Filter: Cleaning And Replacement... 14-15
Transporting And Storing
Troubleshooting
Requesting Service
.......................................
.......................
..................
.................
13-14
...................
{back page)
13
15
16
BEFORE USING YOUR NEW ALL SURFACE FLOOR CLEANER
Please read this guide. It will help you assemble and operate your new Kenmore All
Surface Floor Cleaner in the safest and most effective way.
For more information about All Surface Floor Cleaner care and operation, call your nearest
Sears store. You will need the complete model and serial numbers when requesting
information. Your All Surface Floor Cleaner's model and serial numbers are located on
the Model and Serial Number Plate.
Use the space below to record the model number and serial number of your new
Kenmore All Surface Floor Cleaner.
Model No.______________________________________________
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.
______________________
KENMORE ALL SURFACE FLOOR CLEANER WARRANTY
ONE YEAR FULL WARRANTY ON KENMORE ALL SURFACE FLOOR CLEANER
This warranty is for one year from the date of purchase, and includes only private household
All Surface Floor Cleaner use. During the warranty year, when this All Surface Floor
Cleaner is operated and maintained according to the owner's manual instructions, Sears
will repair any defects in material or workmanship free of charge.
For warranty service, return this All Surface Floor Cleaner to the nearest Sears
Service Center in the United States.
This warranty applies only while this product Is in use in the United States. This warranty
gives you specific legal rights, and you may also have other rights which vary from state
to state.
Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179
IMPORTANT SAFETY INSTRUCTIONS
Your safety is important to us. To
A
WARNING
reduce the risk of fire, eiectrical
shock, injury to persons or damage
when using your aii surface floor
cleaner, follow basic safety
precautions including the foilowing:
Connect to a properly grounded
outlet only. See Grounding
Instructions.
Do not leave appliance when
plugged in. Unplug from outlet
when not in use and before
servicing.
To reduce the risk of electric
shock, use indoors only. Do not
immerse. Use only on surface
moistened by cleaning process
or small spills. A small spill is
considered to be less than one
gallon and less than 1/8 inch
deep.
To reduce the risk of fire: Do not
use a flammable or combustible
liquid to clean floor.
Do not allow to be used as a toy.
Close attention is necessary
when used by or near children.
Use only as described in this
manual.
Do not pull or carry by cord,
use cord as handle, close a
door on a cord, or pull cord
around sharp edges or corners.
Do not run appliance over
cord. Keep cord away from
heated surfaces.
Do not unplug by pulling on
cord. To unplug, grasp the plug,
not the cord.
Do not handle plug or appliance
with wet hands.
Do not put any objects into
openings. Do not use with any
opening blocked; keep free of
dust, lint, hair, and anything that
may reduce air flow.
Keep hair, loose clothing, fingers,
and all parts of body away from
openings and moving parts.
Do not pick up anything that is
burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use with damaged cord or
plug. If appliance is not working
as it should, has been dropped,
damaged, left outdoors, or
dropped into water, return it to a
service center for inspection.
Call 1-800-488-1222 or visit our
website at
locate the nearest service center.
www.sears.com to
Do not use without dirty water
reservoir and filter assembly in
place.
Turn off all controls before
unplugging.
Do not use to pick-up flammable
or combustible liquids, such as
gasoline, or use in areas where
they may be present.
IMPORTANT SAFETY INSTRUCTIONS
CONTINUED
Keep the Ail Surface Floor
Cleaner on the floor. Do not use
on stairs.
Do not use an extension cord
with this All Surface Floor
Cleaner.
Store the All Surface Floor
Cleaner indoors. Put All Surface
Floor Cleaner away after use to
prevent tripping accidents.
Using improper voltage may
result in damage to the motor
and possible injury to the user.
Proper voltage is listed on the
cleaner plate.
Use only with Kenmore® Hard
Floor Concentrate Cleaner or
Kenmore® Carpet & Upholstery
Concentrate Cleaner.
Always install float before any
wet pick-up operation. NOTE:
The float is part of the filter
assembly inside the dirty water
tank. See page 15 for installation
instructions.
WARNING: The cords, wires,
and/or cables supplied with this
product contains chemicals,
including lead or lead
compounds, known to the state
of California to cause cancer and
birth defects or other reproductive
harm. Wash hands after using.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your all surface floor cleaner are your
responsibilities. Your all surface floor cleaner is intended only for
Household use. Read this Owner's Manual carefully for important
use and safety information. This guide contains safety statements
under warning and caution symbols. Please pay special attention to
these boxes and follow any instructions given.
PARTS AND FEATURES
It is important to know your All Surface Floor Cleaner's parts and features to assure its
proper and safe use. Review these before using your All Surface Floor Cleaner.
Solution Trigger
Quick cord
Upper Handle
Brush On/Off
Switch
release
I
Power
cord
Carry
handle
Carpet
nozzle
(green)
»
Brushroll
reset button
Main Body
Tank-ln-Tank~_
System Latch
Tank-in-Tank'
System Handle
Nozzle lock
Hard floor
nozzle
(tangerine)
Power Wheels
OnlOff
Switch
Nozzle setting indicator
Nozzle Base
Nozzle
storage
holster
Wheels
Handle
release
pedal
A
Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such dangers as
fire, electric shock, burns and personal injury. CAUTION statements alert
you to such dangerous personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly Is
complete. Failure to do so could
result in electrical shock or
injury.
Before assembling the All Surface Floor
Cleaner, check the PACKING LIST on the
cover of the separate REPAIR PARTS
LIST. Use this list to verify that you have
received all the components of your new
Kenmore All Surface Floor Cleaner.
HANDLE ASSEMBLY
Attach upper handle to main body of
cleaner.
A
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the All Surface
Floor Cleaner without the
screws in place.
Secure with 4 screws provided as shown.
CORD ASSEMBLY
Wrap cord around quick cord release and
lower cord clip for storage.
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.