Kenmore 110.8756*, 110.8757*, 110.8758*, 110.9756*, 110.9757* Quick Reference Guide
...
Continued on back
W10035070B
Quick Start Dryer Guide
We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer.
Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME®(1-800-469-4663).
CHECK LINT SCREEN
ESTIMATED TIME REMAINING
Models/Modelos 110.8756*, 8757*, 8758*, 9756*, 9757*, 9758*, 8856*, 8857*, 8859*, 9856*, 9857*, 9858*
START
1. Clean the lint screen.
2. Place laundry in dryer.
3. Shut the door.
4. Press POWER.
5. Select Auto Cycle,
• Turn cycle knob to recommended Auto Cycle for type
of load being dried.
• Temperatures cannot be adjusted on auto cycles.
or select Timed Dry Cycle.
• Turn cycle knob to Timed Dry.
• Select drying time using More Time or Less Time buttons.
• Select temperature setting using Temperature button.
6. Select OPTIONS.
• To be alerted when cycle is complete, select the
End of Cycle Signal.
• To help keep wrinkles from setting in after drying is
complete, select Wrinkle Guard
®
.
7. Press and hold the START button.
This feature is a reminder to check to see whether the
lint screen needs to be cleaned. The Check Lint Screen
light will come on when the machine is turned on. The light
will flash until the cycle is started or the door is opened, and
then the light will turn off.
A preset time is displayed when an automatic cycle is
selected. During the first few minutes of the drying
process, the cycle time may automatically vary from the
preset time based on the size and fabric type of the load.
Toward the end of the drying process, the estimated time
display will adjust again, showing the final drying time. For
timed dry cycles, this time will count down from the start of
the cycle.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
TROUBLESHOOTING –
LONG DRY TIMES, LOAD NOT DRYING
Is the lint screen clogged with lint?
• Clean the lint screen before each load.
Is the exhaust vent or outside exhaust hood
clogged with lint?
• Lint should be cleaned out of the exhaust vent at
least once every 2 years.
See the Use and Care Guide for complete details.
W10035070B
1/08
© 2008 Sears Brands, LLC
®
Registered Trademark / TMTrademark / SMService Mark of Sears Brands, LLC
Printed in U.S.A
CYCLE SELECTOR (TIMER) CONTROL
Automatic Cycles
Automatic Cycles may be used for most loads. These cycles
give the optimal drying in the shortest time. Drying time varies
according to the type of fabric, size of the load and dryness
setting.
Automatic Drying Cycles
All Auto Cycles are preset to NORMAL DRY, which is good for
most fabrics. At the end of the cycle, you may check the
dryness of the load.
• If the load is drier than you like, you may select the Less Dry
setting the next time you dry a similar load.
• If a load is not as dry as you like, you may complete drying
using a Timed cycle. You may select the More Dry setting the
next time you dry a similar load.
Auto Moisture Sensing
Dryness is determined by an electronic sensor that “feels” the
amount of moisture in clothes as they pass over it. When the
dryness selected is reached, the dryer goes into a cool down
period of up to 10 minutes.
Timed Dry
This cycle may be used to get up to 80 - 90 minutes (depending on
the model) of heated drying time. The heating portion of the cycle is
followed by a cool down period of up to 10 minutes. Both time and
temperature levels can be adjusted.
Express Dry™
This cycle may be used for drying small loads that need a short
drying time. This setting provides 23 minutes of heated tumbling
with a cool down period.
Touch Up
This cycle may be used to help smooth synthetic and permanent
press clothes that are clean and dry, but wrinkled from being in
storage. This setting provides about 20 minutes of heated tumbling
followed by a cool down period of up to 10 minutes.
OPTIONS
Options allow you to customize your cycle.
WRINKLE GUARD®90
WRINKLE GUARD®90 helps avoid wrinkles that form when clothes are
not removed promptly at the end of a cycle. WRINKLE GUARD®90
periodically starts and stops the dryer, tumbling the load without heat for
90 minutes unless you open the dryer door.
During WRINKLE GUARD
®
90, the End of Cycle Signal will sound every
5 minutes unless the signal is turned off.
End of Cycle Signal Control
When selected, the End of Cycle Signal sounds when a cycle is
complete.
Dryer Rack
The dryer rack may be used to machine dry items you would not
necessarily want to tumble dry or that you would normally line dry. This
feature is to be used with Timed Dry cycles only. Items containing foam,
rubber, or plastic must be dried on a clothesline or by using the Air Only
temperature setting.
AUTO CYCLES PRESET SETTINGS
AUTO CYCLES
LOAD TYPE
TEMPERATURE
TIME*
(Minutes)
HEAVY DUTY
Heavyweight mixed loads,
towels
High 45
JEANS
Denim pants, jackets
Medium High 55
NORMAL
Sheets, corduroys,
sturdy work clothes
Medium 40
CASUAL
Permanent press, synthetics,
casual business clothes
Low 35
DELICATE
Lingerie, blouses
Extra Low 30
*Estimated Time with Auto Dry Level (Normal) setting.
Time will vary depending on load type and load size.
TIMED CYCLES PRESET SETTINGS
TIMED CYCLES
LOAD TYPE
TEMPERATURE
PRESET
TIME
(Minutes)
TIMED DRY
Heavyweight, bulky items,
bedspreads, work clothes
High 40
EXPRESS DRY™
Small loads
High 23
TOUCH UP
Helps to smooth out wrinkles
Medium High 20
Before you call service...
check for the following.
Loading...