Kenmore 11024872300, 11024862300 Owner’s Manual

®

WAILER LEVEL WAIIE R "_WERATURE SPEEDS

!

mm s Aerr_s/mM

ULI1RA CLEAN

PREWASH 4

SOAK

PERMANENT

PRESSI

Models/Modelos/Modeles 110.2485_, 2486_, 2487_

= color number, nL3merode color, numero de couleur

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Adjust to load size. Clothes should move freely. To change to a

higher water level after agitating starts, you may turn knob to

desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin

fabrics

You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe

for the fabric and follow garment label instructions. Some models

have AUTO TEMPERATURE CONTROL (ATC). ATC electronically

senses and maintains a uniform water temperature by regulating
temperature of incoming hot and cold water.

On models without AUTO TEMPERATURE CONTROL (ATC)that
do have a Warm/Cold/Warm Spray temperature setting, the

warm wash will be followed by an "Energy Saving" cold rinse
followed by warm spray rinses. This saves energy while providing

the same rinse performance.

WASH/ LOAD TYPE AGITATE/
SPIN SPEED SPIN SPEED

Heavy Sturdy or heavily High-speed

soiled loads agitation/

High-speed spin

Normal Normally soiled Low-speed agitation/

cottons & linens High-speed spin

Handwash/ Lingerie & Extra-low-speed

Casual loosely knit agitation/

items Low-speed spin

Handwash Plus Hand washable Extra-low-speed
Fine Delicates and special care agitation/Soak/

items Low-speed spin

Permanent Press I

A load cooling spray rinse reduces wrinkling.

Permanent Press II

During the wash cycle, the timer reaches PAUSE, and the washer

cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.

Ultra Clean

You may select this cycle for most loads.

Prewash

Helps to remove heavy soils and stains that need pretreatment. This

cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.

8543395 Cycle Selections continued

Automatic 2nd Rinse

Rinse & Spin

Removes excess detergent residue. May be automatically added

to the Ultra Clean or Permanent Press cycles. Set the RINSE
OPTIONS Control to 2nd Rinse before you start the washer. You

won't have to come back later to select a second rinse.

Soak

Features agitation followed by unlimited soak time to help

remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should reset the washer to a Spin

setting to remove water. The Soak cycle should be followed by an

Ultra Clean or Permanent Press cycle with additional detergent.

May be used when an extra rinse is needed to remove additional

detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control to One

Rinse and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics

by removing excess water. Set RINSE OPTIONS Control to One
Rinse and set the SPEEDS Control. You should then set Cycle

Selector (Timer) Control to a Spin setting.