Kenmore 11024934202, 11024932202, 11024924202, 11024924200, 11024922202 Owner’s Manual

WATER LEVEL

®

ULTRACLEAN 1(

J

Stock Nos./Reserva Nos./Stock nos.

22802, 22832, 22842, 22852, 22854, 22862, 22872, 22882, 22892, 22894, 23812, 23822, 23832, 23902,

23904, 23912, 23922, 23924, 23932, 23934, 24902, 24904, 24922, 24924, 24932, 24934, 24936

SOAK

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

Adjust to load size. Clothes should move freely. To change to a

higher water level after agitating starts, turn knob to desired

setting. On models with Variable Water Level Control, turn the

knob to Reset, then to desired setting.

Select a wash/rinse water temperature based on the type of load.
Some models have AUTO TEMPERATURE CONTROL (ATC). ATC

electronically senses and maintains a uniform water temperature

by regulating temperature of incoming hot and cold water.

Permanent Press I

A load cooling spray rinse reduces wrinkling.

Permanent Press II

During the wash cycle, the timer reaches PAUSE, and the washer

cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.

Ultra Clean

You may select this cycle for most loads.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Heavy Duty Sturdy or heavily High-speed

soiled loads agitation/

Normal Normally soiled Low-speed agitation/

cottons & linens High-speed spin

Handwaeh/ Lingerie & Extra-low speed

Casual loosely knit agitation/

items Low-speed spin

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin

fabrics

Handwash
Plus Fine
Delicates

8537146 Cycle Selections continued on next page

Hand washable and Extra-low speed

special care items agitation/SoaW

High-speed spin

Low-speed spin

Prewash

Helps to remove heavy soils and stains that need pretreatment. This

cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.

Automatic 2nd Rinse

Removes excess detergent residue. May be automatically added

to the Ultra Clean or Permanent Press cycles. Set the RINSE
OPTIONS Control to 2nd Rinse before you start the washer. You

won't have to come back later to select a second rinse.

Soak

Features agitation followed by unlimited soak time to help

remove heavy soils and stains that need pretreatment. When
finished soaking, reset the washer to a Spin setting to remove

water. The Soak cycle should be followed by an Ultra Clean or

Permanent Press cycle with additional detergent.

Rinse & Spin Spin Only

May be used when an extra rinse is needed to remove additional

detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control to One

Rinse. Set SPEEDS Control. Set Cycle Selector (Timer) Control to

a Rinse setting, then pull out to star[ the washer.

A drain and spin may help shorten drying times for some fabrics

by removing excess water. Set RINSE OPTIONS Control to One
Rinse. Set SPEEDS Control. Set Cycle Selector (Timer) Control to

a Spin setting, then pull out to star[ the washer.