vacuum cleaner is used for commercial or rental
purposes, the above warranty coverage applies for only
90 days from the date of purchase. Thiswarranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
i
SEARS,ROEBUCKAND CO., D/817WA
HOFFMAN ESTATES,IL60195
If you need service or parts, visit your local Sears service or parts department. They will be able to solve your problem and supply any needed
replacement parts. Any service needed other th_an described in this Owner s Manual should be don_ by
a Sears authorized service representative. When requesting assistance, parts or service always
give the following information:
1. Model number;
2. Serial number;
3. Problem description;
4. Part number;
5. Name of part.
tMPOR TANTSAFETYINSTRUCTIONS
WARNING
Toreduce the risk of fire, electrical shock, injury to persons or damage when using
your vacuum cleaner, follow basic safety precautions including the following:
Read this manual before assembling or using your vacuum cleaner.
Use your cleaner only as described in this manual. Use only with Sears recommended
attachments.
To reduce the risk of electrical shock, do
not use outdoors or on wet surfaces. Disconnect electrical supply before
servicing or cleaning out brush area, Failure to do so could result in electrical shock or
brush suddenly starting.
Always turn cleaner off before unplugging.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not use with damaged cord or plug. If
cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears Service Center/Department.
Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not run cleaner over cord. Keep cord away from
heated surfaces. Do not leave cleaner when plugged in.
Unplug from outlet when not in use and before servicing.
Do not put any objects into openings. Do not use with any opening blocked; keep
free of dust, lint, hair and anything _hat may reduce air flow.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Do not use cleaner without dust bqg in place. Always change the dust bag after
vacuuming carpet cleaners or fresheners, powders and fine dust. These products Clog
the bag, reduce airflow and can cause the bag to burst. Failure to change could
cause permanent damage to the cleaner. Do not use the cleaner to pick up sharp
hard objects, small toys, pins, paper, etc.
They may damage the cleaner or dust
bag. Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes. Do not use cleaner to pick up flammable or
combustible liquids (gasoline, cleaning fluids, perfumes, etc.), or use in areas where they may be present. The fumes
from these substances can create a fire hazard or explosion.
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do nothandle plug or cleaner with wet
hands,
Use extra care when cleaning on stairS, Do not put on chairs, tables, etc. Keep on floor.
You are responsible for making sure that your vacuum cleaner is not used by
anyone unable to operate it properly.
SAVETHESEINSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilitieS.
Your cleaner isintended only for household use.
Read this Owner's Manual carefully for important use and safety instructions.
2
AND FEATURES
It is important tO know your vacuum cleaner parts and features to assure its proper and safe use.
Review these before using your cleaner.
COPY YOUR MODEL AND SERIAL NUMBERSHERE,
Copy this information from the bottom of the vacuum cleaner into
these spaces. Keep these numbers
for future reference. If you need service or call with a question, hav_ this information ready:
116.
Model Number
UPRIGHTVACUUM CLEANER
Handle -_
On/Off Switch --
O.
Serial Number
Telescoping Wand
_k ReUse
Upper Cord Hook
(Optional) --
Power Cord --
Cord Hook
Upper Cord Hook
Clean-Out Port Cover
Rosdy-to-Use 360 _ Swivel Hose
Belt Protection System Reset
Furniture
Guard
Headlight (Bulb #20-5240)
Height Adjustment
Leve=
Onioffsw_h-----1 I IItL
Release _m_-__
Bag Cove1 (Dust Bag
#20-50688)
_3re _oor
Setting
(Option_)
Indicator (Optional)
Base
Cover
I
Upholstery Tool
Handle
Release Pedal
Dusting Brash
Model/Serial
Four-t0-Oos Stretch Hose
Belt #20-5286
Brash Assembly
HANDLEASSEMBLY
(STANDARD MODEL)
Y
Before assembling your vacuum cleaner be sure you
have all the parts shown.
Electrical Shock Hazard Do not plug into the electrical supply until the
assembly is complete. Failure to do so could result in electrical shock or injury.
Screw Hole
._ _ Opening for Handle
////
Handle
Carry Handle
Screw
Remove the screw located just below the carry handle on the back side of the vacuum.
Position the handle so the cord hooks are toward the
back of the cleaner.
Insert the handle into
the opening at the top of the vacuum.
Align the screw hole in the handle with the
screw hole in the vacuum.
Insert the screw so it
passes through the back of the vacuum
into the handle.
Begin to tighten the screw with your fingers. It may be necessary to adjust the handle slightly.
!
Cord Hooks
-- Screw
Hole
Back of
Vacuum Cleaner
-- Carry Handle
Using a
screwdriver, tighten the
screw.
CAUTION
Do not overtighten. Overlighteningcould stripthe screwholes. Do not operate thecleaner withoutthescrewin
place.
TOSTART
(STANDARD MODEL)
Unwrap the power cord. Plug the power cord into a
120 volt outlet located near the floor.
(OPTIONAL MODEL)
1. Turn the quick release cord hook to either side and
down to release the power cord.
CORD ASSEMBLY
(STANDARDAND OPTIONALMODELS)
Make sure the quick release
upper cord hook isin the upright position.
Remove the wire tie from the
power cord Wrap the power
cord around the upper and lower
cord hooks.
2. Once the cord is removed, lock the
cord into place by .... forcing it into the locking notch on the body of the
cord hook as shown,
3. Plug power cord into a 120-volt outlet located near the floor,
WARNING
PersonalInjuryandProductDamage Hazard
DO NOTplug inifswitchisinON position.Personal injuryor damage could result.
DO NOTuse outletsabove counters. Damage to itemsinsurroundingarea could occur.
5
HEIGHT
FLOOR
SELECTIONAND
SETTING
To select a pile height setting:
Turn off the cleaner. Select a pile height setting by
tilting the cleaner back until the front wheels are lifted slightly off the floor.
Slide the height adjustment lever to the correct setting,
--High
SETTING
(OPTIONAL MODEL)
TOselect the bare floor setting:
Turn off the cleaner. Tiltthe cleaner back until the front wheels are liftea
slightly off the floor, Slide the height adjustment lever to the bare floor
sefting.
SUGGESTEDPILEHEIGHT SETTINGS
You may need to raise the height to make some jobs easier (such as scatter rugs and longer pile carpets). Suggested settings are:
EX LO or AUTO: very Io pile, LOW: short or medium pile. MED: medium to long pile. HIGH: shag carpet, long pile, plush, scatter rugs.
WARNING
Personal Injury Hazard DO NOTplace hands or feet underneath the unit
when changing from the bare floor setting to the carpet pile height setting. The brush assembly begins
to revolve rapidly when the vacuum isturned on and isswitched to a carpet height setting.
In this position, the headlight isoff and the brush assembly does not revolve. Thissetting is recom- mended for cleaning hardwood and tile floors,
THE
HANDLE
Release the handle by
pressing on the handle
release pedal.
Loading...
+ 16 hidden pages