Kenmore 116.28614, 116.28615, 28614 - Canister Vacuum, 28615 - Canister Vacuum Owner's Manual
Owner's Manual
Manual Del Propietario
Vacuum Cleaner
Aspiradora
Model, Modelo
116.28614
116.28615
IMPORTANT
Before returning this product-
For replacement parts, please contact:
Sears Parts and Repair Center
(1=800-488=1222)
Anytime, day or night
(U.S.A..only)
For any other is.sue,please contact:
Vacuum Cleaner Help Line
(1-877-531-7321)
8:00am-5:00pm EST, M_F
(USoA, and Canada)
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this producL
CUIDADO:
Lea y siga todas tas
instrucciones de operaci6n
y seguridad antes del uso de
este product&
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
Part No. C01ZDHFOOU00-KC01ZDHFZOU0
HewA
Printed in Mexico
Impreso en M6xico
Before Using '(our New
Vacuum Cleaner ................... 2
Packing List ........................ 2
Kenmore Vacuum Cleaner Warranty .... 3
Important Safety Instructions ............ 4
Parts and Features ..................... 5-6
Assembly Instructions ............... 7-8
Pet PowerMate ®Storage ................. 8
Operating Instructions ................. 9
How to Start ............................. 9
Vacuuming Tips ...................... 10
Attachments .............................. 11
Attachment Use Table .................. I2
Suggested Pile Height Settings ........ I3
Performance Features ................. 13
How Your Vacuum Cleaner Works ......... 14
Canister Care .......................... 15
Bag Changing ........................ 15
Cleaning Exterior and Attachments ..... 15
Motor Safety Filter Changing .......... t6
Exhaust Filter Changing .................. 16
PowerMate e Care ..................... 17
Belt Changing and Agitator Cleaning ,, 17-18
Light Bulb Changing .................. 18
Agitator Servicing ................... 19
Troubleshooting ....................... 20
Master Protection Agreements ........ 21
Notes ..................................... 22
Requesting Assistance
Or Service ..................... Back Cover
Please read this guide, It will help you assemble and operate your new Kenmore vacuum
cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your nearest Sears store_
You will need the complete model and serial numbers when requesting information. Your vacu-
um cleaner's model and serial numbers are located on the Model and Serial Number Plate°
Use the space below to record the model number and serial number of your new Kenmore
vacuum cleaner,
Model No.
Serial No..
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.
PACKING LIST
'four KENMORE VACUUM CLEANER is packaged with the following parts and compo-
nents assembled separately in the carton:
I Canister Vacuum Cleaner 1 Combination Brush*
1 Power-Mate ® 1 Telescoping Wand
1 Hose Assembly 1 Pet Power-Mate ®
1 Floor Brush* 1 Owner's Manual
1 Crevice Tool* 1 Parts List
Each of the above assemblies are shown in detail inside the repair parts list.
*These items are found under the Tool Cover,
One"fearLimitedWarranty
Whenassembled,operatedandmaintainedaccordingtoall instructionssuppliedwith
theproduct,if thisvacuumcleanerfailsduetoadefectin materialorworkmanshipwithin
oneyearfrom thedateof purchase,returnit to anySearsstore,SearsParts&Repair
CenterorotherKenmoreoutletforfree repair,
if thisvacuumcleanerisusedforotherthanprivatefamilypurposes,thiswarranty
appliesforonly90daysfromthe dateofpurchase.
This warranty covers only defects in material and workmanship. Sears will NOT
pay for:
1_ Expendable items that can wear out from normal use, including but not limited to
filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product assembly, operation or
maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not assembled, operated or maintained
according to all instructions supplied with the producL
5.. Damage to or failure of this product resulting from accident, abuse, misuse or use for
other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners,
chemicals or utensils other than those recommended in all instructions supplied with
the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications
made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair
as provided herein.. Implied warranties, including warranties of merchantability or fitness
for a particular purpose, are limited to one year or the shortest period allowed by law.
Sears shall not be liable for incidental or consequential damages_ Some states and
provinces do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on the duration of implied warranties of merchantability or fitness, so these
exclusions or limitations may not apply to you.
This warranty applies only while this vacuum cleaner is used in the United States and
Canada.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co°, Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8
Read all instructions in this manual before assembling or using your vacuum cleaner,
WARNI G
Your safety is important to us. To reduce the risk of fire, electrical shock,
injury to persons or damage when usin 9 your vacuum cleaner, follow basic
safe_y precautions including the following:
Use your vacuum cleaner only as
described in this manual° Use only with
Sears recommended attachments,.
Disconnect electrical supply before
servicing or cleaning out brush area.
Failure to do so could result in electrical
shock or brush suddenly starting_
Do not leave vacuum cleaner when
plugged ino Unplug from outlet when not in
use and before servicing
To reduce the risk of electrical shock - Do
not use outdoors or on wet surfaces.
Do not alfow to be used as a toy Close
attention is necessary when used by or
near children,
Do not use with damaged cord or plug. If
vacuum cleaner is not working as it should,
has been dropped, damaged, left outdoors,
or dropped into water, return it to a Sears
Service Center
Do not pull or carry by cord, use cord as a
handle, close door on cord, or pull cord
around sharp edges or corners. Do not run
vacuum cleaner over cord. Keep cord away
from heated surfaces.
Do not unplug by puliing on cord. To
unplug, grasp the plug, not the cord.
Do not handle plug or vacuum cleaner with
wet hands.
Do not put any objects into openings,
Do not use with any opening blocked; keep
free of dust, lint, hair and anything that may
reduce airflow
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts_
Turn off all controls before unplugging.
Use extra care when cleaning on stairs. Do
not put on chairs, tables, etc. Keep on
floor.
Do not use vacuum cleaner to pick up
flammable or combustible liquids (gasoline,
cleaning fluids, perfumes, etco),or use in
areas where they may be present. The
fumes from these substances can create a
fire hazard or explosion.
Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes°
Do not use vacuum cleaner without dust
bag andlor fillers in place,,
Always change the dust bag after
vacuuming carpet cleaners or freshener,
powders and fine dust. These products clog
the bag, reduce airflow and can cause the
bag to bursL Failure to change bag could
cause permanent damage to the vacuum
cleaner_
Do not use the vacuum cleaner to pick up
sharp hard objects, small toys, pins, paper
clips, etc. They may damage the vacuum
cleaner or dust bag.
Do not operate vacuum cleaner without the
exhaust filter or exhaust filter door in place
(If applicable)_
The hose contains electrical wires Do not
use when damaged, cut, or punctured_
Replace if cut or worn. Do not pick up
sharp objects.
Always turn off and unplug the vacuum
cleaner before connecting or disconnecting
either hose, HandFMate Jr,® (if applicable),
or nozzle
Hold plug when rewinding onto cord reelo
Do not allow plug to whip when rewinding
You are responsible for making sure that
your vacuum cleaner is not used by anyone
unable to operate it properly.
SAVE TH E iNSTRUCTiONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities.
Your vacuum cleaner is intended for Household use. Read this Owner's Manual
carefully for important use and safety information. This guide contains safety
statements under warning and caution symbols°
4
it isimportantto knowyourvacuumcleaner'spartsandfeaturesto ensureitsproperandsafe
userReviewthesebeforeusingyourvacuumcleaner,
PartNo. PartNo.
Object StyleNo. in USA inCanada
HeadlightBulb .... 20-5240 20-40600
Belt CB*3 20-5218 20-40118
PowerMate
Telescoping
Wand
Flange
Wand Quick
Release Pedal
(Not Shown)
Handle
Quick
Release
Button
Wand
Length
Adjust
Button
Belt
and Lens
Pile Height Indicator
Pile
Height
Handle
Release Pedal
PowerMate
Model/Serial Number
(On Bottom)
5
Protector/Belt
Reset Button
Cleaner
(Not Shown)
HOSE
3-Way OnlOff Switch
(OfflFIoorlCarpet)
Handle
ATTACHMENTS
Crevice
Tool _.
Floor
Brush
Combination
Brush
Pet Po _werMate
I t
' _ Dusting
1
Brush _,
I
€
I |
t
f _ Fabric
Brush
Hose Swivel
CANISTER
Part No. Part No.
Object Style No. in USA in Canada
Dust Bag Q 20-50557 20-50410
Exhaust Filter EF-1 20-86889 20-40324
Motor Safety Filter CF-I 20-86883 20-40321
Cord
Pet PowerMate
Storage cover
Exhaust Filter Cover
(Not Shown)
_ Cord
Dust Bag
\
Motor Safety Filter
(Behind Dust Bag)
Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury, CAUTION statements alert you to such dangers
as personal injury and/or property damage.
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or
injury.
Before assembling vacuum cleaner, check
the PACKING LIST. Use this list to verify
that you have received all the components of
your new Kenmore vacuum cleaner.
WAND-TELESCOPING
The wand length is
adjustable and __2
requires no
assembly. To
adjust, simply
push down on the
wand, ju, bo.oo
and slide the
upper wand to the Wand
Length
desired height Adjust
Button
The swivel, located
'_J"*'-Keep
Hand
Above
This
Tab
u
m
Wand
on the PowerMate,
allows you to turn
the handle to the left
side to reach farther
under low furniture.
When adjusting the
wand length you
may have to hold the
PowerMate with your
hand or foot,
POVVERMATE
insert wand into PowerMate until the wand
button snaps into peace.
To remove: Step on wand release pedal,
then pull up on wands..
Lock
Button
Handle
Quick --
Release o
Button
_jl
Telescoping
Wand
N
U
-- Wand Length
"1 Adjust Buiton
=_---- Wand
__ Button
}uick
Release Pedal
i_?& __
CANISTER
1, Open the canister hood,,
2. Check to see that the dust bag is proper-
ty installed. See BAG CHANGING for
instructions.,
3. Check to see that the motor safety filter is
properly installed, See MOTOR SAFETY
FILTER CHANGING for instructions.,
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool
storage cover to come off when opened fur-
ther than needed. Line up the hinge slots,
insert the hinges into the slots, and close
the hood and tool storage cover to reinstaE
CAUTION
Never open canister hood with the tool
storage cover open. This will help to
prevent damage from occurring to the
canister hood and/or tool storage cover.
HOSE
1. Line up the hose
latch tab and notch
in canister hood
and insert hose
into canister until it
snaps in place.
To remove: Lift
hose latch tab
upward and pull up
on hose_
Hose
Latch
Tab
Notch
Handle
Lock
Button
Handle
Quick
2. Insert handle
into wand until
lock button
snaps in place
Be sure hose
is not twisted.
To remove:
Press handle
quick release
button and pull
up on handle_
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage° Store hose in a loosely coiled
position so the hose covering is not
stressed.
This canister is equipped with an on-board
storage area for a Pet PowerMate
attachment.
To Install:
Open the Pet PowerMate storage cover.
Insert the Pet PowerMate, press down into
place, and close the lid securely.
To Remove:
Open the storage cover. Remove Pet
PowerMate from the storage area and use
as needed (see ATTACHMENTS and
ATTACHMENT USE TABLE)°
Pet PowerMate
Storage Cover
/
CAUTION
Moving partsl To reduce the risk of personal injury,
DO NOT touch the agitator when vacuum cleaner is
on. Contacting the agitator while it is rotating can
cut, bruise or cause other injuries. Always turn of
and 1Jnplug from electrical outlet before servicing.
Use caution when operating near children.
HOW TO START
Cord
Rewind
Button _ _
1, Pull cord out
of canister to
desired length_
The cord will
not rewind until
the cord rewind
button is
pushed,
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other, This plug
will fit in a polarized outlet only one way, If
the plug does not fit fully in the outlet,
reverse the plug if it still does not fit, con-
tact a qualified electrician to install the prop-
er outleL Do not change the plug in any
way,
2. Plug the polarized power cord into a 120
Volt outlet located near the floor,
To rewind: Turn off
and unplug the vac-
uum cleaner. Hold
the plug while
rewinding to prevent
damage or injury
from the moving -,_
cord. Push cord
rewind button.
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or property
damage could result.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
Height _ U[_
Pedal -__
Handle(_,. "_UI{'TK"'
Rpeeled_se.__
__ ile Height
Indicator
3. Lower wand from upright position by
]ressing on the handle release pedal°
CAUTnON
DO NOT leave the PowerMate
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
u :: ++.++_+.+++_++.++o+++++
4, Select a pile height setting by pressing
the small pedal on the rear of the
PowerMate+ The pile height setting shows
on the indicator+ See SUGGESTED PILE
HEIGHT SETTINGS.
Attention: Refer to your carpet manufac-
turers cleaning recommendations+ Some
more delicate carpets may require that they
be vacuumed with the PowerMate agitator
turned off to prevent carpet damage+
ARPET
OFF
5. Select a switch posi-
tion on the handle.
FLOOR - turns on the canister motor onlyo
CARPET - turns on both the canister and
the PowerMate motors+
NOTE -When this switch is in the FLOOR
position, the headlight DOES NOT function
since no electricity flows to the PowerMate+
VACUUMING TIPS
I
Suggested sweeping pattern.
For best cleaning action, the PowerMate
should be pushed straight away from you
and pulled straight back. At the end of each
pull stroke, the direction of the PowerMate
should be changed to point into the next
section to be cleaned. This pattern should
be continued across the carpet with slow,
gliding motions°
NOTE: Fast,
jerky strokes do
not provide
complete clean-
ing.
The hose swivel
allows the hose to
turn without moving
the canister. This is
helpful for cleaning in
small areas. Check
hose for twisting
before pulling canister.
CAUTION
Product Damage Hazard
Use care if the PowerMate and wand is
left in the upright position as it may tip
over easily. Property damage can occur
if tipped.
WARNING
Personal Injury and Product Damage
Hazard
=
• DO NOT run over power cord with
PowerMate. Personal injury or
product damage could result.
DO NOT pull plug from wall by
the power cord. If there is damage to
the cord or plug, personal injury or
property damage could result.
Carpeted stairs
need to be
vacuumed regularly+
For best cleaning
results, fully close
the suction control.
Suction
10
WARNING
Personal Injury Hazard
Use care if canister is placed on stairs.
It may fall, causing personal injury or
propert y damage. .........
CAUTION
Product Damage Hazard
Do not pull on the hose to move the
canister from one stair to the next,
When finished cleaning in one area
use the handle grip on the canister to
move the vacuum cleaner to a new
location for further cleaning.
The stair grip located
on the caster will aid
in preventing the
canister from
slipping when used
on stairs (see
PERFORMANCE
FEATURES),
NOTE: Be sure the canister is resting
securely on the stairs and the caster is in a
locked position before using_
For best cleaning results, keep the .......................
airflow passage open_ Check each _:'_._!,
assembly area in HOWYOURVACUUM _i_'_;_
CLEANER WORKS occasionally for clogso _,._._,...._
Turn off and unplug vacuum cleaner _Z:,_;_;,
from outlet before checking_ _:__'_!i
ATTACHMENTS
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is
attached, turn
vacuum cleaR-
er off before
removing han-
dle from
wands.
1. Press han-
dle quick
release button
and pull up on
handle.
Lock
Button--_
Hand/e
Quick
Retease--_
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON,
This could cause sparking and damage
the electrical contacts.
2. Slide attachments
firmly on handle as
needed. See ATTACH-
MENT USE TABLE
NOTE:
To assemble
dusting brush
insert the fabric
brush into the
dusting brush
nozzle and press
into place,
Fabric
Brush
Latch
Dusting
Brush
\
To remove,
press latch
and lift out°
1
It
ATTACHMENTS ON WAND
1.To IJl
remove lim
wand from
PowerMate,
lock wand in
straight*up
position,
Wand
,Quick
Release
Pedal
2. Press wand quick
release pedal with foot
and pull the wand
straight up and out of
PowerMate,
3. Put attach-
ments on wand
as needed. See
ATTACHMENT
USE TABLE.
ATTACHMENT USE TABLE
CLEANING AREA
Bare
Drapes1 Stairs Floors
4
Between
ATTACHMENT Furniture 1 Cushions 1
Dusting I@_
Combination brush 4
brush Fabric
brush 4 4
Crevice tool 4 4
Floor
brush _ 4
PowerMate L:_
i ........... i ..........
4 4
Handi-Mate
Jr22
Pet PowerMate3,4 4 4
Carpeted
Floors/Rugs
/
4 2 #
Waits
4
4
! *LAlways clean attachments before using on fabrics,
2, 3-way OnlOff switch should be in FLOOR position,
3, Some Models; Handi-mate Jr,® and Pet PowerMate attachment instructions are included
with the products,
4o Pet PowerMate can only be used on the hose handleo
12
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting° However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off, Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED - Medium to deep pile.
LO - Low to medium pile,
XLO - Most carpets and bare floors.
J
PERFORMANCE FEATURES
OVERLOAD PROTECTOR
The PowerMate has Overload Protector/
built-in protection Bert Reset Button
against motor and
belt damage should
the agitator jam. If
the agitator slows
down or stops, the
overload protector
shuts off the PowerMate. The canister motor
will continue to run.
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press BELT RESET button° A ball point
pen may be required.
If the problem persists, have the
vacuum cleaner serviced by a Sears or
other qualified service agent.
EDGE CLEANER
Active brush edge
cleaners are on both
sides of the
PowerMate. Guide
either side of the
PowerMate along
base-boards or next to
furniture to help
remove dirt trapped at
carpet edges.
_LJL _ I ! I II Uil[!,ll! iii .... !!,! L_!U _!,,,,,, ,,,
WARNING
Personal Injury Hazard
Always turn off and unplug the
vacuum cleaner before cleaning the
agitator area as agitator may
suddenly restart, Failure to do so
can result in personal injury.
PERFORMANCE INDICATOR
When the vacuum
_.._ /--" Performance
cleaner is running _'/___tndlcator
with normal airflow, _"..._
the light on the
performance
indicator is off. The
light comes on
whenever the
airflow becomes blocked. If that occurs,
check the disposable dust bag, motor
safety fi_ter and other possible clog
locations shown in HOW YOUR VACUUM
CLEANER WORKS.
To correct problem: See the TROUBLE-
SHOOTING table.
NOTE: The light may come on when using
certain attachments, due to reduced airflow
through attachment.
13
SUCTION CONTROL
The suction
control atlows
you to change
the vacuum
suction for
different fabrics suction
and carpet
weights. Opening the control decreases
suction for draperies and lightweight rugs,
while closing the control increases suction
for upholsteries and carpets.
Suction
THERMALPROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to protect
the vacuum cleaner from overheating° If a
clog prevents the normal flow of air to the
motor, the thermal protector turns the
motor off automatically This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.
To correct problem: Turn the vacuum
cleaner off and unplug the power cord
from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reset. Check for and remove clogs, if
necessary. Also check and replace any
clogged filters. Wait approximately
thirty (30) minutes and plug the vacuum
cleaner in and turn back on to see if the
motor protector has reset.
POWERMATE STORAGE
The wand has a "U" shaped
flange that slides into
the "U" shaped slot on
the canister, "_
The flange allows the
wands and PowerMate
to be stored with the
canister to conserve
storage space. The
canister must be
stored on end for this
feature to be used_
To attach the PowerMate, it must be in the
flat position as shown in the illustration. Use
the handle release pedal to place it in this
position.
The wand will slip out of the slot as it is lifted
up for use and will slide into the slot as it is
lowered for storage.
STAIR GRIP
During normal operation while the canister is
in the horizontal position, the caster wheel
rotates freely 360 °
The Stair Grip
feature allows
the caster
wheel to lock in
position when
the vacuum
cleaner is
rotated 25 °
from horizontal into a vertical position in
order for the canister to rest on stairs
HOW YOUR VACUUM CLEANER WORKS !
The vacuum cleaner creates suction that
picks up dirt° Rapidly moving air carries the
dirt to the dust bag through the airflow pas-
sages_ The dust bag lets the air pass
through, while it traps the dirt.
For best cleaning results, keep the air-
flow passage open Check the starred Motor
areas occasionally for clogs. Turn off Safety
and unplug vacuum cleaner from Filter Exhaust
outlet before checking. . \ Filter
14
Loading...