Sears Canada Inc.
Toronto, Ontario, Canada M5B 2C3
www.sears.ca
TABLE OF CONTENTS
WASHER SAFETY �����������������������������������������������������������������������2
WHAT'S NEW UNDER THE LID? ���������������������������������������������3
CONTROL PANEL AND FEATURES ���������������������������������������� 4
Dispensers �����������������������������������������������������������������������������6
CYCLE GUIDE ���������������������������������������������������������������������������� 7
USING YOUR WASHER ������������������������������������������������������������9
Using Laundry Product Dispensers ����������������������������������10
WASHER SAFETY
WASHER MAINTENANCE ������������������������������������������������������ 12
TROUBLESHOOTING ��������������������������������������������������������������14
PROTECTION AGREEMENTS ������������������������������������������������� 19
WARRANTY ������������������������������������������������������������������������������� 19
ASSISTANCE OR SERVICE �������������������������������������� Back Cover
2
WHAT’S NEW UNDER THE LID?
Cleaning with Less Water
Washplate
Washplate
Traditional agitator-style
washer
The most striking dierence in your new washer is the low-water
washplate wash system� The washer automatically adjusts the
water level to the load size—no water level selector is needed�
Washer with low-water
washplate wash system
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load� This may take several minutes before water is
added. You will nd a step-by-step description in the “Cycle
Status Lights” section�
Initially the basket will start to spin prior to adding water; this is
part of the sensing process and is normal� This low-water wash
method uses less water and energy compared to a traditional
agitator-style washer�
Choosing the Right Detergent
Use only High Eciency detergents. The package will be marked
“HE” or “High Eciency.” Low-water washing creates excessive
sudsing with a non-HE detergent� Using non-HE detergent
will likely result in longer cycle times and reduced rinsing
performance� It may also result in component malfunction and,
over time, buildup of mold or mildew� HE detergents should be
low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance� They should hold soil in
suspension so it is not redeposited onto clean clothes� Not all
detergents labeled as High Eciency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds�
If you use one of these and see an “F0E2” error code appear
in the display, consider using a dierent HE detergent. Always
follow the detergent manufacturer’s instructions to determine
the amount of detergent to use. Do not go over the Max line
on the dispenser� See “Using Laundry Product Dispensers”
for more information�
For best performance, it is recommended to load items in loose
heaps evenly around the washplate�
As the washer dampens and moves the load, the level of the
items will settle in the basket� This is normal and does not
indicate that more items should be added�
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer� It is normal for some
of the load to be above the water line�
Use only High Eciency (HE) detergent.
Improved Cleaning
Low-water cleaning means concentrated cleaning� Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils� This low
water wash also allows the clothing to move in a more eective
way to remove soils�
Normal Sounds You Can Expect
At dierent stages of the wash cycle, you may hear sounds and
noises that are dierent from those of your previous washer. For
example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test� There
will be dierent kinds of humming and whirring sounds as the
washplate moves the load and as basket is slowing down to
stop� And sometimes, you may hear nothing at all, as the washer
determines the correct water level for your load or allows time
for clothes to soak�
3
STEAM MODEL
CONTROL PANEL AND FEATURES
213
4
6
78
4
NON-STEAM MODEL
5
213
6578
Not all features and cycles are available on all models�
NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are registered,
touch the control panel with your ngertip, not your ngernail. When selecting a setting or option, simply touch its name until the desired
section is illuminated�
POWER BUTTON
1
Touch to turn on the washer� Touch to stop/cancel a cycle
at any time�
WASH CYCLE KNOB
2
Turn the Wash Cycle knob to select a cycle for your laundry
load� See “Cycle Guide” for detailed descriptions of cycles�
TIME DISPLAY
3
The Estimated Time Remaining display shows the time
required for the cycle to complete� Factors such as load
size and water pressure may a ect the time shown in the
display. Overloading, unbalanced loads, or excessive suds
may cause the washer to adjust the cycle time as well�
DELAY WASH
4
Use “+” and “–” to delay the start of the wash cycle by up
to 12 hours. To turn o Delay Wash, use “+” and “–” to set
the delay time to “0,” or touch POWER�
START/PAUSE/UNLOCK LID BUTTON
5
Touch and hold START/PAUSE button for up to 3 seconds
or until the washer starts the selected cycle; touch again
to pause a cycle�
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid�
CYCLE MODIFIERS
6
When you select a cycle, its default settings will light up�
WASH TEMP
Wash Temp control senses and maintains uniform water
temperatures by regulating incoming hot and cold water�
Select a wash temperature based on the type of fabric
and soils being washed� For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric�
• On some models and cycles, warm and hot water may
be cooler than what your previous washer provided�
• Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum
temperature�
SOIL LEVEL
Select the most suitable setting for your load� For heavily
soiled items, select Ex Heavy Soil Level for more wash
time� For lightly soiled items, select Light Soil Level for
less wash time�
Lighter soil level setting will help reduce tangling and
wrinkling�
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected� The preset speeds can be changed�
Not all spin speeds are available with all cycles�
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load�
• Slower spin speeds mean less wrinkling but will leave
your load more damp�
4
CYCLE SIGNAL
Use this option to adjust volume of the signal that sounds
at end of cycle� The Cycle Signal is a helpful reminder to
remove items from washer as soon as the cycle has
completed�
To turn Button Sounds either On or Off:
While washer is on, touch and hold Cycle Signal for 3
seconds� Washer will make a single beep when the process
is complete�
NOTE:
• Cycle Signal button will still operate, even if you turned
the button sounds o.
• Whatever your preferences are, they remain in eect
through a power loss�
• The Default setting for button sounds is ON�
CYCLE OPTIONS
7
You may add or remove options for each cycle� Note that
not all options can be used with all cycles, and some are
preset to work with certain cycles�
PREWASH
Use this option to add an extra agitation and soak time
to the beginning of any cycle to break up tough stains�
DEEP FILL
Will add the most amount of water for large or bulky
loads� Items need to move freely� Tightly packing the
load can lead to poor cleaning performance, and may
increase wrinkling and tangling�
TimedOxi
This washer is designed to dispense laundry boosters
such as oxygenated stain treaters and color-safe
bleach at the right time in the cycle for best cleaning
performance� Do not use laundry boosters and chlorine
bleach in the same cycle�
TWO RINSES
This option can be used to automatically add a second
rinse to most cycles�
NOTE: If you want to Drain and Spin only, select the Rinse
& Spin cycle; then touch to turn o the Two Rinses option.
FABRIC SOFTENER
This option must be set to ON if using fabric softener�
It ensures that fabric softener is added at the correct
time in the rinse for even distribution�
STAIN TREAT for Steam models or STAIN BOOST for
Non-Steam models
This option provides enhanced cleaning action for tough
stains� It will add additional agitation and soak time to
the cycle�
CYCLE STATUS LIGHTS INDICATOR
8
The Cycle Status Lights show the progress of a cycle� At each
stage of the process, you may notice sounds or pauses that
are dierent from traditional washers.
DELAY
When the Delay Wash is selected, this light will come on
to indicate your washer is set-up to run a delayed wash�
ADD A GARMENT
You may place additional clothing in the wash when the
Add a Garment indicator is lit without sacricing wash
performance� Touch START/PAUSE once� The Lid Locked
light will turn o. Open the washer lid, add garments,
and close the lid� Touch and hold START/PAUSE to restart�
WASH
You will hear the motor and washplate moving the load�
It is normal for some of the load to be above the water
line� Low-water cleaning means concentrated cleaning�
Rather than diluting detergent as done in an agitator-style
washer, this washer delivers the detergent directly to the
soils. The motor sounds may change at dierent stages
in the cycle� The wash time is determined by the selected
Soil Level�
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load� Fabric softener will
be added if the Fabric Softener option was selected�
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed�
COMPLETE
Once the cycle is complete, this light will come on�
Remove the load promptly for best results�
LID LOCKED
To allow for proper load sensing and spinning, the lid
will lock and the Lid Locked light will turn on� This light
indicates that the lid is locked and cannot be opened�
If you need to open the lid, touch START/PAUSE/Unlock
Lid� The lid will unlock once the washer movement has
stopped� This may take several minutes if the load was
spinning at high speed� Touch and hold START/PAUSE/
Unlock Lid again for up to 3 seconds to resume the cycle�
5
Dispensers
Liquid fabric softener dispenser
A
Pour measured liquid fabric softener into the liquid fabric
softener dispenser, if desired� It will dispense automatically
at the optimum time�
• Use only liquid fabric softener in this dispenser�
High Efficiency “HE” detergent dispenser
B
Add liquid or powdered HE detergent product to this
dispenser for your main wash cycle� Remove tray if using
powder detergent�
IMPORTANT: Make sure tray is in drawer when using liquid
detergent and removed when using powder detergent and
do not go over the Max line.
Use only High Efficiency (HE) detergent.
NOTE: Follow the manufacturer’s instructions to determine
the amount of detergent to use� Do not add single-dose
laundry packets, color-safe bleach, or fabric softener
crystals to dispensers� They will not dispense correctly�
Oxi dispenser
C
This dispenser holds up to ¾ cup (180 mL) Oxi booster or
other laundry booster, such as powdered or liquid color-safe
bleach� Laundry boosters are automatically dispensed at
the proper time during the wash cycle. Be sure to select Oxi
from the options to ensure proper dispensing�
NOTE: Fill dispenser with only oxi. Do not mix with bleach.
B
C
A
D
Liquid chlorine bleach dispenser
D
This dispenser holds up to ¾ cup (180 mL) liquid chlorine
bleach� The bleach will be automatically diluted and
dispensed at the optimum time during the wash cycle�
This dispenser cannot dilute powdered bleach�
NOTE: Fill dispenser with only liquid bleach�
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.