Kenmore 11023732200, 11023722200, 11023712200, 11023692200, 11023662200 Owner’s Manual

®

WA_ER LEVEL WATER TEMPERATURE

m#ss

HEAVY DUTY _r/_A.rn

NONMAL

I_UBLR

Stock Nos./Reserva Nos./Stock nos.

12502, 12852, 13202, 13212, 22622, 22632, 22642, 23652, 23662, 23692, 23712, 23722, 23732

WASHER CYCLE DESCRIPTIONS

This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.

CYCLE LOAD TYPE AGITATE/SPIN SPEED

Adjust to load size. Clothes should move freely. To change to a

higher water level after agitating starts, turn knob to desired

setting. On models with Variable Water Level Control, turn the

knob to Reset, then to desired setting.

You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe

for fabric and follow garment label instructions.

Prewash Hand washable Extra-low speed

and special care agitation/SoaW

items Low-speed spin

Soak Heavily soiled or Low-speed agitation/

stained items Reset to Spin
that need

pretreatment

Permanent Press I

A load cooling spray rinse reduces wrinkling.

You should select a wash cycle based on the soil level and type
of fabric in your wash load.

CYCLE LOAD TYPE AGITATE/SPIN SPEED

Heavy Duty

Use this cycle to get up to 14 minutes of wash time, You may

select this cycle for most loads.

Normal Normally soiled High- and low-speed

cottons and agitation/

Prewash

linens High-speed spin

Helps to remove heavy soils and stains that need pretreatment. This

Heavy Duty Sturdy or heavily High-speed agitation/

soiled loads High-speed spin

cycle should be followed by a Heavy Duty, Normal or Permanent

Press I cycle with additional detergent.

Permanent Permanent press Low-speed agitation/
Press I blends and Low-speed spin

synthetic fabrics

Delicate Washable knits & Low-speed agitation/

permanent press Low-speed spin

fabrics

8537145 Cycle Selections continued on next page

Soak

Manual Rinse & Spin

Features agitation followed by unlimited soak time to help

remove heavy soils and stains that need pretreatment. When
finished soaking, reset the washer to a Spin setting to remove

water. The Soak cycle should be followed by an Ultra Clean or

Permanent Press cycle with additional detergent.

Automatic 2nd Rinse

Removes excess detergent residue, May be automatically added

to the Heavy Duty cycle by setting the RINSE OPTIONS Control
to 2nd Rinse before you start the washer, You won't have to

come back later to select a second rinse.

You may use a manual Rinse and Spin if an extra rinse is needed
to remove additional detergent residue, You should set the

WATER LEVEL Control, the WATER TEMPERATURE Control. The

RINSE OPTIONS Control (if available) should be set to One Rinse,
You should then set the Cycle Selector (Timer) Control to a Rinse
setting,

Spin Only

A drain and spin may help shorten drying times for some fabrics

by removing excess water. The RINSE OPTIONS Control (if
available) should be set to One Rinse, You should then set the

Cycle Selector (Timer) Control to a Spin setting.