Kenmore 11027872600 Owner’s Manual

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME e (1-800-469-4663).

iiiiiiii!i ii

Models/Modelos/Modeles 110.2783", 2784*, 2787*

i%1!iii

Electrical Shock Hazard

Plug into a grounded 3 prong outet.
Do not remove ground prong,
Do not use an adapter,

Do not use an extension cord.
Failure to folow these instructions can result in

death, fire, or electrical shock,

Measure detergent and pour into washer.

Drop sorted load loosely into washer. Load evenly around

agitator to maintain balance.
Close the lid.

Select Cycle, Water Level, Soil Level, Temperature and
Rinse option based on your load.

Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (rimer) knob to stop the washer.

Never place items in the washer that are
dampened with gasolne or other flammable fluids.

No washer can completely remove oil
Do not dry anything that has ever had any type of

oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.

You should select the wast3/rinse water temperature

based on the type of load you are washing. Always use

the warmest wash water safe for fabric and follow garment
label instructions. For recommended use, see the Use and
Care Guide. Depending on location, water temperatures
may vary by season. The fill rate may also differ depending
on the water temperature selected.

Fire Hazard

II'1'I'£I L H£L IIIIRIL

Adjust to load size. Clothes should move freely. To change the water level after the wash action starts, you may turn knob to desired

setting. On models with Variable Water Level Control, you must turn the knob to Reset before changing the water level. This is

J

W10026587A Continued on back

Ultra Clean with Soak Soak

Use this cycle for sturdy or heavily soiled loads. This cycle
includes a 5-minute soak to help improve cleaning.

• Approximate cycle time: 60 minutes

Normal

Select this cycle for cottons and linens used regularly. The
fast-speed spin shortens drying time.

• Approximate cycle time: 40 minutes

Permanent Press

Use this cycle to wash no-iron/permanent press fabrics. This

cycle provides an additional load-cooling spray rinse to

reduce wrinkling.

• Approximate cycle time: 30 minutes

This cycle features agitation followed by unlimited soak time to help

remove stains that need pretreatment. After soaking, you have two

options. To use the same water in a wash cycle, advance the Cycle

Selector (]qmer) Control knob to a wash cycle. To remove the soak
water, reset the washer to a Spin setting. If the Soak water was drained,
add more detergent to the wash cycle.

NOTE: Be sure to push the control in to change to another cycle and
set. Pull the control out to start the washer in its selected cycle.

Prewash

This cycle helps to remove heavy soils that need pretreatment. This
cycle should be followed by a wash cycle. Add more detergent to the
wash cycle. The Prewash cycle does not include a rinse.

• Approximate cycle time: 12 minutes

2nd Rinse

Delicate

This cycle combines slow-speed agitation and slow-speed spin
to gently clean garments while reducing wrinkles.

• Approximate cycle time: 25 minutes

Handwash

Use this cycle for special care items. This cycle features a

series of brief agitation and short soaks for gentle cleaning
and minimal wrinkling.

• Approximate cycle lme: 25 minutes

A second rinse can be used to aid in improved removal of detergent or

bleach residue from garments. This option may be automatically added
to the wash cycle by setting the OPTIONS Control to 2nd Rinse any-
time before the end of the cycle.

Rinse & Spin

Select this option if you think an extra rinse is needed. Set OPTIONS
Control to 2rid Rinse. You should then set the Cycle Selector (Timer)
Control knob to a 2nd Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics by

removing excess water. Set OPTIONS Control (if available) to One

Rinse. You should then set Cycle Selector (Timer) Control to a Spin
setting, j

SIIL L£Y£1..WII lIB,lillY

One Rinse

This is the rinse at the end of each cycle.

TIIIIZ£$111TIII - $11115 LEIR$

Before you call service...check for the following.

Loud clicking and banging?

• The yellow shipping strap may still be in the rear of the
washer. Completely remove the yellow shipping strap.

• The washer should be level, and the feet should be firmly
on the floor.

Some sounds are normal but may be different from
those of your previous washer.

• The gears engaging after the drain and before the spin.

• The sound of air being pulled through the pump after most
of the water has drained.

2nd Rinse

Choose this option for an automatic 2nd rinse cycle.

Is the washer leaking?

• Fill hose connections are tight

• Gaskets in fill hose are tight and fiat

• Drain hose clamp is securely attached

• Faucets, drain/standpipe or laundry tub is not leaking

• The washer tub is centered, and the load evenly balanced
at the start of each load

• The washer is level

• The front feet are installed, and the nuts are tightened
to the cabinet

See the Use and Care Guide for complete details.

W10026587A e Registered Trademark / TM Trademark / SM Service Mark of 12/06

@ 2006 Sears Brands, LLC. Sears Brands_ LLC, used under licensee by Sears Canada Inc. Printed in U.S.A