Kenmore 110C71492310, 110C62102310, 110C61492310, 11075202311, 11075202310 Owner’s Manual

...

Use & Care Guide Manual de uso y cuidado

Guide d'Utilisation et d'Entretien

English / Espa_ol / Fran_ais

Table of Contents / indice / Table des mafi_res ......4

Models/Modelos/Mod?_les: 60102, 70102, 62102, 72102, 65202, 75203, 65102, 75102, C62102, C61492, C71492

5 ectric

S6cneuse 61ectrique

P/N WI0562356B Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A. www.kenmore.com

www.sears,com Sears Canada Inc.

Toronto, Ontario, Canada MSB 2C3 www0sears.ca

DRYER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediateb! follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING - ...i.kofFi,o..

= Clothes dryer installation must be performed by a qualified installer,

- Install the clothes dryer according to the manufacturer's instructions and local codes. = Do not install a clothes dryer with flexible plastic venting materials or fle×ible metal

(foil type} duct. if flexible metal duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting

materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.

= To reduce the risk of severe injury or death, follow all installation instructions. = Save these instructions.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm,

iMPORTANT: When discarding or storing your old clothes dryer, remove the door.

IMPORTANT SAFETY INSTRUCTIONS

WARNING." To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer. [] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry- cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment. [] Do not reach into the dryer if the drum is moving. [] Do not install or store the dryer where it will be exposed

to the weather. [] Do not tamper with controls.

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load. [] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust, and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See "Electrical Requirements" located in the installation

instructions for grounding instructions.

SAVE THESE INSTRUCTIONS

WARNING: For your safety, the information in this manual must be followed to minimize I the risk of fire or explosion, or to prevent property damage, personal injury, or death. |

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building, or area of all occupants.

• immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• if you cannot reach your gas supplier, call the fire department.

- installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier. If a gas leak is detected, follow the "What to do if you smell gas" instructions.

Table of Contents

DRYER SAFETY ..................................... 2

CHECK YOUR VENT SYSTEM

FOR GOOD AIR FLOW ..................... 4

USE AUTO MOISTURE SENSINGTM/ AUTO DRY CYCLES FOR BETTER

FABRIC CARE AND ENERGY

SAVINGS ............................................... 4

CONTROL PANEL

AND FEATURES .................................... 5

CYCLE GUIDE ....................................... 6

USING YOUR DRYER .......................... 7

DRYER CARE ......................................... 9

TROUBLESHOOTING ......................... 11

PROTECTION AGREEMENTS'. .........13

WARRANTY ......................................... 13

ASSISTANCE OR

SERVICE ............................... Back Cover

CHECK YOUR VENT SYSTEM FOR GOOD AiR FLOW

{ndice

SEGURIDAD

DE LA SECADORA ...........................14

REVISEQUE EL SISTEMA DE VENTILACION TENGA

UN BUEN FLUJO DE AIRE................16

USE LOS CICLOS AUTO MOISTURE SENSING TM (Detecci6n autom6tica

de humedad)/AUTO DRY (Secado autom6tico) PARA UN MEJOR

CUIDADO DE LASTELAS Y AHORRO

DE ENERG{A.......................................16

PANEL DE CONTROL

Y CA RACTERISTICAS.......................17

GUIA DE CICLOS ..............................18

USO DE LA SECADORA .................19

CUIDADO DE LA SECADORA......... 21

SOLUCI6N DE PROBLEMAS...........23

CONTRATOS DE PROTECCI6N .....25

GARANTIA ........................................25

AYUDA O SERVICIO

TECNICO ......................Contraportada

fMaintain good air flow by:

[] Cleaning your lint screen before each load. [] Replacing plastic or foil vent material with 4" (102 mm)

diameter heavy, rigid vent material.

Table des mati_res

SECURITE DE LA S_:CHEUSE............ 26

VERiFiCATiON D'UNE CiRCULATiON D'AIR ADEQUATE

POUR LE SYSTEME

D_EVACUATION ................................. 28

UTILISATION DES PROGRAMMES AUTOMATIQUES POUR UN MEILLEUR SOIN DU TISSU ET

DAVANTAGE D'_:CONOMIES

D'ENERGIE .......................................... 28

TABLEAU DE COMMANDE

ET CARACTERISTIQUES ................... 29

GUIDE DE PROGRAMME ............... 30

UTILISATION DE LA SECHEUSE .......31

ENTRETIEN DE LA SF:CHEUSE ......... 33

D_:PANNAGE ...................................... 35

CONTRATS DE PROTECTION ........ 37

GARANTIE ......................................... 37

ASSISTANCE

OU SERVICE .......... Couverture arri_re

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent. Do not use a metal foil vent,

Failure to follow these instructions can result in death

or fire.

Good Air Flow

Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See "installation instructions".

The venting system attached to the dryer plays a big role in good air flow.

Service calls caused by improper venting are not covered by the warranty and wiii be paid by the customer, regardless

of who installed the dryer.

USE AUTO MOISTURE SENSINGTM/AUTO DRY CYCLES FOR

BETTER FABRIC CARE AND ENERGY SAVINGS

[] Using the shortest length of vent possible. [] Using no more than four 90 ° elbows in a vent system;

each bend and curve reduces air flow.

...........................Bet

[] Removing lint and debris from the exhaust hood. [] Removing lint from the entire length of the vent system

at least every 2 years. When cleaning is complete,

be sure to follow the "Installation Instructions" supplied

with your dryer for final product check.

[] Clearing away items from the front the dryer.

Use the Auto Moisture SensingTM!Auto Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Auto Moisture SensingTM!Auto Dry cycles, drying air temperature and moisture level are sensed in the load. This sensing

occurs throughout the drying cycle and the dryer shuts off: when the load reaches the selected dryness. Choose Normal cycle to save energy.

With Timed cycle, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over- drying. Use Timed cycle for the occasional damp load that needs a little more drying time or when using the drying rack.

Air Only

6o Timed Dry

!o 40

,e 30

20 _Touch Up

CONTROL

PANEL AND FEATURES

Off On High Off On

Wrinkle Guard Dry Temp Push to S_art

Medium CYCLE SIGNAL

Cotton

Not all features and options are available on all models.

0 DRYER CYCLE KNOB

Use your Dryer Cycle knob to select available cycles on your dryer, Turn the knob to select a cycle for your laundry load,

See "Cycle Guide" for detailed descriptions of cycles.

Timed Dry

Will run the dryer for the specified time on the control. On models with a selectable temperature knob, you may choose a setting based on the fabrics in your load. Drying time and temperature will depend on your dryer model.

Auto Moisture Sensing TM/Auto Dry (on some models)

Auto Dry cycles give the best drying in the shortest time. Drying time will vary based on fabric type, load size, and dryness setting. Some models have Auto Dry with Auto

Moisture Sensing TM.

Air Only

Use the Air Only setting to dry foam, rubber, plastic, or heat-sensitive fabrics.

Wrinkle Guard TM option (on some models)

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE

GUARD TM option periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.

[] Get up to 40 minutes of heat-free, periodic tumbling at

the end of a cycle. Turn the WRINKLE GUARD TM knob to select ON or OFF at any time before the cycle has ended.

Appearance may vary.

Dry Temp (on some models)

Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select

for a load, select the lower setting rather than the higher setting. See "Cycle Guide."

Cycle Signal/PUSH TO START

The Cycle Signal produces an audible sound when the drying cycle is finished. On some models, this knob is combined with

the PUSH to START button. Promptly removing clothes at the end of the cycle reduces wrinkling.

Turn the CYCLE SIGNAL knob to select the desired setting (On or Off). With combined buttons, Press and hold the

CYCLE SIGNAL/PUSH to START button to start the dryer. On models without the cycle signal, press the PUSH to START button to start the dryer.

NOTE: When the Wrinkle Guard TM setting is selected and the Signal is on, the tone will sound every 5 minutes until the

clothes are removed, or the Wrinkle Guard TM setting ends.

CYCLE GUIDE - AUTO MOISTURE SENSINGrM/AUTO DRY CYCLES

Not all cycles and settings are available on all models.

AUTO MOISTURE $ENSINGTM/AUTO DRY - Senses moisture in the load or air temperature and shuts off: when the load reaches

the selected dryness level. Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.

lt.ms todry:

Jeans, heavy work clothes, towels

Work clothes, medium Medium Casual More weight fabrics, sheets Normal

Casual, shirts, pants,

lightweight items,

synthetics, delicates, athletic wear

rv Dryness AvalJ:bJe I CycleDetails:

Temp: Level: Options: I

High Cotton

Low Deiicates More

Normal

Less

Normal

Less

Wrinkle guard TM

Cycle Signal

Dry Temp

Wrinkle Guard TM

Cycle Signal

Dry Temp

Wrinkle Ouard TM

Cycle Signal

Dry Temp

Automatic cycles give the best drying in the

shortest time. Drying time varies based on load size, and dryness setting.

Select a drying temperature based on the fabrics in your load. If you are unsure of the

temperature to select for a load, select the lower setting rather than the higher setting.

NOTE: If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like, select Less next

time you dry a similar load.

CYCLE GUIDE - TiME DRY CYCLES

Not all cycles and settings are available on all models. TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle

knob or be a separate control.

Temp: Options:

Any load Timed Dry Any Dry Temp Select a drying temperature based

Any load Touch Up Any N/A This is the last step in a cycle that

Rubber, plastic, heat Air Only No heat Time Adjustment Use a Air Only (no heat) setting for

sensitive fabrics foam, rubber, plastic, or heat-sensitive

on the fabrics in your load. If you are unsure of the temperature to select for

a load, select the lower setting rather than the higher setting.

uses heat. The load is cooled slowly to reduce wrinkling and make it easier to

handle. Use this cycle to smooth wear

or packing wrinkles.

fabrics.

Setting the Drying Temperature

if your dryer has multiple temp settings: A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.

A Low DelJcates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.

Use a Air Only (no heat) setting for foam, rubber, plastic, or heat-sensitive fabrics. Line dry bonded or laminated fabrics.

NOTE: if you have questions about drying temperatures for various loads, refer to the care label directions.

USING YOUR DRYER

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS

before operating this appliance.

1. Clean the lint screen

Fire Hazard

No washer can completely remove oil, Do not dry anything that has ever had any type of oil on

it (including cooking oils). items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death

or fire,

2. Load the dryer

Clean the lint screen before each load. Pull the lint screen out of its holder. Roll Nnt off the screen with your fingers. Do not rinse or

wash screen to remove Nnt. Push the lint screen firmly back into place. For additional cleaning information, see "Dryer Care."

__ m

Place laundry in the dryer. Close the door. Do not tightly pack the dryer; clothes should be able to tumble freely.

NOTE: Your model may have a different door than the one shown. Some models have drop down doors.

3. Select the desired cycle

(_5. Select Cycle Signal, if desired

(on some models)

40 MIN

WRINKLE GUARD

Auto Moisture

Sensing

Less

Normal

Select the desired cycle for your load. See the "Cycle Guide" for more information about each cycle.

Auto Moisture Senslng TM/AutO Dry cycles

You can select a different dry level, depending on your load, by turning the knob to More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off:. Once a dry level

is set, it cannot be changed without stopping the cycle. Auto Moisture SensingTM/Auto Dry cycles give the best drying in

the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for Auto Moisture SensingTM/Auta Dry

cycles. Choose normal to save energy. Less Dry removes Jess moisture and used for loads you may want to put on a hanger

to complete drying.

CYCLE SIGNAL

Off On

Push to Start

Turn the CYCLE SIGNAL knob to select the desired setting (On or Off). The Cycle Signal produces an audible sound when the

drying cycle is flnished. Promptly removing clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Guard TM option is selected and the Cycle Signal is on, the tone will sound every 5 minutes until the

clothes are removed, or the Wrinkle Guard TM option ends.

(_O._" Press and hold PUSH to START

to begin cycle

CYCLE SIGNAL

Off On

4. Set cycle options (on some models)

Medium

Off On Low e High

• ® Delicates _._ Cotton

Wrinkle Guard

Select the cycle options by turning the knob to the desired position.

NOTE: Not all options and settings are available with all cycles.

Casual

Dry Temp

Wrinkle Guard TM option

[] Get up to 40 minutes of heat-free, periodic tumbling at the

end of a cycle. Turn the WRINKLE GUARD TM knob to select ON or OFF at any time before the cycle has ended.

Dry Temp

Turn the DRY TEMP knob to change the drying temperature setting. See "Setting the Drying Temperature."

Pushto Start Push to Start

Press and hold the PUSH to START button to begin the cycle. Promptly remove garments after cycle has completed to

reduce wrinkling. Use the Wrinkle Guard TM option to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops.

DRYER CARE

g the dryer location

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least !8 inches (460 turn) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

fCleaning the dryer interior

To clean dryer drum

1. Apply a liquid, nonflammable household cleaner to the

stained area of the drum and rub with a soft cloth until stain is removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum. NOTE: Garments that contain loose dyes, such as denim blue

jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will

not stain future loads of clothes. Dry these items inside out to avoid drum staining.

f -4

Removing accumulated lint

fCleaning the lint screen

Every load cleanlng

The lint screen is located in the dryer. A screen blocked

by Nnt can increase drying time.

To clean:

1. Pull the lint screen out of its holder. Roll lint off: the screen with your fingers. Do not rinse or wash

screen to remove lint.

2. Push the lint screen firmly back into place.

iMPORTANT:

[] Do not run the dryer with the lint screen loose, damaged,

blocked, or missing. Doing so can cause overheating and

damage to both the dryer and fabrics.

[] If lint falls off: the screen into the dryer during removal_

check the exhaust hood and remove the lint. See

"Venting Requirements."

As needed cieanlng

Laundry detergent and fabric softener residue can build up

on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load

is completely dry. The screen is probably clogged if lint falls

off: while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash:

1. Roll lint off: the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent.

Scrub lint screen with the brush to remove residue buildup.

From inside the Dryer Cabinet

Lint should be removed every 2 years_ or more often,

depending on dryer usage. Cleaning should be done

by a qualified servicer.

From the Exhaust Vent

Lint should be removed every 2 years_ or more often_

depending on dryer usage.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Reinstall

screen in dryer.

Vacation, storage, and moving care

f Changing the drum light (on some models)

Non=Use or Storage Care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. (For gas dryers only): Close shutoff: valve to gas

supply line.

3. Clean lint screen. See "Cleaning the Lint Screen."

Moving Care

For power supply cord-connected dryers:

I. Unplug the power supply cord.

2. Make sure leveling legs are secure in dryer base.

3. Use tape to secure dryer door.

Electrical Shock Hazard

Disconnect power before servicing. Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light bulb cover on the

back wall of the dryer. Using a Phillips head screw driver, remove the screw located in the lower right=hand corner

of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with a lO-watt appliance bulb only. Replace the cover and

secure with the screw.

4. Plug in dryer or reconnect power.

For direct-wired dryers:

1. Turn off power at fuse or breaker box.

2. Disconnect wiring.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

For gas dryers:

1. Unplug or disconnect power to dryer.

2. Close shutoff valve to gas supply line and disconnect.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

Reinstaillng the Dryer

Follow the "installation instructions" to locate, level_ and connect the dryer.

r TROUBLESHOOTING

If you experience Possible Causes Somufion

Clothes are not drying Lint screen clogged with lint. Lint screen should be cleaned before each load. satisfactorily, drying

times are too long. The Air Only cycle has been Select the right cycle for the types of garments being dried.

selected. See "Cycle Guide."

Load too large and heavy to dry Separate the load to tumble freely.

quickly.

Exhaust vent or outside exhaust Run the dryer for 5-10 minutes. Hold your hand under the hood clogged with Hnt, restricting outside exhaust hood to check air movement. If you do not feel

air movement, air movement, clean exhaust system of lint or replace exhaust

vent with heavy metal or flexible metal vent. Make sure vent is not crushed or kinked. See 'qnstallafion Instructions."

Fabric softener sheets blocking Use only one fabric softener sheet, and use it only once.

the grill.

Exhaust vent not the correct length. Check that the exhaust vent is not too long or has too many

Exhaust vent diameter not the Use 4" (102 mm) diameter vent material. correct size.

Dryer located in a room with Proper operation of dryer cycles requires temperatures above temperature below 45°F (7°C). 45°F (7°C).

Dryer located in a closet without Closet doors must have ventilation openings at the top and adequate openings, bottom of the door. The front of the dryer requires a minimum

Dryer wJJJnot run Door not closed completely. Make sure the dryer door is closed completely.

PUSH to START button not pressed Press and hold the PUSH to START button until you hear the dryer

firmly or held long enough, drum moving.

Household fuse is blown or circuit Electric dryers use 2 household fuses or circuit breakers. The breaker has tripped, drum may be turning, but you may not have heat. Replace both

Incorrect power supply. Electric dryers require 240-volt power supply. Check with a

Wrong type of fuse. Use a time-delay fuse.

Unusual sounds Dryer had a period of non-use. If the dryer hasn't been used for awhile, there may be a thumping

A coin, button, or paper clip is Check the front and rear edges of the drum for small objects. caught between the drum and front Clean out pockets before laundering.

or rear of the dryer. It is a gas dryer. The gas valve clicking is a normal operating sound.

turns. Long venting will increase drying times. Make sure vent is

not crushed or kinked. See "Installation Instructions."

of 1" (25 mm) of airspace, and, for most installations, the rear of the dryer requires 5" (127 mm). See "Installation Instructions."

fuses or reset the circuit breaker. If the problem continues, call an electrician.

qualified electrician.

sound during the first few minutes of operation.

The four legs are not installed, and The dryer may vibrate if not properly installed. See "installation the dryer is not level front to back Instructions." and side to side.

Clothing knotted or balled up. When balled up, the load will bounce, causing the dryer

to vibrate. Separate the load items and restart the dryer.

No heat Household fuse is blown or circuit The drum may be turning, but you may not have heat. Electric

breaker has tripped, dryers use 2 household fuses or circuit breakers. Replace both

fuses or reset the circuit breaker. If the problem continues, call an electrician.

Supply line valve not open. For gas dryers, make sure the supply line valve is open.

Incorrect power supply. Electric dryers require 240-volt power supply. Check with a

k,,. qualified electrician. ,._

r TROUBLESHOOTING cont.

If you experience Possible Causes Somufion

Cycle time too short Automatic cycle ending early. The load may not be contacting the sensor strips. Level the dryer.

Use Timed Dry for very small loads. Change the dry level setting on Auto Moisture SensingTM/Auto Dry cycles.

increasing or decreasing the dry level setting wJJJchange the amount of drying time in a cycle.

Lint on load Lint screen should be cleaned before each load.

Stains on load or drum

Loads are wrinkled The load was not removed from dryer Select Wrinkle Guard TM option to tumble the load without heat

Odors You have recently been painting, If so, ventilate the area. When the odors or fumes are gone from

Load is too hot Laundry items werer removed from Allow Cool Down to finish before removing laundry from dryer.

k_,. This reduces overdryJng. ._

Lint screen clogged.

Dryer fabric softener not properly used.

at the end of the cycle, to avoid wrinkling. Dryer tightly packed. Dry smaller loads that can tumble freely reduce wrinkles from

staining, or varnishing in the area the area, rewash and dry the clothing. where your dryer is located.

The electric dryer is being used for The new electric heating element may have an odor. The odor the first time. wJJJbe gone after the first cycle.

the dryer before the end of the All cycles are cooled slowly to reduced wrinkling and make it cycle, easier to handle. Items removed before Cool Down may feel

A high temperature cycle was used Select a lower temperature, and use an automatic drying cycle. or the Dry Temp was set on high. These cycles sense the temperature or the moisture ievei in the

Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain

your garments. Drum stains are caused by dyes in clothing (usually blue jeans).

These wJJJnot transfer to other clothing.

forming.

very warm.

load and shut of]: when the load reaches the seiected dryness.

+ 28 hidden pages