Kenmore 11079832800, 11079822800, 11069832800, 11069822800 Owner’s Manual

We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME ®(1-800-469-4663).

Models/Modelos 110.7/6982#, 7/6983_, 7/6984_

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

Clean the lint screen.

Place laundry in dryer.

Select Auto Moisture Sensing Plus Cycle,

• Turn cycle knob to recommended Auto Moisture Sensing Plus Cycle for type of load being dried.

• Use Normal Dry to dry most heavy to medium-weight fabrics.

Shut the door.

• Select temperature setting using Fabric Care selector.

The End of Cycle Signal sounds when a cycle is complete. This signal is helpful when you are drying permanent press, synthetics, and other

items that should be removed from the dryer promptly at the end of a cycle.

,aT £11/F 8?8k£ SlllRk 801WRIk

he variable control lets you select a volume anywhere from Off to Loud.

e WRINKLE GUARD ®feature is on, the End of Cycle Signal sounds every few minutes. If the End of Cycle Signal is turned off, you will not hear

INKLE GUARD .'®sound every few minutes.

W10035735A

Fire Hazard

No washer can completely remove oil. Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in

death or fire.

or Timed Dry Cycle.

• Turn cycle knob to Timed Dry.

• Select temperature setting using Fabric Care selector. Select the End of Cycle Signal. Select the WRINKLE GUAREP feature.

Press and hold the PUSH TO START button.

Continued on back

FaBRI88aRE881TR@L

For models with a Fabric Care control knob, you may use this control to select the drying temperature that matches the fabrics in your load.

The following table lists suggested auto moisture or timed dry settings for various loads. This is only a guide.

FABRIC CAREiTEMP CONTROL LOAD TYPE CYCLES SETTING TIMED DRY

AIR FLUFF Rubber, plastic, heat-sensitive fabrics Timed Dry 20-50

NO HEAT minutes ULTRA DELICATE Lightweight items - lingerie, blouses, dresses, Auto Moisture Sensing Plus 20-40

EXTRA LOW synthetics, and blends Less Dry minutes CASUAL Medium-weight items - synthetics (polyester, Auto Moisture Sensing Plus 30-50

MEDIUM acrylic), skirts, sweaters, slacks Normal Dry minutes NORMAL Medium-weight items - shirts, sheets, slacks, Auto Moisture Sensing Plus 30-50

MEDIUM HIGH play clothes, cloth diapers Normal Dry minutes Co'IrON/TOWELS Heavyweight items - quilts, towels, jeans, Auto Moisture Sensing Plus 50-70

HIGH cottons, bedspreads More Dry minutes *Reset time as needed to allow items completely.

SETTING*

IIIIl IIIIITII (TIIII} IIITIII

Auto Moisture Sensing Plus

And Even Heat TM

Even Heat TM improves drying performance with Auto Moisture

Sensing Plus, which advances the cycle as moisture is extracted from clothing. A thermistor (electronic temperature sensor) and moisture sensing strips in the dryer drum help measure the amount of moisture

in the clothes as they tumble. An electronic control determines the

load type to help save time, avoid overdrying, and increase the accuracy of the end dryness level. Auto Moisture Sensing Plus takes the guesswork out of drying time and enhances fabric care.

Ifthe load is drier than you like, you may select a setting closer to Less

Dry the next time you dry a similar load. If a load is not as dry as you

like, you may complete drying using a Timed cycle. You may also select a setting closer to More Drythe next time you dry a similar load.

The WRINKLE GUAREP feature helps smooth out wrinkles that may form when clothes are not removed promptly at the end of the cycle.

During WRINKLE GUARD ®III, the load will periodically stop and start for up to 90 minutes, without heat. WRINKLE GUARD ®III has a selectable

WRIIRL£llaRl III 1

n/Off option. If the knob is set to Off, the dryer stops after cool down and may be unloaded.

TE: The End of Cycle Signal will sound during the WRINKLE GUARD ®feature. Ifthe End of Cycle Signal is turned to Off, no signal will sound.

Timed Dry

This cycle may be used to get up to 90 minutes of heated drying time. The heating cycle is followed by a cool down period of up to

10 minutes.

Touch Up

This cycle may be used to help smooth synthetic and permanent press clothes that are clean but wrinkled from being crowded in a closet or suitcase. This setting provides about 20 minutes of heated tumbling followed by a cool down period of up to 10 minutes.

TIIIILESIIITINI - LIII IIY TIMES,LIAI NSTIIYINI

Before you call service...check for the following.

Is the lint screen clogged with lint?

• Clean the lint screen before each load.

W10035735A 8/o8

Is the exhaust vent or outside exhaust hood clogged with lint?

• Lint should be cleaned out of the exhaust vent at least once every 2 years.

See the Use and Care Guide for complete details.

+ 2 hidden pages