Kenmore 11629915900, 11629914901, 11629914900 Owner’s Manual

Use & Care Guide
Manual de Uso y Cuidado
Vacuum Cleaner
Aspiradora
Model, Modelo
t16.29914
116.29915
IMPORTANT
For..replacementparts,please contact:
Sears Partsand Repair Center
(1-800-4MY-HOME)
(1-800-469_4663)
Anytime, day or night
(USA. and Canada)
For anyother issue, pleasecontact:
Vacuum Cleaner Help Line
(1-877-531-7321)
8:00am-5:00pmEST,M-F
(U.SA and Canada)
CAUTION: Read and follow all
safety and operating instructionsbefore first
use of this product,.
Sears, Roebuck and Co., Hoffman Estates, tL 60179 U.S.A.
www,sears.corn
Part No. COtZDGU10UOO-KC01ZDGUZOUO
CtJlDADO:
Lea y siga todaslas instrucciones de operaci6n
y seguddad antes del uso de este producto_
Printed in Mexico
Impreso en M6xico
Before Using Your New
Vacuum Cleaner ................... 2
Packing List ............................ 2
Kenmore Vacuum Cleaner Warranty. ,3
Important Safety Instructions ....... 4
Parts and Features .................. 5-6
Assembly Instructions .............. 7-8
Pet PowerMate _ Storage .............. 8
Operating Instructions ................. 9
How to Start ....................... 9-10
Vacuuming Tips .................... 10-1t
Suggested Pile Height Settings ........ I1
Attachments ....................... 12
Attachment Use Table ................ t3
Performance Features ............. t3-15
Canister Care ........................ 15
Removing Clogs .................. t5
Bag Changing ........................ t6
Cleaning Extedor and Attachments ....... I7
Motor Safety Filler Changing .......... t7
Exhaust Filter Changing ............. !8
PowerMate _ Care ....................... t9
Belt Changing and Agitator Cleaning 19-20
Bulb Changing ........................ 2I
Dirt Sensor .......................... 22
Agitator Servicing ..................... 23
Troubleshooting ............. 24-25
Master Protection Agreements ....... 26
Requesting Assistance
Or Service ..................... Back Cover
Please read this guide, It will help you assemble and operate your new Kenmore vacuum
cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your nearest Sears
store. You will need the complete model and serial numbers when requesting information, "four vacuum cleaner's model and serial numbers are located on the Model and Serial
Number Plate, Use the space below to record the model number and serial number of your new Kenmore
vacuum cleaner,
Model No,,
Serial No,
Date of Purchase Keep this book and your sales check (receipt) in a safe place for future reference,,
PACKING LIST ]
Your KENMORE VACUUM CLEANER is packaged with the following parts and compo-
nents assembled separately in the carton:
1 Canister Vacuum Cleaner I Combination Brush* i PowerMate® 1 Pet PowerMate®
1 Hose Assembly 1 Telescoping Wand 1 Floor Brush* 1 Use & Care Guide
I Crevice Toot* 1 Parts List
Each of the above assemblies are shown in detail inside the Repair Parts List, *These items are found under the Tool Cover,,
OneYearLimitedWarranty
Whenassembled,operatedandmaintainedaccordingtoallinstructionssuppliedwith
theproduct,ifthisvacuumcleanerfailsduetoadefectinmaterialorworkmanshipwithin oneyearfromthedateofpurchase,returnittoanySearsstore,SearsParts&Repair CenterorotherKenmoreoutletforfreerepair._
Ifthisvacuumcleanerisusedforotherthanprivatefamilypurposes,thiswarranty appliesforonly90daysfromthedateofpurchase°
This warranty covers only defects in material and workmanship, Sears will NOT
pay for:
1=,Expendable items that can wear out from normal use, including but not limited to
filters, bells, light bulbs, and bags..
2. A service technician to instruct the user in correct product assembly, operation or maintenanca..
3.. A service technician to clean or maintain this product..
4o Damage to or failure of this product if it is not assembled, operated or maintained
according to all ins_Jctions supplied with the product..
5_ Damage to or failure of this product resulting from accident, abuse, misuse or use for
other than its intended purpose..
6, Damage to or failure of this product caused by the use of detergents, cleaners,
chemicals or utensils other than those recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this producL
Disclaimer of implied warranties; limitation of remedies Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein.. Implied warranties, including warranties of merchantability or fitness
for a particular purpose, are limited to one year or the shortest period allowed by law.
Sears shall not be liable for incidental or consequential damages._ Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you
This warranty applies only while this vacuum cleaner is used in the United States and
Canada_
This warranty gives you specific legal dghts, and you may also have other rights which vary from state to state.,
Sears, Roebuck and Coo, Hoffman Estates, IL 60179
Sears Canada Inc.., Toronto. Ontario, Canada M5B 2B8
Read all instructions in this manual before assembling or ustng your vacuum cleaner_
WARNmNG
Your safety is important to us_,To reduce the risk of fire, electrical shock,
injur_y to persons or damage when usin_q your vacuum cleaner, follow {oasic
satety precautions including the following:
Use your vacuum cleaner only as descdbed in this manual.. Use only with Sears recommended attachments..
Disconnect electrical supply before servicing or cleaning out brush area.
Failure to do so could result in electrical shock or brush suddenly starting.. Do not leave vacuum cleaner when plugged in.. Unplug from outlet when not in
use and before servicing. To reduce the dsk of electrical shock - Do
not use outdoors or on wet surfaces Do not allow to be used as a toy. Close
attention is necessary when used by or near children.
Do not use with damaged cord or plug. if vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears
Service Center. Do not pull or carry by cord, use cord as a
handle, close door on cord, or putt cord around sharp edges or comers Do not run vacuum cleaner over cord.. Keep cord away
from heated surfaces. Do not unplug by pulling on cord To
unplug, grasp the plug, not the cord Do not handle plug orvacuum cleaner with
wet hands
Do not put any objects into openings.. Do not use with any opening blocked; keep
free of dust, tint, hair and anything that may reduce airf ow..
Keep hair, loose clothing, t_ngers,and all parts of body away from openings and moving parts
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.. Do not put on chairs, tables, etc. Keep on
floor.
Do not use vacuum cleaner to pick up
flammable or combustible liquids (gasoline,
cleaning fluids, perfumes, etc), or use in areas where they may be present. The
fumes from these substances can create a fire hazard or explosion
Do not pick up anything that is buming or smoking, such as cigarettes, matches, or
hot ashes.. Do not use vacuum cleaner without dust
bag andlor filters in place
Always change the dust bag after vacuuming carpet cleaners or freshener,
powders and fine dust. These products clog the bag, reduce airflow and can cause the bag to burst.. Failure to change bag could cause permanent damage to the vacuum
cleaner_ Do not use the vacuum cleaner to pick up
sharp hard objects, small toys, pins, paper clips, etc They may damage the vacuum cleaner or dust bag
Do not operate vacuum cleaner without the exhaust filter or exhaust filter door in place (If applicable)_
The hose contains electrical wires Do not use when damaged, cut, or punctured..
Replace ifcut or worn Do not pick up sharp objects..
Always turn off and unplug the vacuum cleaner before connecting or disconnecting either hose, Handi-Mate Jr..® (if applicable),
or nozzle Hold plug when rewinding onto cord reel.
Do not allow plug to whip when rewinding.
You are responsible for making sure that
your vacuum cleaner is not used by anyone unable to operate it properly
SAVE THESE iNSTRUCTiONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities., "Yourvacuum cleaner is intended for Household use, Read t,51s Use & Care Guide
carefully for important use and safety information. This guide contains safety statements under warning and caution symbols.
4
Itis important to know your vacuum cleaner's parts and features to ensure its proper and safe
use_Review these before using your vacuum cleaner,
PowerMate
Part No. Part No.
Object Style No. in USA in Canada
Belt CB-3 20_5218 2040118
Headlight Bulb .... 20-5248 20.40601
Handle Quick
Release Button
Telescoping Wand
Wand Length
Adjust Button..--,. 1
Wand Light---_ _
Headlight and Lens
Wand Quick Release
HOSE
3-Way On/Off Switch
Electronic
Suction Control
Off/Floor/Carpet
ATTACHMENTS
Crevice Tool -_ _
Handle
Floor
Brush _ _
Hose SwiveJ
CANISTER
Part No, Part No.
Object Style No. in USA in Canada
Dust Bag Q 20,,50557 ..... 20:50410
Exhaust Filter EF-1 20-86889 2040324 Motor Safety Filter CF-1 20:86883 2040321
Cord
Rewind
Button
Tool Storage Cover CHECK BAG (Attachment Indicator
Stora
Canister
Storage Cover
t
Pet PowerMate
Cord
Hood
Carr_
Dust Bag
_--_ExhaustFilter Cover
\
Motor Safety Filter (Behind Dust Bag)
(NotShown)
Please pay special attention to these hazard alert boxes, and follow any instruc- tions given. WARNING statements atert you to such dangers as fire, electric
shock, burns and personal injury. CAUTION statements alert you to such dangers as personal injury and/or property damage.
WARNING
Electrical Shock Hazard DO NOT plug into electrical supply until
assembly is complete. Failure to do so could result in electrical shock or
injury.
Before assembling vacuum cleaner, check the PACKING LIST_.Use this listto
verify that you have received all the com- ponents of your new Kenmore vacuum
cleanest.
WAN D-TELESCOPING
The wand length I J is adjustable and ,)
requires no assembly, To adjust, simply push down on the wand adjust but-
ton and slide the Wand upper wand to Adjust
the desired Burro. height,
#
Length
- Keep Hand
Above
Handfe_
Handle Quick
Release Button.----_
Wand Length
Adjust Button
I,II,,U,U,I,,H,U,HI,,U,UUlU,II,Ul,i UUl% ,IllUl
When adjusting the wand length you may have to hold the PowerMate with your hand
or foot.
Wand
Swivel_..\_
tl
_' The swivel, located on
the PowerMate, allows you
L to turn the handle
to theleft or right side
_-- lo reach farther under
low furniture
PowerMate
Insert wand into PowerMate until the wand button snaps into place.
Toremove: Step on wand release pedal, then pull up on wand
B m
Button
CANISTER
I,, Open the canister hood.
2, Check to see that the dust bag is properly installed See BAG CHANGING for
instructions
3, Check to see that the motor safety filter is
properly installed, See MOTOR SAFETY FILTER CHANGING for instructions,
HOOD AND TOOL STORAGE COVER
It is normal for the canister hood and tool storage cover to come off when opened
further than needed, Line up the hinge slots,
insert the hinges into the slots, and close the hood and tool storage cover to reinstall
ii ill i i
kCAUTION
Never open canister hood with the tool storage cover open, This will help to prevent damage from occurring to the canister hood and/or tool storage cover°
HOSE
1. Line up the hose latch tab and notch
in canister hood and insert hose into canister until it
snaps into place
To remove: Do not open hood before
removing hose, With hood closed, depress hose latch tab and pull upward on hose,
To store: Disconnect hose from wand and canister to prevent stress on hose during
storage. Store hose in a loosely coiled position so the hose covering is not stressed°
,.,o,. )J
2. Insert handle into wand until lock button
snaps in place, Be sure hose is
not twisted
To remove:
Press handle quick release
button and pull up on handle,
This canister is equipped with an on-board storage area for a Pet PowerMate
attachment.,
To Install:
Open the Pet PowerMate storage cover Insert the Pet PowerMate, press down into place, and close the lid securely,
To Remove:
Open the storage cover, Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and ATTACHMENT USE TABLE)_
Pet PowerMate Storage Cover._.
CAUTION
Moving parts] To reduce the risk of personal injury, _F_...____2_i_ DO NOT touch the agitator when vacuum cleaner is _'_,
on. Contacting the agitator while it is rotating can __/_/_ cut, bruise or cause other injuries., Always turn off
and unplug from electrical outlet before servicing,, Use caution when operating near children.
HOW TO START
i
i illl i illl
kWARNING
Personal Injury and Product Damage Hazard
DO NOT plug in if switch is in ON position, Personal injury or property
damage could result° The cord moves rapidly when
rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury,_
DO NOT use outlets above counters°
Damage from cord to items in surrounding area could occur.
Cord
Rewind Button.
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug willfit in a potadzed outlet only one way, tf the plug does not fit fully in the outlet, reverse the piugo If it still does not fit, con- tact a qualified electrician to install the prop- er outtet, Do not change the plug inany way,
2. Plug the polarized power cord into a 120 Volt outlet located near the floor,
1. Pull cord out of canister to
desired length., The cord will not
rewind until the cord rewind but-
tonis pushed,
To rewind: Turn
off and unplug the
vacuum cleaner.
Hold the plug while rewinding to pre- vent damage or injury'from the moving cord, Push
cord rewind button,, 3oLower wand from upright position by
pressing on the handle release pedal,
rift/ j_
t_ I f_ Pile Height
Release L_
Pedal
4,,Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the rear of the PowerMate, The pile height setting
shows on the indicator,, See SUGGESTED PILE HEIGHT SETTINGS,
Attention: Refer to your carpet manufac- turers cleaning recommendations Some more delicate carpets may require that they be vacuumed with the PowerMate agitator turned off 1oprevent carpet damage,
5oSelectapositiononthehandlethree-way On/Offswitch.
IJ
NOTE - When this switch is in the FLOOR position, the wand light, nozzle headlight
and dirt sensor DO NOT function since no electricity flows to the PowerMale.
Suggested sweeping pattern.
For best cleaning action, the PowerMate should be pushed straight away from you and pulled straight back. At the end of each
pull stroke, the direction of the PowerMate should be changed to point into the next
section to be cleaned.. This pattern should
be continued across the carpet with stow, gliding motions,,
OFF FLOOR - turns on the
canister motor only CARPET - turns on
both the canister and the PowerMate
motors°
VACUUMING TIPS
CAUTION
DO NOT leave the PowerMate running in one spot in the upright position for
any length of time. Damage to carpet
may occur.
kCAUTION
Product Damage Hazard Use care if the PowerMate and wand is left in the upright position as it may tip over easily. Property damage can occur
if tipped.
The nozzle swivel
rotates left and
right for improved
maneuvering in
tight spaces and
around corners,
NOTE: Fast, jerky
strokes do not provide complete
cleaning,,
, kWARNING
Personal injury and Product Damage Hazard
DO NOT run over power cord with PowerMate. Personal injury or
product damage could result, DO NOT pull plug from wall by
the power cord. If there is damage to the cord or plug, personal injury or property damage could result,
The hose swivel allows the hose to turn
without moving the canister This is _,_1_/_,_
helpful for cleaning in small areas. Check ,f_r "_,"
hose for twisting before pulling canister,
10
Carpeted stairs suction need to be Control
For best cleaning results, use HIGH
vacuumed regularly. _ setting on electronic
suction control. NOTE: Be sure r----7
the mechanical suction control located on the handle is closed for maximum
cleaning powe_ I 1 _
, WARNING
Personal Injury Hazard Use care if canister is placed on stairs°
It may fall, causing personal injury or
property damage.
CAUTION
Product Damage Hazard Do not pull on the hose to move the
canister from one stair to the next. When finished cleaning in one area use
the handle grip on the canister to move the vacuum cleaner to a new location
for further cleaning.
The stair grip located on the caster will aid
in preventing the canister from
slipping when used on stairs (see
PERFORMANCE FEATURES).
NOTE'. Be sure the canister is resting securely on the stairs and the caster is in a locked position before using,
For best cleaning results, keep the airflow passage open Check each assembly area in REMOVING CLOGS occasionally for clogs_ Turn off and
unplug vacuum cleaner from outlet before checking.
%
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO setting, However, you may need to raise the
height to make some jobs easier, such as scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from shutting off, Suggested settings are:
HI - Shag, deep pile, or scatter rugs,. MED - Medium to deep pile,, LO - Low to medium pile, XLO - Most carpets and bare floors,,
ti
i
i i
ATTACHMENTS I
_CAUTION
DO NOT attach or remove handle or wands while vacuum cleaner is ON.
This could cause sparking and damage the electrical contacts or electronic
controls.
_,-_ Wand
Quick
l]l Release
Pedal
2oPress wand quick release
pedaI with foot and pull the wand straight up and out
of PowerMate
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is
attached, turn
vacuum cleaner
off before
removing handle
from wand..
1. Press handle
quick release
button and pull 1_
up on handle,
Handle Quick rm= Release_,-
2, Slide attachments firmly on handle as
needed. See ATTACHMENT USE
TABLE.
_ _- Handle
Button -_,
ATTACHMENTS ON WAND ,,_
i_ To remove : _ "_../_}"_ wand from , i ,_, ,i,¢-,Y
PowerMate, :_ _.1_/"
lock wand in i_- _-_ ,"_
straight-up )_ _ ";.,'
3_Put attach- ments on wand as needed See
ATTACHMENT
USE TABLE.
DUSTING BRUSH
To assemble ,' . Brush
insert the fabric..
dusting,bi'us,h'
brush inta'_he/ t _ nozzfe,_3nd,'press Fabric
into@lace', Brush
" Dusting
Toremove, press latch
and lift out..
Latch
position. _._ _"'
12
ATTACHMENT USE TABLE
CLEANING AREA
ATTACHMENT Furniture1 Cushions1 DrapesI Stairs Floors :[0ors/Rugs W_lls
Between Bare Carpeted
Combination t_rusn v' V' V'
Brush Fabric
Crevice Tool V V
Dust!ng _'_
Brush V V
I
FiOOrBrush i
PowerMate' "' ','_,.1, ............................. i .
Handi-MateJr._:_ V'
Pet PowerMate3,4 _ V v'
1, Always clean attachments before using on fabrics
2 3-way OnlOff switch should be in FLOOR position, 3 Some Models; Handi-mate Jr® and Pet PowerMate attachment instructions are included
with the products
4. Pet PowerMate can only be used on the hose handle
PERFORMANCE FEATURES
kWARNING
Personal Injury Hazard
Always turn off and unplug the vacuum
cleaner before cleaning the agitator area
as agitator may suddenly restart,
Failure to do so can result in personal injury.
EDGE CLEANER
Active brush edge cleaners are on both
sides of the
PowerMate. Guide either side of the
PowerMate along
baseboards or next to furniture to help
remove dirt trapped at carpet edges
OVERLOAD PROTECTOR
The PowerMate has built-in protection against
motor and belt Reset damage should
the agitator jam. If the agitator slows down or stops, the overload protector
shuts off the PowerMate and
the red light will come on. The
canister motor will continue to run, To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then press BELT RESET button..
If the problem persists, have the
vacuum cleaner serviced by a Sears or other qualified service agent..
13
Overload Protector/
Belt Reset
STAIR GRIP
During normal operation while the canister is in the horizontal position, the caster wheel
freely 360°,
In o r to prevent
the nister from
1stairs, _GRIPthe
feat
the
posi
can 25=
to V,
Wl
The light can be used for lighting hard to
reach locations
ally locks
wheel in
,henthe
raised
_odzontal
_osition.
LIGHT
Thisvacuum cfeaneris equipped with a light on the
extension wand. This light
wil! operate only when the vacuum cleaner is in
CARPET mode (see HOW TO START). The light will operate when attached or
not attached to the PowerMate
CHECK BAG INDICATOR
When the vacuum CHECKBAG
cleaner is running Indicator_ __
with normal airflow, _._"
theC.ECKBAG !'Q-Z.q-.. ;.
light is off,, The ./" "_. -- light comes on // _ _
whenever the /// f.._. /,
airflowbecomes _I! I_ "_'_t \ blocked. Ifthat 9_rs, fifskF.heck the''_'- disposable dus[_o'ag., Then check the
motor safety _ilterand other possible/.// clog Iocations_s_hown in REMOVING"
CLOGS..
To correct problem: See the TROUBLE-
SHOOTING table,,
NOTE: The lightmay come on when using certain attachments, due to reduced airi]ow through attachment,
ELECTRONIC SUCTION
CONTROL
The electronic suction control allows you to change the power of the vacuum cleaner
suction motor
LOW POWER
Increase
Suction
.I
Decrease
Suction
1
decreases suction for draperies and
lightweight rugs_ HIGH increases
suction for
upholsteries and
carpets_
MECHANICAL SUCTION CONTROL
The mechanical suction control allows you to adjust the vacuum suction for very light
fabrics,
Opening the control decreases
suction white closing the
control increases Suction suction.
Suction
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automaticalfy trips to protect
the vacuum cleaner from overheating, If a
Hog prevents the normal flow of air to the
m_otor,the thermal protector turns the motor off automatically, This allows the motor to cool in order to prevent possible
damage to the vacuum cleaner,.
OcuOrrect problem: Tum off and unplug
um cleaner to allow the vacuum
cleaner to cool and the thermal protector
to reset., Check for and remove clogs, if
necessap.,-t,Also check and replace any clogged filters,, Wait approximately
thirty (30) minutes and plug the vacuum
cleaner in and turn back on to see if the motor protector has reseL
t4
DIRT SENSOR
The DIRT SENSOR
light system is mount-
ed on the PowerMate
nozzle near the reset
button. It consists of a
series of two red lights
and two green lights..
The lights give you an indicationofthe amount
of dirt particles that are passing through the
sensor on its way to the dust bag..
INITIAL START UP
When the PowerMate is first started, the fol-
lowing light sequence occurs in a two-second
time frame:
IoTwo reds come on.
2. Two greens are on and wi]l remain on until
the PowerMate nozzle is placed in use_
NOTE: if the nozzle ison a surface thathas
dirt on it, dirt will be picked up by the vacuum
cleaner and the red lights might slay on
DIRT
SENsoR...._.
IN OPERATION When the PowerMate is being moved back
and forth on the floor, the lightswillchange from one configuration to another as dirt is
being vacuumed..As long as the red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning.
When the green lights stay on as the
PowerMate is moved back and forth over an
area, the sensor is not seeing enough dirt to warrant further cleaning of that area.
NOTE: Dirt sensor lights DO NOT function in the FLOOR setting
REMOVING CLOGS
The vacuum cleaner creates suction that
picks up dirt.. Rapidly moving air carries the ,i'f/_._.'_._
dirt to the dust bag through the airflow pas- //).,_
sages. The dust bag lets the air pass ,/_._/'
through, while it traps the dirt_ ////
For best cleaning results, keep the airflow ,,,_>_y t
passage openr Check the starred areas ..,_'._" [,
occasio.allyfoFclogs,Turnoffand #/ li
unplug vacuum cleaner from outlet ..___/
before checking __//
15
I
Motor
BAG CHANGING j
For best cleaning results, the dust bag should be changed often.. The CHECK BAG
indicator will come on when the bag needs to be changed or the airflow is blocked..
NOTE: See PARTS AND FEATURES for Bag Number
t. Turn off and unplug vacuum cleaner.
2. Remove hose from canister,
Hood Release.
4. Disengage cardboard tab from
red bag mount by pulling away and lifting up..
5. Pull bag out of the red bag mount.
3, Pull hood release out and up,
then lift canister hood.
6oCheck the motor safety filter
and replace, if necessar!..
Note: DO NOT bend or crease the
middle of the cardboard when installing the bag into the bag mount slots.
8. Rotate red bag mount down and
install bag into slots per illustration, pushing down until
the cardboard tab locks into position
and the holes align.
9, Tuck the bag securely into the bag cavity so that none of the bag is able to be pinched
by the hood. 10, Close and latch canister hood
11. Insert hose into canister until it snaps in place
t2,. Plug cord into wall outlet.
, CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener,
face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag
and cause it to burst before it is full and may cause damage to vacuum
cleaner motor° Change bag more often when vacuuming these materials.
7. The red bag mount will flip forward after removing bag. This will prevent the hood from closing until a new bag is installed.
t6
Loading...
+ 36 hidden pages