Kenmore 110.2490 series, 110.2489 series, 110.2492 series, 110.2493 series, 110.2584 series Product Manual

®

WAlleR LEVEL WATER "I_MPERA'I1JRE

u

mNIE

MEDIUM ALrm_

LOAD COLD

COLD, OCOLD

HOT • COLD

COLD •COLD

RINSE OP_ONR SPEEDS

MmLl_lsm

m_ _D P_J_E'flE

mwl_

J

ULTRACLEAN 11

Models/Modelos/Modeles 110.2489_, 2490_, 2492:€, 2493_, 2584_, 2585_, 2586_

= color number, nt]mero de color, num_ro de couleur

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

Adjust to load size. Clothes should move freely. To change to a
higher water level after agitating starts, you may turn knob to

desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.

You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest wash

water safe for the fabric and follow garment label instructions.
Some models have AUTO TEMPERATURE CONTROL (ATC). ATC

electronically senses and maintains a uniform water temperature
by regulating the temperature of incoming hot and cold water.

On models without AUTO TEMPERATURE CONTROL (ATC) that
do have a Warm/Warm temperature setting, the warm wash will

be followed by an "Energy Saving" cold rinse followed by warm
spray rinses. This saves energy while providing the an effective

rinse performance.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Heavy Duty Sturdy or heavily High-speed

soiled loads agitation/

High-speed spin

Normal Normally soiled Low-speed agitation/

cottons & linens High-speed spin

Handwash/ Lingerie & Extra-low speed
Casual loosely knit agitation/

items Low-speed spin

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin
fabrics

Handwash Plus Hand washable Extra-low speed
Fine Delicates and special care agitation/SoaW

items Low-speed spin

8543543 Continued on next page

Permanent Press I

A load cooling spray rinse reduces wrinkling.

Permanent Press II

During the wash cycle, the timer reaches PAUSE, and the washer
cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.

Ultra Clean

You may select this cycle for most loads.

Prewash

Helps to removeheavy sells and stains that need pretreatment. This
cycle should be followed by an Ultra Clean or Permanent Press

cycle with additional detergent.

Automatic 2nd Rinse

Removes excess detergent residue. May be automatically added
to the Ultra Clean or Permanent Press cycles. Set the RINSE

OPTIONS Control to 2nd Rinse before you star_ the washer. You
won't have to come back later to select a second rinse.

Soak

Features agitation followed by unlimited soak time to help

remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should reset the washer to a Spin

setting to remove water. The Soak cycle should be followed by an

Ultra Clean or Permanent Press cycle with additional detergent.

Rinse & Spin

May be used when an extra rinse is needed to remove additional

detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control to One

Rinse, and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set RINSE OPTIONS Control to One

Rinse, and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Spin setting.