Kenmore 110.1421*, 110.1450*, 110.1485*, 110.2462*, 110.2463* Feature Sheet
...
Models/Modelos/Modèles
✼ = color number, número de color, numéro de couleur
110
.1421✼, 1450✼, 1485✼, 2462✼, 2463✼, 2464✼, 2465✼, 2466✼, 2469✼, 2471✼, 2472✼, 2473✼
WASHER CYCLE DESCRIPTIONS
This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.
Water Level Control
Adjust to load size. Clothes should move freely. To change to a
higher water level after agitating starts, you may turn knob to
desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.
Water Temperature Control
You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe
for fabric and follow garment label instructions.
On models with a Warm/Warm temperature setting, the warm
wash will be followed by an “Energy Saving” cold rinse followed
by warm spray rinses. This saves energy while providing the
same rinse performance.
Cycle Selector (Timer) Control
You should select a wash cycle based on the soil level and type
of fabric in your wash load.
CYCLE LOAD TYPE AGITATE/SPIN SPEED
Normal
Heavy Duty
Normally soiled
cottons and
linens
Sturdy or heavily
soiled loads
High- and low-speed
agitation/
High-speed spin
High-speed agitation/
High-speed spin
CYCLE LOAD TYPE AGITATE/SPIN SPEED
Prewash
Soak
Hand washable
and special care
items
Heavily soiled or
stained items
that need
pretreatment
Extra-low speed
agitation/Soak/
Low-speed spin
Low-speed agitation/
Reset to Spin
Permanent Press I
Get up to 10 minutes of wash time. When the timer reaches
Pause, the washer cools down the load by replacing some of the
wash water with rinse water. This helps to reduce wrinkling.
Heavy Duty
Use this cycle to get up to 14 minutes of wash time. You may
select this cycle for most loads.
Prewash
Helps to remove heavy soils and stains that need pretreatment. This
cycle should be followed by a Heavy Duty, Normal or Permanent
Press I cycle with additional detergent.
Permanent
Press I
Delicate
8537392
Permanent press
blends and
synthetic fabrics
Washable knits &
permanent press
fabrics
Low-speed agitation/
Low-speed spin
Low-speed agitation/
Low-speed spin
Cycle Selections continued on next page
Soak
Manual Rinse & Spin
Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should reset the washer to a Spin
setting to remove water. The Soak cycle should be followed by an
Ultra Clean or Permanent Press cycle with additional detergent.
Automatic 2nd Rinse
Removes excess detergent residue. May be automatically added
to the Heavy Duty cycle by setting the RINSE OPTIONS Control
to 2nd Rinse before you start the washer. You won’t have to
come back later to select a second rinse.
May be used when an extra rinse is needed to remove additional
detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control (if
available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set RINSE OPTIONS Control (if
available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Spin setting.
Loading...