Kenmore 11024852300, 11024732300, 11024722300, 11024712300, 11024692300 Owner’s Manual

®

WA_ER LEVEL WATER TEMPERATURE

mNSE

HEAVY DUTY _r /_A.rn

NONMAL

I_UBLR

Models/Modelos/Modeles 110.1421_, 1450_, 1485:_, 2462_, 2463_, 2464_, 2465_, 2466_, 2469_, 2471 _, 2472#, 2473_

= color number, nOmero de color, numero de couleur

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

CYCLE LOAD TYPE AGITATE/SPIN SPEED

Adjust to load size. Clothes should move freely. To change to a

higher water level after agitating starts, you may turn knob to

desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.

You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe

for fabric and follow garment label instructions.
On models with a Warm/Warm temperature setting, the warm

wash will be followed by an "Energy Saving" cold rinse followed

by warm spray rinses. This saves energy while providing the

same rinse performance.

Prewash Hand washable Extra-low speed

and special care agitation/SoaW

items Low-speed spin

Soak Heavily soiled or Low-speed agitation/

stained items Reset to Spin
that need

pretreatment

Permanent Press I

Get up to 10 minutes of wash time. When the timer reaches

Pause, the washer cools down the load by replacing some of the

wash water with rinse water. This helps to reduce wrinkling.

Heavy Duty

You should select a wash cycle based on the soil level and type
of fabric in your wash load.

CYCLE LOAD TYPE AGITATE/SPIN SPEED

Normal Normally soiled High- and low-speed

cottons and agitation/

linens High-speed spin

Use this cycle to get up to 14 minutes of wash time. You may

select this cycle for most loads.

Prewash

Helps to remove heavy soils and stains that need pretreatment. This

cycle should be followed by a Heavy Duty, Normal or Permanent

Press I cycle with additional detergent.

Heavy Duty Sturdy or heavily High-speed agitation/

soiled loads High-speed spin

Permanent Permanent press Low-speed agitation/
Press I blends and Low-speed spin

synthetic fabrics

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin

fabrics

8537392 Cycle Selections continued on next page

Soak

Manual Rinse & Spin

Features agitation followed by unlimited soak time to help

remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should reset the washer to a Spin

setting to remove water. The Soak cycle should be followed by an

Ultra Clean or Permanent Press cycle with additional detergent.

Automatic 2nd Rinse

Removes excess detergent residue. May be automatically added

to the Heavy Duty cycle by setting the RINSE OPTIONS Control
to 2nd Rinse before you start the washer. You won't have to

come back later to select a second rinse.

May be used when an extra rinse is needed to remove additional

detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control (if

available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics

by removing excess water. Set RINSE OPTIONS Control (if

available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Spin setting.