Models/Modelos/Modèles 110.1571 , 1572 , 1573 , 1584 , 1585 , 1586= color number, número de color, numéro de couleur
WASHER CYCLE DESCRIPTIONS
This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and features described.
Water Level Control
Adjust to load size. Clothes should move freely. To change to a higher water level after agitating starts, you may turn knob to desired setting. On models with Variable Water Level Control, you should turn the knob to Reset, then to desired setting.
Water Temperature Control
Temperatures in this Energy Star washer differ from temperatures you may be used to in conventional washers. They are designed to provide maximum energy efficiency while delivering optimal cleaning results.
You should select the wash/rinse water temperature based on the type of load you are washing. Always use the warmest wash water safe for the fabric and follow garment label instructions. Some models have AUTO TEMPERATURE CONTROL (ATC). ATC electronically senses and maintains a uniform energy saving water temperature by regulating the temperature of incoming hot and cold water.
Speeds Control
WASH/ |
LOAD TYPE |
AGITATE/ |
SPIN SPEED |
|
SPIN SPEED |
|
|
|
Heavy Duty |
Sturdy or heavily |
High-speed |
|
soiled loads |
agitation/ |
|
|
High-speed spin |
|
|
|
Normal |
Normally soiled |
Low-speed agitation/ |
|
cottons & linens |
High-speed spin |
|
|
|
Delicate |
Washable knits & |
Low-speed agitation/ |
|
permanent press |
Low-speed spin |
|
fabrics |
|
|
|
|
Handwash/ |
Lingerie & |
Extra-low speed |
Casual |
loosely knit |
agitation/ |
|
items |
Low-speed spin |
|
|
|
8543668 |
Continued on next page |
Cycle Selector (Timer) Control
Permanent Press I
A load cooling spray rinse reduces wrinkling.
Ultra Clean
You may select this cycle for most loads.
Prewash
Helps to remove heavy soils and stains that need pretreatment. This cycle should be followed by an Ultra Clean or Permanent Press I cycle with additional detergent.
Soak
Features agitation followed by unlimited soak time to help remove heavy soils and stains that need pretreatment. After the soaking has finished, you should reset the washer to a Spin setting to remove water. The Soak cycle should be followed by an Ultra Clean or Permanent Press I cycle with additional detergent.
Automatic 2nd Rinse
Removes excess detergent residue. May be automatically added to the Ultra Clean or Permanent Press I cycles. Set the RINSE OPTIONS Control to 2nd Rinse before you start the washer. You won’t have to come back later to select a second rinse.
Rinse & Spin
May be used when an extra rinse is needed to remove additional detergent residue. Set WATER LEVEL Control, then WATER TEMPERATURE Control. Set RINSE OPTIONS Control to One Rinse, and set the SPEEDS Control. You should then set Cycle Selector (Timer) Control to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics by removing excess water. Set RINSE OPTIONS Control to One Rinse, and set the SPEEDS Control. You should then set Cycle Selector (Timer) Control to a Spin setting.