Kenmore 11024934201, 11024932201, 11024924201, 11024922201, 11024902201 Owner’s Manual

®

WAIl_R LEVEL WATER "_MPERA'NJRE RINSE OP_ON8 SPEEDS

MEDIUM

LOAD

u

RINSE _em_l_/sm

_u_ _

_W o °l_l_

mE Ii 0

msm

J

Models/Modelos/Modeles 110.2477_, 2478_, 2479_, 2481_, 2482_, 2483_, 2489_, 2490_, 2492_, 2493_

= color number, nOmero de color, numero de couleur

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Adjust to load size. Clothes should move freely. To change to a

higher water level after agitating starts, you may turn knob to

desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin

fabrics

You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe

for the fabric and follow garment label instructions. Some models

have AUTO TEMPERATURE CONTROL (ATC). ATC electronically
senses and maintains a uniform water temperature by regulating
temperature of incoming hot and cold water.

On models without AUTO TEMPERATURE CONTROL (ATC) that
do have a Warm/Warm temperature setting, the warm wash will

be followed by an "Energy Saving" cold rinse followed by warm
spray rinses. This saves energy while providing the same rinse

performance.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Heavy Duty Sturdy or heavily High-speed

soiled loads agitation/

High-speed spin

Normal Normally soiled Low-speed agitation/

cottons & linens High-speed spin

Handwash/ Lingerie & Extra-low speed

Casual loosely knit agitation/

items Low-speed spin

Handwash Plus Hand washable Extra-low speed
Fine Delicates and special care agitation/Soak/

items. Low-speed spin

Permanent Press I

A load cooling spray rinse reduces wrinkling.

Permanent Press II

During the wash cycle, the timer reaches PAUSE, and the washer

cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.

Ultra Clean

You may select this cycle for most loads.

Prewash

Helps to remove heavy soils and stains that need pretreatment. This

cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.

8537393 Cycle Selections continued on next page

Automatic 2nd Rinse

Rinse & Spin

Removes excess detergent residue. May be automatically added
to the Ultra Clean or Permanent Press cycles. Set the RINSE

OPTIONS Control to 2nd Rinse before you start the washer. You
won't have to come back later to select a second rinse.

Soak

Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. After the

soaking has finished, you should reset the washer to a Spin
setting to remove water. The Soak cycle should be followed by an

Ultra Clean or Permanent Press cycle with additional detergent.

May be used when an extra rinse is needed to remove additional

detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control to One

Rinse and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics

by removing excess water. Set RINSE OPTIONS Control to One
Rinse and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Spin setting.