Kenmore 10652584202, 10652584201, 10652584200, 10652583202, 10652583201 Owner’s Manual

...

Kenmore 10652584202, 10652584201, 10652584200, 10652583202, 10652583201, 10652582202, 10652582200, 10652574202, 10652574201, 10652572202, 10652572201, 10652544102, 10652544101, 10652544100, 10652542102, 10652542101, 10652542100, 10652534101, 10652532101, 10652524101, 10652524100, 10652522101, 10652514102, 10652514101, 10652514100, 10652512102, 10652512101, 10652512100, 10652284202, 10652284201, 10652282202, 10652282201, 10652282200, 10652274202, 10652274201, 10652272202, 10652244101, 10652242102, 10652242101, 10652234101, 10652232101, 10652224102, 10652224100, 10652222102, 10652222101, 10652222100, 10652214104, 10652214103, 10652214102, 10652214101, 10652214100, 10652212104, 10652212103, 10652212102, 10652212101, 10652212100, 10652014104, 10652014103, 10652014102, 10652014101, 10652014100, 10652012104, 10652012103, 10652012102, 10652012101, 10652012100, 10651744100, 10651742100, 10651584201, 10651584200, 10651582201, 10651582200, 10651574201, 10651574200, 10651572201, 10651572200, 10651569104, 10651569103, 10651569102, 10651564104, 10651564103, 10651564102, 10651564100, 10651562101, 10651559103, 10651559102, 10651559100, 10651554103, 10651554102, 10651552104, 10651552103, 10651552101, 10651552100, 10651544100, 10651542100, 10651524100, 10651514101, 10651512101, 10651512100, 10651284201, 10651284200, 10651282201, 10651282200, 10651274201, 10651272201, 10651272200, 10651269104, 10651269103, 10651269102, 10651264105, 10651264104, 10651264101, 10651262104, 10651262103, 10651262101, 10651259104, 10651259102, 10651259101, 10651254104, 10651254103, 10651254102, 10651252104, 10651252103, 10651252101, 10651214100, 10651069101, 10651064100, 10651062101, 10651062100, 10651049101, 10651049100, 10651044101, 10651044100, 10651042101, 10651042100, 10652582201, 10651522100, 10651514100, 10651569101, 10651564101, 10651562102, 10651562100, 10651559101, 10651554104, 10651554101, 10651552102, 10651269101, 10651262105, 10651259103, 10651254101, 10651224100, 10651222100, 10651212100, 10651064101 Owner’s Manual

Side by Side Refrigerator

Use & Oa_e Guide

Refrigerador de dos puertas

Manual c_0 cuid _,J_

y_ '_ cte uso y ado

R6frig6rateur c6te & c6te

Guideo"__,,_0ctuti/isa_o_ et d°entt_etien

Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com

2220695 Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.ca

OF CONTENTS WARRANTY

WARRANTY ..................................................................................... 2

REFRIGERATOR SAFETY .............................................................. 3

REFRIGERATOR INSTALLATION ................................................. 4

Unpacking .................................................................................... 4

Location Requirements ................................................................ 4

Electrical Requirements ................................................................ 5

Base Grille .................................................................................... 5

Door Removal ............................................................................... 6

Door Closing and Alignment ........................................................ 8

Water Supply Connection ............................................................ 8

Water System Preparation ........................................................... 9

Normal Sounds ............................................................................. 9

REFRIGERATOR USE .................................................................... 9

Ensuring Proper Air Circulation .................................................... 9

Using the Controls ..................................................................... 10

Water and Ice Dispensers ......................................................... 10

Water Filtration System ............................................................. 11

Ice Maker and Storage Bin/Bucket ........................................... 12

REFRIGERATOR FEATURES ..................................................... 13

Refrigerator Shelves .................................................................. 13

Flip-up Shelf .............................................................................. 14

Adjustable Flip-up Shelf ............................................................ 14

Dell Drawer ................................................................................ 14

Convertible Vegetable/Meat Drawer, Crisper and Covers ....... 14

Convertible Vegetable/Meat Drawer Temperature Control ...... 14

Crisper Humidity Control ........................................................... 15

Wine or Can/Bottle Rack ........................................................... 15

Utility Bin .................................................................................... 15

FREEZER FEATURES ................................................................. 15

Freezer Shelf .............................................................................. 15

Freezer Basket or Bin ................................................................ 16

DOOR FEATURES ....................................................................... 16

Door Rails .................................................................................. 16

Can Racks and Door Bins ......................................................... 16

REFRIGERATOR CARE ............................................................... 16

Cleaning ..................................................................................... 16

Changing the Light Bulbs .......................................................... 17

Power Interruptions ................................................................... 18

Vacation and Moving Care ........................................................ 18

TROUBLESHOOTING .................................................................. 18

SERVICE ....................................................................................... 21

In the U.S.A ................................................................................ 21

In Canada .................................................................................. 22

Accessories ............................................................................... 22

WATER FILTER CERTIFICATIONS ............................................ 22

PRODUCT DATA SHEETS .......................................................... 23

ONE-YEAR FULL WARRANTY ON REFRIGERATOR

For one year from the date of purchase, when this refrigerator is operated and maintained according to instructions attached to or furnished with the product, Sears will repair this refrigerator, free of charge, if defective in material or workmanship.

FIVE-YEAR FULL WARRANTY ON SEALED REFRIGERATION

SYSTEM

For five years from the date of purchase, when this refrigerator is operated and maintained according to owner's instructions attached to or furnished with the product, Sears will repair the sealed system (consisting of refrigeration, connecting tubing, and compressor), free of charge, if defective in materials or workmanship.

The above warranty coverage applies only to refrigerators which are used for storage of food for private household purposes and excludes original and replacement Kenmore Filtered Ice & Water filter cartridges (if equipped with the filter system). Original and replacement cartridges are warranted for 30 days, parts only, against defects in material or workmanship.

WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE

NEAREST SEARS SERVICE CENTER IN THE UNITED STATES OR CANADA.

This warranty applies only while this product is in use in the United States or Canada. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

Warranty terms may vary in Canada. Contact your local Sears Service Center for complete details.

Sears, Roebuck and Co.

Dept. 817WA, Hoffman Estates, IL 60179

Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8

Product Record

In the space below, record your complete model number, serial number, and purchase date. You can find this information on the

model and serial number label located on the inside wall of the refrigerator compartment.

Have this information available to help you obtain assistance or service more quickly whenever you contact Sears concerning your refrigerator.

Model number 106.

Serial number

Purchase date

Save these instructions and your sales receipt for future reference.

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This symbol alerts you to potential hazards that can killor hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or

This is the safety alert symbol. "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IM PORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic

precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all panels before operating.

• Remove doors from your old refrigerator.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline, away from refrigerator.

• Use two or more people to move and install refrigerator.

• Disconnect power before installing ice maker (on ice maker kit ready models only).

• Use a sturdy glass when dispensing ice or water (on some models).

SAVE THESE INSTRUCTIONS

Proper Disposal of

Your Old Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator. Failure to do so can result in death or

brain damage.

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are still dangerous

- even if they will sit for "just a few days." If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.

Before you throw away your old refrigerator or freezer:

• Take off the doors.

• Leave the shelves in place so that children may not easily climb inside.

REFRIGERATOR

INSTALLATION

_'_.-_ _ _ _ A¸_ o_e,

Excessive Weight Hazard

Use two or more people to move and install refrigerator,

Failure to do so can result in back or other injury,

Removing packaging materials

• Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

• Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the "Refrigerator Safety" section.

When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator

for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or "walk" the refrigerator when trying to move it, as floor damage could occur.

Cleaning before use

After you remove all of the packaging materials, clean the inside

of your refrigerator before using it. See the cleaning instructions in the "Refrigerator Care" section.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter

into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re-

moving them to avoid impact from dropping.

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator,

Failure to do so can result in death, explosion, or fire,

To ensure proper ventilation for your refrigerator, allow for 1/2in. (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

I II I

1/2" (1.25 cm)

l_=

2" (5.08 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in

death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical

connection:

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded

electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord. NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

To remove the base grille:

1. Open both refrigerator doors.

2. Place hands along the ends of the grille, with your thumbs along the top. Push in with your thumbs and pull up on the

bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.

To replace the base grille:

1. Open the doors.

2. Line up the grille support tabs with the metal clips.

3. Push the grille firmly to snap it into place.

TOOLS NEEDED: 1/4in., 1/_in., and 5A6in. hex-head socket wrenches, a flat-head screwdriver and a Phillips screwdriver.

IMPORTANT: Before you begin, turn the refrigerator control OFF, unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors.

Electrical Shock Hazard

Disconnect power before removing doors. Reconnect both ground wires before operating.

Failure to do so can result in death or electrical shock.

Top Left Hinge

1. Do Not Remove Screw

Water Dispenser

Tubing Connection

1. Red Outer Ring

Door Removal

Top Right Hinge

1. Do Not Remove Screw

Handle Removal (Optional)

Base Grille

Bottom Hinge

1. Do Not Remove Screw

NOTE: It may only be necessary to remove either the door handle or the doors to get your product through the doorway of your

residence. Measure the door opening to determine whether to remove the refrigerator handles or the doors.

Handle Removal (optional)

Apply firm pressure with your hand on the face of trim. Slide top trim up and bottom trim down away from handle. Lift trim pieces off shoulder screws (see Graphic 1).

Remove handle screws and handles.

Move refrigerator into place. Replace handles as shown (see Graphic 1).

Door Removal

Door and Hinge Replacement

1. Replace both bottom hinges, if removed. Tighten screws.

2. Assistance may be needed to feed the water line through the bottom hinge while reinstalling the freezer door. Carefully feed the dispenser tubing through the bottom left hinge before replacing the door on the hinge.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets

to hold the doors in place while you are working.

3. Reconnect water dispenser tubing by pushing tubing into fitting until it stops and black mark touches face of fitting (see Graphic 3). On some models, replace tubing in hose clip.

4. Align and replace the top left hinge as shown (see Graphic 4). Tighten screws.

Electrical Shock Hazard

Disconnect power before removing doors. Failure to do so can result in death or

electrical shock.

1. Unplug refrigerator or disconnect power.

2. Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners (see Graphic 2).

3. Close both doors and keep them closed until you are ready to lift them free from the cabinet.

4. If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille on the freezer door side (see Graphic 3).

• Press red outer ring against the face of fitting and pull the

dispenser tubing free.

• On some models, remove tubing from hose clip.

5. Remove top left hinge screw and cover as shown (see Graphic 4).

6. Disconnect wiring plug and both ground wires from ground wire screw (on some models) as shown (see Graphic 4).

7. Remove remaining left hinge screws and hinge as shown (see Graphic 4). Do not remove screw 1.

8. Carefully lift freezer door straight up off bottom hinge (see Graphic 5). The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.

9. Remove top right hinge cover and screws as shown (see Graphic 6). Do not remove screw 1.

10. Lift the refrigerator door straight up off bottom hinge.

11. It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have

similar construction.

• Disassemble the hinges as shown (see Graphic 7). Do not

remove screw 1.

Electrical Shock Hazard

Reconnect both ground wires. Failure to do so can result in death or

electrical shock.

Style 1

• Reconnect both ground wires.

• Reconnect wiring plug.

S: de l

Style 2

• Reconnect wiring plug.

5. Replace left hinge cover and screws.

6. Replace the refrigerator door by carefully lifting the door onto the bottom right hinge.

7. Align and replace the top right hinge as shown (see Graphic 6). Tighten screws.

8. Replace hinge cover and screws. Tighten screws.

9. Plug into a grounded 3 prong outlet.

'_ _ S_C _ _ _ __ "_

Door Closing

1. Move the refrigerator into its final position.

2. Place a level inside the refrigerator at the back of the top shelf (see Graphic 8).

3. Locate the leveling screws behind the base grille of the refrigerator on either side.

4. Use a hex-head socket wrench to adjust the rear roller leveling screws until the refrigerator is level. Turn the rear roller leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side (see Graphic 9). Make sure refrigerator is level before proceeding.

5. Check the door alignment after leveling the refrigerator.

Locate a _/2in. to 1V4in. (1.25 cm to 3.18 cm) vertical COLD water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the

water pipe. Add 7 ft. (2.1 m) to allow for cleaning. Use V4in. (6.35 mm) O.D. (outside diameter) copper tubing. Be sure

both ends of copper tubing are cut square.

Using a grounded drill, drill a V4in. hole in the cold water pipe you have selected.

Door Alignment

If the doors are uneven after leveling the product (see Graphic 10), follow the steps below.

1. Use a hex-head socket wrench to adjust the front roller leveling screws until the doors are even. Turn the front roller leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side (see Graphic 11).

NOTE: Open and close both the refrigerator and freezer doors after each adjustment to check the door alignment.

2. Open the doors and replace the base grille. Line up the grille support tabs with the metal clips. Push the grille firmly to snap it into place.

NOTE: Be sure to refasten the Tech Sheet behind the base grille.

Supply Con

Read all directions carefully before you begin.

IMPORTANT:

• If you turn the refrigerator on before the water line is connected, turn the ice maker OFR

• All installations must meet local plumbing code requirements.

• Use copper tubing and check for leaks. Install copper tubing only in areas where temperatures will remain above freezing.

Tools required: Standard screwdriver, 7/16in. and V2in. open-end

wrenches or two adjustable wrenches, V4in. nut driver and drill bit, hand drill or electric drill (properly grounded).

NOTE: Your refrigerator dealer has a kit available with a V4in. (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or 3/1ein. (4.76 mm) saddle valve which reduces water flow and clogs more easily.

Cold water supply

Connect the ice maker to a cold water line with water pressure between 30 and 120 psi. If you have questions about your water pressure, call your utility company.

Connecting to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

1. Cold Water Pipe 5. Compression Sleeve

2. Pipe Clamp 6. Shutoff Valve

3. Copper Tubing 7.Packing Nut

4. Compression Nut

6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the V4in. drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connecting to Refrigerator

Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall.

Turn shutoff valve ON.

Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

_ .41 1

......................2

1.Tube Clamp

2. Copper Tubing

4. The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the V4in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

5. Plug in refrigerator or reconnect power.

3. Compression Nut

4. ValveInlet

+ 16 hidden pages