Kenmore 11097468800, 11097468100, 11096468800, 11096468100 Owner’s Manual
m
!
S_ AIIS =o==o,==.v°o,===
l l
!
END-OF-CYCLE
SIGNAL FEATURE
i
OPERATING STATUS
KEYS
I
I
I
!
i
BUNT SCREEN
I _F_'Y DOOR
swrrcH
l_ PERFORMANCE
GUIDELABEL
O MODEL NO. PLATE
, i
!
I
!
I
!
!
If you need SERVICE or PARTS for your Kenmore dryer:
Be ready to give your Sears Service Department the model number, sedal number and date of
purchase. Write in below. The plate IM with model and serial numbers is located behind the
dryer door.
.1=10.
MODEL NO. SERIAL NO.
M
I
DATE OF PURCHASE
ELECTRIC
MODEL 64681
GAS
MODEL 74681
How to dry a load of laundry
b_ Clean lint screen before each load. (_ Set Cycle Selector Control I!
thePUtdoor.laundryinto dryer and shut _) PUsh the Start Control Il! to start
t-_ I r-2_ I_Qmwz lmP
Ill Cycle Selector Control
Use this control to select the proper drying method forthe type of
items in the load. The controlcan be set for Automatic or Timed
Drying, Touch Up or Air. You can turnthe control at any time to
make drying time longer or shorteror you can turnthe control to
an OFF position to shutthe dryer off.
OPERATING STATUS KEYS
Color coordinated keys indicate in which portion of the cycle the
dryer is operating.
your dryer.
El Start Control
Use this control to startthe dryer after cycle is selected. Be sure
the door is closed.
Opening the door stops the dryer. It will not start again until you
close the door and push the START control. Be sure the Cycle
Selector Control is on a dry setting.
--_ Remove load when dry.
Ill End-of-Cycle Signal
This signal buzzes to tell you the drying cycle is over. The dryer
should be unloaded as soon as the cycle is over to get the best
wrinkle free results.
During Wrinkle Guard Ithe buzzer will sound every 5 minutes.
Part No. 3392333
Loading...