How it Works
Kenmore
Loading...
11074972300
Installation Guide
20 pgs1.3 Mb0
Owner’s Manual
16 pgs1.34 Mb0

Kenmore 11074942300, 11074946300, 11074972300 Installation Guide

27 IN.(69CM) GAS DRYER
INSTALLATION INSTRUCTIONS
INSTRUCCIONES DE INSTALACION PARA LA
SECADOI::LAA GAS DE 27 PULG. (69 CM)
Table ofContents / |ndice
DRYER SAFETY ................................................ I
INSTALLATION INSTRUCTIONS .................... 2
Tools and Parts .............................................. 2
SERVICE NUMBERS ................. BACK COVER
SEGURIDAD DE LA SECADORA ............................ 11
INSTRUCCIONES DE INSTALACION .................... 12
Herramientas y piezae .......................... 12
Requisitos de Iocalizaci6n .................................... 12
Requisitos el_ctricos ............................................. 14
Requisitos del suministro de gas .......................... 14
Requisitos de ventilaci6n ...................................... 16
Planificaci6n del eistema de ventilaci6n ............... 16
Instalaci6n det sistema de ventilaci6n .................. 18
Instalaci6n de tas patas niveladoras ..................... 18
Nivetaci6n de la secadora ..................................... lg
Conexi6n del suministro de gas ............................ 19
Conexi6n del ducto de escape ............................. lg
Complete la instalaci6n ......................................... lg
NOMEROS DE SERVICIO ........... CONTRAPORTADA
DRYER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow instructions,
You can be killed or seriously injured if you don't follow
instructions,
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
When discarding or storing your old clothes dryer,remove the door.
SAVE THESE INSTRUCTIONS
3979977
WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
INSTALLATION INSTRUCTIONS
Parts supplied:
Remove parts package from dryer drum. Check that all parts
Check that you have everything necessary for correct installation.
Proper installation is your responsibility,
8 in. or 10 in, pipe wrench 8 in. or 10 in. adjustable
wrench (for gas
connections) Flat-blade screwdriver
Adjustable wrench that
opens to 1 in. (2.5 cm) or hex-head socket wrench
(for adjusting dryer feet) Level
¼ in, nut driver or socket
wrench
• Knife
• Safety glasses
• Pipe-joint compound resistant to L.R gas
• Caulking gun and compound (for installing
new exhaust vent)
• Gloves
• Vent clamps
• Pliers
were included.
4 leveling legs
Parts needed:
Check local codes and with gas supplier. Check existing gas supply, electrical supply and venting, and read "Electrical
Requirements," "Gas Supply Requirements" and "Venting Requirements" before purchasing parts.
Mobile home installations require special parts (listed following)
available for purchase from your local Sears store or Sears Service Center. For further information, call 1-800-4-MY-HOME e
(1-800-469-4663).
• Mobile home installation kit. Ask for Part Number 346764.
• Metal exhaust system hardware.
2
_ '_/_,_,_,_:_'°_,,_ _,_::;: _, _}_S _' _;_ installation
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer. Place dryer at least 18 inches (46 cm) above the floor
for a garage installation. Failure to do so can result in death, explosion, or fire.
Minimum installation spacing for recessed area or closet
The dimensions shown following are for the minimum spacing allowed.
• Additional spacing should be considered for ease of installation and servicing.
Additional clearances might be required for wall, door and floor moldings.
Additional spacing of 1 in. (2.5 cm) on all sides of the dryer is recommended to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable. Companion appliance spacing should also be considered.
14
(3t0m2) -
You will need
• A location that allows for proper exhaust installation. A gas dryer must be exhausted to the outdoors. See "Venting
Requirements."
• A grounded electrical outlet located within 2 ft (61 cm) of either side of the dryer. See "Electrical Requirements."
• A sturdy floor to support the total weight (dryer and load) of 200 Ib (90.7 kg). The combined weight of a companion
appliance should also be considered.
• A level floor with a maximum slope of 1 in. (2.5 cm) under entire dryer. (If slope is greater than 1 in. [2.5 cm], install
Extended Dryer Feet Kit, Part No. 279810.) Clothes may not
tumble properly and dryers with automatic sensor cycles may
not operate correctly if dryer is not level.
Do not operate your dryer at temperatures below 45°F (7°C). At lower temperatures, the dryer might not shut off at the end of an
automatic cycle. Drying times can be extended. The dryer must not be installed or stored in an area where it will
be exposed to water and/or weather.
Check code requirements. Some codes limit, or do not permit,
installation of the dryer in garages, closets, mobile homes, or
sleeping quarters. Contact your local building inspector.
NOTE: No other fuel-burning appliance can be installed in the
same closet as a dryer.
Installation Clearances
The location must be largeenough to allow the dryer door to open fully,
Dryer Dimensions
14&7cza)
(tM cm2) ._
t"_ _ _,"_ _1" _1' _ _,."_,.'_
2
1. Recessed area
2. Side view - closet or confined area
3. Closet door with vents
Mobile Home-Additional Installation Requirements
This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280).
Mobile home installations require:
• Metal exhaust system hardware which is available for purchase from your dealer.
• Mobile Home Installation Kit Part #346764, see "Tools and Parts" section for ordering information.
• Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a
nearby window) should be at least twice as large as the dryer
exhaust opening.
* 1
Most installations require a minimum 5/2 in. (14 cm) clearance behind the dryer for the exhaust vent with elbow. See "Venting Requirements."
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
a
120-Volt, 60-Hz., AC-only, 15- or 2g-amp fused electrical
supply is required. (Time-delay fuse or circuit breaker is recommended.) It is recommended that a separate circuit serving only this dryer be provided.
IMPORTANT: The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.
GROUNDING INSTRUCTIONS
• For a grounded, cord-connected dryer:
This dryer must be grounded, in the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is
properly grounded. De not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
SAVE THESE INSTRUCTIONS
Explosion Hazard
Use a new AGA or CSA approved gas supply line. Install a shut-off valve.
Securely tighten all gas connections. If connected to LP, have a qualified person make sure
gas pressure does not exceed 13" (33 cm) water column.
Examples of a qualified person include: licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
Gas Type
Natural Gas:
This dryer is equipped for use with NATURAL GAS. It is design- certified by CSA International for L.R (propane or butane) gases
with appropriate conversion. a Your dryer must have the correct burner for the type of gas in
your home. Burner information is located on the rating plate
in the door well of your dryer. If this information does not
agree with the type of gas available, contact your dealer or call the phone numbers referenced on the front page of your
"Dryer User instructions."
LR gas conversion:
Conversion must be made by a qualified technician.
No attempt shall be made to convert the appliance from the gas
specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier.
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSi Z223.1/NFPA 54.
4
Gas Supply Line:
• 1/2in. IPSpipe is recommended.
• % in. approved tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.
• Must include 1/8in. NPT plugged tapping accessible for test gage connection, immediately upstream of the gas connection to the dryer (see illustration).
• Must include a shutoff valve: An individual shutoff valve must be installed within six (6) feet
(1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1. The location should be easy to reach for
opening and closing.
1 3 5
2 4
1. _ in. flexible gas connector
2. _ in, pipe to flare adapter fitting
3. _in. NPTplugged tapping
4. Y2in. NPT gas supply line
5. Gas shutoff valve
Gas supply connection requirements
There are many methods by which your gas dryer can be connected to the gas supply. Listed here are some guidelines for
two different methods of connection. Option I (Recommended Method}:
Flexible stainless steel gas connector:
• If local codes permit, use flexible stainless steel gas connector (Design Certified by the American Gas Association
or CSA International) to connect your dryer to the rigid gas supply line. Use an elbow and a 3/8in. flare x 3/8in. NPT
adapter fitting between the stainless steel gas connector and the dryer gas pipe, as needed to prevent kinking.
Option 2 (Alternate Method): Approved aluminum or copper tubing:
• Lengths under 20 ft (6.1 m) can use 3/8in. approved tubing (if codes and gas supplier permit).
• If you are using natural gas, do not use copper tubing.
• % in. flare x 3/sin. NPT adapter fitting between dryer pipe and % in. approved tubing.
• Lengths over 20 ff (6.1 re) should use larger tubing and a different size adapter fitting.
• If your dryer has been converted to use L.R gas, % in. L.R compatible copper tubing can be used. If the total length of
the supply line is more than 20 ft (6.1 m), use larger pipe.
NOTE: Pipe joint compounds that resist the action of L.R gas
must be used. Do not use TEFLON _<tape.
Dryer Gas Pipe
• The gas pipe that comes out through the rear of your dryer
has a % in. male pipe thread.
Burner Input Requirements: Elevations up to 10,000 feet (3,048 meters):
• The design of this dryer is certified by CSA International for use at altitudes up to 16,000 ft (3,048 m) above sea level at
the B.T.U. rating indicated on the model/serial number plate.
Burner input adjustments are not required when the dryer is
operated up to this elevation.
Elevations above 10,000 feet (3,048 meters):
• When installed above 10,000 ft (3,048 m) a 4% reduction of
the burner B.T.U. rating shown on the model/serial number
plate is required for each 1,000 ft (365 m) increase in
elevation.
Gas Supply Pressure Testing
• The dryer must be disconnected from the gas supply piping
system during any pressure testing.
Fire Hazard
Use a heavy metal vent. Do not use a plastic vent.
Do not use a metal foil vent. Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, this dryer MUST BE
EXHAUSTED OUTDOORS.
4 in. (10.2 cm) heavy metal exhaust vent and clamps must be
used. DURASAFE TM venting products are recommended. DURASAFE TM vent products can be purchased from your local
Sears store or Sears Service Center. For more information, call
1-800-4-MY-HOME _ (1-800-469-4663).
• The dryer exhaust must not be connected into any gas vent,
chimney, wall, ceiling, or a concealed space of a building.
• Do not use an exhaust hood with a magnetic latch.
• Do not install flexible metal vent in enclosed walls, ceilings or
floors.
(15.88crn)
1, V2in. NPT gas supply line
2. _in. NPT dryerpipe
_TEFLON is a registered trademark of DuPont
Use clamps to seal all joints. Exhaust vent must not be connected or secured with screws or other fastening devices which extend into the interior of the duct. Do not use duct
tape.
IMPORTANT: Observe all governing codes and ordinances.
Improper venting can cause moisture and lint to collect
indoors, which may result in:
• Moisture damage to woodwork, furniture, paint, wall- paper, carpets, etc.
• Housecleaning problems and health problems.
Optional exhaust installations This dryer can be converted to exhaust out the right side, left
side, or through the bottom.
Fire Hazard
Use a heavy metal vent. Do not use plastic or metal foil vent. Rigid metal vent is recommended to prevent crushing and kinking. Flexible metal vent must be fully extended and supported when
the dryer is in its final position. Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow
and poor performance. An exhaust hood should cap the vent to prevent rodents and
insects from entering the home. Exhaust hood must be at least 12 in. (30.5 cm) from the ground or
any object that may be in the path of the exhaust (such as flowers, rocks or bushes, etc.).
If using an existing vent system, clean lint from the entire length
of the system and make sure exhaust hood is not plugged with
lint. Replace any plastic or metal foil vent with rigid metal or
flexible metal vent.
Typical exhaust installations
Typical installations vent the dryer from the rear of the dryer. Other installations are possible.
2
J !:
,..........
Cover unused exhaust holes with one of the following kits:
279818 (white) 279819 (almond) 279915 (graphite) 279925 (biscuit)
Contact your local dealer. Failure to follow these instructions can result in death,
fire, electrical shock, or serious injury.
2
1. Standard rear offset exhaust installation
2. Left or right side exhaust installation
3. Bottom exhaust installation
Alternate installations for close clearances Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance installations are shown.
Refer to the manufacturer's instructions.
1. Dryer
2. Elbow
3. Watt
4. Exhaust hood
6
5. Clamps
6. Rigid metal or flexible metal vent
7. Vent length necessary to connect elbows
8. Exhaust outlet
i [ " "
"'-i .... """--[
1 2
1, Over-The-Top installation
(also available with one offset elbow)
2. Periscope installation
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use